GLT0 and GLPCT tables

Hi all
Can anyone tell me whats the purpose of the tables GLT0 and GLPCT? The table GLT0 has fields TSL01 through TSL16 with same field text name as "currency"? whats difference among all these fields?
Explain me the use of these two tables along with fields, please !
Thanks
Shakir

Hi Shakir,
GLT0 is used for getting transaction figures for GL accounts while GLPCT is used for Profit Center accounting. These tables are updated as a part of FI-SL i.e special ledgers where you define ledgers for reporting purposes.
SAP has divided periods on the basis of 1 - 16 based on fiscal year variant. If a company divided year into 12 periods then only TSL01 to TSL12 will be populated or if its divided into 16 period then TSL01 to TSL16 fields will be populated. TSL is used for storing amount in Transaction currency then there is HSL (company code currency) , KSL ( for local currency) etc.
Cheers,
Vikram
Pls reward for helpful replies!!

Similar Messages

Profit center data in GLPCA and GLPCT Tables

Hi ,
We are in ECC 6 but with classic GL and profit center accounting.
We have the documents posted with profit center as the assignment object. When i check the documents through document display i could see the profit center in it , but when i execute the transactions 5KEZ , 2KEE i couldnt fetch any data. Actually there is no data updated to the GLPCA and GLPCT Tables.
These accounts are Frieght clearing , benefits clearing etc...
My actual requirement is the ending balances of GL accounts by profit center subtotals/ GL Trial balance by profit center .
Thank you.

Hi
If these are balance sheet accounts, you need to run period end transactions like 1KE* to transfer the balances to EC-PCA
also, Tick the "Online Transfer" in EC-PCA config & Specify these accounts in 3KEH and then post a transaction.... It should get transferred online on real time basis
Br, Ajay M

Difference in Balance Report and FS10N table GLPCT

Dear Experts,
We are facing one issue in Report which had prepared through report painter. We were using GLPCT table to prepare this report. The balance is coming correctly upto operating margin. After operating margin balance is not coming correct. This is mostly Balance Sheet items like Debtors, Creditors, Inventory.
For example GL 134002 (Inventory) is showing amount in Rs. 258178 in this report (EVA) April period and in FS10N the same GL balance is appearing is Rs. 1632599.60.
We did the analysis is that it may be not picking correct opening balance. But unable to find out the correct reason.
What could be the reason for this difference in this report. Please advice.
Thanks & Regards,
Pankaj

Hi Friends,
Thanks for your support, Actual this issue happend due to PCA BCF has not happend but when i execute KE5T then it is not showing any difference FI & PCA. I have mentioned company code XYZ, Fiscal year 2011, from period 1 to 12 and account number in KE5T. But it is not showing difference.
Can you please suggest how can I run this KE5T in the system.
Thanks & Regards,
Pankaj

Report to display total and detail from table GLT0 and FBL3N

hi guys,
we have the requirement to show a report with total amount per GL account from table GLT0 and to as well display the detail from tcode FBL3N ..
shall i use normal report via SE38, if yes, what is the table that stores detail from FBL3N or does report painter support the above requirement..pls advice

use report SAPF070 as sample
(compare documentation!)
hope that helps
Andreas

How table GLT0 work? (Different value between GLT0 and BSAS)

Anyone know about how the table GLT0 work?
After checked in sapenote sapnote 100273 which said "For an FI posting (for example, with Transaction FB01),
the balances resulting from the posting are updated twice in the G/L Account Monthly
Debits and Credits (table GLT0)."
So, Any change amount value of items in accounting doc. This problem should to update, correct?
For any change of amount value in item of accounting doc and currencies is change.
Need to reupdate this table with new currencies? or any logic
Now, I found a problem is "Account balance" value in currency group (USD) in transaction FS10
and total sum of "USD Amount" in transaction code FBL3 (If click to sum by currency)
are different for 17.79 USD.
I tried to get a logic of this 2 transaction code and found detail as below:
FS10 : Get data from table GLT0 and for group currency report. Program select data
from field KSLVT and KSLXX to display in report.
FBL3 : Get all data until selected period in table BSAS and sum total amount from field BSAS-DMBE2
(Amount of USD Currency)
Actually, This 2 report should to have the same account balance.
So, My question is
1. When the table (GLT0) update?
2. Can have a problem with the data in GLT0 (field KSLVT and KSLXX t)
and sum of amount USD curency BSAS-DMBE2 are differenct?
If can have, how is occur?
Many thank in advance.

Hi,
Did you find any relationship between the data (sql data and Essbase)?
While you are loading fresh data, there is no discrepancy.
You find discrepancy at the time of incremental loading.
It might be possible in incremental loading data can be added to already existing value in dimension.
In that case you will find your Essbase data is 2times or 3 times more than base data (sql).
Then check there might be some setting.
Thanks
Dhanjit G

Initial Balances for some of the G/L Accounts in GLPCT table changed

Sub : G/L Account Balance( T code FAGLB03 ) and EC-PCA: Totals Table (Table GLPCT) initial balances are not same for some of the G/L accounts ( Initial Balances for some of the G/L Accounts and profit centers in GLPCT table changed )
Dear Friends
We are in SAP ECC 5.0. We are using New G/L Accounting
G/L Account Balance(Initial Balance)( T code FAGLB03 ) and EC-PCA: Totals Table (Table GLPCT) initial balances are not same for some of the G/L accounts ( Initial Balances for some of the G/L Accounts and Profit centers in GLPCT table changed )
G/L Account : 1110001 AR Trade - Recon
G/L Account Initial Balance( T code FAGLB03 )          36,789,209.26 USD
EC-PCA: Totals initial balance (GLPCT table)                14,178,848.14 USD
I found in GLPCT table initial balances for G/L 1110001 and some of the profit centers are changed. The initial balances are not supposed to change for the entire financial year
I have checked   none of documents for this G/L and these Profit centers of last financial year have been posted or reversed in current financial year.
Please try to help me what has caused to changed the initial balances and how to correct it
Please let me know if you guys need more details
Thanks in advance
Thanks
MVS

Hi Vinay,
If I understood correctly you are trying to balance Accumulated Depreciation accounts (from the AA module) with the Cost Depreciation Accounts.
If they don`t balance zero, it mostly likely means, that some user has posted manually deprecian in your GL, not using the depreciation program.
Hope this helps.
KR
Severina Koleva

Differnce between GLPCA and GLPCT

Dear Viewers,
Amount in Table GLPCA and Table GLPCT is looking different. Hence in the report display and line item totals are looking different.
Can any one tell me how to correct these discrepency in GLPCT table.
Thanks
Aswin

Hi,
Please, refer to note 180906.
Regards,
Eli

Cost Center in 0EC_PCA_1 or KOSTL in GLPCT table ???

Hi,
I'm buiding a Cube with two data source 0EC_PCA_1 (For PLAN) and 0EC_PCA_3 (For actuals). Now I could load the data in to Cube and my report is showing correct, except thatmy plan values are not showing as cost center is not available in EC_PCA_1 (GLPCT table). I tried to enhance it from 0cost_center master , but the cost centeres are not populated correctly. Does any one have any idea or any one worked this scenerio before...All I need is Cost center info for plan values from EC_PCA_1...
Please advice

Sam,
Could you share your solution. I am running into the same issue.
Thanks,
Vin

Sy-tabix in relation to LOOP AT and READ TABLE

Hi All,
As per SAP documentation,
1) While looping through an internal table (LOOP AT), sy-tabix contains the index number of current row(for standard and sorted tables)
2)When successfully reading from an internal table(READ TABLE), sy-tabix is set to the index of the result row.
But what happens when READ TABLE is used while looping through another internal table?
i.e. Loop at TAB1...
write sy-tabix.
READ TABLE TAB2...
write sy-tabix.
endloop.
If we are looping through 1st row of TAB1 and the result of read statement is found in 3rd row of TAB2, I expected that sy-tabix before READ would be 1 and after the READ be 3.
But, I found that sy-tabix remains unchanged at 1. Can someone expalin why?
Thanks,
Jagan

Hi
If after reading the table TAB2 the system variable SY-TABIX has still the previous value, that menas the READ TABLE fails or it was read the first record of TAB2.
After READ TABLE TAB2 try to check the SY-SUBRC:
LOOP AT TAB1.
   WRITE: / 'TAB1 index:', SY-TABIX.
   READ TABLE TAB2 .........
   IF SY-SUBRC = 0.
     WRITE: 'TAB2 index:', SY-TABIX.
Try this:
DATA: BEGIN OF ITAB OCCURS 0,
        FIELD1,
      END   OF ITAB.
DATA: BEGIN OF ITAB2 OCCURS 0,
        FIELD1,
      END   OF ITAB2.
DATA: INDEX TYPE I.
DO 10 TIMES.
APPEND ITAB.
ENDDO.
DO 10 TIMES.
APPEND ITAB2.
ENDDO.
LOOP AT ITAB.
WRITE: / 'ITAB:', SY-TABIX.
INDEX = SY-TABIX + 2.
READ TABLE ITAB2 INDEX INDEX.
IF SY-SUBRC = 0.
    WRITE: 'ITAB2:', SY-TABIX.
ENDIF.
ENDLOOP.
Max

In Answers am seeing "Folder is Empty" for Logical Fact and Dimension Table

Hi All,
Am working on OBIEE Answers, on of sudden when i clicked on Logical Fact table it showed me as "folder is empty". I restarted all the services and then tried still showing same for Logical Fact and Dimension tables but am able to see all my reports in Shared Folders. I restarted the machine too but no change. Please help me out to resolve this issue.
Thanks in Advance.
Regards,
Rajkumar.

First of all, follow the forum etiquette :
http://forums.oracle.com/forums/ann.jspa?annID=939
React or mark as anwser the post that the user gave.
And for your question, you must check the log for a possible corrupt catalog :
OracleBIData_Home\web\log\sawlog0.log

Best practice when FACT and DIMENSION table are the same

Hi,
In my physical model I have some tables that are both fact and dimension table, i.e. in the BMM they are of course separated into Fact and Dim source (2 different units) and it works fine. But I can see that there will be trouble when having more fact tables and I e.g. have a Period dimension pointing to all the different fact tables (different sources).
Seems like the best solution to this is to have an alias of the fact/transaction table and have 2 "copies" of the transaction table (one for fact and one for dimension table) in the physical layer. Only bad thing is that there will then allways be 2 lookups in the same table when fetching data from the dimension and the fact table.
This is not built on a datawarehouse - so the architecture is thereby more complex. Hope this was understandable (trying to make a short story of it).
Any best practice on this? Or other suggestions.

Id recommend creation of a view in the database. if its an oracle DB, materialised views would be a huge performance benefit. you just need to make sure that the MVs are updated when the source is updated.
-Domnic

Difference between YVBUK and XVBUK tables

Hello,
   Can somebody explain me the user of Y* and X* tables for application tables such as VBUK, LIKP etc. in user exits?
According to note 415716 Y* tables store the condition of the record currently in the database and X* tables stores the changed value. But what happens if its a new record (UPDKZ = I), shouldnt Y* table be blank?
We have the following code in the user exit
INCLUDE YVUEPRZ1_DOC_SAVE_PREP_CARRIER                             *
perform update only if insert or update carrier
UPDKZ : Update indicator
DATA : ls_vbpa LIKE xvbpa.
LOOP AT xlikp.
v_index = sy-tabix.
CLEAR ls_vbpa.
READ TABLE xvbpa INTO ls_vbpa
                   WITH KEY vbeln = xlikp-vbeln
                            parvw = 'SP'.
CASE ls_vbpa-updkz.
    WHEN 'I' OR 'U'.
      MOVE-CORRESPONDING xlikp TO likp.
      MOVE-CORRESPONDING xlikp TO likpd.
*--   Prepare changes of the delivery header
      PERFORM likp_bearbeiten_vorbereiten(sapfv50k).
      likp-yylfnr = ls_vbpa-lifnr.
*--   Check and confirm changes
      PERFORM likp_bearbeiten(sapfv50k).
      MOVE-CORRESPONDING likp TO xlikp.
      MOVE-CORRESPONDING likpd TO xlikp.
      MODIFY xlikp INDEX v_index.
      IF t180-trtyp = 'V'. "Modification
        xvbuk-uvk03 = 'D'.
        xvbuk-updkz = 'U'.
        MODIFY xvbuk TRANSPORTING uvk03 updkz WHERE vbeln = xlikp-vbeln.
      ENDIF.
    WHEN 'D'.
      MOVE-CORRESPONDING xlikp TO likp.
      MOVE-CORRESPONDING xlikp TO likpd.
*--   Prepare changes of the delivery header
      PERFORM likp_bearbeiten_vorbereiten(sapfv50k).
      CLEAR likp-yylfnr.
*--   Check and confirm changes
      PERFORM likp_bearbeiten(sapfv50k).
      MOVE-CORRESPONDING likp TO xlikp.
      MOVE-CORRESPONDING likpd TO xlikp.
      MODIFY xlikp INDEX v_index.
      IF t180-trtyp = 'V'. "Modification
        xvbuk-uvk03 = 'D'.
        xvbuk-updkz = 'U'.
        MODIFY xvbuk TRANSPORTING uvk03 updkz WHERE vbeln = xlikp-vbeln.
      ENDIF.
ENDCASE.
ENDLOOP.
Now the problem is that SAP is saying that the table YVBUK also has to have the same record as XVBUK but I think its absurd for UPDKZ = I since there will be no database image for that.
thanks

To answer Peluka's question there are no entries in Y* table when UPDKZ = I or UPDKZ = U
and I dont quite understand what Ferry Lianto is saying but I think its pretty much the same as above
thanks for your help

Difference between Temp table and Variable table and which one is better performance wise?

Hello,
Anyone could you explain What is difference between Temp Table (#, ##) and Variable table (DECLARE @V TABLE (EMP_ID INT)) ?
Which one is recommended to use for better performance?
also Is it possible to create CLUSTER and NONCLUSTER Index on Variable table?
In my case: 1-2 days transactional data are more than 3-4 Millions. I tried using both # and table variable and found table variable is faster.
Is that Table variable using Memory or Disk space?
Thanks Shiven:) If Answer is Helpful, Please Vote

Check following link to see differences b/w TempTable & TableVariable: http://sqlwithmanoj.com/2010/05/15/temporary-tables-vs-table-variables/
TempTables & TableVariables both use memory & tempDB in similar manner, check this blog post: http://sqlwithmanoj.com/2010/07/20/table-variables-are-not-stored-in-memory-but-in-tempdb/
Performance wise if you are dealing with millions of records then TempTable is ideal, as you can create explicit indexes on top of them. But if there are less records then TableVariables are good suited.
On Tables Variable explicit index are not allowed, if you define a PK column, then a Clustered Index will be created automatically.
But it also depends upon specific scenarios you are dealing with , can you share it?
~manoj | email: http://scr.im/m22g
http://sqlwithmanoj.wordpress.com
MCCA 2011 | My FB Page

Performance syntax loop at and read table

in the routine , for reading one line in a internal table , the syntaxe
loop at xxx where and read tabl exxx with key XXXX
has a great difference on performance or not?

Loop at statement is used only for processing multiple records.Read table is used for reading a particluar record of an internal table.If you just need to check whether record exists in internal table, use can sort and use binary search with TRANSPORTING NO FIELDS addition. Also, try to use field symbols so that performance is increased.

No data in cube,but there is data in F and E table, also in dimension table

Hi, gurus,
I successfully loaded more than 100,000 records of data into an infocube, but when I check the content of the infocube(without any restriction), unexpectedly no data displayed, also after I checked the F and E table, still no data, but there is data in dimendsion tables. what happened?
please help. thanks a lot.

Hi Kulun Rao,
Try the following options.
Check in the selection screen
Go to infocube through LISTCUBE t.code
Check the compression and roll-up statuses.
Check the reporting status in request tab.
Refresh the cube ( u already do it)
Check the index status in Request tab**
might be these things will help u.
Regards,
HARI GUPTA

GLT0 and GLPCT tables

Similar Messages

Maybe you are looking for