GLT2201 error while settling AuC to Final Asset through KO88

Hello,
We have a scenario where in I am settliing an AuC through KO88 to the final Asset but am getting Document splitting error GLT2201. Profit Center is maintained in the Cost Center assigned to the Asset Master and also in the Internal Order. I could settle from the P/L account to the AuC asset when i ran KO88 earlier but its not allowing settling from AuC to the Final Asset.
We are using Parallel Ledger and I have defined 2 additional depreciation areas, 30 for posting only depreciation (real area) and 60 for posting only APC (derieved area). I have maintained ACSET for all the depreciation areas. I feel the error is due to Parallel Ledger but I am unable to figure out how and where.
Can anybody help me out please.
Thanks,
Rajat Gupta

Hello,
I managed to resolve the error, some how by oversight Profit Center was suppressed in the Field Status of Asset G/Ls though Cost Center was Optional. I changed the Profit Center Field Status to Optional and it worked.
But I am wondering how it allowed KO88 to run while settling from the Cost Element (P/L GL) to the AuC because they both used the same Field Status?
Thanks,
Rajat Gupta

Similar Messages

Error while settlement of IO to Asset

Dear Experts,
We are settling IO to multiple assets using KO88 and get the below error , any tips would assist
System error: Master area for proof of origin not found
Message no. AW 666
regards
Diwakar

Hi,
You should check if depreciation area 01 is activated. If not, activate it and it should allow settlement.
Or could it be that you possibly have no depreciation area 01 in the AuC?
In such a case when there is no depreciation area 01 present in AUC, it is NOT possible to post from an internal order to an asset under construction.
If you do not want values in depreciation area 01, you can customize a capitalization key in the AuC. Please refer to the documentation on this functionality.
This inforamtion should help you to resolve AW 666 when trying to settle an Internal Order.
Kind regards,
Brigitte Kuehni

Error while doing AUC Settlement in KO88

Hi
I am getting the below error while doing KO88. I have maintained the Allocation structure for FXA and given the cost element group in the Source field & Given FXA in Receiver category and selected By cost element option aginast Receiver category FXA in Settlement Cost Element field. I am getting the below error while settling in KO88.
Define a settlement cost element for receiver type FXA
Message no. KD506
Diagnosis
In allocation structure A1 (controlling area BP01), you did not define which cost element should be used when settling costs/revenues of the sender. Nor did you define receiver type FXA.
Procedure
Assign a different allocation structure to the settlement sender (-> Master data -> Settlement rule -> Goto -> Settlement parameters), or maintain allocation structure A1.
Please help me
Thanks
Kishore

Please check your allocation structure , it looks that settlement cost element that you have assigned in the allocation strcuture is not having correct cost element category.
regards
Ranjan

Error while Settlement to AUC from Project CJ88

Hi,
ECC 6.00/PSM-BCS
While settling the Project to AUC I am getting the below error. Please advice.
*Asset DAML 000009000004 0000: no subnumber with FM assignment CAPEX / /*
Message no. AW851
Diagnosis
During settlement of sender WBS DAMEPL 1.1.1.1 there was an attempt to settle a posting that has account assignment CAPEX / / (fund/functional area/grant) to an asset subnumber. However, the receiving asset DAML 000009000004 0000 does not have an asset subnumber with this assignment.
System Response
The posting on this sender cannot be settled to an asset subnumber.
Procedure
Either create an asset subnumber with account assignment CAPEX / / for asset DAML 000009000004 0000, or settle to a different receiver.
If this message appears as a warning only, then the posting from this sender is settled to the asset main number.
Fund Capex : CAPEX
Company Code : DAML
WBS Element : DAMEPL 1.1.1.1
Best Regards
Shekhar
Edited by: Chandrashekher Yellapragada on Jun 5, 2010 7:00 PM

I am facing the same error and find this OSS Note 440396 - Missing entries for configurable messages in IS-PS-FM where you can deactivate the error message.
Hope this will solve your issue too.
Regards,
OSS Note 440396
Symptom
System issues messages AW851,AW852,AW856 or AW857 as Error even though
functionality exists to make these configurable.
Other terms
LAIMBFM1, OBA5, AW, AW851, AW852, AW856, AW857
Reason and Prerequisites
Missing entries in tables.
Solution
Create Application Area for Customizable messages for 'AW' using transcation SM30 with view V_T100SA.
Next using transaction SM34, enter view cluster VC_T100S, click maintain and select Application Area AW and double click Messages. Add the following entries:
AppArea     No. Allowed Values     Std     Switch off
AW     851    EWI     E          X
AW     852    EWI     E          X
AW     856    EWI     E          X
AW     857    EWI     E          X
Afterwards with Transaction OBA5 insert the entries for the messages you want to customize, and set them to the error level the behaviour should be for your particular case.

Error while settling Internal Order to CWIP asset using T-cdoe KO88

Hi experts,
While settling the amount from Internal Order to particular CWIP asset, i am getting the following error
"Define a number range for settlement documents"
Kindly provide me the solutions how to go about it.
Thanks in advance
Bashyam

Hi,
Go to T.Code KANK
Click on "Maintain Groups" (F6)
Assign a suitable number range to object KOAO
Regards,
Kenneth

Error while settling costs to AUC (T.CODE CJ88)

The following error is encountered while settling costs to AUC using
t.code CJ88 with WBS element,
with parameters
with orders
Selection processing type 3 (partial settlement),
period 4,
FY 2008,
selection - with hierarchy, with orders.
Error message is:-
Typ Message text
LTxt
Sender: WBS ASCP.DSCA.CP.NS.DS.003 PLANNO MILLING 4MX2M
Acquisition value negative in area 01.

Hi,
Use T.Code: as02 and click on Depreciation areas, then double click on Depreciation area(example :01 - book dep), there u can select the field allow negative postings allowed. Once this process is completed, remove that indicator.
If u couldn't found that field, then goto screen layout for depreciation area and change status from suprress to optional.
Hope it can resolve ur problem
regards
Prasad

Error while settlement of WBS - Funds Management

Hi,
We have maintain derivation rule as - WBS to Fund Center. This Fund center is DUMMY because we need not want to control WBS through Funds Management.
There is always one Cost center in each WBS. while settling this WBS we are getting error as -
Asset ABC 000127000000 0000: no subnumber with FM assignment DUMMY / /
Message no. AW851
ABC - Company code
000127000000 - asset number
DUMMY - Fund center
suggest.

alex ice wrote:
Hi, 1 change FC in AS02 to dummy if it applicable.
> 2 Check note 618269 it applicable.
> 3 remove FC from asset master data
Hi Alex, how are u!?
I've got the same issue than Harsh Vaidya in my system ...
Ive already read this notes: [618269|https://service.sap.com/sap/support/notes/618269] (no apply to me, because Joint Venture Accounting isn't active), [844262|https://service.sap.com/sap/support/notes/844262], [1473357|https://service.sap.com/sap/support/notes/1473357], [446029|https://service.sap.com/sap/support/notes/446029] and [440396|https://service.sap.com/sap/support/notes/440396]
All very interesting notes :P
But... I couldn't find the solution
I try to TRACE from FMDERIVE too, but when I go to KO88, FMDERIVE's trace doesn't track anything.
Any help to throw some more light on this thread, would be very useful.
Thanks a lot!
Regards from Argentine.

Error while settlement of Internal order

Dear All
I am getting the following error while executing KO88 "Choose transaction type and base value appropriate for asset values".
The settlement and posting period are 12 and the processing type is "Partial Capitalization".
Pls advice
Rgds
Nitika

hi.....
check you settlemnt rule for internal order. forsure you will find mismatch between settlemnt rule and actual settlemnt. check in settlement rule the % to be settled.
Regards
Manish Jain
Pls assign points if your problem get solved.

Settle AUC costs to Asset Master Record

Hi,
Can any body tell me where the error has occured when i am settling AUC costs in Project to asset master record via the transaction AIBU.
   The exact error message is:-
BALANCE IN TRANSACTION CURRENCY
Message no. F5702
Diagnosis:-
The balance has occured in transaction currency " ZAR"with the following details:-
Exchange rate '00' amount '2000' and currency key 'ZAR'.
The data in transaction currency was transfered from the calling application.
System Response:-
Your data cannot be processed in FI.
Procedure:-
The error is probably in the calling application.
   Thanx in advance.
Regards
Santosh
Message was edited by:
        Santosh Singh

Hi,
In my view its because of the difference of amount between two currency is not been settled. Most of the company maintained same using T-Code S_BCE_68000174 on-line or manual. Please check the updating happening properly or not.
Enjoy SAP.
Dont forget to give points if its useful ans.
Namskar,
Ketan Dave

Need to settlem partial amount on AUC to final asset

Dear SAP Experts,
I would like to seek guidance on how we can allow partial settlement to final asset.
For example, we have an ongoing project/WBS that has been settled to AUC, for example 1000 EUR (i.e. as of end of period 1)
Our controlling area currency is USD and the project/WBS is set for Summary settlement only.
NOw, we want to settle 2000 EUR to a final asset in period 1 but retain the rest in AUC to be settled on a different final asset that is yet to be determined.
Here is the current setting of our settlement profile:
To be settled in fule - active
Indicators:
100% validation - active
% Settlement - active
Equivalence Numbers - active
Amount Settlement- Active
Appreciate any input you can provide
Thanks
Aristotle

HI,
1. System needs validity periods for manually entered distribution rules & you have from & to periods to specify. They need not be identical. You can specify a validity period which starts in April & ends in June, for example.
2. Combining the first & last lines of your latest post,
--You can execute Settlement multiple times within a period as long as you keep on posting costs after each settlement.
-- What is the minimum period for you to settle ideally (daily / weekly) ?
-- As SAP (also Business Processes in general) distinguishes between periods (months), you can do one time settlement each month to simplify & standardize your process. It has got the same effect even if you settle daily / weekly.
(FI & MM period closing are monthly, as you know).
-- If you want to do another settlement for the same asset in the same period & only the "%" changes, then you may create another distribution rule or you can comibine the "%" in one rule itself.
regards

Quantity field updation from MIGO to AUC to final asset.

Hi All
can anybody help me understand how the quantiy field is updated from MIGO having Internal Order which than settled to AUC form their to final asset.So that final asset has updated quantiy automatically.
Urgent help highly appriciated.
Thanks

hi
If you go to trx. ME23N with the PO number, please select the item and
double click. There you will see that field 'GR Non-valuated'.
When this field is marked, it implies that asset won't be affected by
the Goods receipt. Asset will be updated only when the invoice receipt
is posted. ie MIRO
Also, please refer to the following note for further information:-
44944 Quantity update in fixed asset with asset posting
In AS01/AS02, you will need to enter the unit of measure.
Best regards,
Blaz

Abap -Error while doing with F-90(asset aquisation)

Hi all
when iam simulate the transaction while using F-90 for asset aquisation, the following error was occured. Plz help me out from this problem very urgent .
Its purely ABAP Problem.
Error in the ABAP Application Program
The current ABAP program "CL_FAA_DC_SEGMENTS_SERVICES===CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
error analysis
You attempted to access an unassigned field symbol
(data segment 32773).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
How To Correct The Error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"CL_FAA_DC_SEGMENTS_SERVICES===CP" or "CL_FAA_DC_SEGMENTS_SERVICES===CM009"
"CREATE_TIMESEG_FROM_ITEMS"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Information on where terminated
Termination occurred in the ABAP program "CL_FAA_DC_SEGMENTS_SERVICES===CP" -
in "CREATE_TIMESEG_FROM_ITEMS".
The main program was "SAPMF05A ".
In the source code you have the termination point in line 29
of the (Include) program "CL_FAA_DC_SEGMENTS_SERVICES===CM009".
Regards,
Krishna

Hi Krishna,
sounds strange...
Do you have assets with daily depreciation??
Pls. check OSS-notes 1135934, 1112997,
My favourite is note 992846, has the asset only one area and is assigned to a group asset?
Hopefully this is a usefull hint...
Best regards
   Horst

Getting error while Year end closing in asset accounting for the year ...

Hi,
i am getting error while doing Year end closing in asset accounting for the year 2004. It is giving few assets and saying that "Depreciation not posted completely"
Can any body help in this reagards.
With regards,

Dear Shree,
Do u have the list of all such assets for which no depreciation has been posted. If yes, then go to AFAB, upload the list all these assets & then select the radio button as 'repeat'.
This will post you depreciation for all the assets. then close the year.
regards,
Ajay

Error while uploading BITMAP image in SAP through SE78.

Hello all,
I am getting below error while uploading image into SAP through SE78.
'Bitmap file: No color table available (True Color, Bitcount 32)'.
I have tried searching for solution and got some help from below reply from a thread:
You may do these options:
1. Lower the resolution of the image
2. Lower the file size of the image
Regards,
Reymar
I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
Thanks in Advance.
- Jayant Sahu.

Hi Daniel,
First of all, if you dont mind, start a new thread for your question please.
Anyways, answer to your question is --
You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
This way, your problem would be resolved.
Thanks.
Kumar Saurav.

Getting error while submitting data to excel workbook through excel services in InfoPath 2010

Hi,
I have a requirement where in have to fetch the calculated values from the excel workbook through InfoPath 2010 form.
When I am submitting cell value to excel workbook using SetCellA1 by executing following action:
"Submit using data connection: dataconnection"
I am unable to submit form. It is giving "there has been an error while processing the form" in the front end. I checked the event viewer and it displayed following exception:
There was a form postback error. (User: xxxx, Form Name: yyyyyyyy, IP: , Request:
http://asadadsas Request Form Template.xsn&SaveLocation=/somelocation, Form ID: urn:schemas-microsoft-com:office:infopath:formname:-myXSD-2010-09-20T15-02-34, Type: KeyNotFoundException, Exception Message: The given key was
not present in the dictionary.)
I was successfully able to submit the form using InfoPath client but it is giving error in the browser.
Is there any way or configuration that I should do to resolve this issue.
Any suggesttion would be of great help.
Thanks,
Sharepoint Consultant from NY, USA

I have exactly the same problem. The form is supposed to be submitted to the SOAP Web service (http://servername/_vti_bin/ExcelService.asmx) using the SetCellA1 operation, works fine in InfoPath Filler, but when I try to submit it in the browser, I get this
error:
There was a form postback error. (User: WINGTIP\Administrator, Form Name: NewEventForms, IP: , Request: http://intranet.wingtip.com/et/_layouts/FormServer.aspx?XsnLocation=http://intranet.wingtip.com/et/NewEventForms/Forms/template.xsn&SaveLocation=http://intranet.wingtip.com/et/NewEventForms&Source=http://intranet.wingtip.com/et/NewEventForms/Forms/AllItems.aspx&DefaultItemOpen=1,
Form ID: urn:schemas-microsoft-com:office:infopath:NewEventForms:-myXSD-2011-12-29T18-18-45, Type: KeyNotFoundException, Exception Message: The given key was not present in the dictionary.)
followed by
Unhandled exception when rendering form on postback System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at Microsoft.Office.InfoPath.Server.SolutionLifetime.DatabaseHelper.GetSchemaXml(String namespaceUri, Solution solution, String dataObjectName, SchemaNavigator& schema, XPathNavigator& originalSchema, XmlNamespaceManager& namespaceManager)
at Microsoft.Office.InfoPath.Server.SolutionLifetime.PartFragmentHelper.IsDataSetNode(Solution solution, XPathNavigator node)
at Microsoft.Office.InfoPath.Server.SolutionLifetime.PartFragmentHelper.ApplyPartFragmentGather(DataAdapter adapter, XPathNavigator sourceDOM, DataObjects dataObjects, XPathNavigator targetDOM, PartFragment[] partFragments, Boolean[]& areDataSets)
at Microsoft.Office.InfoPath.Server.SolutionLifetime.DataAdapterWebServiceSubmit.Execute(Document document, Uri soapAction, Uri serviceUrl, XPathNavigator querySubDOM, XPathNavigator resultsSubDOM, XPathNavigator errorsSubDOM, Int64 timeout, DataAdapterCredentials
credentials, Boolean useDcl, Boolean useProxy, Boolean useSelf)
at Microsoft.Office.InfoPath.Server.DocumentLifetime.DataAdapterWebServiceSubmit.ExecuteInternal(XPathNavigator queryFields, XPathNavigator resultFields, XPathNavigator errors)
at Microsoft.Office.InfoPath.Server.SolutionLifetime.RuleAction.EvaluateExpression(Document document, XPathNavigator currentTarget)
at Microsoft.Office.InfoPath.Server.SolutionLifetime.RulesRuleSet.EvaluateExpression(Document document, XPathNavigator targetNavigator)
at Microsoft.Office.InfoPath.Server.DocumentLifetime.Document.ExecuteDefaultSubmitAction()
at Microsoft.Office.InfoPath.Server.SolutionLifetime.ButtonSubmit.Click(Document document, XPathNavigator container)
at Microsoft.Office.InfoPath.Server.DocumentLifetime.EventClick.Play(Document document, BindingServices bindingServices, EventLogProcessor eventLogProcessor)
at Microsoft.Office.InfoPath.Server.DocumentLifetime.EventLogProcessor.ExecuteLog(Int32 expectedEventLogID)
at Microsoft.Office.InfoPath.Server.DocumentLifetime.Document.<>c__DisplayClass13.<PlayEventLog>b__11()
at Microsoft.Office.Server.Diagnostics.FirstChanceHandler.ExceptionFilter(Boolean fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock, FinallyBlock finallyBlock)
What might be wrong? Are there any InfoPath configurations that need to be done? And, do I need to save the connection to the Excel Service Service Application to a connection file?
Thanks,
Boris

GLT2201 error while settling AuC to Final Asset through KO88

Similar Messages

Maybe you are looking for