Glue 4.1.2 and weblogic7.0.4 problem
Hi all,
I am having a problem to start my war that uses glue 4.1.2 on
weblogic7.0.4. Glue.jar is contained inside of our war.
Below is the error message I saw at start up. It says
the server is in RUNNING mode, but wsdl files cannot be loaded from
the explorer.
<Oct 7, 2003 11:53:06 AM PDT> <Notice> <WebLogicServer> <000327>
<Starting WebLogic Admin Server "mcserver" for domain "mc">
<Oct 7, 2003 11:53:37 AM PDT> <Error> <Management> <141006>
<Application mc:Name=DefaultWebApp,Type=Application not found at
[STARTUP] GLUE Professional 4.1.2 (c) 2001-2003 The Mind Electric
[ERROR] null unable to locate file system/application.xml
[ERROR] null unable to locate file system/console.xml
[ERROR] null unable to locate file system/jndi.xml
<Oct 7, 2003 12:08:51 PM PDT> <Notice> <WebLogicServer> <000360>
<Server started in RUNNING mode>
However the same application runs perfectly on weblogic 8.1.
Anybody has the same experience, any comments are highly
appreciated!!!
Thanks.
The adobe flash player version is 10.1.583,its an update version.By the way,we take an advice to install back the Mozilla,First it didnt work to Safari it web videos,So we keep shut down for few hours.Viola!!!!!!its working both browser,Safari work to play any web video as well as Mozilla.But we are confusing if we UNINSTALL the Mozilla and it will came back the same behavior of Safari that didn't work any web watch medias coz we need enough to keep one browser and that's Safari.What shall we do?Thanks a lot.
Message was edited by: DAMADUET
Similar Messages
-
my aluminum screen cover has come loose ,it seems as if the glue holding the cover and the screen has come loose how can i fix it
its the 2009 15" macbook pro its not under warranty anymore im hoping to be able to fix it myself but im not to sure how
-
DV6-3122us/ after and during Factory restore problems
This is a DV6-3122us 64 bit notebook, 500GB hard drive, 4 GB ram, Windows 7 Home Premium OS. I restored it from the Factory purchased recovery discs, and I had a problem with that, had to do it 3 times kept locking up at 9% on the restore part. It finally went through then said couldn't install, turned it off, and it was installed. This is Windows 7 Home Premium. Now I have lock ups when updating. The HP assistant loads but says it has errors at the very top, and doesn't show the system information at the bottom. The hard drive only shows 80 GB allocated, and 397 unallocated. This is all the original hardware, which has been tested and has passed, memory has passed. Any Help would be greatly appreciated.
1. Right click on the partition ( C:\ ) you want to Extend into the now unallocated partition and click on Extend Volume.
2. Click on Next for the Welcome to the Extend Volume Wizard window
3. Select the amount of space in MB you want to use from the unallocated partition to use to Extend this partition
4. Select all of the available space .
5. Click on Next.
6. Click on Finish in the Completing Extend window
You will now see the Disk Management console with the new extended partition volume ready to be used.
7. Close Computer Management.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud. When I restored my phone from icloud, half of my pics and videos have been deleted, the pics that were restored on my phone are very blurry, and the videos won't play. I get a message on my phone that says " the URL you are requesting is not found on this server". I have erased and reset my phone twice, but every time I do it, more pics and videos are deleted. I have backed up to icloud and iphoto, however, some of the pics are no longer on iphoto either. Is there someway to get the videos to play on my phone again? Make the photos not as blurry as they are now and to restore the pics and videos that have been lost? I really would love to have them back, this phone is supposed to be the best and right now it doesn't seem to be. Please help if you can.
I too have noticed that once i restored from iCloud. Pictures blurry and videos wont play!
Need help too!! -
I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit") -
I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?
fighter19lisa wrote:
that only makes it say its synced, when its not.
No, it does not. It transfers purchases from the iDevice to the computer. The computer must be authorized for the Apple ID that the content was acquired with.
fighter19lisa wrote:
my playlists wont show up on the phone.
Are they selected to sync? Is Manually Manage content on the device selected?
fighter19lisa wrote:
i had to change my password for my aol account again and i still cannot get my email on my phone to even work
What does that have to do with syncing content to the device? FYI, nothing. -
Hi! My My mom bought me an iPhone 5 and I have a problem with my facetime. I cant find it! Cant find it in settings and restrictions. I remember when she gave me this I see facetime in settings and after a couple of days its gone! She bought this in Bahrain both my iPhone and her iPad Mini. And I'm just wondering why she has facetime and why mine is missing? Please help! My iMessage is perfectly working. I lived in the Philippines
Are you trying to use the phone in Bahrain with a supported carrier there? I suspect not. If you try to use this phone outside of Bahrain, you won't have FaceTime. This is done to prevent folks from simply crossing the border to purchase iPhones in Bahrain...FaceTime is banned in Saudi Arabia & the UAE. Sorry, but you'll only have FaceTime on that phone while using it in Bahrain on a supported carrier's network there.
-
My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?
I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon. -
I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make .. I Don't know what to DO Please anyone help me i've got OS 5.0.1 and it's factory unlocked i've boughted from USA and it was sent to me where 'am living now in Egypt ...ANy Helpppppppppp Pleasee
try general>settings>reset>reset all settings and start up as an new phone.
-
I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respondGenieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller! -
Office Report Generation Toolkit 1.0.1 and MS Office 2000 problem
Hello.
I'm tring to make a repot in word using a template..everything works just fine when in development..but when i make the executable the problem arises.
I get error code 7 (Cannot open vi reference) in NewReport.vi.. FYI i'm running the aplication in the same machine i'm developing.
I'm sure everything else is ok..- changed paths to work in executable, template in correct folder...i'm adding the necesary support llb to the executable(Win200), etc - ..i tried reinstaling office and the report generation toolkit but i still have the same problem...
How can i solve this?....
Thanks in advance for all yur help.Well..that was a very good answer to my question...and it solved my problem. Thank you.
I thought that by adding just the llb as support files would be enogh..but now i see this is not correct..thanks again. -
Sending a bug report on the OS and a sleep mode problem.
I find the bug button in Safari really convenient for sending Apple bug reports. And when other applications crash, you usually get an error dialog with a button to send a bug report. But sometimes problems arise that require reporting, but which don't fall in either of these categories. It would be very handy to have a bug "button" for the OS, or perhaps just a menu selection in the Finder menu bar that invokes a bug report dialog box. I know you can dig around and find the URL for Apple's bug report web page, but I am always forgetting it -- I suppose I could just bookmark it, but then I'd just have to dig around in all the bookmarks to find it. Better would be a utility built-in to the OS for sending bug reports (like Safari's). It could also automatically transfer necessary info about the OS rev and such.
The problem I had was this. I have a script that puts my iMac to sleep. I put the script alias on the task bar and a single click puts the computer to sleep (easier than using the menu). Unfortunately, I sometimes click it by mistake when I am trying to click an adjacent icon in the task bar, and the Mac starts going through its cycle to enter sleep mode and is impervious to anything I do to try and cancel it. I tried pressing the space bar continuously to prevent it from going to sleep, but that did not work. Worse, when it went to sleep and I woke it up again, the task bar would not appear, clicking on app windows did not activate them, Finder menus could not be selected, etc. The cursor would move, but I could not do anything else. (I wish now I had noted if the clock in the menu bar was still advancing, but I didn't think to do that.) I powered down the iMac from the power key and rebooted. Things are working fine now.
I wanted to send a bug report on this, but realized that unlike Safari, there was no button or menu selection for doing that. So here I am.
Any suggestions are welcome.
TIA,
Drake[email protected]
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I purchased 2 packages of gems for skylanders and only received 1 package. Got email receipts and tried to report problem with link in email on my ipad2 and it keeps coming up with to many https redirects. Can anyone help? Just want my gems :).
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Dropbox, mail, and other apps having problems after 10.8.2 upgrade
Here are a few of the symptons that I have experienced-
Dropbox came up with a relink request and said the folder had been moved
Mail shuts down suddenly
Chrom shuts down suddenly and when I re open, the restore banner shows and then disappears
within Chrom, the recently closed tabs in HISTORY does not show the tabs that were up when the mysterious shutdowns occur.
comments please!Have you tried starting in Safe Mode and see if the problems still occur?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.) -
I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.
jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
SAP Connector Factory - performance tuning in VA
Is anyone aware of SAP guidance or notes on how to tune the SAP connector SAPFactory properties, especially where a Portal makes RFC calls across multiple ABAP-based backends? For example SAP Note 1021921 shows this property is important when closin
-
Hi, I'm missing a few PO's in BW which are present in R/3. Since I have limited knowledge of the MM side, what are the reasons that could cause a PO to be excluded. The PO also exists in table EKPO. We are using datasource 2LIS_02_ITM. We do a full l
-
ACS 5.2 Authentication Issue with Local & Global ADs
Hi I am facing authentication issue with ACS 5.2. Below is AAA flow (EAP-TLS), - Wireless Users >> Cisco WLC >> ADs <-- everything OK - Wireless Users >> Cisco WLC >> ACS 5.2 >> ADs <-- problem Last time I tested with ACS, it worked but didn't do mig
-
Hello people! i need some helping in designing a solution, i'm kinda new in the PI world, and i never made BPM stuff and so... Here is my situation, i have 2 Webservices that i have to consume in PI R/3 will send information to PI
-
Can't "hairpin" with RV180 Small Biz Router - how to achieve?
We have 2 servers in our LAN set up via One-to-One NAT to accept WAN calls to 2 static IP addresses. This works fine. What we cannot do is: access various calendar and web forms on these 2 servers from within our LAN (thought they work fine outside