GM-Midi Logic Pro 9 and Rolan Piano

Hello
I tried to read MIDI-Files with my Roland KR-15M Piano with the error 15
This song or music style cannot be read. Please use a Roland SMF Music Files or Roland Digital Piano compatible music files (p. 201). Also, you can only use User Programs that have been saved with the KR
Following file-types are accepted:
GM-MIDI
GM-MIDI 2
GS Format
XG Lite
So what I think is, there's a issue within the MIDI-file-strucure created with Logic Pro 9.
How can I generate or what I have to do, to generate Roland compatible GM-MIDI files?
Thanks a lot for your assistance and support.
best regards
Walter

Hi
Presumably, the problem showed up after you installed drivers for the external kit?
Temporarily remove the MIDI drivers from:
Library:Audio:MIDI Drivers
and (maybe... do the above first)
System:LIbrary:Extensions
Do a full restart after removing each one. Assuming Logic works, add them back one at a time.
You will not need to buy MainStage again. In the Appstore, select the Purchases button to re-download.
CCT

Similar Messages

Which MIDI keyboards work with Logic Pro x and Yosimite?

can anyone suggest some midi keyboards that work with Logic Pro x and yosimite

Hi Jacub,
I have a 2i4 running Mavericks 10.9.2 on a Mac Book Pro, and my unit works properly, please make sure your run the unit with the class compliant mode app (click the link below):
http://us.focusrite.com/downloads?product=iTrack+Solo
Please contact Focusrite support if you have any more concerns.
Best Regards,

Soundflower, Logic Pro X and Ustream

I broadcast a show on Ustream in which I play the saxophone against trax that I have
loaded into iTunes. I play the sax into an apogee USB mic. I also use that same mic
to talk to the audience while trax are playing, at which time I need to adjust the level of the track
and the mic. I’m working on a Mac Pro with Logic Pro X.
Up until now, here’s what I’ve been doing.
In Mac Audio Midi Setup:
I set the output device in Audio Midi Setup to Soundflower (2ch).
I set the input device in Audio Midi Setup to Mic.
In Logic Pro X:
In preferences I set the input device to Mic, and the output to
to Soundflower (2ch)
In Ustream:
I set the input to Soundflower (2ch)
For monitoring:
I set the Soundflowerbed desktop app to route from Soundflower to Built-in Output which I then
listen to on my headphones as I do the show.
This works, in a fashion, but is extremely awkward, in that the only way to lower the music track levels when I want to speak on the mic is by lowering the slider on iTunes.
Here’s what I want to do, but can’t yet figure out, despite many attempts:
I want to route both the iTunes and the mic into Logic Pro X.
I want to be able to mix both the mic and the trax in Logic Pro X and then
output it into Ustream for broadcast.
I also want to be able to monitor the mix though my headphones.
I’ve tried creating aggregate devices and multi-output devices but can’t seem to get what i want.
The permutations I’ve tried and the problems are too numerous and varied to list here.
But I’d appreciate any ideas on how to accomplish running a system + mic input into logic,
mixing in there, and then piping the combined trax out through Ustream.
Thanks.
david

serisony,
Make sure your router allows or has multicast enabled... as this is required..
and..
Check if you have a firewall operating either on your Mac or in your Router... (On the Mac this also includes apps like Little Snitch... and not just the OS X firewall itself.)

Logic Pro 9 and Apogee Duet

I recently upgraded to Logic Pro 9 and for some reason I am unable to record an Audio track via my sE2200a mic and Apogee Duet. I was able to do so before the upgrade. I cannot be definate that the problem occurred immediately after the upgrade, because I was not doing any audio recording for a while (I was using using loops and midi recording).
I went thru the setup manual for the Apogee Duet but the screens do not match the screen shots in the manual anymore and so I am not sure the Apogee Duet is set up properly to work with Logic Pro 9. When I sing into the mic, I see the recording levels on the Apogee Duet move so the mic seems to be working, but I cannot get any audio into Logic pro. I would appreciate it if either someone could point me in the direction of an updated manual for the Apogee Duet and/or Logic Pro that details how the Audio setup should be done, or any other ideas to stop me from pulling my hair out!
I am pretty new to Apple, Logic Pro and the Apogee Duet, so be gentle!:-)
Thank you.

Hi Ervin,
In order to be able to record the audio, you must "record enable" the audio track. There is a small button on the track labeled "R" (beside the mute and solo buttons). When you click it, it turns red, thus indicating the audio track is armed and ready to record.
Also, make sure your audio track is set to the correct input. I have my mic plugged into XLR input 2 on my Duet, so I must select "Input 2" on the audio track in Logic.
See if that works for you.

M-Audio Fast Track USB interface not compatible with Logic Pro X and Yosemite

Hello All!
I've been trying to simply record some guitar and vocal tracks onto the latest version of Logic Pro X. It worked before I downloaded the update of Yosemite, however now, I can't find a solution to my problem. I've tried everything! Installed new drivers onto the M-Audio and even tried to search for a later update of Yosemite. I have read a few things online about how Yosemite doesn't accept 3rd party drivers. So any USB plugged in to the macbook/mac that isn't mac based it doesn't accept.
Please can someone help me solve his issue!
Thankyou!
Felix

I know many, many of us who are running things just fine.
I have to be really honest with you Ben and say... Where are you getting that idea from because it simply isn't so.....
I have a quite large client list of Logic users from all over the world... and of those that have attempted to use Logic Pro X and Yosemite together... over 80% have had to revert back to a previous configuration because of performance and/or stability related issues...
I personally, have on test here at the studios... 7 different Macs ranging from 2010 Mac Mini i7 Servers to 2011 32GB 3.4Ghz iMacs.. to a maxed out 2013 i7 MBP to a top of the line 2014 Mac Pro and all have demonstrated issues regarding performance and stability with LPX and 10.10.x using a variety of different Audio/Midi interfaces, all of which have supposedly 10.10 compatible drivers... and all of which have no such issues running LPX under Mavericks...
Just a quick scan across the various forums.. indicates that very few people are successfully running LPX under Yosemite without performance problems.... so that's why I am asking where you are seeing 'many many people" because I am just not seeing that myself...
Cheers..
Nigel

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

Well, how have to determined no signal is being recieved to your mac?
Have you got something that shows the actual signal? Or have you just been trying to control a VST? What software are you using by the way?
I personnally went with a AKAI MPK25, because it's made already mapped for logic & ableton etc, so it just makes things incredibly easy.
I would suggest you return it if you can as a dead unit & perhaps look at something else a bit easier?
Otherwise, if you just want to get this working we can have a look a bit deeper.
And driver? OS X driver?

I have just purchased Logic Pro X and it doesn't seem to want to work with my Tascam us-122L sound card. Do i need to purchase a new one and if so, any advice on a reasonable priced one?

I have just purchased Logic Pro X and it doesn't seem to want to work with my Tascam us-122L sound card. Do i need to purchase a new one and if so, any advice on a reasonable priced one?

What OS do you have? Have you tried the latest drivers?
http://tascam.com/product/us-122l/downloads/
alternatives: Focusrite Scarlett 2i2, Presonus Audiobox.

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion. Use the program Pacifist to install it.

Download Logic Pro 9 and Mainstage.

I want to buy Logic Pro 9 and Mainstage. Can I download a pc connected via moden and install content on my MacBook Pro?

I guess you won't be able to do that, because you should use the AppStore to buy and download the software.
What's the problem with your MacBook Pro? Does it's AirPort work? If it does, just find a WiFi network fast enough to be able to download a few Gb of data (e.g. friend's house). You can even try a local coffee shop, if you don't plan to download all the additional content

I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

Yea I am. I deleted Logic Pro 9 and moved the App to the Trashcan like normal. Then when I go to install it, it says its already Installed. When I do this with other apps; it works fine, the install thing comes back up like it should once you have deleted the app

After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet

after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga.

What's the best Mac to run Logic Pro 9 and above with no issues

What's the best Mac to run Logic Pro 9 and above with no issues?

Any Mac that can happily run OS X Snow Leopard 10.6.8 and Logic Pro 9.1.5.....
Note: Newer Macs cannot run Snow Leopard because SL doesn't provide hardware support for the newer hardware found in these newer Macs....
Next best combo for newer Macs is Mavericks 10.9.5 and Logic Pro 9.1.8... but it is nowhere near as efficient a combo as the previous one mentioned...

Can you run Logic Pro 8 and Logic Pro X on the same machine?

Hello all!
Congratulations to us on the release of the new Logic Pro!
I am still running Logic Pro 8 (and was waiting for X to come out since I knew it wasn't too far off) but am concerned over the loss of 32-bit plug-ins with Logic Pro X (the wrapping of my old VST plug-ins alone hurts!). I've heard that installing Logic Pro X doesn't in any way gimp Logic Pro 9's usage, but can someone confirm whether or not Logic Pro X and Logic Pro 8 can operate in harmony on the same Mac?
As a bonus, is there any reason to believe that Apple would disable earlier versions of Logic Pro (such as version 8) from running on Mavericks?
I am planning my Logic Pro and Mac OS migrations! Thanks!!

Try here:
https://discussions.apple.com/community/professional_applications/logic_pro
This forum is FCP X.
Al

I just bought and installed logic pro x. and after instal it is asking for synapse audio DUNE registration.. where do I get that?

I just bought and installed logic pro x. and after instal it is asking for synapse audio DUNE registration.. where do I get that?

http://www.synapse-audio.com/

I lost my Logic Pro box and disc, I can't find my serial number. What should I do?

I lost my Logic Pro box and disc, after it upgraded to 9.1.4, it asked me about serial number, but I lost it...
I can't find my serial number. What should I do? (I baught it last year.)

Hey Rickstertw,
I think there are two ways to do this. Open Logic Pro, then in the menu tab, click on Logic Pro in the upper left hand corner, then choose About Logic Pro. Another window will come up, and you should be able to see the serial number just below your name under "Licensed to" - that is, presuming this is a licensed to you copy! :-)
If for some reason it doesn't come up there and you registered the product with Apple, then call the support number and if you can verify your information with them, they should be able to give it to you.
Regards
Joyce

GM-Midi Logic Pro 9 and Rolan Piano

Similar Messages

Maybe you are looking for