GMAIL and 10.8 (how to manage, and delete)

So, I happily (?) configured my brand new iMac 10.8 to my gmail account ----- and theb some 40,000 past gmail emails filled my mail box.
Ugg
I guess I don't know too much about gmail or mail.
SO: Q: I would wish that when I DELETE an email on my iMac Mail (gmail account) program, it also deletes it from our friends at the Gmail Server farm (or, better yet, have it deleted there some 30 days later, in case I change my mind).
Been to Gmail site, can't fiture that out.
Ideas?

Well, perhaps I am not synchronized
What happened was that when I knew I was going to change MACs, I deleted MOST of my gmail emails from the prev. computer, and then saved the MAIL folder and put on a separate Hdrive to use later.
(I haven't done anything with that archived mail folder YET, but wish to merge or add it to the new mac).
Anyway, when I set up new Mac i set up the gmail email account (it had an easy walk-thought step by step) .....and the 30,000 emails downloaded. Including those I deleted a few days earlier.
J

Similar Messages

How to manage and prevent database lock for database admin and development

how to manage and prevent database lock for database admin and development
[email protected]

Hi,
can someone advise me some good book or even better a PDF or a white paper on the Web where it's explained well how to design and manage a relational database (that is normal forms, tuning, design, implemantation...)?
I've been working on Oracle databases for a few years as pl sql programmer, but I'd like to read something describing well the relational database theory, because I've been asked to work as database designer.There are many books available in the market, please go through this link -- http://www.amazon.com/gp/bestsellers/books/549646/ref=pd_ts_b_nav
I've been told to read "Fundamentals of Database Systems" by Ramez Elmasri, but I ask here for some more advices.I would strongly recommend reading this book, it was my best reference during my college study and even after starting my DBA career.
Thanks,
Hussein

After a one week logout and shutdown my macpro 1,1 laptop shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?

After a one week logout and shutdown my macpro 1,1 laptop running OSx 10.6.8 shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?

Startup – Black screen with cursor
Startup Issues - Resolve
Startup Issues - Resolve (2)

How to manage and edit albums in iOS iPhoto?

I'm unclear how to manage albums: adding or removing photos to or from an album, creating and renaming them?

i have iPAD mini. I have installed facebook there.
i have uploaded 23 photos from iPAD to facebook and all stored in iOS album, which is default album name.
now later, from my laptop i have renamed iOS album in to 'sonmething'. Now after that, when i try to upload photos from iPAD to facebook, default album shows 'something'.
is there any options for creating new album? or is there any chance to upload a new iOS album?

One Premise with dom and ndom connnection how to implemant and do billing.

Hi Experts,
One Premise with one dom con and one ndom connnection how to implemant.How to manage billing.
As per my knowledge we can set contract category on CA level and contract level .I think it is 1,2,3.We 1 for normal account.And 3 for joint invoicing.If i am wrong plz tell me.
Moderator note - thread locked - can be found at help.sap.com
Edited by: William Eastman on Jun 1, 2010 8:41 PM

Hi Marc
I solved the problem
Actually the oRootElement.toString was returning me only the string and not the
XML formatted String eg:
<?xml version="1.0" encoding="UTF-8"?>
<response id="2"><apartment id="1"/><clips><clip><id>1</id><timeStamp>2000000</timeStamp><size>100</size></clip><clip><id>2</id><timeStamp>4000000</timeStamp><size>200</size></clip></clips></response>
So the very first tag was missing <?xml version="1.0" encoding="UTF-8"?> when i used element.toString();
But now i used StreamResult and Transformer
which gives me the same XMl format as i want and it works fine with both
JRE1.4 and JRE1.5
Thank you
Geetanjalee

How to backup and restore postgres, How to backup and restore postgres

Hi!
Yesterday I had a major hickup while trying to configure some OD stuff. Since I was still setting up Lion Server, I just decided to go back and restore the system using a Time Machine backup from a few hours earlier. Went well... except that anything to do with postgres was not working anymore: web pages, wiki, iCal, etc Postgres would not start anymore. I could not find anything on the internet and after a few hours of trying gave up and just did a fresh, clean install. Fortunately there were not many user files on yet, but I did lose everything I noted in the wiki since I migrated the old Snow Leopard content.
SO, HERE comes the question: is there a fool-proof way of backing up all Lion Server postgres databases and, more importantly, to actually get the thing back up after a Time Machine restore? I know I can dump all db's using pg_dumpall, but what would be the steps to get this back up and running should I need to? I have restored many MySQL databases in the past, but never were they directly linked to many OS functionalities.
The "Advanced Administration" document of course is not advanced enough for this. Is there anywhere I real guide on "How to restore and make function your Lion Server after a major desaster", like hard disk failure?? Would be very helpful, in case it's needed but also for peace of mind.
Thanks lot! Appreciate any input!
Cheers,
Hendrik

Take my little script here and adjust it to your requirements. I got the base of this script somwhere else and enhanced it myself. Read some explanations below:
# #!/bin/bash
if (test "`whoami`" != "root") then
        echo "You need to be root to start this"
        exit 1
fi
PG_PORT="5432"
PG_USER="_postgres"
PG_BIN="/usr/bin/"
ACT_DATE=$(date '+%y-%m-%d')
EXP_DATE=$(date -v -2w '+%y-%m-%d')
BACKUP_DIR="/Backups/postgres"
LOGFILE=$BACKUP_DIR"/_pg_backup.log"
COMPRESSION="9"
PG_CON="-U $PG_USER"
BACKUP_OPTIONS="$PG_CON -b -C -F c -Z $COMPRESSION"
VACUUM_OPTIONS="$PG_CON -eq"
echo "***** DB_BACKUP $ACT_DATE *****" >>$LOGFILE
for db in `$PG_BIN/psql $PG_CON -lt | sed /\eof/p | grep -v = | awk {'print $1'}`
do
    # vacuum
    if [ "X" == "X$db" ]; then
          continue;
    fi
    echo $(date '+%c')" -- vacuuming database $db" >> $LOGFILE
    if $PG_BIN/vacuumdb $VACUUM_OPTIONS $db
      then
      #echo "OK!" >>$LOGFILE
          sleep 1
    else
      echo "No Vacuum in database $db!" >>$LOGFILE
    fi
    # backup
    echo $(date '+%c')" -- backing up database $db" >>$LOGFILE
    if $PG_BIN/pg_dump $BACKUP_OPTIONS -f $BACKUP_DIR/$db-$ACT_DATE.pgdump $db
      then
      if [ -e $BACKUP_DIR/$db-$EXP_DATE.pgdump ]; then
          echo $(date '+%c')" -- deleting old backup" >>$LOGFILE
          rm $BACKUP_DIR/$db-$EXP_DATE.pgdump
      fi
    else
      echo "FAIL Database $db backup!" >>$LOGFILE
    fi
done
This script dumps all databases in postgres individually.
Databases are vacuumed and then dumped.
Dump-Format is currently set as compressed pgsql dump (See "-F c" in $BACKUP_OPTIONS)
File names consist of "databasename"-"backupdade".pgdump
I have programmed to automatically purge backups older than two weeks (see " -2w " in $EXP_DATE)
If you drop a database you will have to remove backups for that database manually.
I have enabled a daily run of this scrip by placing the executable script somwhere and add it to the crontab of root: sudo crontab -e
Enter the following line and your backups start every day at 6:00. Adjust paths and scriptname according to your own setup.
0 6 * * *       ~/.bin/postgres_dump.sh > /dev/null 2>&1

Hi, I'm gringo to download Apps that Hades already bought, and also new ones but get stuck on a "waiting" signal forever and that I can't manage to delete.

Hi, I'm trying to download apps some new, other that I had erased, but get stuck on the wheel and a sign that says waiting and nothing happens. Can't even erase the sign. What can I do?

If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
How to Solve the Problem of An iPad App Download Stuck on “Waiting”
http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
How To Get Rid Of Your iPad App Download Frozen Problem
http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
Another thing to try - Turn the iPad Off & then back ON.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
 Cheers, Tom

Installation and Connection Error with Desktop Manager and Curve 3G

I just installed Desktop Manager 6.01 and then tried connecting my Curve 3G to the system using the accompanying USB cable.. But there was a connection error.. so i did a bit searching on the net and went to (http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB00125) which gave me a solution to install m\y driver.. But when i try to manually install my driver, it shows an error "THE SERVICE CANNOT BE STARTED, EITHER BECAUSE IT IS DISABLED OR IT HAS NO ENABLED DEVICES ASSOCIATED WITH IT" now the USB is working because my phone is being recognised by the laptop and moreover in the device manager od my Vista, Blackberry is being shown... I cn see in drivers that Drivers have been installed but the drive Information such as Version, date is not available and the driver is unsigned...
Can someone tell me what exactly might the problem?? any reply will be appreciated..

I encountered the same issue, Not sure if you'll have the same results, but all i did was enable windows updates, and did an automatic driver update from the web (as in from windows updates) and after a reboot, all was back to normal.
hope that helps,

I have a fourth gen iPod Shuffle and I cannot find anywhere how to manage and view songs on the ipod, in iTunes 11 there is no intuitive way to view the songs at all. I guess Jobs thought, "why would anyone want to do that..lets make it impossible"

I have an ipod shuffle...4th gen.
I use iTunes 11. When ipod is
connected is shows but there is
no intuitive way to view and manage
songs on the product.
under the icon is only RECENTLY PLAYED and RECENTLY ADDED.
Click on the icon and then select music up top of the app does NOT
show you what is in the ipod but what is stored in itunes.
I am now thinking this was a Steve Jobs joke he played on customers.
Does anyone know a definative way to view and manage songs or
a third party app that permits it.?

I hav the same problem. When I "Control" click on the small triangle to the left, I do not get an option to pick Music.

Accents and special characters - how to manage

Hi,
please could you explain how it is possible to handle accents and other special characters in Business Objects XI 3.1 (Universes and Reports)? Which are the parameters/settings I need to configure for
Database (ORACLE)
Application Server (AIX)
Universe
WebI
I want to display italian accents ò à è ù ì and some special characters like '@'. Even if they are correctly stored in DB, in WebI I retrieve characters without accent and a '?' for '@'
Any suggest?
Then, one more thing ...I noticed that creating a new report WebI, characters with accents appear without accents, instead if I create a report with Rich Client and I publish it, then accents are correctly displayed also opening the report with Web Intelligence. I have the application server on AIX, but Rich Client runs on WIN Server ...
Thanks a lot
Edited by: Tube Girl on Mar 22, 2010 4:25 PM

Hi,
I had almost the same problem (only different language) and manged to solve it after "google-ing" these links:
http://www.forumtopics.com/busobj/viewtopic.php?p=658760&sid=7fd77de133ee32213d987cb1550ae568
https://oraclespin.wordpress.com/2008/05/01/setting-nls_lang-for-oracle/
http://docs.oracle.com/html/B13804_02/gblsupp.htm
FYI, system is AIX 5.3 with Oracle 10g.
I've edited .profile for boxi user and added appropriate export of NLS_LANG variable, then restarted BO and now reports are correct.
I guess you should try adding this line to .profile of your boxi user
export NLS_LANG=ITALIAN_ITALY.WE8MSWIN1252
then restart and see results.
Hope this helps,
regards!

I have greyed out songs in my itunes that say they're on my phone but aren't and no matter how many times I delete them they manage to show up again.

How do I get rid of these songs for good?

Are you following these instructions:
To delete photos from your device
In iTunes, select the device icon in the Devices list on the left. Click the Photos tab in the resulting window.
Choose "Sync photos from."
On a Mac, choose iPhoto or Aperture from the pop-up menu.
On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
Choose "Selected albums" and deselect the albums or collections you want to delete.
Click Apply.
From:
iOS and iPod: Syncing photos using iTunes

I was not aware of the automatic renewal of subscriptions and was chareged on 4/27 for another year of The Daily. How do I cancel the suscription and get reinbursed? I have recently found how to manage and shut off future renewals. Can i get a refund?

I was not aware of the automatic renewal of subscriptions and was charged on 4/27 for another year of The Daily. How do I cancel the suscription and get reinbursed? I have now shut off automtatic renewals. It would have been nice to know it was there to begin with!

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

Ipod 5th generation video and G2 Shuffle - how to manage both?

I have about 30 gigs of music on my itunes, and somebody gave me an old shuffle. I want to sync it with certain songs for my son but I want the big ipod to continue to do a complete sync. I nuked the existing music on the shuffle, made a playlist, and not seeing an option to sync with a specific set of tunes, I dragged the playlist and dropped in onto the shuffle's name. Now the music is there, but how do I get it to sync automatically if I update that playlist?
What is Autofill?
Did I do this the best way or is there a better way?

You have to set it to sync playlists.
Go to the music tab and select what you want to sync.
You can look up the manual:
http://support.apple.com/manuals/#ipod

How to manage and remove iPhoto collections in iPhone when syncing

I'm trying to free up storage space in my iPhone 4S. I have the latest iOS version7.0.4 and my iMac is on Maverick. In iTunes before syncing i went to the Photos tab and requested to only sync the last 3 months with no videos to appear on the 4S. However I noticed that after syncing past Collections from over the years are still on my iPhone and still taking up storage space. Any suggestions out there having to not have those older Collections sync and appear? Thanks.

Method 3: Use AD psdrive with the cmdlet New-PSDrive -PSProvider ActiveDirectory
If we use the cmdlet with credential to get the permission to execute the operation as Method one, we always need to input the admin’s password, which is annoying, so you can try this method.
After we run the cmdlet “import-module activedirectory” on DC, we can use the cmdlet “Get-PSDrive”, and we will find that the “AD” with the provider “ActiveDirectory” will be listed in the result.
These PSDrives can help you access different resources in a uniform way, we can use these PSDrives to make working across multiple domains easier.
Example3: Add and Remove the user in domain 2 to the group in domain 1
Figure 3: Add and Remove the user in domain 2 to the group in domain 1
The script in the screenshot listed as below:
1) Create the new AD psdrive of domain1 in domain2:
Import-Module activedirectory New-PSDrive -Name test -PSProvider ActiveDirectory -root
"" -server test.server.com -Credential TEST\Administrator
2) Use the new AD psdrive:
Set-Location test:
$u = Get-ADUser test11 –Server bichso.test.server.com
$g = Get-ADGroup newtest1
Add-ADGroupMember $g –Members $u
Get-ADGroup newtest1 –Properties * | select members
Remove-ADGroupMember $g –Members $u
Get-ADGroup newtest1 –Properties * | select members
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

How to manage and classify iwork files?

Maybe you can help me.
I use a lot of written docs, iWork docs. I am looking for a way to store and classify them. Something like an iTunes for docs, where I can move around, give them tags, different lists etc. At the moment I just have them in different files in the finder, by years etc, but it is not enough. Thank you very much for your trouble.

This is part of your solution:
In +Inspector > Document > Info+ you can add *Author, Title Keyword and Comment*. This presumably can be searched for in Spotlight, allowing you to gather up like material into a series of nested folders.
You can use Finder's Coverflow feature to thumb through these folders and preview them as you go without opening them.
Also you can use the color Labels in Finder to add further classification to your files.
Use *View Options* in Finder to reveal the Label and Comments and you can sort by these features.
If you want a much beefed up Finder to reveal and control much more of your documents, look at PathFinder which is a Finder substitute, or Yep! which is an iPhoto like app to organise .pdfs of your documents.

GMAIL and 10.8 (how to manage, and delete)

Similar Messages

Maybe you are looking for