Gmail imap *very* slow in WiFi/EDGE

I have two IMAP accounts on my iPhone: one for my school account, one for my gmail account. When I check for new mail in my school account, it takes 1-2 seconds. Checking for new mail in the gmail account sometimes takes 30 - 60 seconds. However, when I check mail right after that happens, it's done in 1-2 seconds.
It happens on both WiFi and EDGE.
Any thoughts?
Peter

That happened once to me and I got rid of that by going to setting - airplane mode -ON, wait 30 seconds, turn it off and retry... it will reset both your wifi and edge connections

Similar Messages

  • Lumia 920 Facebook connection very slow over WiFi ...

    Since the Portico update the connection to Facebook both in the People and Me hub as well as in the Facebook app is very slow over WiFi, whilst still good over 4G/LTE (with WiFi off). The connection to the Nokia account also appears to have a similar problem. All other accounts and apps have good speed over both cellular and WiFi connections.
    Any ideas anybody?
    PS: FYI, a bit more info about the history and context: When I noticed the problem the first time after the update, I tried to solve it by deleting and re-adding my Facebook account on the phone. Unfortunately, that made me lose my Me hub tile, so I decided to do a full reset. That again unfortunately got stuck on the togg wheels, so I restored the phone using Nokia Care Suite with the latest firmware, and restored my accounts, apps and settings from scratch. Everythings seems to work fine now, except the above mentioned Facebook and Nokia account connectivity problem.

    Did you somehow solve this problem?
    I have the same issue here with my Lumia 920.
    However I have already found out that it only applies to my home Wifi. All other Wifi networks i was connecting to did work flawlesly.
    I need to note that all other devices on my home network are using facebook without a glitch. Only Lumia has some problems with it.

  • Very slow internet (Wifi) on my mac mini late 2012

    Hey, I have recently experienced very slow internet (Wifi) on my mac mini late 2012. On other mac's and computers the internet is working well. I cannot change the channel of the router (what I found out to be the only solution here), because I live in dormitory. Should I try to restore OS? What would be other possibilities? Is it OS or mac mini issue?

    If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.

  • Very slow/stalling wifi connection on iMac

    I recently purchased the iMac 21.5" Core i3 3.06GHz- I was quite exited about my new computer as I've been thinking about switching to Mac for a couple of months. I was amazed with the software compared to Windows, but so far I'm very dissapointed with the wifi connection.
    I connect to a router which is two floors down in the same apartment building (we have an agreement to share the connection with my neighbors)- D-link router using WEP- authentication. On the same spot where I placed my iMac, I regularly get 2-3 out of 5 bars and speeds of approx. 250 kb/s with my corporate Windows7 lenovo PC. However, the iMac wifi connection is very slow- I'm not sure of the exact speed, as the connection is very unstable- sometimes webpages load quickly, but sometimes a simple web-page takes forever. The key issue is downloading files- when downloading a file, the speed starts at 250- 300 kb/s at first, then quickly drops to approx. 50 kb/s, a then usually stalls and the download is rarely finished.
    I have tried browsing apple support for help, and found advice to adjust MTU in AirPort settings, and I experimented with various DNS, but niether of these seems to help, my web-browsing and page loading times seem to have improved, but downloading files is still almost impossible. The problem si very frustrating, since I get reliable speed and connection on my lenovo PC on the very same spot as the iMac.
    Based on reading internet discussions on this topic this seems to be a rather wide-spread problem with the iMac, and I'm wondering if anyone here has a similar experience and any suggestions for a solution? Can it be an issue with the aluminium body which has poorer reception, and I simply need to move my desk to different location in the apartment?
    Thanks, I appreciate all suggestions!

    Hello,
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
    The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
    10.5.x/10.6.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    The interface that connects to the Internet should be dragged to the top of the list.
    Then highlight the Ethernet, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
    208.67.222.222
    208.67.220.220

  • Very slow Ethernet & WIFI transfer speeds -  MC340X/A

    Hi.
    I recently purchased an Airport Extreme model no. MC340X/A being used as an isolated standalone network with 3 gigabit ethernet clients and a couple of n WIFI clients, and no other base station or Hub/Switch in the network.
    One of the problems I have is that I'm experiencing very slow network transfers between both ethernet clients and wifi clients of any combination. The maximum transfer rate I can achieve between ethernet to ethernet, WIFI to WIFI, or WIFI to ethernet clients connected to the MC340X/A is 2.5 MBytes / second, on both 2.4 and 5gig bands using n capable WIFI cards and gigabit ethernet cards.
    I have performed a hard reset of the device with no improvement.
    The firmware is version 7.5 and it appears there is no older firmware to revert back to for this model.
    I have an older Airport Extreme n Gigabit model which achieves 7 to 12 MBytes / Second transfers over WIFI and at least 20MBytes / Second over ethernet to ethernet using the same clients, in exactly the same location etc.
    Do I have a faulty unit and does it need to be returned? It is only 2 days old and want to sort it out within my 7 day return policy.
    Thanks for any help.
    Cheers
    Cat

    Sorry folks, I seem to have worked it out.
    I found on another thread that saving the setup info as a profile and re-loading the saved profile has helped some people. This appears to have cured the slow transfers for me so far.

  • IPhone 5s is very slow without wifi

    I Just got a brand new iPhone 5s with a four gigabyte plan. I share it with one other user. Well even since the first day I got it if I leave out the house my iphone is very slow. It only works fast with wifi one. I don't have many apps on it. I don't have any song on it yet. I tries reseting network. I tried hard reset. Yes I do have LTE 4G.
    Is this a Verizon issue. I did notice that I only have two bars or circles at the top where I'm at right now. Maybe it's where I am? I'm not sure help. 

    I forgot to add it takes like 30 seconds to load one web page. Also apps like Instagram, kik, YouTube is very slow too.

  • Firefox 5 if installed, gmail becomes very slow. Why?

    I was installed fire fox 5. But my G mail was running very slow. Also browsing speed was slower down. so again i installed the previous version of fire fox. Why fire fox 5 is not running with Google search engine?

    Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works fine in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker.

  • Iphone very slow on wifi, computers are fast.

    My internet at home has a download speed of 4megs, but my iphone 4 only connects at .5 or slower. Both my imac and windows laptop connect to the same wifi and have no issues. Also, I believe this is a fairly new problem.
    Thanks for any help.

    I second this... everything was working fine on my home wifi. I had a iphone 4 and a 3g running without issue. Then I upgraded my wife's 3g to a 4 and now the wifi is slower than cellular data. for a while i couldn't even get on my wifi, after manually setting the wifi settings i was able but alot of apps just hang.
    thoughts anyone?

  • Hardwired via 5505 is very slow. WiFi is fast.

    Hello from Ecuador,
    We have a very small office with no more than 10/15 users at a time.  Our ISP provided speed is 7down and 3up.
    We have deployed an ASA5505 in our network, and our very simple topology looks like:
    Cable Modem > ASA5505 ------- AP1262 (via PoE port on ASA)
                                     |
                                     |
                         Plug and Play D-Link 24port Switch 
    When users connect to the AP, they are getting the normal browsing speeds as mentioned above.
    However, all the hardwired users' download speed is less than 1mb (their upload is normal).
    (Note that when we deploy the old Linksys router back in-place of the ASA, everything seems back to normal.  Its only with the ASA we are experiencing this).
    Below is the very simple config from the ASA. 
    Any advice/guidance is highly appreciated on how to resolve the speeds for our hardwire users.
    ASA Version 8.4(2)
    hostname WCS-Ecuador
    enable password 6klE4j2hhSXaLMNg encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    interface Ethernet0/0
    description LINK TO ISP
    switchport access vlan 100
    duplex full
    speed 100
    interface Ethernet0/1
    duplex full
    speed 100
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    nameif INSIDE
    security-level 100
    ip address 192.168.0.1 255.255.255.0
    interface Vlan100
    nameif OUTSIDE
    security-level 0
    ip address <removed for security>
    ftp mode passive
    object network Ecuador-INSIDE
    subnet 192.168.0.0 255.255.255.0
    pager lines 24
    mtu INSIDE 1500
    mtu OUTSIDE 1500
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    object network Ecuador-INSIDE
    nat (INSIDE,OUTSIDE) dynamic interface
    route OUTSIDE 0.0.0.0 0.0.0.0 <removed for security> 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    aaa authentication ssh console LOCAL
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
    telnet timeout 5
    ssh 192.168.0.0 255.255.255.0 INSIDE
    ssh timeout 5
    ssh version 2
    console timeout 0
    dhcpd dns <removed for security>
    dhcpd address 192.168.0.21-192.168.0.200 INSIDE
    dhcpd enable INSIDE
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    username tabbasi password eUopM1EefaUVVnUY encrypted privilege 15
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect ip-options
      inspect netbios
      inspect rsh
      inspect rtsp
      inspect skinny
      inspect esmtp
      inspect sqlnet
      inspect sunrpc
      inspect tftp
      inspect sip
      inspect xdmcp
      inspect icmp
      inspect icmp error
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    call-home
    profile CiscoTAC-1
      no active
      destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
      destination address email [email protected]
      destination transport-method http
      subscribe-to-alert-group diagnostic
      subscribe-to-alert-group environment
      subscribe-to-alert-group inventory periodic monthly
      subscribe-to-alert-group configuration periodic monthly
      subscribe-to-alert-group telemetry periodic daily
    Cryptochecksum:aaa6e39ee2f83e97d59c038614a6e7d2
    : end

    Hi,
    Do you see any errors on ASA Eth0/1(to switch)?  Running the similar speed tests with wired and wifi? Client traffic on network is same as well?
    Thx
    MS

  • My internet does not work or its VERY slow ( same WIFI)

    Hello,
    Last days i cant do anything on internet on my iPhone 5S. My internet does not work  or it is too slow to use it..
    Problems are on: Wifi, 3G, 4G
    My FUP isnt reduced from operator, because I didnt get any notification ( always receive) and my WIFI does not work too.
    I still have warranty. There are few pictures... I will "title them"
    Thank you for your answers.
    Test on my iPad MINI - Test that WIFI works.
    Test on my iPhohe 5S - 3G internet
    Test on my iPhohe 5S - 4G internet (test was made on 4G but then i turned WIFI ON).
    Test on my iPhohe 5S - WIFI (after TEST i turned WIFI OFF)

    Run straight to your local Apple service center to have it repaired before more damage occurs.

  • Incoming Gmail is Very Slow

    I'm having an unusual problem with gmail. I am NOT a gmail user, I host my own mail on an Xserve running Snow Leopard Server. The problem is that when other gmail users email me, it takes 30-60 minutes for that mail to arrive on my server, in my inbox. From what I can tell, all other mail services arrive instantly. But for a couple of months now, Gmail has had this unusual delay.
    I'm using 10.6's built in mail server, with nothing particularly special. I am using four realtime blacklists, but they're pretty mainstream lists, and I haven't made any changes to them lately:
    cbl.abuseat.org
    sbl.spamhaus.org
    xbl.spamhaus.org
    bl.spamcop.net
    I'm not really sure where to even begin, troubleshooting a problem like this.

    Check your mail server logs, and see if there's anything relevent being logged there when the messages are in-bound. 
    Also check that your MX record is what you expect, and that its forward and reverse translations match. 
    To check that, launch Terminal.app from Applications > Utilities and enter the following diagnostic commands.  (Stuff that can and will vary for your specific setup is shown in italics, stuff in the commands that doesn't vary uses plain text.)
    dig @8.8.8.8 MX +short example.com
    mail.example.net
    That asks Google DNS server at IP address 8.8.8.8 to show your MX record for your mail server, and the output shown assumes that your public mail server name is mail.example.net host.
    Now get the IP address...
    dig @8.8.8.8 +short mail.example.net
    10.20.30.40
    That's your public IP address for your mail server.
    Now get the name associated with the IP address that the previous dig command returned...
    dig @8.8.8.8 +short 10.20.30.40
    mail.example.net
    Use the IP address that was returned by the previous dig command.    If you don't get back your domain name for your MX server, then your public DNS is misconfigured.
    I'm also assuming you have just one NIC connected on that Xserve system.  If you have more than one NIC connected, there can be or are extra steps, and you'll need to have IP routing correct.

  • Very Slow Speed & WIFI lagging?

    Hi all, I am a Broadband customer with 8meg max download speed, over the last 3 months I have gone from over 8meg to now 223kb download speed, I have spoken to about 4 diffrent people at BT who go through the same things over and over again!!!
    My issue is that BT have just installed FTB which is only 50yrds away and since they started messing around in that box my speed has dropped completely and not happy, they say I have an issue with my internal wiring but BT put a separate new line in only 6months ago with a strting download speed of 11meg and our Hub 2 is connected straight to it with just my pc and printer connected to the Hub, all other gadgets are connected through wifi and in some cases with two or more devices connected it bombs out altogether.
    Is it me or is this all a ploy just to get me to sign up to Infinity in which I could receive speeds up to 100meg?. I was think of upgrading before all this hassle but now just feel as thou I may be forced to?  any help would be appreciated.......... BT are yet to get back to me on my latest report of this issue.

    Welcome to this customer to customer forum.
    To enable forum members to help you, could you please read the web page that is shown below, which asks you to do a few checks first, and has some helpful hints.
    When you have done that, please follow the instructions at the end, and post the results here, so members can offer advice. Thank you.
    Speed and disconnections
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • My ipad on the new ios7 is working very slow wifi

    my ipad on the new ios7 is working very slow on wifi and so is my iphone 5 any suggestions?

    A solution has been found thanks to a couple of hours on the net and logical analysis.
    It seems my email provider BT has changed their mail client to Outlook 365. They have started my migration, hence I cannot send mail from home wifi, and will complete after a few days.
    If anyone reading this in the UK and has the same issue then follow this link for setup of the new system.
    http://btbusiness.custhelp.com/app/answers/detail/a_id/18751/c/2048/

  • Safari and Gmail very slow

    This may be a sign of Google releasing that BUZZ thing, but I have noticed gmail to very slow with Safari. Getting a lot of "still working" messages. I have BUZZ turned off. But I am assuming that BUZZ might be dragging their network down with high traffic.
    Of course, I have reset safari, etc..
    Message was edited by: powerbook1701

    HI,
    Gmail and Safari issues
    According to Google, "Gmail users with Safari version 4.0.4 might encounter issues loading Gmail and other issues". This link has more info: http://mail.google.com/support/bin/static.py?page=known_issues.cs
    Also, try Safari maintenance..
    From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
    From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
    Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem.
    http://support.apple.com/kb/TS1594
    Web pages now include a small icon or 'favicon' which is visible in the address bar and next to bookmarks. These icons take up disk space and slow Safari down. It is possible to erase the icons from your computer and start fresh. **To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/ and move this file "webpageIcons.db to the Trash.*
    Repair disk permissions..
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Make sure the there's enough free disk space. Not enough will slow the drive down. Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 10% to 15% free disk space at all times.*
    Carolyn

  • MBA - slow internet/wifi then photo stream is enabled

    I have problem with very slow internet /wifi connection when photo stream is enabled. I run some test. I'm conecting MBA to internet by WIFI network. When photo stream is enabled, ping reply time to my router is around 1000ms - 2000ms. When I turn off photo stream, ping reply time is around 1ms, and internet works fast. I've tested MBA with difrent access point and there is the same problem. I have 2.5GB of photos on iCloud.
    What can I do to fix this?

    Photo Stream uses a lot of bandwidth. The fix is to disable it.

Maybe you are looking for

  • Cin details service tax number - urgent

    Hi, In vendor master i am able to see CIN details for PAN TAN Excise and other numbers but i am not able to see service tax registration number. every time if it needs to be updated i have to go to J1ID and update. Is there any setting through which

  • Data output more than once

    Hello Experts I'am facing a peculiar problem pertaining to Infoset query ( Tran SQ01,SQ02, SQ03) . The requirement is to create a query based on table GLPCA and CATSDB. I've created the query as required, However when i execute the same the output is

  • IDoc (Outbound & Inbound) PO to ECC (2 clients)

    Hi As part of testing I need to send outbound idocs from 2 separate clients in ECC to PO Also I need to send inbound idocs to 2 separate clients of ECC from PO With one client everything is working fine. What extra steps need to be done for 2 clients

  • Error in Accessing WebService

    Hi All,           I am creating a model in developer studio using Import WebService-DEPRECATED option. Since I don't have user name and password for the URL.(Not Required). Its throwing error when generating proxy. the URL is http://www.abysal.com/so

  • Unplanned depreciation error

    Hi When i try to post unplanned depreciation for the transaction type 640 system is showing the following error Posting with trans.type 640 not possible (No acquisition posted) Message no. AA324 Diagnosis Transaction type 640 belongs to a transaction