Gmail retrieval stopped after quitting MobileMe

I have been using Apple Mail for 7 years; I'm fairly familiar, but not expert, with the application. For the past 2 years or so, I've been forwarding all work, personal, etc. mail accounts to Gmail, then retrieving them with Apple Mail. It's worked well thus far.
Yesterday, I canceled a trial MobileMe account I had set up a couple months ago. I had also set up a MobileMe account in my Apple Mail, though I only used it to send mail, not receive. After quitting the MobileMe account, my Gmail account stopped retrieving mail. I figured out how to get it to send (I had been using MobileMe for outgoing mail), but it will not retrieve... the spinning wheel just keeps on spinning. My iPhone still retrieves mail from Gmail, but not Apple Mail on my Mac.
Connection Doctor says the connection is good. Any ideas on how I can resolve this problem? I have experimented at length, without success.
Thanks,
Nick

Hi Erine,
Yes, I am running 10.5.4. I need to update my profile on these message boards. My stats below are the most current. Anyway, I am using port 25, and the SMTP address is smtp.me.com. I did not set this part up manually; when I added my MobileMe account, I chose the "Add Account" button from the Preferences->Accounts window, typed in my name, e-mail address, and password, and Mail did the rest for me. Is it possible that the Mail app used the wrong SMTP information? Perhaps someone here who is using MobileMe with Mail app can confirm that the server should be "smtp.me.com" on port 25 with SSL enabled.
EDIT: As I am going into the Activity Window, the outgoing MobileMe just started working! E-mails are sending! Hooray!
Now on to the bigger problem...why, when I click Get Mail, does nothing happen?! Why isn't Mail app checking for mail every five minutes, as I have set up? And why does Mail app freeze when I try to quit?! Again, thanks for the help!

Similar Messages

Why QT Server error (stopping) after quiting CS5?

Everytime I stop CS5...I get a "QT Server error" where it stops "unexpectantly". Anyone know why? I just upgraded from CS4 to CS5 64 bit and WINDOWS 7 64 bit.

QT is an odd beast. I am not sure what the underlying issue is, but Apple loves to update QT and make it incompatible with Adobe programs. This has gone on for a very long time. Apple will issue a good version, and then a couple that just will not work with anything Adobe. The most recent version (7.6.6 I think), seems to be a bit of a mixed bag. It works for many but not for all. Versions 7.6.3 and 7.6.4 seemed to be death to anything Adobe. For me, the "last known good" version is 7.5.5, but that will not provide full MOV support in CS5. Before that, 7.3.5 was the last known good, and all 7.4.x versions seemed to not work at all with Adobe products. I keep older versions around, never update iTunes AND QT, and will ONLY do a manual download and install, choosing Custom in ALL cases.
Glad that things are working well and good luck,
Hunt

Execution stops after retrieving the factory from the ServletContext while

Hi,
I just started working with Quartz, so I am clueless as to why I am getting this error. This is my first time tying to integrate Quartz 1.6.0 in a web app. I am using the JSF Framework. Although I have added the necessary jars I am still getting the error above: servlet.jar not loaded. If you follow the java code and server output you can see that after retrieving the factory from the ServletContext there is no further execution . Following is the definition of the class used for scheduling:
Quartz Version: 1.6.0
IDE : Netbeans 5.0
AppServer: Tomcat 5.5
*************************************** JAVA CODE *************************************
* BirthdayScheduler.java
* Created on May 20, 2008, 5:24 PM
package com.csg.cs.cscomwebdev.servlet.timer;
import java.io.*;
import java.net.*;
import java.util.Date;
import javax.servlet.*;
import javax.servlet.http.*;
import org.quartz.JobDetail;
import org.quartz.SchedulerException;
import org.quartz.SimpleTrigger;
import org.quartz.impl.StdSchedulerFactory;
import org.quartz.Scheduler;
* @author Arijit Datta
* @version
public class BirthdayScheduler extends HttpServlet {
/** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
* @param request servlet request
* @param response servlet response
protected void processRequest(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=UTF-8");
PrintWriter out = response.getWriter();
out.close();
/** Handles the HTTP <code>GET</code> method.
* @param request servlet request
* @param response servlet response
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Handles the HTTP <code>POST</code> method.
* @param request servlet request
* @param response servlet response
protected void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Returns a short description of the servlet.
public String getServletInfo() {
return "Short description";
public void init()
System.out.println(" ------------ STARTTING JOB --------------");
// Retrieve the ServletContext
ServletContext theApplicationsServletContext = this.getServletContext();
// Retrieve the factory from the ServletContext
StdSchedulerFactory factory =(StdSchedulerFactory)theApplicationsServletContext.getAttribute("QuartzFactory Servlet.QUARTZ_FACTORY_KEY");
System.out.println(" ------------ FACTORY GOT --------------");
try {
// Retrieve the scheduler from the factory
Scheduler scheduler = factory.getScheduler();
System.out.println(" ------------ SCHEDULER GOT --------------");
// Start the scheduler
scheduler.start();
System.out.println(" ------------ SCHEDULER STARTED --------------");
//Creating a job
JobDetail birthdayJobDetail = new JobDetail("birthdayReminderJob", scheduler.DEFAULT_GROUP, BirthdayReminderJob.class );
System.out.println(" ------------ JOB CREATED --------------");
//Creating a trigger
SimpleTrigger birthdayJobtrigger = new SimpleTrigger("birthdayReminderTrigger",scheduler.DEFAULT_GROUP, new Date(),null,SimpleTrigger.REPEAT_INDEFINITELY, 60L * 1000L);
System.out.println(" ------------ TRIGGER CREATED --------------");
//Scheduling the job
scheduler.scheduleJob(birthdayJobDetail,birthdayJobtrigger );
System.out.println(" ------------ JOB SCHEDULED --------------");
} catch (SchedulerException ex) {
System.out.println(ex.getMessage());
} ************************************* SECTION OF WEB.XML ************************
<servlet>
<description>Quartz Initializer Servlet</description>
<servlet-name>QuartzInitializer</servlet-name>
<servlet-class>org.quartz.ee.servlet.QuartzInitializerServlet</servlet -class>
<init-param>
<param-name>shutdown-on-unload</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>start-scheduler-on-load</param-name>
<param-value>true</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>BirthdayScheduler</servlet-name>
<servlet-class>com.csg.cs.cscomwebdev.servlet.timer.BirthdayScheduler< /servlet-class>
<load-on-startup>1</load-on-startup>
</servlet> *********************************** SERVER OUTPUT *******************************
Using CATALINA_BASE: C:\Documents and Settings\165171\.netbeans\5.0\jakarta-tomcat-5.5.9_base
Using CATALINA_HOME: D:\Program Files\netbeans-5.0\enterprise2\jakarta-tomcat-5.5.9
Using CATALINA_TMPDIR: C:\Documents and Settings\165171\.netbeans\5.0\jakarta-tomcat-5.5.9_base\temp
Using JAVA_HOME: C:\Program Files\Java\jdk1.5.0_02
May 20, 2008 7:27:13 PM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8084
May 20, 2008 7:27:13 PM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 766 ms
May 20, 2008 7:27:13 PM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
May 20, 2008 7:27:13 PM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.9
May 20, 2008 7:27:13 PM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
May 20, 2008 7:27:14 PM org.apache.catalina.loader.WebappClassLoader validateJarFile
INFO: validateJarFile(D:\Java Programs\cs\CSCOMWEBDEV\build\web\WEB-INF\lib\servlet.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
log4j:WARN No appenders could be found for logger (org.apache.catalina.session.ManagerBase).
log4j:WARN Please initialize the log4j system properly.
------------ STARTTING JOB --------------
------------ FACTORY GOT --------------
May 20, 2008 7:27:15 PM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8084
May 20, 2008 7:27:15 PM org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
May 20, 2008 7:27:15 PM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/32 config=null
May 20, 2008 7:27:15 PM org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
May 20, 2008 7:27:16 PM org.apache.catalina.startup.Catalina start
INFO: Server startup in 2802 ms Can anybody please help out? Where exactly am I going wrong?
Thanks a lot!
AD

Your stop condition is "continue if true". This means that, unless you press the button, the while loop will stop after one iteration.
First, you should change the termination condition to "stop if true".
Then you should make the stop button "latch when released" (right-click..mechanical action). Else you don't have a well defined state after the program stops.
You should decide on a reasonable loop rate and enter it for the wait control. (beter use a diagram constant if the value is always the same).
Why do you need to continue reading in a loop? Are you expecting the response to change over time?
Do you want to keep appending to the string indicator or only show the latest characters received?
Maybe you also need a wait between the writing and reading?
Delete the ms timer value indicator, it is completely useless.
Do you get any error codes?
Don't use the run continous button. Use the plain run button.
What device are you communicating with? Do you have documentation?
LabVIEW Champion . Do more with less code and in less time .

Stop Safari from resetting preferences after quitting

After installing Macafee, Safari will keep settings after quitting. I have uninstalled Macafee by using their uninstaller and the problem persists. The default apple homepage opening on Safari startup and is getting very old. Any ideas on how to stop this from happening?

Try deleting the password for that site...
Quit Safari. Now open Keychain Access. (Applications/Utilities). Select Passwords on the left.
Delete the keychain for that site.
Relaunch Safari. Navigate to the site. Enter your user name and password as usual. When prompted to save that data, click Never.

Mail keeps relaunching itself after quit.

I have this issue with Apple Mail. It launches itself fairly quickly after I log in (no, it is NOT set to do that, Open at Login is not checked) and if I quit the app, it almost immediately relaunches itself again, and again, and again. It is, as expected, independent of the "check mail" setting, and does this even when that is set to Manual. Which I would expect, as I have never seen the check mail option launch the app.
Anyone have a clue as to what this might be? If I did not know better, I would think that someone put a 1 second cron job in to launch mail as a joke (does not appear to the case), but that is how it acts, relaunches right after quitting.
Running 10.5.6 on a new Macbook, 2 GB memoy
Any suggesitons on where to look would really be appreciated.
-Owen-

Well, of course, I have been chasing this for months, and JUST today, I decide to post the question here, and just today, I discovered the answer myself. Painstakingly I removed programs one at a time and re-logged in.
I discovered that when I removed the Soonr backup software "Soonr Desktop Agent" the problem went away. This agent scans your computer for things that need to be backed up, it has an option to also backup mail and address book data as well. Seems they feel they need to launch mail to do that, and that they need to launch it all the time for some reason. When I turned off the agent, the problem went away.
Turning the agent back on, I unchecked the "Enable retrieval of content from Mail and Address Book" and mail stopped launching itself immediately but backup seems to run, but perhaps not backing up mail now. Oh well.
I will report that as a bug to Soonr, but strange that it feels it needs to launch Mail to get data but not the address book.
Sorry all, problem solved by myself. Left here for reference.

Question: How do I retrieve values after creating an autofilter.

So the question is sort of simple but my code is below, this is my first time really running in VBA but it isn't so far all to dissimilar to LotusScript which I am a bit more knowledgeable in. What I am trying to do is retrieve values from the filtered information,
or more simply, I am trying to retrieve values from two cells in the spreadsheet that I want move together.
As noted below one of them is a countries field which simply concatenates the country string with the duplicates with the same first column (A#) fields.
Example 123 .. UK
              123 .. US
              123 .. CA
The output stored in countries would be UK,US,CA and posted to sheet3.
Sub proFirst()
Dim wSheet As Worksheet
Dim columnCount As Integer
Dim rowCount As Long
Dim testVar As Long
Dim coll As New Collection, a
Dim Assignee() As String
Dim tmpList() As String
Dim newVar As Variant
Dim dict As Object
Const rowDataBegin = 2
Dim count As Long
rowCount = Sheets("Sheet1").UsedRange.Rows.count
columnCount = Sheets("Sheet1").UsedRange.Columns.count
'** This Cleans up the filtering to ensure all data is viewable before we begin **
Sheets("Sheet1").Activate
If (ActiveSheet.AutoFilterMode And ActiveSheet.FilterMode) Or ActiveSheet.FilterMode Then
ActiveSheet.ShowAllData
End If
Sheets("Sheet3").Activate
If (ActiveSheet.AutoFilterMode And ActiveSheet.FilterMode) Or ActiveSheet.FilterMode Then
ActiveSheet.ShowAllData
End If
'** This sets a filter to filter by column O which is designated as Submitted Date **
Sheets("Sheet1").Columns("A:S").AutoFilter Field:=15, Criteria1:="<>"
'** This block copuies and pastes the values we need for the final report however   **
'** this is not a permenent viewable format for the report, a recut may be required **
Application.CutCopyMode = False
rowCount = Sheets("Sheet1").UsedRange.Rows.count
Sheets("Sheet1").Range("A1:D" & rowCount).Copy Sheets("Sheet3").Range("A1:D" & rowCount)
Application.CutCopyMode = False
Sheets("Sheet1").Range("J1:J" & rowCount).Copy Sheets("Sheet3").Range("H1:H" & rowCount)
Application.CutCopyMode = False
Sheets("Sheet1").Range("O1:O" & rowCount).Copy Sheets("Sheet3").Range("I1:I" & rowCount)
Application.CutCopyMode = False
'loops through the first column and acquires all of the data and generates as string array
rowCount = Sheets("Sheet3").UsedRange.Rows.count
columnCount = Sheets("Sheet3").UsedRange.Columns.count
ReDim Assignee(rowCount)
ReDim tmpList(rowCount) 'helper variant to make it smoother for recall of lines
For i = rowDataBegin To rowCount
    Assignee(i - rowDataBegin) = CStr(Sheets("Sheet3").Cells(i, 1).Value)
    tmpList(i - rowDataBegin) = rowCount
Next i
Set dict = CreateObject("Scripting.Dictionary")
For i = LBound(Assignee) To UBound(Assignee)
   If dict.exists(Assignee(i)) Then
        dict.Item(Assignee(i)) = dict.Item(Assignee(i)) + 1
         Else
        dict.Add Assignee(i), 1
    End If
   Next i
Sheets("Sheet3").Range("$A$1:$I$" + CStr(rowCount)).RemoveDuplicates Columns:=1, Header:=xlYes
rowCount = 2
Application.Workbooks(1).Worksheets("Sheet3").Activate
'** Header values Change as needed
Sheets("Sheet3").Cells(1, 5).Value = "Completed Global Questionnaire? (Yes or No)"
Sheets("Sheet3").Cells(1, 6).Value = "Number of Countries"
Sheets("Sheet3").Cells(1, 7).Value = "Name of Countries Submitted"
For Each v In dict.keys
If dict.Item(v) > 0 And v <> "" Then
Sheets("Sheet3").Cells(rowCount, 6).Value = dict.Item(v)
rowCount = rowCount + 1
End If
Next v
Sheets("Sheet3").Columns("A:I").AutoFilter Field:=6, Criteria1:=">1", _
        Operator:=xlAnd
'** BEGIN TESTING AREA
'** Stage 2 Test Complete - able to retrieve a list of how many rows are in use
'** Stage 3 test - retrieve countries
Sheets("Sheet1").Activate
count = 2
For Each v In dict.keys
countries = ""
rowCount = 0
If dict.Item(v) > 1 Then
    With ActiveSheet
       Set rnData = .UsedRange
        With rnData
            .AutoFilter Field:=1, Criteria1:=v
           .Select
            'xlCellTypeVisible = 12
             For Each rngArea In .SpecialCells(xlCellTypeVisible).Areas
             tmp = .SpecialCells(xlCellTypeVisible).Rows
            Next
            For Z = 2 To rowCount
                If countries = "" Then
                    countries = .Range("I" & Z).Value
                Else
                    countries = countries & ", " & .Range("I" & Z).Value
                End If
            Next Z
        End With
    End With
     Sheets("Sheet3").Cells(count, 7).Value = countries
End If
count = count + 1
Next v
'** Testing block              **
Sheets("Sheet3").Columns("A:I").AutoFit
MsgBox "End loop"


The code below is only semi-tested but it should give you the idea of how to loop through the visible data of an AutoFiltered Range. You can't use code like "For r = 2 to Rows.Count" because the code stops after the first non contiguous row. However,
you can use For Each loop to loop through the rows and get the row number from there.
An explanation of the code to set rngVisible. (Note that a space and underscore at the end of a line is a line break in an otherwise single line of code.)
With .AutoFilter.Range   This is the entire AutoFilter Range (Includes column headers, visible and non visible rows)
.Offset(1, 0)     Moves down one row off the column headers but now includes an additional row at the bottom below the data. (Still includes visible and non visible rows)
.Resize(.Rows.Count - 1, .Columns.Count)     Removes the additional row due to Offset (Still includes visible and non visible rows)
.SpecialCells(xlCellTypeVisible)      Only include the visible rows.
    Sheets("Sheet1").Activate
    For Each v In dict.keys
        countries = ""
        If dict.Item(v) > 1 Then
            With ActiveSheet
                Set rnData = .UsedRange
                With rnData
                    .AutoFilter Field:=1, Criteria1:=v
                End With
                'Note that AutoFilter.Range is an inbuilt object variable _
                for the entire range covered by the AutoFilter
                With .AutoFilter.Range
                    'Following tests if any rows (other than column header) are visible _
                    in the AutoFilter.Range. If > 1 then more than just column headers. _
                    Attempting to set the rngVisible will error if not at least one row _
                    of visible data.
                    If .Columns(1).SpecialCells(xlCellTypeVisible).Cells.Count > 1 Then
                        'Assign the visible data to a range variable
                        Set rngVisible = .Offset(1, 0) _
                                   .Resize(.Rows.Count - 1, .Columns.Count) _
                                   .SpecialCells(xlCellTypeVisible)
                    Else
                        MsgBox "No visible data. Procesing terminated."
                        'Left for you to handle what you want to do if the _
                         filter does not exist in the data and no visible rows present
                        Exit Sub
                    End If
                End With
                'Loop through the rows of rngVisible
                'and get the row numbers
                For Each rngRow In rngVisible.Rows
                    Z = rngRow.Row
                    If countries = "" Then
                       countries = .Range("I" & Z).Value
                    Else
                       countries = countries & ", " & .Range("I" & Z).Value
                    End If
                Next rngRow
            End With
        End If
    Next v
Regards, OssieMac

Movie keeps stopping after 45 clicks

Hi,
My flash movie keeps stopping after I've clicked 45 times and
I've no idea why. There are lots of buttons on the page and when
you click them they count how many times the buttons has been
clicked and display this in a dynamic text box underneath the
button. Not very exciting I know, but very useful at school. When
I've clicked one button 45 times or a combination of buttons adding
up to 45 the movie goes white (my buttons disappear). I'm quite new
to flash so sorry if this is really basic.
Thanks,
Zoro

Thanks for replying kglad.
I've just realised what the problem is! I've only got 45
frames on my timeline and the code includes nextFrame so when it
gets to the end it doesn't know what to do. Dhurrr! I can sort that
out. Sorry to have troubled you.
Best wishes,
Zoro

Clementine 100 percent CPU use after quit

after i quit clementine, pause it or stop playback get 100 percent cpu. any ideas ?
when i start clementine from console this is what i get, the second part is after i hit the pause button
Couldn't load icon "clementine-panel"
Couldn't load icon "clementine-panel-grey"
Application asked to unregister timer 0x5b00000a which is not registered in this thread. Fix application.
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::translate: Painter not active
QPainter::save: Painter not active
QPainter::pen: Painter not active
QPainter::setPen: Painter not active
QPainter::pen: Painter not active
QPainter::setPen: Painter not active
QPainter::setPen: Painter not active
QPainter::pen: Painter not active
QPainter::setPen: Painter not active
QPainter::setPen: Painter not active
QPainter::pen: Painter not active
QPainter::setPen: Painter not active
QPainter::setPen: Painter not active
QPainter::setPen: Painter not active
QPainter::restore: Unbalanced save/restore
QPainter::translate: Painter not active
QPainter::end: Painter not active, aborted

I only get 100% CPU after quitting. There's a bug report here.
Seems to be something to-do with the nvidia drivers.
Play, Stop, Pause etc. seem to work fine and I don't get any QPainter errors so you've
got some other problems there.

Safari 5 Opens after Quit

Every time I boot up my Mac, and use Safari, everything goes well until I quit the app. About five seconds after quit, the icon starts bouncing again, and starts back up. I've tried rebooting, reinstalling Safari, and even wiping my entire OS clean! Still no stopping it. This problem really bothers me, and I want to know why this is happening. It also happens with Firefox, but I couldn't replicate the problem with Google Chrome.

HI,
After you erased and reinstalled the Mac OS X, if you didn't update the system software, that could be the result of both Safari and Firefox quitting.
Click your Apple Menu/Software Updates.
If your system is already up to date, Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: *Add-ons may cause Safari to unexpectedly quit* or have performance issues
Carolyn

Why is Logic Express 8 keep stopping after 2 sec, every time I press play? Help!!!

Why is Logic Express 8 keep stopping after 2 sec, every time I press play? Help!!!

Its likely to be caused by Ozone5.. many people have reported that plugin is currently quite unstable and are awaiting updates from izotope to fix the problem... No ETA has been given by izotope for the fix however...
Also several of your plugins are out of date (Zebra2, Clariphonic, Ozone itself.. to name but a few,)
Finally, you are running an older version of Logic Pro X (10.0.3)...and I would normally suggest you update to the latest version but... if you have a USB2 audio interface do not update to 10.0.5 at this time.... unless you know it will work correctly with the new version of LPX.

Stop and Quit LabVIEW Vi

I don't fully understand why I need the stop and quit labview vi. When a program finish running, doesn't it stop automatically? Why is the stop vi needed? If vi stops automatically when it is done, couldn't the programmer write the program in such a way that would cause the vi to stop when needed without using the stop vi?
When a program is running in exe, why is quiting labviw needed? Doesn't everything quit at the end of the program? In development, there is really no reason for the developer to want the LabVIEW to quit automatically, right?
Kudos and Accepted as Solution are welcome!
Solved!
Go to Solution.

jyang72211 wrote:
When a program finish running, doesn't it stop automatically? Why is the stop vi needed?
You never need the stop.vi. Its function is similar to the abort button, unconditionally stopping the VI, even if it is trapped in a parallel loop that cannot be stopped directly due to incorrect coding. Since the current state of other code parts is random when stop is called, the outcome might be very unpredictable and the program might stop without a proper shutdown sequence, leaving your instrument spinning or the hight voltages turned on.
For more details, read the online help. I never use it!
"Quit LabVIEW" has similar problems. You don't really want to use it during development, because, you might have unsaved changes.
My larger applications don't have a stop button, and can only be stopped with the [X] in the upper right corner. (Like any typical program: When was the last time you had to first "stop" internet explorer or MS word? :d) I use a filtering event to catch it, discard it, initiate a clean shutdown, and after everything is done, either stop in the development system or quit labview in the case of a built application (see code image).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
FinishApp.png ‏4 KB

Render engine does not stop after reaching 100%

It looks like to me that the render engine does not stop after reaching 100%. It does not affect the rendered file which is fine and complete
-the Pause and Stop buttons are displayed but have no effect on pausing or stoping the render
-when I want to quit SG, it locks up and have to Force Quit to get out of it.
I really like the program though and hope you are going to fine tune the UI and make it look like After Effect and Premiere.
I would encourage you to instaure round tripping between these two apps and SG.
It would be nice to have curves as well.
Thanks guys
Brice

Could you open the defaultTrace.X.trc files and check for the errors?
Good from my point of view is to make a search if those files for some stack traces with the string ".dsr."
Regards,
Aleksandar

Problem when exporting movie, video stops after 2 minutes

I set up a Project containing both images and videos. They were all shot using a digital camera (Canon SD400).
When I export the 5 minute movie, around 2 minutes the video freezes, but the music (from an mp3 file) keeps playing. At 2 minutes one of the videos start to play and the video has a little yellow button showing on it in the timeline. None of the other videos have this little yellow button, although I am not convinced that this is the one causing the problem. Here is an image of it:
http://dombovari.com/stuff/imovie.png
Any ideas why the video playback would stop when I export it? It plays fine in iMovie when I preview the project, but when exporting, the video playback stops.
Thanks!

I have this very same problem. All 640x480 clips shot with a Canon SD550. iMovie 5 will play back everything fine in iMovie, but once I export the file using H.264 or MPEG-4, the video stops after about 30 seconds (of the 3 and half minutes of the video). The music still plays, but the video has not exported properly (and it shows in the file size).
What WILL work is if you export it to web, but I can't use that. I need it exported at its full quality. (Also will not work, by the way.) But, again, it plays in iMovie just fine. I even tried exporting from the timeline file (with the reference media files) in the iMovie file package—but I get the exact same results.
Quite frustrating considering it works in iMovie just fine. Any other ideas, folks?
System/Software: MacBook Pro 2.0GHz, 1 GB, 256 X1600. Latest Tiger, latest QuickTime, latest iMovie HD.

Audio stops after about 5 minutes

After rendering/encoding, the sound on my finished DVD stops after approximately 5 minutes. It is fine on iMovie, and also is there in iDVD when using preview.
In contrast to other posts in this forum, there are no slide shows on my DVD, and all sound comes from the camcorder together with the video.
I am using "Create Disc Image", and I have tried both playing back with DVD player from that very disc image, and actually burning it on a DVD and playing it back from there.
I have also thrown out the whole iDVD project and started from scratch by creating a new project from iMovie.
Since my DVD is just about 60 min, I have also tried both "quality" and "performance" encoding - same result.
The audio stops in the middle of a 4-min clip as defined in iMovie.
I am using iDVD 5.0.1.
This process (importing from camcorder, editing in iMovie, building menus etc. in iDVD, creating disc image, burning) is something I have done for several DVDs previously without problems (but maybe with iDVD 5.0)

Thanks for your help! You helped solve the issue, albeit indirectly...
At this point, I want to share my experience, in the hope that it might be helpful to others:
After finding that chapter markers had nothing to do with the problem, I found that indeed my camcorder was set to the dreaded 12 bit. Oh dear! The original DV tape is long gone. (At first I did not expect this to be a problem, since I had made several DVDs successfully with the existing settings, but then there are all these horror stories in discussions about what 12 bit can do to you.)
So to rescue my movie, I found advice to "share" my iMovie back to a fresh DV tape, and then re-import it with the 16 bit setting.
This lead to the next issue: After a number of minutes of re-exporting to DV tape, the video received by the camcorder would freeze, while the audio continued. This happened at several different points in several differerent attempts.
So next I visited iMovie discussions, where I found advice to clean up my Mac. I used Mac Sweeper, and now indeed my Mac runs faster and smoother for many apps. I also downgraded my QuickTime version. But another attempt of exporting from iMovie to DV tape also failed, but now it failed at exactly the same point where the audio stopped in my DVD!!! (Even though on the export-to-DV-tape it was not the audio but the video that froze.)
Next I found that when playing that problematic scene in iMovie, the iMovie program would also freeze at that very point, making it necessary to "force quit" out.
In the end the solution was to chop out the problematic bit in that scene. Now everything works fine, including the iDVD step.

When i try to update cc downloadcenter it, stops after a while and shows an error

when i try to update cc downloadcenter it, stops after a while and shows an error ?

i tried every solution you suggested but nothing helped. And when i tried to download the cc desktop app.again it stopped downloading and gave an error code 207 and message that it could not
contact the server. ( i had internet open all the time and every other site wasconnected ) My premiere pro cc does also quit working when i try to do something ?

Gmail retrieval stopped after quitting MobileMe

Similar Messages

Maybe you are looking for