Gmail subject from different sender than its contents

Hello all:
Suddenly, a few days ago, I noticed that some (10%) of my gmail, downloaded using IMAP to Apple Mail, is curiously mixed up and missing:
The Subject and From are LinkedIn, but the Reply to and the entire BODY of the message are from WestJet airlines. There is no matching subject/from WestJet and no matching body from LinkedIn. Online, everything is fine - the problem is in the download.
I have not upgraded to Mavericks because I am afraid of such problems. Is there a quick fix? Rebuild? Thank you so much!
Tannis

I rebuilt the folder containing the problem emails and that seemed to have fixed the weirdness.
http://www.pinterest.com/pin/create/extension/

Similar Messages

OS4 email threading groups emails by subject from different people

Currently using iPhone 3GS with OS4.
Have email threaded turned on.
Gmail synced via exchange.
Gmail in actual browser has various threads for multiple contacts separated bit all with the same subject "2010".
Initially for the last week iPhone handled this the same way but suddenly today they all got grouped in the same thread. Is there a way to fix this? Will this be fixed in future releases?

remove the email address from your address book.

I am not able to buy a book from different region than my iTunes region.

I want to buy Mandela's way book, I have found it in US region, and did not find it in Egypt region, when I have switched my region to US my credit card was invalid. and I have failed to buy it. Any help

You can't download content(except for podcast episodes) from another country's iTunes Store. Check if it's available in a non-Apple store.
(94205)

Item shipped from different location than specified

I'm not sure if it's worth leaving lower feedback over. Most of the time I leave really positive reviews, but the seller said it'd be shipped from New Jersey and according to the tracking information it's actually coming from Sweden. The item in question is a laptop battery. Shipping was free so it's hard to complain too much, but I prefer having items shipped within North America to minimize risk of damage, had I known it wasn't coming from the states, maybe I would have gone with someone else.
Opinions? Am I just being a , or is this a legitimate concern?

Good point, once it arrives I'll go from there. I understand how big of an impact negative feedback can have on the seller, so unless something is wrong I'll probably leave five stars.
After closer inspection their listing does say "We'll find the nearest warehouse to ship from". I just question their math if Sweden was the closest.
I guess it's just the principle of it. If an American seller offered something for $5 and just out sourced the order to a Chinese distributor it seems like it should be fraudulent.

How to retrive latest items from different site collection using content search web part

I have a web application that contains two site collections(team site + enterprise wiki), with the following URLs:-
-http://applicationname/teamsite
-http://applicationname/enterprisewik
Now I need to display the latest 10 wiki pages that are inside the enterprise wiki site collection (according to the modified date) inside the team site. So I read that using Content search web part allows for cross-site content query.
So I added a new content search web part , inside my team site, and I click on “change query” button. But I am not sure how I can reference the enterprise wiki site collection's library and to specify that I need to get the latest 10 wiki pages using the
content search web part's query dialog box? Can anyone advice please ?
Thanks

Edit the webpart and click change query in search criteria. click on switch to advanced mode and enter your path:
(path:"http://applicationname/teamsite" OR path:"http://applicationname/enterprisewik")
you can specify sorting by created date and click ok. in number of items to show, type 10. this should fulfill your requirement.
For further reading, here are some links:
http://office.microsoft.com/en-001/office365-sharepoint-online-enterprise-help/configure-a-content-search-web-part-in-sharepoint-HA104119042.aspx
http://blogs.technet.com/b/tothesharepoint/archive/2013/04/30/stage-9-configure-the-
query-in-a-content-search-web-part-on-a-category-page.aspx
http://blogs.technet.com/b/tothesharepoint/archive/2013/05/23/stage-10-configure-the-query-in-a-content-search-web-part-on-a-catalog-item-page.aspx
kashif

HT4191 how do i lock or hide the notes apps from being accidentally deleted its content?

How do i lock or hide 'notes' apps from my ipad so that the won't be accidentally deleted by my daughter?

The built in Notes app does not have such a feature. However, I'm sure among the hundreds of note apps available in the App Store, some of them offer passcode protection. You're just going to have to search.

How to download app updates from different account than original app purcha

I have a collection of apps on my iPhone that I bought through my original iTunes account, then later I signed up for a second account (because I was confused and I didn't know what I was doing) so my more recent apps were bought through that second account. I really would like to close the older account because I have no use for two separate accounts.
But here's the problem: when I update an app, iTunes remembers what account I originally bought it under and asks me to sign in to that account. So if I close the older account I will no longer be able to update any apps that I purchased under that account. Is there a way I can fix it so that I can close the old account but still be able to update those other apps?

there a way I can fix it so that I can close the old account but still be able to update those other apps?
No.
You will need to use both accounts to update your apps unless you repurchase them on the new account.

Receiver determination when merging messages from different senders

Hi BPM/XI experts.
In my BPM scenario, I am combining 2 messages from different sender/interface/namespace. How should receiver/interface determination be configured in this case since in the ID both these configuration objects take exactly 1 sender interface?
Thanks.
Carlos
<Moderator note: moved to more appropriate XI forum>
Edited by: Mike Pokraka on Jul 22, 2008 10:30 PM

Hi,
Refer these blogs
Walkthrough with BPM - walkthrough of bpm
Delivery Modes in BPM. - delivery modes of bpm
Model-Driven Development in the Enterprise - development in Enterprises
The specified item was not found. - sender idoc packing
Regards,
Suryanarayana

Mac OS 10.5 / I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!! I do have the OS dvd that i purchased years ago... But my computer will not start from it on its own. My

Mac OS 10.5 /
I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
I do have the OS 10.5 dvd that i purchased years ago...
But my computer will not start from it on its own.
My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info? I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
Once again there is not a copy of this file or its contents in the recycle bin...
Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
Lol It was a bad choice to delete this file ...
Thanks guys

Okay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
Anyway here we go...
Okay so first things first.... Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
-------If you dont want to read through the whole story the fix is summed up in the bottom section-------
Okay so now the SOLUTION!!!!
By trial and error , and pure boredom I opened up my computer to clean the inside...
AND
"Disconnected the primary HD"
and just because ....... REBOOTED my computer. Just to see what it would do.
Upon restart and though it looked like it would repeat its usual cycle...
About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
After a bit of trial and error...
I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
this setting is under
Utilities / startup disk
After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
So upon this discovery
I went to the Disk Utility located under Utilities
Highlighted my primary HD located in the left hand column
Once highlighted ...
In the heading section on the right I selected the option
Erase
in which I erased My current OS on my primary HD ...
I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
I FORGOT to add something...
Another reason why I deleted my primary HD!!!!!
I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
So back to the next step...
I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
But ofcourse it had no name because it we previously erased it.
So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
Which said it would take about 57 minutes ... But I believe was alot less...
My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
It was like I was setting up for the first time ;) asking for my registration info...
The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!!
Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
-------One more time the fix------
*Insert your OS dvd into your dvd rom drive.
*Unplug your primary HD or corrupted startup disk
*Reboot your machine...
Upon restart your primary HD will not be recognized...
* you will then be prompted to select your language.
Once selected
*Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
* Click restart...
!!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
If you do not replug your HD before the chime it will not be recognized.
In that case restart again.
Upon restart once again
*Choose your language...
*Click Utilities / disk utility
In the left column select and
*Highlight your HD ...
Then towards the top portion / center of the page
*Click the heading Erase
Then on the page toward the bottom
*Click security options
This will then provide erase options.
I USED THE FIRST OPTION
"Dont erase data"...
*click OK
* click erase...
Once erased which should take a few seconds
*Cancel the disk utility...
* Click Utilities / startup
And your newly erased HD should now appear in the list.
* Select your drive from the list by highlighting
It should no longer have a name.
*Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
Thats it!!!!
Once everything reinstalls re-add your personal info or registration info and you are up and running.
Goodluck ;)

IPhone Mail Sending from Different Accounts

I have taken a look and cannot see anything on this topic - but I am having trouble with my iPhone sending emails from different accounts.
I have 5 IMAP accounts setup for different emails. When I go to send from one account, it seems to send from my GMail account (which is first in my email list), this is also true for when I reply or forward emails from any of the 4 other accounts.
I thought this might be due to the default mail option in the settings, so I changed this to another account but it was still all sending from my GMail account. When I turned the GMail account off - all accounts worked fine independently.
Has anyone experienced this and know if its a setting somewhere? or a problem in general?
Many thanks

I am not sure - but I have had to disable the GMail for now so that I can send and forward from my other accounts. Its rather annoying that its defaulting to sending from the GMail account.
Do you think deleting the account and then re-adding it will make any difference?

When someone sends me an imessage, it plays a different tone than i chose. Please Help.

Whenever i get a message from imessage (text works fine) i get a different tone than what i chose - specifically 'Bulletin' - and i don't know ow to change it to the one i want. When someone sends a text however, it plays the tone i want. How do i get iMessage to play the same tone as the text tone?

* correction * When people send me messages from iPod/iPad it works perfectly fine.
It just doesnt play the tone when iphones imessage me. (if it helps, its a customized tone)

Problem sending mail from different location

I cant send mail when connecting via a different server than my own network provider i.e. when connected wirelessly away from home office. Comes up with message:-
Verify that you have addressed this message correctly. Check your SMTP server settings in Mail Preferences and verify any advanced settings with your system administrator.
The server response was: <[email protected]>: Recipient address rejected: Relay access denied
You can try to send using a different server. All messages will use this server until you quit or change your network settings.
If I change the outgoing smtp setting to the network provider that I am connected to then mail will send.
Can this problem be rectified?
Kind regards

Most, if not all ISPs used for connecting to the internet now block the use of SMTP servers that are outside of their network (or not provided by the ISP) on Port 25 or what is termed "relay access" per the error message.
Some ISPs allow the use of an authenticated SMTP server only that is outside of their network on Port 25 but some block its use regardless.
These restrictions are in place as part of an overall effort to prevent spam emanating from the ISP's domain.
If the ntlworld SMTP server is not authenticated (even if authenticated there is no guarantee it will work depending on the restrictions imposed by the ISP used for connecting to the internet other than your own), you can try changing the server port from 25 to 587 but doing so is no guarantee either.
Go to Mail > Preferences > Accounts and under the Account Information tab for the ntlworld account preferences at the SMTP server selection, select the Server Settings button below.
Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
If ntlworld has an authenticated SMTP server and it doesn't work on Port 25 when connected to the internet via a different ISP or using Port 587 for the SMTP server doesn't work regardless if the SMTP server that is outside of the ISP's network is authenticated or not, your only other option is using the SMTP server provided by the ISP used for connecting to the internet.
There is no other way to rectify this problem regardless the email client used or platform - OS X or Windows.

I backed up my old core 2 duo imac and and was trying to transfer files to my new 2011 imac and when i go to oppen a folder from what i transferred it says "The folder "Music" can't be opened because you don't have permission to see its contents."?

I backed up my old core 2 duo imac and and was trying to transfer files to my new 2011 imac and when i go to oppen a folder from what i transferred it says "The folder “Music” can’t be opened because you don’t have permission to see its contents". Why cant i access the files from my old mac? I tried the time machine and that isnt working either. I have files that I need to use on my new mac, all my old programs and such. I thought they said it was easy to get your files from one mac to another. Please help.

Your account names are probably different on the two Macs. If you know the UNIX command line, open a terminal window and run:
$ id
You should see a line that starts with something like this:
uid=501(your_user_id_here)
now check the owner of the folder you copied over:
$ ls -ld Music
drwx------+ 8 some_user_id_here staff 272 May 14 16:08 Music
Do the IDs match? If not, you could change the ownership. Say your id is "johnsmith"
$ chown -R johnsmith Music
Now try and access it with iTunes.

TS3899 Hi. How do I attach more than one document to an email on the iPad, especially if they come from different apps? When writing an email on the iPad there's no option for attachments.

Hi. How do I attach more than one document to an email originating from my iPad, especially if the documents come from different apps? When starting an email there's no option for attachments, unless you send the document from inside an app like iBook and then you can only send one at a time.

How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
 Cheers, Tom

Can someone take the eyes of one photo and move it to the other? . we took family photos and his eyes are all squinting except in 1 photo and my wife wants those eyes on the a different picture. please email me at Dunworth.m Gmail and i will send you the

Can someone take the eyes of one photo and move it to the other? . we took family photos and his eyes are all squinting except in 1 photo and my wife wants those eyes on the a different picture. please email me at Dunworth.m Gmail and i will send you the photos. i can pay pal you like 5 bucks apon completion

Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you.

Gmail subject from different sender than its contents

Similar Messages

Maybe you are looking for