Gmail takes forever to load, it's really frustrating.

I have trouble with gmail loading each day. It takes forever. I use wireless internet and asked gmail about the problem. They couldn't solve it now what do i do to fix this?

Hello!
I've got the same problem but not only with Gmail, but with Google as well. I didn't bother writing to the Google guys because it worked with MF 4 B12 and works with other browsers, the problem only occurs in MF 4 RC.

Similar Messages

File encoded with x264 takes forever to load in Encore CS 5.5

I use Encore mostly because it takes h.264 video encoded with the x264 compressor, which provides much higher quality than any other compressor. The problem is that these files take forever to load. For example, right now I'm trying to load a video that is about 1 hour and 20 minutes long, encoded at 38 Mbps, and the file is 20.9 GBytes. Now it's 3 PM and I imported this file along with the AC3 file over an hour ago. The Encore process shows as not responding, but when I open the Windows 7 Resource Monitor, in the disk tab it shows that it's reading the video file at a rate of about 45 MB/s, so I didn't kill the Encore process. I know eventually it's going to stop and load the file, but I don't understand why it takes so long. The encoding parameters that I used in x264 are these:
x264 --level 4.1 --bluray-compat --preset slow --bitrate 38000 --keyint 30 --min-keyint 2 --open-gop --weightp 0 --slices 4 --vbv-bufsize 30000 --vbv-maxrate 40000 --rc-lookahead 40 --tff --output "output" "input"
This comes from a family video that is 1080 59.94i. This time these two parameters appeared because I selected Blu-ray as the target: --bluray-compat and --open-gop, which I don't normally use, but still, even when I don't use them, video encoded with x264 takes forever to load. Does anybody here know what could be the problem?

What's weird is last year I encoded a file that was almost two hours long and Encore took it without trouble, although it was CS5, not 5.5. Since I had kept the avs and bat files, and also the x264.exe from that encode, I brought them into the current working folder and I just modified the file names in the avs and bat files to point to the new avi and encode to the new h264 file. So I encoded this file, I imported it into Encore, and it still hangs. Maybe it was a change from CS5 to 5.1 that introduced a problem. x264 has been certified to be Blu-ray compliant since over a year ago, and I already put this file to a Blu-ray with TSMuxer, since it was a family video and I didn't really need menus, and it plays perfectly fine in my Blu-ray player.
But I'm sure there must be something, one or two parameters that would make it compatible. For example, after encoding the file again the last time, now I can import it into Encore, and it doesn't stay frozen forever, but it doesn't show me the video and as soon as I try to move the timeline cursor it freezes and doesn't let me do anything for several minutes. So still it's not usable. But it's a change from the first encode where the progress dialog would be there for several hours and do nothing at all.

ITunes takes forever to load

When i first got my computer and installed iTunes, everything worked fine. then when my Norton internet security expired it really slowed down. like it takes 10 minutes to just go to the iTunes homepage, ON A GOOD DAY. About a month ago i installed Norton 360 (better than the one before) and iTunes still takes forever! Does anyone have any help?

No help - but I have the same problem. Not only does it take forever to load but once it has loaded it takes forever to move around the library

Nothing is working right, it freezes all the time and takes forever to load

The first time I switched to Firefox 4 it worked really fast but since then it takes forever to load, the pages freeze, some sites don't recognize 4. It is very irritating trying to just get on the internet. Facebook will load slower that ever and freeze constantly. Other sites partially load then freeze. Typing anything will often freeze in mid word. I hate this. What is going on?
What is all this stuff at the bottom in the "Installed plugins" section?

Here's a novel thought. Take it back to the vendor. Should have done that one week ago.

Microsoft Office 2008 & other programs take forever to load & run

Ever since I installed Snow Leopard on my laptop, my entire Microsoft Office 2008 suite takes forever to load and to operate. It also seems to have slowed down the processor for almost all other applications, especially Safari. I have Snow Leopard on my desktop as well, and both computers are at least 2 years old but are Intel-based, and only the laptop (which is newer - 2008) seems to have consistent speed problems when loading the Microsoft software. I've uninstalled and reinstalled more than once, and it never seems to do anything. I've even used a newer version of the software with the same results. Any thoughts? I know very little about programming language, etc., I'm just a habitual user, and I use both computers every day, so the slow speed of the laptop is extremely frustrating. It doesn't matter if other programs are running or not, it's always slow to open and 9 times out of 10 slow to operate, and probably 7 times out of 10 it affects performance of other programs as well.

Macintosh HD/Applications/Utilities/Disk Utility.app
I'm really sorry your having these issues. I used to always run apple's Disk Utility with past Mac OS. I'm really happy with 10.6. And one of it's big selling points at one time was that it's a leaner meaner version of Mac OS X.
Now, in using it, if it is new to you, it cannot repair the active start-up HD. But I think it can "verify" and look for issues and then let you know if you need to pursue further use of the application. To actually make repairs to your start-up HD, either boot from another HD or the Mac OS install CD. To do that, restart your machine with the CD inserted and while holding down the "C" key. It's been awhile, so I hope I have this right and am not misleading you.
It can be a tedious process. But good for you in having more than one Mac to work from.
My apologies if you have already done the above and are well beyond what I've written here. Disk Utility really gives and end user like myself away to trouble shoot a HD.
Also, inside your Apple drop down menu for "About this Mac," you can opt for "More info . . . ." This shortcut opens System Profile. While there, look for Diagnostics under Hardware. This tells you the results to the Power On Self-Test and when it was last performed. Also while there, look at your Memory. To the far right of its table for each installed memory module is Status for each. That should read "OK."
Best of luck to you! Slow machines are never fun!
Linc

Quicktime X is incredibly slow and previews take forever to load

Quicktime takes forever to load an MKV (Perian installed), but also takes its sweet time with other longer vidoes. Finder Previews (off to the side in column view) take forever to load, with QTserver (I think that's the process) taking up huge cpu resources while doing so.
I want to love Quicktime, I really do. It looks great. But its performance is just utterly frustrating at times. I don't know what happened but I never had these problems with Quicktime 7.
Why the does Quicktime behave like this?

http://arstechnica.com/apple/reviews/2009/08/mac-os-x-10-6.ars/6#qtkit
You don't have to use the X version of QuickTime on your Snow Leopard machine. You can use QuickTime Player 7.6.3 if you like.

Small Quicktime movies & music show as 'Q' icons - take FOREVER to load

I have a site - joelplimmer.com (I created a re-direct - it's my iWeb .Mac site really) and the Quicktime content is taking forever to load - it USED to load fairly quickly - I have gone into 'package contents' in my 'domain' file in application support and looked at which files are too large - strangely, most are < 10 meg, but many of those are ones that take forever to load. I've minimized some of the larger files I had on the site - still no luck on .Mac (it looks fine when I publish to a folder, of course). So, I tried deleting EVERYTHING in my joelplimmer.com folder on my iDisk and re-publishing from scratch, STILL the same thing. I have tried this from different computers, both Mac & PC - with the same result. Does anyone know what could be the problem?

Of course it takes ages to load.
4 movies on a page, 6 audio files on a page, I lost count. I left before the encore.
Most problems are not technical.
Just using your brain will solve them. Try it.

Devices and Printers Menu takes forever to load

Devices and Printers Menu takes forever to load in WIndows 8.1.
For some reason the green bar goes all the way across the top of the screen before the devices and printers
menu will load. It then loads without an issue after waiting for almost two full minutes.
This is a core I7 Win 8.1 PC with 16GB of ram and an SSD so it screams otherwise.
I do have a lot of devices on my home network but my windows 7 PC which is on the same network loads the devices
and printers menu almost instantly. If it were a device hanging up you would think that the Windows 7 PC would also be affected but it isn't. I will say that Windows 8.1 does identify a whole lot more devices that fall into the category of "multimedia
devices" on the network than does windows 7.
I have tried accessing the menu from safe mode both with and without networking and it takes just as long
to load.
I have noticed that most of the devices in Devices and Printers also show up in file explorer under network.
There is however no delay accessing that menu.
I don't really have a good feeling as to how to go about troubleshooting from here?

Hi,
For the issue, it seems one of services related to device stopped.
I suggest you check the services to see if they start.
Please refer to the following link:
http://techietalkz.com/2009/10/02/how-to-solve-windows-7-devices-and-printers-forever-loading-and-blank/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We can try testing if the method in Windows 7 can work on Windows 8.1 computer.
If it doesn't work, I suggest you remove all device to test it.
Meanwhile, let us try SFC tool to check the result.
Use the System File Checker tool to repair missing or corrupted system files:
http://support.microsoft.com/kb/929833
Regards,
Kelvin hsu
TechNet Community Support

Macbook takes forever to load websites and often they won't load at all - yet my pc flies along

macbook takes forever to load websites and often they won't load at all - yet my pc flies along
I downloaded the Open DNS thing and I havne't got a masters degree in computers - so i haven't a clue what it does or what its supposed to do.
Overall i'm really really sorry i bought an apple and i won't be doing it again - i just need it to access the web properly!

When i click to 'go to video' a page opens onto eurosport but the video won't appear - there's just a blank spot on the page where it should be.
i get some of the pictures on the page but lots of black squares where other pictures should be.
Make sure you have the following installed:
Flip4Mac
VLC Media Player
Perian
Adobe Flash Player Software
After the installations, repair permissions and restart your computer.
I downloaded the Open DNS thing and I havne't got a masters degree in computers - so i haven't a clue what it does or what its supposed to do.
Uninstall it asap. In order to avoid damaging your system/directory which can result in costly repairs, never install software if you do not know what it does and/or you have no clue on how to use it. If the software comes w/instructions (Read Me file), read it prior to installation.

Dynamic parameter takes forever to load

I have a dynamic parameter that takes forever to load. I made the report using CR11 and that parameter took like a couple of seconds to populate the data. Now I am using CR13 latest version and it takes around 5 minutes to load 50 records.
Any help will be really appreciate it.

Hi Otto,
Does it happen with all reports that have Dynamic Prompts?
Did you try creating a sample report (maybe against the Xtreme Sample Database) with dynamic prompts and see whether you experience the same behaviour?
-Abhilash

Firefox (for android) takes forever to load or doesn't load at all

Firefox will not load or takes forever to load (i.e. up to 3 or 4 minutes) mostly, I get an "unable to connect" "offline mode" error. Other apps that use data are able to connect to the network, but FF...not so much.
I'm on a Nexus 5 running kk 4.4.2

fixed the "offline mode" problem by following the about:config directions
[https://support.mozilla.org/en-US/questions/962245]
unfortunately, pages still take so long to load it basically renders Firefox useless.

I have IE & Firefox on both my laptop and desktop. Why is Firefox so much slower than IE7? Firefox seems to take forever to load pages!

I have a HP laptop & Dell desktop with IE7 and Firefox. I use Firefox more as I like it better than IE, yet the pages in Firefox load so slow. I thought the new version of Firefox was so much faster, but it seems to drag along and take forever to load pages. Why is this??
== This happened ==
Every time Firefox opened
== 6/17/2010

Please ask your question on a forum for the Flash Player

No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?

No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?
I've tried safari, chrome, firefox...I've cleared the cache as well. This has been going on for several months and used to be tolerable as it was not every website. Now it has become every website and is impossible to deal with. My roommates computer and my cell phone connect fine. I'm fully connected to the router yet websites don't load. I'm using 10.7.5. Thank you!!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

IPhoto 9.6 on Yosemite--Opening Faces keeps crashing my system. When it doesn't crash, it takes FOREVER to load. Help!

Since upgrading to Yosemite & iPhoto 9.6, any time I try use Faces, it takes forever to load, then crashes computer. How do I fix this? (besides not using Faces).

Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - from the resulting first aid window repair permissions and if necessary rebuild your database
LN

Quicktime videos take forever to load on my system

Is it me alone, or does anyone have the same problem? I have a excellent system, and nothing takes forever to load on it, only Quicktime videos. The only reason why I use quicktime on my XP machine is to watch the videos that are downloaded from my Kodak camera memory card since the camera saves its video files as quicktime videos, but it takes forever for the video files to load after I have downloaded them and saved them into a folder on my system. When I want to go back and view the videos, the folder freezes until all the videos, even if it is only one video in the folder loads. Why is that? Other video files load immediatley from avi,wmv,to divx,etc.
Does anybody have a solution?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Gmail takes forever to load, it's really frustrating.

Similar Messages

Maybe you are looking for