Gmail user name box turns red - cant log in

I have E5,
uptill now i was using net browser provided with nokia to login to my gmail and other web pages accounts.
Since last 5 days when i go on gmail web page from my phone, and i enter the username , the password and click the login button, the username box turns red.
I could not log in. i tried to solve the issue by restoring factory settings. But still unable to resolve the problems.
Other accounts i can log in like yahoo, irctc etc.
This is happening to gmail only.
Please help.

Hi atulkatariya,
Thank you for your post and welcome to Nokia Support Discussions!
The issue you described may be due to some changes made to the service or a password change. So we would advise you to log on to your Gmail account using a computer and check if it requires you to go through a captcha verification. If so, just fill in all the details they ask and you should be able to access the service again.
Let us know if this helps!
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Similar Messages

Red Timeline box. Not render line entire timeline box turns red

I ran into an issue on Premiere Pro cs3 after updating my mac to Mountain Lion. No issues until update. The entire timeline box turns red when I insert a video. Not the render line but the entire box turns completely red. anyone have any ideas?
I realize I need to update, I am a college student, but I do freelance for a nonprofit so I need this up and running as fast as I can.

That SEEMS like a case where your graphics driver needs to be updated... but NO way for anyone to tell without hardware information
More information needed for someone to help... click these links and provide the
requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
ADDED
IF you have nVidia (you did not say) read
Mac & nVidia Driver http://forums.adobe.com/thread/1075592

Blank User Name Problem when trying to log in to email set up

Hi,
I've seen this issue posted on various places on this forum but no satisfactory answers.
I want to add and remove email addresses on my Blackberry Curve and also change the message that is seen when I send an email from the Blackberry.
When I type my username and password which is correct according to Options-Device etc, it says "blank user name. Type a valide user name."
I have spent hours on the phone with t-mobile on several occasions and nobody seems to be able to help.
I remember having this problem ages ago and some kind person gave me a website address where I could change it online and told me I shouldn't have that web address so to keep it quiet but of course I changed laptops and it got lost.
Can anyone help before I throw the phone in the bin?
Jan

After hours on the phone to my provider (unsuccessful) and hours trawling the internet, I found this answer on another forum http://answers.yahoo.com/question/index?qid=20111109185521AA7xg7m and this has enabled me to get round the problem. Hurrah!
Just thought this should help someone else if it was the emails and/or signature you were trying to change.... I would still like to know why I can't log in normally tho if anyone can help!

Authenticated user name not written to access log file

Our users are authenticated with certificates to an LDAP directory server. The Access log file is using the Extended-2 format.
The name of the authenticated user is now written in the Access log.
10.4.57.44 - - [19/May/2004:14:07:21 -0400] "GET /somepage HTTP/1.1" 200 10382
Anybody know why?

I've got the same problem with Sun Java System Web Proxy Server 4.02 for Linux.
When I installed it, authenticated users were visible in the access log. Then I tryied to change format and since that moment, this information is disappeared.
Any news about this bug?
Thanx.
G.

Gmail user name or password is incorrect

firstly there is already a thread about this that has been archived and i cant reply there
it was started more than a year ago and there is still no solution or explanation there?
so why was it archived and why am i having this problem on a new iphone4s more than a year later?
this is my first apple product after many years of spending £500+ every year on new devices that just do not work properly
i did fix this problem by visiting this link https://www.google.com/accounts/DisplayUnlockCaptcha
but today ive had to do it again
so can someone fix it please

firstly there is already a thread about this that has been archived and i cant reply there
it was started more than a year ago and there is still no solution or explanation there?
so why was it archived and why am i having this problem on a new iphone4s more than a year later?
this is my first apple product after many years of spending £500+ every year on new devices that just do not work properly
i did fix this problem by visiting this link https://www.google.com/accounts/DisplayUnlockCaptcha
but today ive had to do it again
so can someone fix it please

TS3899 Cannot get mail because gmail user name or password is incorrect

Need assistance in trying to get mai

Try going to settings then go to mail and then click sign out and then sign back in. That may work.

I tried to share a photo using e-mail and when I set up my gmail account I typed in the wrong user name and password. Now i can't share photos using e-mail.

I tried to share a photo using e-mail and when i set up my gmail account I typed in the wrong user name and password.
Now I can't send a photo because i get an error message saying the user name and password do not match.
How do i save a new gmail user name and password??

iPhoto Menu ->
Preferences ->
Accounts ->
Delete and recreate your email settings.
Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.

"Logon failure: unknown user name or bad password" even with correct Credentials

I have networked PCs before many times successfully, so this is not my first time trying to network PCs in a home environment. Though I’m wondering if Windows 8.1 is part of the problem.
I would have thought that for sure, until one of the new laptops running W8.1 would not connect to any of the other three PCs/Laptops running W8.1. Yet these other three W8.1 PCs/Laptops CAN connect to this laptop. Then it gets a little more interesting:
this same laptop that couldn’t connect to those three W8.1 PCs/Laptops, CAN connect to a Windows 7 desktop, and a XP Laptop, and those two can also connect back to it without issue. It’s almost like my network is divided in half, and only half can talk to
each other. But then when I thought it couldn’t get any more interesting, I realized the first three W8.1 PCs/Laptops can talk to the others, it’s just that the others (W8.1 Laptop, W7 Desktop, XP Laptop) can’t talk back to them without getting the error,
"Logon failure: unknown user name or bad password” even though the username and password are 100% correct.
I don’t fully understand this error, because on the surface, it’s just WRONG!
My username and password are correct, but it appears something somewhere is interfering or hijacking the authentication process. Three of the computers (laptops) are brand new, just purchased last week and setup this week. The HostPC is also fairly new,
just purchased last month.
I am not using a HomeGroup, and have removed all computers that were part of a HomeGroup. I have enabled file sharing and network discovery and enabled “Use user accounts and passwords to connect to other computers” on all PCs.
I have DSL and am using the wireless modem provided by my ISP which has router functionality built into it. It is a Sagemcom Model: F@ST 1704N.
All computers are connected wirelessly. Time is correct on all PCs. I cannot use Group Policy, since they're all Standard or Home edition. DHCP is enabled and all computers are on the same subnet, using the 192.168.254.x range of ip addresses.
The six computers are as follows: (I figured this may make is easier to visualize the layout)
HostPC: HP Desktop W8.1
PC Name: DrsBlend
U/N: DrsBlend p/w: 123456 (not showing my real password)
PC1: HP Laptop W8.1
PC Name: DrsBlend-1
U/N: DrsBlend    P/W: 123456
PC2: HP Laptop W8.1
PC Name: DrsBlend-2
U/N: DrsBlend    P/W: 123456
PC3: HP Laptop W8.1
PC Name: DrsBlend-3
U/N: DrsBlend    P/W: 123456
PC4: HP Desktop W7 SP1
PC Name: DrsBlend-4
U/N: DrsBlend    P/W: 123456
PC5: Dell Laptop XP SP3
PC Name: DrsBlend-5
U/N: DrsBlend    P/W: 123456
Every PC stated above has the same user name and password and is logged-in with the username, DrsBlend and the password 123456. The "Logon failure: unknown user name or bad password” happens when trying to access HostPC, PC1, or PC2 from PC3, PC4, or
PC5.
The HostPC can see and connect to all the PCs, but only PC1 and PC2 can talk back or access the HostPC.
It’s like the HostPC and PC1, and PC2 are in their own little clique, and can talk back and forth to each other. Those three PCs can also talk to PC3, PC4, and PC5 as well, but PC3, PC4, and PC5 cannot talk back to them (HostPC, PC1, PC2).
Profile corruption? I would have entertained that thought, but the fact the first three PCs can access and talk to one another kind of defeats that idea, and the fact the PCs were just recently setup.
Firewall? Disabled, and disabled TrendMicro with no change. With them on/off, the first three PCs can still talk to each other and the rest of the PCs.
Anyone have any additional suggestions?

Hi，
How did you connect to other PCs? Do you use RDP to connect to other PCs? If so, check the version of the RDP, as I know, some low version RDP can't connect to higher Windows like 8.1.
And could you please tell us the detailed information about how the six PCs connect to the home network?
Can PC1, PC2, PC3 ping back to host PC, PC1 and PC2?
You can also run command " rundll32.exe keymgr.dll, KRShowKeyMgr " view the credentials stored in your PC,check whether this issue is related with some old credentials stored in your system.
Yolanda Zhu
TechNet Community Support

Using JCom for getting the user name

I am using jcom610-win.exe and weblogic610sp2_win.exe .I need to use the Jcom for getting the user name of the NT Iser Logged in.I have got the process for this on the page at http://e-docs.bea.com/wls/docs61/jcomreference/Security.html .But this page uses a method isCallerAuthenticated() from a class file called jcom .I looked into the whole bea directory but there was no class like in the server dir.Can you tell where to get this class from.And if this has not been provided into the jar files that come along with the installable then why is it mentioned in the page @ http://e-docs.bea.com/wls/docs61/jcomreference/Security.html

Hi.
You might have better luck posting this in teh jcom newsgroup.
Regards,
Michael
Manoj Gupta wrote:
I am using jcom610-win.exe and weblogic610sp2_win.exe .I need to use the Jcom for getting the user name of the NT Iser Logged in.I have got the process for this on the page at http://e-docs.bea.com/wls/docs61/jcomreference/Security.html .But this page uses a method isCallerAuthenticated() from a class file called jcom .I looked into the whole bea directory but there was no class like in the server dir.Can you tell where to get this class from.And if this has not been provided into the jar files that come along with the installable then why is it mentioned in the page @ http://e-docs.bea.com/wls/docs61/jcomreference/Security.html
Michael Young
Developer Relations Engineer
BEA Support

When I enter my user name and password for my e-mail account, the page won't open

My e-mail account page won't open after I enter my user name and password on the log-in page. I have vcrified with Suddenlink that my user name and password are correct.

Thanks Peter.
Partial success in that I have been able to get mails onto the iPad - however....
Progress from a previous 'rumage' on problem discussions. I have succeded in setting up the iPad so that it receives emails from the sky address under 'MAIL' on the iPad. However trying to open in the 'usual' way - safari - then sky - then email - enter user name and password - I get the same result - it just returns to the log in menu for sky email with user name and password blank.
I had a previous problem with the sky mail ceasing to show recent mails, frozen in time on the iPad. Somehow by trying some reset instructions I was able to 'unlock' the iPad and all was OK until it 'froze' again. This time I clearly screwed up attempts to unlock, resulting in not being able to access email accounts via the Sky site !!

IMovie and iPhoto App Store update has alternate email address for user name. how do I fix this??

The most recent updates to iPhoto and iMovie, that are in the App Store updates, has my alternate email address for my user name. I can't log into the update because I don't know the password. I have changed my user name to reflect the correct email address, but it still prompts as the alternate email address. Any ideas as how to fix??

If you have forgotten your pass work go to here:
https://iforgot.apple.com/password/verify/appleid
Geoff.

User names from Wireless LAN Controller

Hi all
I'm trying to get a report out of a Cisco 4402 Wireless LAN controller, showing all the current clients on a particular WLAN profile, with their user name.
The Monitor -> Clients screen shows me all the MAC addreses, and I can filter by WLAN Profile Name to home in on the clients I'm interested in. When I click on a MAC address for more detail, I can see the correctly populated User Name on the Client Properties screen - so the WLC definitely knows all the detail I need...
Ideally I want spreadheet with a list of usernames of currently connected users (or even better, users that have connected over a time period). I can't see any way to export this data without doing it manually (and I have 270ish clients at any one time).
I've tried at the command line, with a "show clients summary", which at least gives me a table I can copy and paste into a spreadsheet, but again the username detail is only displayed with a "show clients detail MACADDRESS" - and the MACADDRESS field won't take a wildcard.
I've also tried examining the log files, and setting up SysLog to a syslog server - but I haven't observed user names in any of the logs I've seen.
The WLC is on version 4.2.176.0 - and doing an upgrade isn't very convenient at present - although I might consider taking the pain if a later release provides the funcationaility I need.
Does anyone have any ideas on this one?
Thanks!

Dear Scott,
I have some points to get clarified for step by step approach that has to be carried out during our downtime, or which is best option for this migration.
Is that the WLC running different code will be able to join Mobility Group. i.e. irrespective of Model and Code ?
1. Do i have to create a mobility group and include the existing WLC and new 3 numbers of WLC , thus when i remove the Existing WLC from the Group the Ap will try to get assosiated with other WLC in the group.
2. In WCS changing the Access point template configuring primary, secondary , tertiary Wireless LAN controller with New wireless LAN controller, during the down time this activity will be performed.
Which method or way to proceed during the downtime. Looking for your expert view.
Thanks .... Arun

Image turns red when trying to add text?

I'm using CS5 64 bit on a Win7 64-bit machine, with 8GB RAM.
I have been creating images, then adding text to them, with no problem. All of a sudden, something is going wrong.
I have created an image out of a white background with green text. I saved it as a .psd
Later, I opened it in CS5, and clicked the Text tool. I put the cursor on the image, and the whole image box turned red.
All the options under Layer (like New or Duplicate) are grayed out.
The Layers box shows just one layer, named Index. Right clicking on that shows all grayed out options.
I also tried to add text to a previously saved .jpg with the same result.
If I make a new image, I can add text correctly.
And I can also add text to other .jpgs I've made previously.
So apparently it is something to do with the way these particular files were saved or something?
I tried resetting the Text tool but that did no good.
What am I doing wrong? What makes these images different?
I tried to upload the .psd image in question, but I got an error message saying that "the content type of this image is not allowed".
Thanks!

If you want to post a large image or one of a format that isn't supported by direct attachment here, here's a suggestion:
Go to YouSendIt.com.
Create a free account.
Upload and send the image to yourself.
When you get the URL, post it here.
-Noel

What exactly is my"User Name"

what is "My User Name"

What you use to log into your computer. It is the folder name you will see underneath your Home folder which is in the /Users/ folder.

I still can't erase an incorrect user name from the password file.

I have been using a web site for a long time. Suddenly the user name that is supposed to be stored in my "password/user name" file is not working. I totally deleted the web site from that folder. When I go to log in, it still automatically comes up with an incorrect user name.
Example:
The correct user name is "[email protected]", but Firefox is coming up with "ab%49gmail.com"
All of this even though when I went to the Security tab and have deleted the web site from the file, completely, Firefox still brings up the wrong user name when I go to log in.

Use these steps to remove saved (form) data from a drop-down list:
#click the (empty) input field on the web page to open the drop-down list
#highlight an entry in the drop-down list with the mouse or cursor Down key<br>do not click the mouse or press the Enter key
#press the Delete key (on Mac: Shift+Delete) to delete the highlighted entry

Gmail user name box turns red - cant log in

Similar Messages

Maybe you are looking for