GMT time stamps interfere with calendar in 8.1.2

How do I prevent GMT time stamps from interfering with my calendars? This did not occur until I upgraded to OS 8.1.2
I sync an iPod touch 5th generation with google calendars, and have done so with this device for over a year, and on a generation 3 device for four years - all without hassle.
Since upgrading to 8.1.2 my calendar is suddenly very difficult to use.
-Chris

Sushil,
Please post this question in the Workshop 8.1 beta newsgroup.
weblogic.developer.interest.81beta.workshop
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=xover&group=weblogic.developer.interest.81beta.workshop&utag=
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Sushil" <[email protected]> wrote in message
news:[email protected]..
>
Hi All,
I am trying to develop JSP client for a conversational webservice. I amtrying
it in two ways and
none of them is working.
1)
I have put the Java Proxy file generated by Weblogic Workshop for myWebservice
in the lib
directory of the web application. According to article posted in "DearJohn" series,
my proxy
must have methods that take one additional argument to pass in Header infoapart
from all
the arguments mentioned by me. But, I don't see any methods like this inmy proxy
and
corresponding stub.
2)
Other suggested method is to use Webservices Control. In this, I amsetting a
string as
Conversation ID when I invoke a method that is marked to startconversation. Further,
if I
invoke any other method marked Continue in the same JSP it works. But,from another
JSP
where I set the same conversation ID and then try to call a method markedas Continue,
it does not work. It say, check whether you have start a conversation. Ican see
my conversation
in Test browser and I am calling continue method before max-idle-time.
I am not sure which step I am missing. Help Required!!!
Thanks in advance,
Sushil

Similar Messages

Will the wifi function of time capsule interfere with my existing router?

Will the wifi function of time capsule interfere with my existing home network via my Cisco router?

Welcome to Apple Support Communities
The routers will only interfere if they are working with the same channel. Time Capsule sets up automatically the channel, so you shouldn't have any problem with both routers

Time-stamp problem with tar

everytime i untar something i get:
[yak8998 files]$ tar xfj Azureus_2.0.8.4_linux.GTK.tar.bz2
tar: azureus/azureus: time stamp 2004-03-14 08:39:50 is 48653898 s in the future
tar: azureus/Azureus2.jar: time stamp 2004-03-16 13:00:23 is 48842329 s in the future
tar: azureus/id.azureus.dir.file: time stamp 2003-12-19 19:43:31 is 41263317 s in the future
tar: azureus/cpl-v10.html: time stamp 2004-02-12 18:42:42 is 46011668 s in the future
tar: azureus/lgpl-v21.txt: time stamp 2004-02-12 18:42:42 is 46011668 s in the future
tar: azureus/libswt-atk-gtk-3038.so: time stamp 2004-02-12 17:42:41 is 46008067 s in the future
tar: azureus/libswt-awt-gtk-3038.so: time stamp 2004-02-12 17:42:41 is 46008067 s in the future
tar: azureus/libswt-gnome-gtk-3038.so: time stamp 2004-02-12 17:42:41 is 46008067 s in the future
tar: azureus/libswt-gtk-3038.so: time stamp 2004-02-12 17:42:41 is 46008067 s in the future
tar: azureus/libswt-mozilla-gtk-3038.so: time stamp 2004-02-12 17:42:41 is 46008067 s in the future
tar: azureus/libswt-pi-gtk-3038.so: time stamp 2004-02-12 17:42:41 is 46008067 s in the future
tar: azureus/libsystray4j.so: time stamp 2004-02-28 05:35:44 is 47346850 s in the future
tar: azureus/mpl-v11.txt: time stamp 2004-02-12 18:42:42 is 46011668 s in the future
tar: azureus/swt-about.html: time stamp 2004-02-12 18:42:42 is 46011668 s in the future
tar: azureus/swt.jar: time stamp 2004-02-12 17:42:40 is 46008066 s in the future
tar: azureus/swt-mozilla.jar: time stamp 2004-02-12 17:42:40 is 46008066 s in the future
tar: azureus/swt-pi.jar: time stamp 2004-02-12 17:42:40 is 46008066 s in the future
tar: azureus/README.linux: time stamp 2004-03-08 10:33:00 is 48142286 s in the future
tar: azureus/systray4j.disabled: time stamp 2004-03-06 03:43:04 is 47944890 s in the future
tar: azureus: time stamp 2004-03-14 14:18:09 is 48674195 s in the future
[yak8998 files]$
and nothign works right...
but than if I
[yak8998 files]$ tar xfjm Azureus_2.0.8.4_linux.GTK.tar.bz2
it works fine...
I'm thinking this might have to do with the system clock, except in FreeBSD and the BIOS the date/time is correct.

I'm guessing your system clock is wrong in Arch. Type "date" and see if it's the right time... and check /etc/rc.conf to make sure you have HARDWARECLOCK and TIMEZONE set right.

How to use time zone settings with calendar events ??

After looking through the questions on time zones and synchronization, I still cannot get my Palm Centro to operate the way I think it should.
I have a Verizon Centro, am using Windows XP with Outlook, and synching via the Hotsync manager 7.02 over a USB cable. I am not using Palm Desktop.
I am expecting events to shift time in the calendar when I change the time zone, but they do not.
I am preparing for a trip. I enter several test events into MS Outlook placing the events to occur in a different time zone into my calendar at the time the event would occur in my home time zone (NY). For example, a meeting from 9-10 AM in Los Angeles is put in my MS outlook calendar as 12-1 PM on the day of the meeting. Then I sync, with the time zone of my Centro and Outlook set for New York. The Centro is set to update Date, Time, Zone automatically from the network in New York. The meeting event appears as 12-1 PM on the correct day.
Then I turn off the Centro phone (ie disconnect from the Verizon network), change the time update to "Nothing" -- ie entirely manual, change the time zone to Los Angeles and set the time to the correct time in Los Angeles. I expect the meeting to shift to 9-10 AM in my Centro calendar, but it does not !!!!! I try other combinations -- Leave the time update on Date and Time automatic, and change the time zone to Los Angeles, etc. I think I tried all the combinations. Throughout, I leave the Centro phone off of the Verizon network. I cannot get the meeting to change its time in the new time zone.
What is the trick ??? What did I miss ??
You might ask why I am trying this with the phone turned off -- that is because I am really going much farther than LA, and into a GSM network where I will simply use the Centro as a PDA.
Any advice appreciated.
Post relates to: Centro (Verizon)
This question was solved.
View Solution.

thepoeta --
Thanks for the response.
Indeed my preference was not set "new events use time zones".
Meanwhile, I had loaded all the applointments from Outlook, about 20 of them,
figuring I would just move them manually en route.
I will play with the time zone preference, but,
is there any way to identify the existing appointments in the
Palm as belonging to a different time zone, just using the Palm Centro ?
Thanks,
Neal

How to make time stamp start with 00:00 ?

Hi,, everybody,
I want to make the time stamp of Minec
but must start with 00:00 and when I start the acquisision the time increase. (Function looks like the sport clock)
I take a look in Labview, it has only time stamp with the current time.
Thanks for any kind help in advance.

Hello,
there are 3 links to your issue, which should answer your question.
http://pong.ni.com/public.nsf/websearch/0A4899EF6D01B9C5862568B70074F989?OpenDocument
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=50650000000800000088410000&ECategory=LabVIEW.LabVIEW+General
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B123AE0CBB5D111EE034080020E74861&p_node=DZ52026
Regards
Thomas D.
NI Germany
(SRQ 199423)

Changing an export file name by using a time stamp

Hello Everyone,
I am trying to create a way, utilizing the Report Attributes/Report Export field, to have an export file created with a time stamp associated with the file name.
The reason for this is that I have users who will do multiple exports to Excel from a single parameters driven report. As opposed to manually giving the file a unique name each time the export occurs, I would like to give the export a time stamp as part of the name therefore making it unique.
Any help would be greatly appreciated.
Thank you

I found the typo mm instead of MM which was my problem from the beginning. MM represents month not mm. A simple mistake that costed a lot of time. Thanks Mike
Cheers, you're very welcome. Glad I could help out.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Time Stamp

I am trying to add Time stamp along with the date. But using the TO_CHAR function getting error as Invalid Number.
Please help me to sort out this problem. The query for which I am facing this issue is.
SELECT A.NAME ,A.ounum ,A.divi,A.lastupd
FROM temp A
WHERE A.div ='2.3 xyz'
and A.OUNUM is NOT NULL
AND A.lastupd BETWEEN TO_CHAR('08-DEC-2008 00:00:00','DD-MON-YYYY HH:MI:SS')
AND TO_CHAR(SYSDATE,'DD-MON-YYYY HH:MI:SS')
getting error as Invalid number ORA-01722. Please suggest some solution for this.

SELECT A.NAME ,A.ounum ,A.divi,A.lastupd
FROM temp A
WHERE A.div ='2.3 xyz'
and A.OUNUM is NOT NULL
AND A.lastupd BETWEEN TO_CHAR('08-DEC-2008 00:00:00','DD-MON-YYYY HH:MI:SS')
AND TO_CHAR(SYSDATE,'DD-MON-YYYY HH:MI:SS')
A.lastupd - Is this a timestamp field or character?
If it is a timestamp then you converting your date in wrong type. It should be TO_TIMESTAMP and not TO_CHAR.
Regards.
Satyaki De.

Java time stamp

Hello All,
I want to create a TimeStamp Object.
I was using the constructor
TimeStamp s = new TimeStamp(2001, 07, 07, 0, 0, 0, 0);
Problem is that this constructor is now deprecated.
The new constructor takes a value of type 'long'.
But I don't know what to put in this long ?
Can anyone help?
regards,
Abhishek.

I know that new TimeStamp(System.currentTimeMillis()) would work but that is not what I want.
I do not want the current time.
I want to create an Time stamp object with the time
2001/07/07 00:00:00
regards,
Abhishek.

Split in stock transport order due to different time stamp in STR

Hi,
Deliveries created for stock PO's are splitted due to time stamp per seconds in the Stock PO. This originates due to timestamp set on the Stock transfer requisition created in APO. In this case several Stock transfer requisitions are consolidated to one Stock transfer order which is OK but it creates several deliveries due to the times stamp (split on seconds per day).
Request to suggest the way to avoid split of delivery due to time stamp.
With regards,
Mrinal

Found an user exit to remove time to avoid split on time.

Adjusting time stamp of AI waveform when using pause triggering

Hi Everybody,
I've written a VI that acquires data (AI) at specified time intervals
by using pause triggering and a counter signal, but the resulting time
stamps associated with the data points in the AI waveform are NOT the
actual time relative to the start of the initial acquisition. I was
thinking of modifying the time stamps (post-acquisition) for each set
of data points per interval by adding the "off" time as set by the
counter signal, thereby adjusting the time stamps of the data to real
time. I then have a subVI that will convert the time stamps to elapsed
time. I also have an AO waveform being generated at the same time, and
was wondering if I could somehow use those time stamps values if they
were synced to the AI somehow, although this seems more difficult. The
adjustment does not need to be extremely accurate, and can vary on the
order of seconds (e.g., the last data point could be at 9990 seconds
for an acquisition that actually ended after 10000 seconds). Any
suggestions?
As an aside, the important point of this part of my program is to
reduce the amount of data being collected. I need a high sampling rate
to acquire waveforms with pulse widths on the order of milliseconds,
but typically run the experiment overnight (+12 hrs.) so the files get
really big (e.g., 3 GB!). I could try writing to binary files, but I
haven't figured out how to read the file and then split the data into
smaller files of user-defined size that can then be converted to
text/.xls files. If you have any ideas on how I might do this as well,
I'd greatly appreciate the help! Thanks!
Unagi

Unagi,
I am not exactly sure what you are trying to do, but I can
take a guess. When performing analog input measurements the waveform is
composed of t0, dt and Y. You can manipulate any of these values after
the data has been acquired. If you set up the task the waveform should
contain an absolute time, not relative. If relative is required, as you
suggested, this can be done post acquisition with the build waveform components
vi.
I do not understand exactly what you want do with the
timestamps for the analog output. Do you
want to use the relative time computed from the analog input data for the
analog output waveform? If so, you could
build a waveform and use the t0, dt from the analog input processed/relative
time waveform. Again this would be done with the build waveform components
vi.
Finally, a binary file would reduce the amount of memory
required when saving your data. A binary file is fairly simple to save
and open in LabVIEW. There are a couple examples in NI Example Finder (i.e.
Write Binary File and Read Binary File) that show you how to write and read
binary files. If you write the data to a binary file during acquisition,
and modify/split it later you could open the binary file, retrieve the data in
LabVIEW, and write a small subset to a text file. Alternatively, you could
perform some analysis of the data during acquisition and only save the set of
data that you require post acquisition.
Regards,
Jesse O.
Application Engineering
National Instruments
Jesse O. | National Instruments R&D

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

Convert unix time stamp to readable time with daylight saving

Hello NG,
I have a table that has a column containing time stamps in the unix time format (seconds since 1970). If I show these times to the user, they should be converted to some readable format. I'm using the following sql code as an example:
select to_char(
to_timestamp_tz(
to_char(
to_date('01011970','ddmmyyyy') + 1/24/60/60 * 1086508800,
'YYYY-MM-DD HH24:MI:SS')||' Europe/Warsaw',
'YYYY-MM-DD HH24:MI:SS TZR'),
'YYYY-MM-DD HH24:MI:SS TZH:TZM')
from dual;
The output I get is the following:
TO_CHAR(TO_TIMESTAMP_TZ(TO
2004-06-06 08:00:00 +02:00
The output is right, but the format I need is the following:
2004-06-06 10:00:00
How do I have to alter the statement to get the correct result (add the two hours of the timezone and dst to the time)?
Any help is appreciated.
Regards,
Mario Freimann

That's the strange thin ... this timezone doesn't exist.
Running the query I get the error message
ORA-01882: timezone-region not found
The results of the statement
select * from V$TIMEZONE_NAMES;
for Europe are:
TZNAME TZABBREV
Europe/Dublin LMT
Europe/Dublin DMT
Europe/Dublin IST
Europe/Dublin GMT
Europe/Dublin BST
Europe/Istanbul LMT
Europe/Istanbul IMT
Europe/Istanbul EET
Europe/Istanbul EEST
Europe/Istanbul TRST
Europe/Istanbul TRT
Europe/Lisbon LMT
Europe/Lisbon WET
Europe/Lisbon WEST
Europe/Lisbon WEMT
Europe/Lisbon CET
Europe/Lisbon CEST
Europe/London LMT
Europe/London GMT
Europe/London BST
Europe/London BDST
Europe/Moscow LMT
Europe/Moscow MMT
Europe/Moscow MST
Europe/Moscow MDST
Europe/Moscow S
Europe/Moscow MSD
Europe/Moscow MSK
Europe/Moscow EET
Europe/Moscow EEST
Europe/Warsaw LMT
Europe/Warsaw WMT
Europe/Warsaw CET
Europe/Warsaw CEST
Europe/Warsaw EET
Possibly something is not right with my installation (Oracle 9.2.0.1.0) ...

Help to read a table with data source and convert time stamp

Hi Gurus,
I have a req and need to write a ABAP prog. As soon as i excute ABAP program it should ask me enter a data source name, then my ABAP prog has excute teh code, in ABAP code i have to read a table with this data source as key, sort time stamp from table and should display the data source and time stamp as output.
As follows:
Enter Data Source Name:
Then user enters : 2lis_11_vahdr
Then out put should be "Data source :" 10-15-2008.
The time stamp format in table is 20,050,126,031,520 (YYYYMMDDhhmmss). I have to display as 05-26-2005. Any help would be apprciated.
Thanks,
Ram

Hi Jayanthi Babu Peruri,
I tried to extract YEAR, MONTH, DAY separately and using
EDIT MASK written it.
Definitely there will be some STANDARD CONVERSION ROUTINE will be there. But no idea about it.
DATA : V_TS      TYPE TIMESTAMP,
       V_TS_T    TYPE CHAR16,
       V_YYYY    TYPE CHAR04,
       V_MM      TYPE CHAR02,
       V_DD      TYPE CHAR02.
START-OF-SELECTION.
GET TIME STAMP FIELD V_TS.
V_TS_T = V_TS.
CONDENSE V_TS_T.
V_YYYY = V_TS_T.
V_MM   = V_TS_T+4(2).
V_DD   = V_TS_T+6(2).
V_TS_T(2) = V_MM.
V_TS_T+2(2) = V_DD.
V_TS_T+4(4) = V_YYYY.
SKIP 10.
WRITE : /10 V_TS," USING EDIT MASK '____-__-________'.
          /10 V_YYYY,
          /10 V_MM,
          /10 V_DD,
          /10 V_TS_T USING EDIT MASK '__-__-__________'.
If you want DATE alone, just declare the length of V_TS_T as 10.
Regards,
R.Nagarajan.
We can -

Is there any way to prevent my Calendar from displaying in GMT time?

I just update my iOS to 8.1.2 on my iPhone 6. It appears in my calendar in GMT time despite the fact that I set my time zone to +7
Why Apple support team never solve this problem. So confusing.

Hi chalit2000,
If you are seeing Calendar events listed in a time zone other than the one the iPhone is currently set for, you may want to check to see if Time Zone Support is enabled. You may find the following article helpful:
iOS: How to adjust Time Zone Support for calendars - Apple Support
Regards,
- Brenden

Mail attachment with time stamp

Hi
My scenario is Proxy to Mail.
On receiver side I am getting the data as an attachment but i want that attachment with time stamp.
How to add time stamp to the attachment in reciever mail adapter.
Regards
Sowmya
Edited by: Sowmya on Aug 28, 2008 12:24 PM

hi sowmya,
The bellow link for MessageTransformBean..
[http://help.sap.com/saphelp_nw70/helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm]
In that ContentDisposition is used to fill the value for Attachment file name..
Its allows the value accordingly "RFC1806" Note..
RFC1806 allows accordingly RFC822 ..
Check RFC822 ..
5. DATE AND TIME SPECIFICATION
Regards,
Prakasu

GMT time stamps interfere with calendar in 8.1.2

Similar Messages

Maybe you are looking for