GN_GENERATE_CHECK and SM_SERVICE_CONTENT_UPDATE background jobs are failing

We recently upgraded our Solution Manager to 7 ehp1. A couple of the background jobs are not able to complete.
Both jobs have the following entry in the job logs
Step 001 started (program RAGS_DSWP_SERV_CONTENT_UPDATE, variant , user ID SOLMAN_ADMIN
No authorization
I'm not sure where to look for the authorization issue. Any advice would be appreciated.
Thanks
Laurie McGinley

we are on SM 7.01 (EHP1) - and we have the same problem:
Jobs GN_GENERATE_CHECK and GN_WORKLIST_GENERATE
both jobs end abnormal with joblog:
Object requested is currently locked by user SOLMAN_BTC
Job cancelled after system exception ERROR_MESSAGE
but the job-start is not corresponding to the entries in table SMCONFIGJOBS
both jobs are startet at 00:01:44 (both !!!)
in table SMCONFIGJOBS the entry are
REPORTNAME         GN_GENERATE_CHECK
REPVARIANT
JOBNAME            GN_GENERATE_CHECK
PRIORITY           50
PERIOD TYPE        DAY
PERIOD INTERVAL    1
START TIME         00:15:00
ISIMMEDIATE
INACTIVE
WORKLOAD           M
COMM2SAP
REPORTNAME         GN_WORKLIST_GENERATE
REPVARIANT
JOBNAME            GN_WORKLIST_GENERATE
PRIORITY           50
PERIOD TYPE        DAY
PERIOD INTERVAL    1
START TIME         00:01:00
ISIMMEDIATE
INACTIVE
WORKLOAD           L
COMM2SAP
any suggestions why the jobstart is not corresponding to the starttime in table SMCONFIGJOBS
what job is scheduling these 2 Jobs GN_GENERATE_CHECK and GN_WORKLIST_GENERATE
which other job maybe responsible for the object lock???

Similar Messages

Background Jobs are failing

Hi Gurus,
Below are the jobs which are being failed in our solution manager system since two weeks with error " Logon of user 'DDAWES' in cleint 100 failed. Found that user got locked due to some auditing reasons and i had changed the background jobs to run with another user however jobs are failing with same errror.
Jobs List:
SM:ACCELERATE DOC USAGE
SM:CSA SESSION REFRESH
SM:DYNAMIC TABU UPDATE
SM:EXEC SERVICES
SM:REFRESH ENTRYSCREEN
SM:RNOTIFUPDATE01
SM:SESSIONS RESET
Unsure about this case why the jobs were failing though we have changed the user.
Any sugegssions would be much appriciable
Thanks & Regards,
Vinod

Both users are having same authorizations and both are dailog users only. It looks weird when i changed the user in job step for released jobs, it got changed and updated the job step with new use at that moment. However the jobs are faling and when i go through the job logs there I could see that OLd user name in job step.
Changed the released jobs many times to run with another user, however the jobs are failing with error " Logon of user DDAWES in client 100 failed when starting a step".
Please note the jobs were running fine before the user locked out due to auditing. Also please let me know how do i check the E2E changes ? in SDM ? is ther any transaction code that i can check?
Please suggest...
Thanks & Regards,
Vinod
Edited by: vinod kumar on Jul 6, 2009 5:34 PM

Background Jobs are failing in DEV server after SP upgrade

Hi Everyone,
Below jobs are being failed in dev server after SP upgrade with error variant does not exist.
SWWERRE, SWWDHEX, SWWCOND, SWWCLEAR,SWFSLSDLEX, NON SAP USER UPLOAD
System Details:
SAP Version: ECC 6.0
Database: SQL 2005
OS: Windows 2003, SR2, 64 - bit.
Kernel Patch: 221
SAP_BASIS:19
SAP_ABA :19
SAP_APPL : 16
SAP_AP :17
SAP_HR : 51
SAP_BW : 21
PI_BASIS 2006_1_700 : patch 009
ST_PI: ST_PI 2005_1_700 : 006
FINBASIS : 16
LOSFE: 16
Can any one have idea on above mentioned jobs.
Thanks & Regards,
Vinod

> Below jobs are being failed in dev server after SP upgrade with error variant does not exist.
> SWWERRE, SWWDHEX, SWWCOND, SWWCLEAR,SWFSLSDLEX,
Those are workflow related jobs.
> NON SAP USER UPLOAD
This is a job name and not the program name.
Markus

Reg:Background jobs are failing with out logs

Hi Team,
When i ran sm65 transaction in production i got the output.
Test: Database table consistency test
     ==> Inconsistent step no. for following job(s):
         ACS_SAP_HR                      14525701
         ACS_SAP_HR                      14525702
         ACS_SAP_HR                      14525801
         AUTO_SESSION_MANAGER            22091204
         AUTO_SESSION_MANAGER            22091301
         AUTO_SESSION_MANAGER            22132501
         EU_PUT                          19060603
         EU_REORG                        18180604
         OPEN_ENROLLMENT_SEND_EMAIL      15145305
         OPEN_ENROLLMENT_SEND_EMAIL      18301801
         RPTIME00                        22000822
         RSUVM008                        14330102
         SEND_INET_EMAIL                 08082001
Can you please let me know how to proceed further.
Thanks & Regards,
Deve

check this might help you
http://mailman.mit.edu/pipermail/sap-wug/2005-July/018391.html
Note 581692 - Apparently inconsistent job data - incorrect stepcount
Note 1272015 - Jobs with empty job names or job count
Note 37104 - Error analysis: Background processing system
Edited by: Bhudev on May 22, 2009 6:22 AM

Jobs are failing and give dump "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY"

Hi ,
Jobs are failing and giving dump "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY " and TSV_TNEW_PAGE_ALLOC_FAILED.
Here are the logs:
===================================================================
15.04.2009 07:11:35 Job started                                                                                00           516          S
15.04.2009 07:11:35 Step 001 started (program ZAPO_REALIGNMENT_MPOS_PA, variant AP_AP_REALG_S1, user ID aaa_bbb_apo)      00           550          S
15.04.2009 07:12:52 ABAP/4 processor: TSV_TNEW_BLOCKS_NO_ROLL_MEMORY                                                      00           671          A
15.04.2009 07:12:52 Job cancelled                                                                                00           518          A
===================================================================
Job log overview for job:    BIREQU_4DHSSKZ38YF3KALR4ZBRCDNQT / 00382400
Date       Time     Message text                                                                     Message class Message no. Message type
15.04.2009 00:38:24 Job started                                                                           00           516          S
15.04.2009 00:38:24 Step 001 started (program SBIE0001, variant &0000000024435, user ID aaa_bbb_APO)      00           550          S
15.04.2009 00:38:24 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)              R3           413          S
15.04.2009 00:38:24 DATASOURCE = 9AZAP_AM                                                                 R3           299          S
15.04.2009 00:38:24 *************************************************************************             R8           048          S
15.04.2009 00:38:24 *          Current Values for Selected Profile Parameters               *             R8           049          S
15.04.2009 00:38:24 *************************************************************************             R8           048          S
15.04.2009 00:38:24 * abap/heap_area_nondia......... 2000683008                              *            R8           050          S
15.04.2009 00:38:24 * abap/heap_area_total.......... 2000683008                              *            R8           050          S
15.04.2009 00:38:24 * abap/heaplimit................ 100894464                               *            R8           050          S
15.04.2009 00:38:24 * zcsa/installed_languages...... ED                                      *            R8           050          S
15.04.2009 00:38:24 * zcsa/system_language.......... E                                       *            R8           050          S
15.04.2009 00:38:24 * ztta/max_memreq_MB............ 256                                     *            R8           050          S
15.04.2009 00:38:24 * ztta/roll_area................ 100000000                               *            R8           050          S
15.04.2009 00:38:24 * ztta/roll_extension........... 8000683008                              *            R8           050          S
15.04.2009 00:38:24 *************************************************************************             R8           048          S
15.04.2009 00:38:54 ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED                                          00           671          A
15.04.2009 00:38:54 Job cancelled                                                                         00           518          A
=================================================================
Please suggest

Hi,
Here are the details as follows:
ORACLE
10.2.0.2.0
=====
HP-UX
9000/800
====
Kernel release    700
Compilation       HP-UX B.11
Sup.Pkg lvl.      108
ABAP Load         1563
CUA load          29
=============
SCM 5.00
SAP_BASIS     700     0011     SAPKB70011
SAP_ABA     700     0011     SAPKA70011
ST-PI     2005_1_700     0003     SAPKITLQI3
PI_BASIS     2005_1_700     0011     SAPKIPYJ7B
SAP_BW     700     0012     SAPKW70012
LCAPPS     2005_700     0004     SAPKIBHD04
SAP_AP     700     0008     SAPKNA7008
EA-IPPE     400     0007     SAPKGPID07
SCM     500     0008     SAPKY50008
SCM_BASIS     500     0008     SAPK-50008INSCMBASIS
QIE     200     0004     SAPK-20004INQIE
BI_CONT     703     0005     SAPKIBIIP5
ST-A/PI     01I_SCM500     0000          -
VIRSANH     530_700     0005     SAPK-53305INVIRSANH
========================
Thanks,
VK

SM:SELFDIAGNOSIS background job getting failed in Solution manager

Hi All,
SM:SELFDIAGNOSIS background job getting failed in Solution manger server :
Job Log:
2-22-2012 16:44:02 Job started                                                                                00           516          S
2-22-2012 16:44:02 Step 001 started (program RDSWP_SELF_DIAGNOSIS, variant &0000000000324, user ID BASISUSER)      00           550          S
2-22-2012 16:45:07 Internal session terminated with a runtime error (see ST22)                                     00           671          A
2-22-2012 16:45:07 Job cancelled                                                                                00           518          A
ST22: Dump:
Runtime Errors         ITAB_DUPLICATE_KEY
Date and Time          02-22-2012 16:45:07
Short text
A row with the same key already exists.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_DSWP_SD_DIAGNOSE_CONSISTENTCP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An entry was to be entered into the table
"\CLASS=CL_DSWP_SD_DIAGNOSE_CONSISTENT\METHOD=CHECK_USERS_BP\DATA=LT_USCP"
(which should have
had a unique table key (UNIQUE KEY)).
However, there already existed a line with an identical key.
The insert-operation could have ocurred as a result of an INSERT- or
MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
initial lines into a table with a unique key.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ITAB_DUPLICATE_KEY" " "
"CL_DSWP_SD_DIAGNOSE_CONSISTENTCP" or "CL_DSWP_SD_DIAGNOSE_CONSISTENTCM00M"
"CHECK_USERS_BP"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
KIndly Suggest to resolve the above issue
Thanks
Nekkalapu

HI,
Deatils:
SAP EHP 1 for SAP Solution Manager 7.0
SAP_ABA                701          0006    SAPKA70106
SAP_BASIS              701          0006    SAPKB70106
PI_BASIS               701          0006    SAPK-70106INPIBASI
ST-PI                  2008_1_700   0002    SAPKITLRD2
CRMUIF                 500          0004    SAPK-50004INCRMUIF
SAP_BW                 701          0006    SAPKW70106
SAP_AP                 700          0019    SAPKNA7019
BBPCRM                 500          0016    SAPKU50016
BI_CONT                704          0007    SAPK-70407INBICONT
CPRXRPM                400          0016    SAPK-40016INCPRXRP
ST                     400          0024    SAPKITL434
ST-A/PI                01M_CRM570   0000         -
ST-ICO                 150_700      0009    SAPK-15079INSTPL
ST-SER                 701_2010_1   0002    SAPKITLOS2
Thanks
Nekkalapu

Background jobs are scheduled in future date

Hi
A system which is used by a customer test system was installed and scheduled the jobs in 2010( in future date).
Now we have changed the date to current date. But still all the background jobs are in future date.
There are around 500 jobs are scheduled. And it not possible to reschedule one by one.
Is there any way workaround to change it back to current date format.
Best Regards,
Jai

Dear Jai,
The jobs scheduler should have this dates changed to current. If its a third party system which are running these batches, then be careful to convey the same message to the 3rd party.
If its in SAP, then the schedule change date should execute your jobs. At the same time, ensure that the transports between the test systems match to the destination.
Do let me know for any clarification.
Thanks
Madhu

Maintanence plan jobs are failing

Dear All,
We are facing problems with maintenance plan jobs in SQL server 2012. All jobs are failing with Following error
Executed as user: Testdbserver\SQLadmuser. Microsoft (R) SQL Server Execute Package Utility Version 11.0.3431.0
for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 2:35:25 PM
Could not load package "\Maintenance Plans\Db_Backup" because of error 0x80070005.
Description: Access is denied. Source: Started: 2:35:25 PM Finished: 2:35:26 PM Elapsed: 0.094 seconds.
The package could not be loaded. The step failed.
Server details are: windows 2008 server with sql server 2012 ENT with core based licence. And SQL server , agent services are running with user 'SQLadmuser' (Nonadmin windows user). SQLadmuser is
having sysadmin server roleand in windows its nonadmin userid.
SQL Server maintenance jobs are running under sql server agent service account(by default) but jobs are failing. So After that i have created
credentials with proxy account and i have run those jobs with proxy account, all jobs are executing well with proxy.
or If iam changing SQL server, agent service accounts from SQLadmuser to
local system the maintenance jobs are working perfect.
I have cross verified all permissions and assigned SQLadmuser previlizes to the folders,root folders and regisries but still jobs are failing .
Note: I have observed that some of SQL server related groups are not displaying in local groups and iam unable to find tose groups. one below are reflecting.
1. Is there any relation with this sql groups to run the jobs?
2. Why this jobs are not working with sql server agent service account?
3. Does this create problems to whole SQL server instance in future?
4. Running jobs with proxy account will be having any impact on server?
Could you please help me to trouble shoot the maintenance jobs, Also sharing screenshots for reference.
Thanks in advance,
Nagesh
Nagesh

Hi Nagesh,
For many of the maintenance plans which require access to file system you might have to give access for the SQL Server Agent account directly to those folders. Otherwise your SQL Agent wont have access to the file system. This is why your maintenance plan
jobs like backups are failing.
Now the best way of dealing with this issue is what you have done. Using proxy accounts. By using proxy accounts you are not giving any additional privileges to your SQL Agent account. There is no issue for using proxy accounts for SSIS packages or Maintenance
plans where you need access outside of SQL. Infact proxy accounts are introduced for this purpose, so that Agent account can impersonate the credentials in the proxy and run the job in its security context.
The reason why the jobs are successfull when you change your SQL Agent account to local system is that Local System account has access to the local file system.
http://technet.microsoft.com/en-us/library/ms189064(v=sql.105).aspx
HTH
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Some jobs are failing due to listener.

Hi all,
Only some jobs are failing ,and remaining jobs succeeded.I checked the listener, it was up only.(10.2.0.2 on linux)
the reason for failing jobs showed is
ORA-12541: TNS:no listener
Can you please tell what is the reason for this
Thanks in advance,
Prashant

Some of the failing jobs could be referencing a db link and you need to verify the tns alias being used in the database links
Use tnsping <tnsalias> to verify the connect string

Background job getting failed every day

Hi,
This background job getting failed every day.But this job was running fine initial periord.Please help me out this issue.
SAP_REORG_UPDATERECORDS
SAP_WP_CACHE_RELOAD_FULL
SLCA_LCK_SYNCHOWNERS
Regards
Naanas.

If this is R/3, then none of the above jobs should exist in the system, if scheduled by default with other standard jobs, then these should be removed
Note 1034532 - Changes for standard jobs
Note 931436 - SLCA_LCK_SYNCHOWNERS standard job terminates

I'm using Mountain Lion, kernel_task and other background service are using an awful lot of my memory my memory.

I'm using Mountain Lion, kernel_task and other background service are using an awful lot of my memory my memory. I can't run any other programs without the beach ball I can hear the hard drive running like crazy in the background.I have 8GB of memory and everything has worked well until recently.
I am sort of new at posting let me know what other info I can provide
Thank you
Howard

I was noticing the same today. I have been running this on my Mac Pro circa early 2008. At the time I notice some sluggish I had three items using over 5 GB of real memory. kernal_task, iTunes, and Safari. I did a formal "quit" for iTunes & Safari which reduced the memory down (iTunes was 1.3GB and Safari was 2.0GB). Here is a screen capture of what is right now. The kernel_task is at 2.01GB.
At time of this screen capture my uptime has been:
up 4 days, 23:37, 2 users, load averages: 1.56 1.70 2.04
The specs of the Mac Pro is with a lot of hard drive space on the boot drive (50% free) which is mostly my main account user data. Applications files and other data is actually on a second drive which is also at 50%. Drive 3 & Drive 4 are RAID 0 used for Time Machine. RAM is 32GB as the picture denotes.
I have a MacBook Pro (circa 2011), iMac 27" i7 (circa 2009), and Mac Mini (circa 2010) which don't have any large kernal memory usage.
Thank you in advance...

SAP GRC AC 5.3 RAR Background jobs are cancelled

Hi Experts,
we have newly implemented theS AP GRC AC 5.3 RAR Help me in troubleshooting the Background jobs cancellation in SAP GRC AC5.3 RAR.. we have reported this issue to customersupport they asked us to upgrade the front end patch level to Sp15, even we upgraded still i have the same problem.. later we upgraded the backend patch according to the SAP Note. still the problem is not resolved.
Latest recommendation they are asking us to uninstall the SMD agent.. and also my java control.exe is showing yellow color
help me how to resolve the issue.??
Edited by: n.s.k mohan on May 10, 2011 6:21 AM

Hi,
Could you please first change RAR log settings to Java logger then take a restart of the system. After that log for your background will start coming in RAR. Then schedule the job if it fails then paste background job log here.
Also, in future, please raise GRC related issue in GRC forum so that you can get more replies.
Thanks
Sunny

SQL Server 2008 R2 Backup jobs are failing

I have a problem with SQL Server 2008 R2. First the management studio package is failing to load. backup jobs on that server are failing to run. The server won't accept any installation. The Installation of .Net Framework failed, the Installation of SQL
server 2008 R2 SP2 also failed, Trying to repair SQL Server through the CD also failed. Actually the server cannot install anything on it. When you try to initiate the installation it comes back and say check online for solution or close the program.
I am desperate here as I cannot backup

When you try to initiate the installation it comes back and say check online for solution or close the program.
Are you sure this is the error, I updated SP2 last week and I got the same message but if I remember correctly there was a continue button as well. Could you post the errors.
SP2 not installing, .net framework not installing, ssms not loading up and backups not running all could be due to different issues. Consider these as different and post error message that you are receiving for the issue which is most important for you.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

V3 Collector Jobs are failing

Hi All,
We have newly insatlled Purchasing LIS (02) dataflow. We have enhanced 2LIS_02_ITM datasource. We are able to fill the setup tables and perform the INIT load.
But the V3 extractor job is failing. The ABAP dump says - SY-SUBRC = 2. Changes made to structures..
Please let me know your views.
Regards and Thamks,
Vivek Das Gupta

Hi,
Is there is another system with the same client and if the data source if you have already done some activity on that client.
the error could be because you did the changes to data source when there was some delta records present for that data source.
try delete the existing delta queue and the any entries from LBWQ for this data source and and from all the clients if there are any.
then do a reinit and start the delta again.
hope it helps.
Ajeet

All crawl jobs are failing with errors, Query server not responding.

Hi All,
I'm facing issue with search service , one of the Query server not responding and all the crawl jobs are throwing errors.
Errors:
"The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site )"
"The object was not found. ( Error from SharePoint site: HttpStatusCode NotFound The request failed with HTTP status 404: Not Found. )"
Please suggest some resolutions.
Pavan

Hi Pavan,
1. First verify as given in this article - https://support.microsoft.com/en-us/kb/2323206?wa=wsignin1.0
2. If not 1 resolves issue then try to disable the anonymous access on the default zone web application(in content source)
3. Also check this article if above two steps does not resolve the issue - http://www.sharepointtechs.com/the-sharepoint-item-being-crawled-returned-an-error-when-requesting-data-from-the-web-service-error-from-sharepoint-site-value-does-not-fall-within-the-expected-range
4. If none of the above works then install this CU update http://support.microsoft.com/kb/2596505 and
then re-run you SP Configuration Wizard and restart your SharePoint Server. But before installing this CU on your SharePoint Server ensure your have the latest backup.
4. If all above does not work then remove
the anonymous access (if enabled) and restore the site collection to a new new site.
Please remember to click 'Mark as Answer' if the reply answers your query or 'Upvote' if it helps you.

GN_GENERATE_CHECK and SM_SERVICE_CONTENT_UPDATE background jobs are failing

Similar Messages

Maybe you are looking for