GNB Max-L do not power USB

Hi folk!
Recently I has problem. My motherboard GNB2 Max-l (BIOS updated to v2.3) do not give power (5V) to modem connected to USB port (modem not have external power supply and power get from USB). After I power on PC USB LED on modem lighting, but operating system (Windows XP Pro) do not see modem. Support modem manufacturer speak that modem could get power before PC power on. I try some set in BIOS but result was without change. And for modem work properly I need disconnect USB cable from modem and after connect one more. I try on other 2 PC and after some set in BIOS all work properly.
Please advise me way for solving problem.
With kind regards yup.

Kingfisher! Thanx for reply.
Motherboard GNB Max-L (MS-6565 v2.3)
Processor Pentntim IV 2.533 GHz FSB 533 MHz
Memore 2 module 256MB Samsung ( no ECC)
VGA Saphire RADEON 9200SE
DiskDrive Maxtor 6Y120L0 Primary Master
CDRW Asus and DVD RW Pioneer at secondary master and slave
external V.92 (Zyxel OMNI DUO) modem conect to COM2
external USB ADSL modem Zyxel OMNI connected to rear USB
PC without overclocking.
With kind regards yup.

Similar Messages

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?

Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

This didn't work for me, so I did a bit of searching and TONS of pages later in google, I found an answer. Here are the steps for people who also were in my situation:
1. Take off bottom case
2. Unplug battery - blurry image here: http://i.ytimg.com/vi/03cC79r5Dx4/0.jpg
3. Press and hold power button for 5 seconds
4. Plug a charger in, and it should start booting up
5. After shutting down again, reconnect the battery and close the case up
6. It works! (hopefully, if you guys had the same situation I did)

MSI GNB MAX and RICOH R5C476II PCI to Cardbus bridge not working! Help

Why my PCMCIA & CARDBUS Card Reader based on RICOH R5C476II Chipset not
working on MSI GNB MAX BOARD (with newer bios 2.3)???
My Card reader is fine and working properly on many ithers motherboards like: ABIT BD7-II based
on Intel 845E Chipset, or ASUS TUSIM, ASUS TUSL, and ASUS PIIIB-F
Why ??
Please help me.

Yes, sure. I'm trying to use all of five PCI slots, and after slot chnge I,m setting Reset Configuration data in BIOS.
result is the same in all Card positions. Card is detected, but not working corectly.
I'm trying to resolve any hardware conflicts by disabling all od internal mothebrord components like IEE1394 Audio, Serial Ata and others - no cahnges, no solutions ....

Has anyone ever experienced the situation where plugging in the USB connector to the charging source (high-power USB port or Apple charger) halfway, then pressing it in firmly, results in the iPad not charging?

Has anyone ever experienced the situation where plugging in the USB connector to the charging source (high-power USB port or Apple charger) halfway, then pressing it in firmly, results in the iPad not charging?

It's highly likely that there is a poor connection in the phone - either a pin in the dock connector or internal wiring harness. No software fixes or "tricks" would work, but I would recommend restoring in iTunes, first using a backup and if needed restore as a new phone.
Otherwise, opening and repairing the phone takes some tech knowledge that can't be relayed here. Apple doesn't repair phones other than replacing batteries (not inconceivable that you have a bad battery), but offers "out-of-warranty" replacement (refurb) phones for $149 (US). 3rd party iPhone repair centers may be able to fix it for less. Google to find them,
Tried soft and hard resets
FYI, there's no such thing as "soft" or "hard" resets in iPhone terminology. There is only one phone reset. You'll see those terms thrown around by technically ignorant posters, but they mean different things to different people and are actually archaic, 1980s PC terms that have nothing to do with iPhones.
See the User Guide, Appendix B.

MP 1,1 had HD failure and does not power SATA since. How to fix?

Hi,
My MP 1,1 had a HD that went bonkers and most likely fried something. The machine will boot a HD from USB but attaching the same HD to an internal bay (SATA 1-4) will not power it. Also, DVD does not seem powered as it will not eject.
Can this be fixed in any other way than changing the PSU? Are there any fuses that can be replaced. Everything but the SATA seems to work.
br,
GN

Yes, measuring the Molex actually shows the correct voltage. So that should mean that the PSU is working.
Is there anyway to fix the (most likely) fried SATA controller?
Also, powering the MP now makes it go into defensive mode with all fans att max...

GNB-MAX-FISR Heat Solution

Thanks to a previous post and some other help, I think I've finally fixed my overheating problem (although MSI has yet to return my call.)
The GNB Max-FISR board defaults the Voltage under the "Frequency/Voltage Control" to 1.75. Apparently the max for the 3.06 Intel chip is 1.5.
Also, I had not applied thermal compound to the chip when attaching the heat sink.
After performing both functions the chip running full out hangs out around 60 degrees C. This information REALLY should be in FAQ!!!

it is a 350W power supply..
The DBraket reports all red in 1,3,4 and a green in 2.. the manual claims that the system will hang there if the memory module is bad or installed improperly..
i can't imagine that the memory is bad, since it's brand spanking new.. and i've seated and reseated them a thousand times..
do I have the wrong memory?
I have DDR266 PC2100.. the manual seems to suggest that it might only support DDR533 or DDR400..
- dc

Bluetooth in GNB-Max FISR

Hello Everyone,
Has anyone in this NG used the onboard bluetooth interface with success?
It's not clear in the MB documentation if the onboard Bluetooth chip is ready to communicate with surrounding Bluetooth devices, or it requires an extra piece of hardware. I installed the Bluetooth software, and configured it, but it still doesn't communicate with my other GNB-Max FISR desktop via Bluetooth.
I'd appreciate it if anyone can post the part/model number for any additional devices to make bluetooth work on this MB.
Thanks!

Quote
Originally posted by Majamer
I didn\'t get this in the box although the motherboard was a GNB-Max FISR. Do you know the part number for this Bluetooth interface?
Hi,
I've got the Bluetooth Extension working in my Computer. I had to order it by mail - it cost me about $25 (which is cheaper than a regular USB dongle). It worked without problems, the antenna even extends the working radius quite a bit. The driver (which you have to download - no disk included!) is a regular WIDCOMM stack. No PAN or headset operation with this driver(yet).
You should be looking for:
MSI MS Bluetooth Transceiving Module for
845E-MAX und 845E-MAX2 Series
Part Number: MS-6968 (6967 is the USB dongle)
The only real problem is that it takes up a slot in the back of the pc and has a strange layout that makes it difficult (at least in my case) to fit it without scratching the board. But I had these problems with the other MSI Brackets as well. Please, MSI, make them thinner!!
Cheers.

MSI GNB Max (MS-6565): insufficient voltage

I have just installed my new GNB Max, and got XP Pro up and running. Upon installing PC Alert 4, I recieved a warning that the +3.3V was actually sub 3V(2.9+V). What effect will this have? And what kind of Variance should I tolerate?
Many thanks.

My GNB Max + Antec true power 430 read 3.33.
Sounds like a power supply not handling the load.
Acceptable tolerance in the PC industry is +-5% (3.135 is therfor the lower limit)

Gnb max make me crazy !! bug report

Please help!
I had before abit bd7II 845e mobo with p4 [email protected] ghz
And audigy2 platinum soundcard and bluetooth dongle. 2*256mb ddr400 ram.
My p4 1.8 ghz worked fine with 1.5v 133mhz@2400mhz in my abit mobo.I work with this computer half year without any problem.
I bought the "new, fast..." msi gnb max with bluetooth,thinking how fast the double ram control,and the onboard bluetooth better than my usb dongle.
My problems:
1.:
when i in bios set up fsb 133mhz then work all,but just 100 mhz : my p4 go 1.8ghz
when i in bios set 160 mhz then ~120 mhz
And once more can i set 178 mhz once not,than go the fsb 133 mhz and my p4 2.4 ghz, but when i restart my system than again work with 100 mhz. This game make me CRAZY!!!!
When i set up in bios the fsb to 133mhz then why not work correctly 133mhz, why 100 mhz?????????????
Thats the stupiest think what i saw in my life!!!
2.:
My audigy2 card what before in my abit mobo work perfect,this mobo once go infrared remote control, once not, i don´t know why!!!!!!!!
3.:Bluetooth once work perfect,once not and i don´t know why !!!!!!!!! (It seems all right but just when i would like send program to my nokia,or activesync with my ipaq the say error with services)
4.: I make test with msi fuzzylogic 4 to overclock my mobo. work great but this program is buggy. When i close than mak acces violation error.
I tried with higher voltage too,but in bios and via fuzzylogic not worked perfect too.
My mobo came from factory with bios 2.2, what i heard little bit buggy,later i flash bios 2.1 and try too.... wothout result.
I need help,i need support!!!!!
I SPEND 240€~240$ for this mobo,
I´M NOT BETA TESTER !!!!!!!!!!!!!!!!!
When msi not solve these problems next week then i give back this mobo to shop,and nomore buy another msi board.
From januar 10 (bios 2.2) msi know this bios buggy and 2 month later no update!!!!!!!
X( X( X( X(

Please help!
I had before abit bd7II 845e mobo with p4 [email protected] ghz
And audigy2 platinum soundcard and bluetooth dongle. 2*256mb ddr400 ram.
My p4 1.8 ghz worked fine with 1.5v 133mhz@2400mhz in my abit mobo.I work with this computer half year without any problem.
I bought the "new, fast..." msi gnb max with bluetooth,thinking how fast the double ram control,and the onboard bluetooth better than my usb dongle.
My problems:
1.:
when i in bios set up fsb 133mhz then work all,but just 100 mhz : my p4 go 1.8ghz
when i in bios set 160 mhz then ~120 mhz
And once more can i set 178 mhz once not,than go the fsb 133 mhz and my p4 2.4 ghz, but when i restart my system than again work with 100 mhz. This game make me CRAZY!!!!
When i set up in bios the fsb to 133mhz then why not work correctly 133mhz, why 100 mhz?????????????
Thats the stupiest think what i saw in my life!!!
2.:
My audigy2 card what before in my abit mobo work perfect,this mobo once go infrared remote control, once not, i don´t know why!!!!!!!!
3.:Bluetooth once work perfect,once not and i don´t know why !!!!!!!!! (It seems all right but just when i would like send program to my nokia,or activesync with my ipaq the say error with services)
4.: I make test with msi fuzzylogic 4 to overclock my mobo. work great but this program is buggy. When i close than mak acces violation error.
I tried with higher voltage too,but in bios and via fuzzylogic not worked perfect too.
My mobo came from factory with bios 2.2, what i heard little bit buggy,later i flash bios 2.1 and try too.... wothout result.
I need help,i need support!!!!!
I SPEND 240€~240$ for this mobo,
I´M NOT BETA TESTER !!!!!!!!!!!!!!!!!
When msi not solve these problems next week then i give back this mobo to shop,and nomore buy another msi board.
From januar 10 (bios 2.2) msi know this bios buggy and 2 month later no update!!!!!!!
X( X( X( X(

RESOLUTION: GNB MAX and Radeon 9700 Crashes

I had various lock-ups, crashes and "Windows detected and recovered from a device failure" error messages with my GNB MAX motherboard and Radeon 9700 and they are now fixed.
I was able to receive a beta version of an upcoming set of drivers from ATI and they did the trick!!
Just wanted to give you all some hope.
Hang in there!

Oops, I spoke too soon. I think FastWrites is on (I remember turning it off before on previous drivers and noticing a big slow down that is not present now) but there isn't a SmartGart tab appearing in my ATI control panel any more. I checked Advanced - Options - Details and yes, 8X is on.
How can I verify that FastWrites is on without the SmartGart tab?

8800 does not power on but shows the charging symbol! HELP!

Hello everyone,
I have been searching for days now across the web for a solution to a very bugging situation. A'las i am close to giving up. someone please try and help. So here is the problem: I recently bought a 8800 rim (branded for cingular/AT&T but UNLOCKED) from ebay powerseller with 100% rep. it was advertised in MINt condition.
It arrived two days later and seemed in great physical condition.
So i plug in the charger and let it charge for more than 8 hours. I try turning it on but to no avail. During the charge the screen goes dimly on and shows a battery with an electric bolt going through (I assume that means charging..).
It initially seemed to me as a battery problem. So i took it to a local store and borrowed one of their batteries for 8800 and the phone started working fine also made a call with my temporary T-mobile sim inserted. (although their battery was also on low charge)---
So i come home and with a new OEM 8800 battery. plugged it in and charged for like 4 hours and the screen goes on with the charging symbol but does not power on.
I have repeatedly searched through the WWW and came across wide variety of dilemmas but none were any helpful. I also tried installing the latest OS...which also spectacularly failed [got an error that ...loading failed during the mult-load seesion...or something like that. I followed several very well written guides [advising that the manager and OS be installed on PC and etc.].
SO I MAKE A DESPERATE REQUEST FOR HELP FROM ANYONE OUT THERE WHO CAN HELP. WHAT'S THE DIAGNOSIS WITH THIS BB. IT WAS ABLE TO WORK WITH THE BORROWED BATTERY FROM A LOCAL STORE..EVEN MADE A CALL AND EVERYTHING...BUT WITH THE BATTERY THAT CAME WITH THE eBay PURCHASE AND THE THE BRAND NEW THAT I BOUGHT....IT DOES NOT POWER ON.
BESIDES HOW LONG SHOULD I BE CHARGING IF IT IS NEW OR IF THE PHONE HAS NOT BEEN IN USE FROM SOME TIME??
THANKS IN ADVANCE.
Please help ASAP.
Mirza

How are you charging the BlackBerry? Do you have a wall charger or are you charging via USB cable from your PC? Its also possible that the charging circut in your BlackBerry is faulty. This would explain why a charged battery works while your uncharged battery is not.

Memory on GNB MAX

Hi there, i have a queestion about memory type for the GNB MAX, in the specifications it says that the type of memory should be 2100 (266), but can i use another newer? for example one memory at 2700? i know that maybe the performance is not the same.. but it is possible to use it?
Thanks in advance

I belive it would work, but the speed would be set lower asuming you havent touched somthing in BIOS. If its on 'by SPD' in BIOS that is.
To run it any faster, you have to overclock youre CPU. Read some about it here in the Forum:https://forum-en.msi.com/index.php?board=27.0

Need Help HP DM3 (DM3-1130us) Laptop will not power on. No power at all except for light on a/c jack

Hello, I need some help.
I have a HP DM3-1130us Laptop that will not power on at all.
the only thing that happens when I plug it in is the power jack lights up.
When the power button is used absolutely nothing happens.
No power, no fans, no leds, no on/off cycles, no beebs, absolutely nothing
just the light by the power jack that says the cord is plugged in.
The laptop has Windows 7, 320gb hdd, 4gb ram.
I have tried new power adapter and still nothing.
I have taken the battery out and tried and nothing.
I've tried the option where you take the battery out and hold the power and nothing.
I have tried with different hard drive and no hard drive and nothing.
I have tried reseating the ram and tried new ram modules still nothing.
So I am kind of stumped on what to do, the laptop will just not turn on.
Its not under warranty anymore so cant send it off.
It has not been exposed to any elements(extreme heat or water).
and its never been dropped or anthing.
Im kind of wondering maybe the power button board its self is bad?
If feels fine, its not loose or anything but could it
have just stopped working? for those who are not familiar with this model.
the power button is on the side and is a kind of drag and release button.
Its also on the same board with the Wifi button and 2 Usb ports.
But Im wondering before I buy a new one if this is what it could be.
Or could the motherboard its self be bad?
But even if the motherboard is bad would it still power up
just not post?
Also does anyone know of any other way to try to power this laptop up
without using the slide button. I mean kind of like off a Dv6000 you can power the laptop on by using the Quicklaunch buttons on top but this laptop does not have those.
If anyone can provide any information I would appreciate it.
Thank you.

Hey Tyler,
Unfortunately it is difficult to troubleshoot this type of issue. The majority of the time when the computer wont power on with the same symptoms you described, the power supply board is faulty. Most of the time if the motherboard is bad it should at least turn on or so some signs of life. Like I said, this is most of the time. Sometimes it could do exactly what your experiencing. I would suspect the power supply board has failed since you are not receiving any sort of lights, sounds, etc.
You could check the motherboard for swollen capacitors or loose solder joints but sometimes you wont be able to find anything.
I hope this helps answers your questions,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

GNB Max-L do not power USB

Similar Messages

Maybe you are looking for