GNB MAX very hot !!!!

Always my temps have been very high (IDLE:CPU 54Cº,System 41Cº. FULL LOAD: CPU 72Cº, System 48Cº) but the computer have been working very stable always.
I´ve two fans in the case, and the fans in the cpu and in northbridge chipset works fine. When I turn on the computer, quickly I go to the bios and the cpu temp is 45C and It starts to increase. So I think that the temps are wrong and I think that is a bios problem, but the only bios update for my GNBMAX is beta (v2.42b) so I don´t know what can I do.
Any ideas?

I agree ;-))But Keep an eye on it, as you dont want to get too complacent, because you are used to seeing a high number, If 72C is the Norm at Max CPU Utilization, then you know that when you see 78-80C that something is Wrong, but for now get your Temps Idle and Max, and Look at these temps as Normal for Now , But like I said just because the Temp Sensor is Off, Does NOT mean that it is Not Measuring Temps. Make sure that you Watch it for any Craziness, either Up or Down ...And once the New BIOS Rev. Come Available I would Jump on it....And did you Put Your Finger-Hand on the CPU heatsink?...How about the System itself? you said that the sys. temp. is being reported as 41C, why dont you get one off those $9 US For the Regular 1 Probe Thermometer to $19.99US For the Fancy Model, And install it in your PC Case (For Peace of Mind and Cheap) I also saw one for $6 US that has Velcro and you put the tiny wire probe into your Case (As it will fit through a screw hole or seam because it's that slim) and you stic it to the Side, or Front of your Case, and you will Know your system, motherboard (Or tape the Probe to the NB Heasink) and you wont have to worry about Burning up your CPU..............Sean REILLY

Similar Messages

Very high temp. with GNB MAX

Hello, i have a problem with my MSI GNB MAX motherboard and my p4 3,06 ghz
My cpu temperatures are very high, with a maximum of 85/86c,,, is this normal??
Anyone else having a similar problem like this?
MSI GNB MAX (ms-6565) motherboard
P4 3,06 ghz processor with standaard p4 cooler
1024 mb DDR 266 mhz (dual) memory
Geforce 4 mx videocard
60Gb Maxtor ATA133 HD
Promedium Mars case with a total of 6 fans
(not overclocked)

If Vcor is 1.4 (I'm running 1.525 but reads 1.47 in PCAlert), AND fsb is set for 134, AND your HSF is running AND has good contact, there is no way for it to be that hot. The stock HSF is a pretty good part. I would suggest getting a temperature probe and touching it to the base edge of the HSF to see if you are really that hot. In Bios, I have the cut off threshold at 65C and alarm at 63C. I dont know the exact conversion but 86C is near hot enough to boil water. The laquer from the chip would probably begin to melt and create an odor.

In my macbook pro 15 inch mid 2012 model, my cpu and gpu will get very hot, when gaming or rendering sometimes over 200F. The fans only spin at max about 2900 rpm, when their max is 6400. I downloaded a fan control app, but how can i fix it?

In my macbook pro 15 inch mid 2012 model, my cpu and gpu will get very hot, when gaming or rendering sometimes over 200F. The fans only spin at max about 2900 rpm, when their max is 6400. I downloaded a fan control app, but how can i fix it?

Hi rhaughan,
I see that you have concerns about your operating temperature of your computer while using resource-heavy applications such as gaming applications. I have an article that will address some of the concerns you have mentioned:
Mac notebooks: Operating temperature - Apple Support
http://support.apple.com/en-is/HT201640
While there are third-party utilities that measure the temperature of a notebook computer, it is important to understand that these utilities are not measuring the external case temperature. The actual case temperature is much lower. Never use third-party applications to diagnose possible hardware issues—instead, contact Apple or go to an Apple Retail Store or Apple Authorized Service Provider.
You should also see this article for even further information about your fans:
Learn about the fans in your Mac - Apple Support
http://support.apple.com/en-is/HT202179
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Windows 8.1 HP AMD laptop gets very hot and brightness wont change from max

Hi i recently bought a laptop off my friend because my computer was very hard to read and i needed something smaller, it is only a year old and has a AMD A10 processor. Yesterday we recently tried to factory reset it and reinstall back to windows 8.1 to wipe data, we had a bit of a problem and it took a few hours due to the blue screen problem but i finally got it to boot, after installing windows i have noticed there was barely any programs on the computer except for internet explorer, i also noticed the brightness was on maximum and would not change from there i press the buttons adn the slider will go down but it wont actually change, this makes it very uncomfortable for eyes to read at night or in a dark room. i am also noticing that on the left hand side near the fan the laptop gets very very hot much hotter than my old intel i5 hp laptop, could you please help with these issues ASAP as it is driving me crazy and he wont even take the laptop back until i can fix the overheating and brightness issues. thanks very much

i believe the model number is 15-n268sa

GNB Max temps and worries

Okies, I have a question / problem... maybe?
My MB, after being turned off for 30 minutes, on bootup, going DIRECTLY into the Bios, shows, under PC Health, a temp of 51C and climbs to 57..varying to..58.
Now I have the 3.06 GHZ Intel chip.
(No, I really don't care about anyone else's temp if they are overclocking or using something like a 2.4)
No overclocking anything.
Bios 2.2 and I did as Asaaf suggested and changed the thingys to 134 and 1.525.
I have an Alpha PAL8942 - which is supposed to be a decent heatsink on the P4.
IS THIS NORMAL / USUAL or not? If not, then should I take the sink off and re-apply the Artic Silver and try for "better"?
Oh, and MB temp is at 41C. - But I didn't mess with tha because the fan came on the MB attached.
Thank you in advance for your response.

Quote
Originally posted by scorpes
I have a p4 3,06 ghz with standaard P4 cooler and GNB MAX with a total of 6 fans and my normal cpu temp is: 54c and system temp is 35c, and mine cpufan speed is around 3700 rpm (says pcalert)
but if i play a game such as unreal 2003, my cpu is getting very hot: between 80c/85c and my vcore is 1,4
AND MSI SAYS IT'S NORMAL THAT THE TEMPERATURE IS THIS HIGH?
(http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=13840&boardid=10&styleid=1)
MSI GNB MAX (ms-6565) motherboard
P4 3,06 ghz processor with standaard p4 cooler
1024 mb DDR 266 mhz (dual) memory
Geforce 4 mx videocard
60Gb Maxtor ATA133 HD
Promedium Mars case with a total of 6 fans
I have had the same problems. The cpu temperature was about 52c when the using was idle.
When the using was more then 80% the temperature was rising in some secons over the 75c.,after replace the cooler there where no more problems. He was not realy good placed on the cpu
Now the temperature is between 46c and 52c.
MSI GNB MAX (ms-6565) motherboard
P4 3,06 ghz processor with standaard p4 cooler
2x512 mb DDR 266 mhz (dual) memory
MSIGeforce 4 ti4800SE
80Gb Maxtor ATA133 HD
60Gb Seagate Baracuda ATA100

T 420s cooling air coming out is very hot, finger print reader problem

I am living in ruwais, abudhabi.i bought T 420s in last June from LENOVO authorized distributor. Model number is 4174-KK4 and the sr no ***.
Sometime the cooling air coming out is very hot, unable to keep the laptop on the lap.
The cooling fan also replaced still the temperature is high.
After replacing the fan I noticed that I noticed one of the screws was not fixed, I asked them to fix it, then they fixed it.
I traveled back to my home 240 KM from the authorized distributor service center. when I started the laptop, the fingerprint reader was not working . Then I traveled back 240 KM to the authorized distributor service center to fix the issue. They fixed the fingerprint reader problem.
Then now the SD card reader is not working. I was asked to bring the laptop to the authorized distributor service centre.
Can any one experience the same type of problems with T 420s the cooling air coming out is very hot, finger print reader problem, card reader not working?
The authorized distributor says for the service they can only cover 50 KM form the authorized distributor service center to the customer point, what is the conditions for the On site warranty ?. I am living 240 KM away from the authorized distributor service center from whom I bought the laptop.
Moderator comment: Serial number(s) removed to protect member from mischief.

Well clearly after the first incident. You need to check and us it verifying everything is working before leaving the service center or town its in. Go to a coffee shop and spend time using it and test each option is working.
When the notebook its opened the finger print reader, card reader etc may not be connect properly or connectors not snap fully and disconnect. Mouse ultranav I have heard may also. But clearly you assume too much and you need to spend the time testing its working before leaving.
These service center are only paid a fixed amount so they won't spend anymore time then they have to and address one problem you brought it in for.
As for heat out put and over heating. There are many threads on these systems you can find and read about.
Advice:
- install Core Temp, this will monitor and display on the task bar you CPU core temp and you can see CPU load & Temperature at a glance if it approaching or staying near the max levels which will kill the CPU and/or motherboard due to cooking it. Its free just be sure to deselect any additional software from installing during the process. I use it on my notebooks. If the system is running high core Temp all the time you need to have it resolved or it will die and most likely out of warranty and/or your data will be lost if you don't have a backup as well. http://www.alcpu.com/CoreTemp/
- use a laptop cooler. Its a flat pad you sit the laptop on you lap or table with usually two cooling fans that plug into the USB port for power. It will help cool the base of the laptop and other components inside will not be as hot. This will do nothing for the CPU temperature though.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Play Simcity 2000 in boxer, MBP become very hot

Hi mac people,
last time downloaded boxer and simcity 2000 cd collection, i never change any setting and the game setting leave it as default, but then my mac become very hot near the charging part( like super hot!!!), so I go setting and have check, the cpu speed is tuned at max, and my mac activity monitor showed 8 core is running almost at max!!!!(I only opening this app!),
Does everyone know how to change the setting for boxer and simcity 2000?
Because of this, my mac logic board is burn and change one in the warranty period because of this(BUT THE TRUE IS, I changed totally three logic board near the end of the warranty period!! make me buy a apple care which cost me to spend more hard earn money!)
Does you all have the same problem, or only me?

Use a Windows 3D gaming tower to play games, it's why they mod them with elaborate cooling.
Windows operating system versions get a decade of support on average, you can open them up and clean the dust out and you can upgrade the video card.
The Mac strikes out in all three, you only killing the expensive Mac prematurely.
3D gaming on Mac's, what you need to know

MBP very hot and now battery is fried ?

To all the MBP experts out there......maybe you can help ?
1. My MBP (46 months old) has been running VERY hot........that is, if you use it while putting it on your lap (bare skin contact), you'll get burned after a short while.
2. My battery (only 1 year old, 170 cycles) is dying, and the MBP switches itself to sleep mode when the charge reaches about 40-50%. From full charge, it only takes about 30 minutes to reach 40-50%.
Here's the tricky one.......Coconut battery could say that max capacity is 55% one day, and 80% another day, and then 35% another day..........what's with the variability ??
Help...........I'm confused.........time to get a new MBP ?

Since your Mac is fairly old, nearly 4 years, it is more then likely clogged with dust in the fan intake and exhaust area.
First thing to do is clean the dust out.
Second thing to do is take it to and Apple Genius Bar or AASP and have it checked for the Bad NVidia Graphic chip as your model is one of these.
MacBook Pro: NVidia Failure
Good Luck.

GNB MAX FISR processor upgrade

I installed a 3.06G P4 to replace the 2.8G chip I originally built it with. Now, control panel shows 2 installed P4 3.06 chips, and the pc blue screens at shutdown, with IRQL_NOT_LESS_OR_EQUAL followed by a bunch of hex data, then it reboots. Have "live updated" everything. Microsoft says it is a graphics driver issue. Running latest NVidia drivers 6693 version. Any ideas out there?

Since I went through the same trouble while upgrading a 2.66 P4 to 3.06HT P4 on Gnb Max, the followings could help.
Most probably your trouble is due to hyperthreading capability of 3.06 P4. Since you have two processors in the control panel, you already have it activated. To verify this, you can go to BIOS and disable hyperthreading. If the problem goes away, the trouble is really due to hyperthreading.
After verfying that hyperthreading is the problem enable it again because it is a very nice thing to have. You can rectify the problem by checking a couple of things.
- First, make sure that the following is true: Device Manager -> Computer -> ACPI Multiprocessor PC. Otherwise you can change it to ACPI Multiprocessor yourself by updating the driver if you go to Properties. Reboot and check if the problem is resolved.
- If the problem is still there, uninstall your graphics driver and switch to Standard VGA, reboot and reinstall the Nvidia driver. If the problem still persists after doing this, you might need to reinstall Windows. But I think the above two things should resolve the problem, I did not need to reinstall Windows on my system.
Good luck
GNB Max FISR
3.06HT P4 -> 3.45HT P4 @ 150 MHz FSB
Kingston Dual Channel 1GB DDR333 -> DDR300 2-3-3-6
ATI Radeon 9700 Pro (4X AGP, Fast Write disabled) -> 380 GPU, 680 Mem
Fortron 350W PSU

Anyone got "GOOD" sound out of GNB-Max 6565?

Hello,
I'm getting a very lousy sound out of my 6565. I tried all options such as with or without the S connector, 2, 4, and 6 channels, all possible inputs, different hardaware acceleration levels, etc.
The sound output is bad, and the microphone doesn't detect anything. I've noticed that many people were having the same problem. Does this mean that this MB requires a special speaker system? Can't I use two speakers like old times and get stereo sound out of them without any software/hardware tweaks?
Thanks for any help?
Maria
MSI GNB Max-FISR 6565-010
CT6472Z265.18T: 1024MB 184-PIN DIMM 64Mx72 DDR PC2100
Intel Pentium 4 Processor 2.5GHz, 400MHz FSB, Socket 478
XTASY Everything
Windows XP Professional
Two legacy speakers

I have the same board but I didn't even try onboard sound. My experience with onboard sound on other boards has made me just start with a good pci sound card (sound blaster audigy). Every onboard sound I have tried either sounded bad or worse. If the board had a creative chip on it you may get medium quality. Don't waste money on new speakers to use with the onboard sound, spend the money on a soundcard. Of coarse if money is not an issue you could buy both.

RESOLUTION: GNB MAX and Radeon 9700 Crashes

I had various lock-ups, crashes and "Windows detected and recovered from a device failure" error messages with my GNB MAX motherboard and Radeon 9700 and they are now fixed.
I was able to receive a beta version of an upcoming set of drivers from ATI and they did the trick!!
Just wanted to give you all some hope.
Hang in there!

Oops, I spoke too soon. I think FastWrites is on (I remember turning it off before on previous drivers and noticing a big slow down that is not present now) but there isn't a SmartGart tab appearing in my ATI control panel any more. I checked Advanced - Options - Details and yes, 8X is on.
How can I verify that FastWrites is on without the SmartGart tab?

White Macbook (mid 2006) Runs loud and very hot, battery not charging

I know my Macbook is getting a bit old now, but I don't think the way it is running is very normal.
The battery will say that it is fully charged, but it will only last about half an hour when disconnected from the charger. The light on the charger will not come on either, or it will blink when i attach it, then stay out.
My Macbook will also run very loudly, and hot. I don't ever run too many programs at once, so I know that it's not a strain on the system from what I can tell.
I tried resetting the SMC since it sounded like the problems I am having would be solved by resetting it.
Are there any known problems such as these, or fixes? Thanks.

Battery Information:
Model Information:
Serial Number: DP-ASMB013-369a-7799
Manufacturer: DP
Device name: ASMB013
Pack Lot Code: 0001
PCB Lot Code: 0000
Firmware Version: 0102
Hardware Revision: 0300
Cell Revision: 0200
Charge Information:
Charge remaining (mAh): 2225
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 2268
Health Information:
Cycle count: 381
Condition: Poor
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 12463
And it's not running very hot right now, I'm doing a quick check on email and such before work. I'll get that info about processes later on today.

Mid-2010 Macbook Pro running very hot

Hi all,
My mid-2010 Macbook pro is running very hot. On average CPU is 61-70 degrees Celsius, sometimes even more. I'm pretty bad at having lots of chrome tabs open and heavy multitasking, but even when I'm not temperature still ends up very high and fan rpm can get to over 6000. Heat seems to be concentrated to the lefthand side of the touchpad (battery area?). I'm running 10.9.3.
Current stats below from iStat pro widget (smcFanControl concurs with these temps), with only the following pic's activity running. Laptop currently balanced on two books (so airflow around the sides) which are in turn on my lap.
I have tried reseting the SMC with the shift-control-option-power method but it doesn't seem to have worked - instructions said to press and hold this, then release, then press power again to boot, but laptop boots up from this combination anyway.
Am I just doing something wrong or will this be an expensive trip to the apple store to fix?

Hey happyhaskins,
If you are having an issue with your MacBook Pro running excessively hot, I would suggest that you troubleshoot using the steps in this article -
Mac notebooks: Operating temperature - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

IPhone 4 battery dies quickly, won't charge properly and is very hot!

Hi, my iPhone 4 won't charge properly and the battery drains really fast plus the handset is very hot. Does it need a new battery?
It just suddenly started happening yesterday before lunch and hasn't been right since! I haven't done any software updates or anything that could cause it. I e tried deleting my mail accounts, turning phone off and re installing them as suggested in one post but that didn't work!
Thanks

Hi emma.s,
You may want to take a look at the Power/Battery section of the following article for more information:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
- Brenden

IPhone 4 very hot and battery draining fast

I am having an issue with my IPhone 4 that just started yesterday. It is VERY hot to the touch the screen and the back of the phone. It is also not maintaing a charge. I charged it all night and just taking it off the charger and not using it till I checked the time one time it was down to around 96%. I talked on it for maybe 5 - 10 minutes and only talked and it was down in the 70's. By the time I picked it up again once in the office to check battery power I noticed it was down in the 50's. I am constantly having to charge it and cannot stand to hold it in my hand due to it being so hot. Any advice or ideas?

There is Most likely a Probem with your battery, I would go to the Apple store to see if it can be fixed or replaced.

GNB MAX very hot !!!!

Similar Messages

Maybe you are looking for