Gnome 3.16 seahorse does not show gpg keys anymore

After upgrading to gnome 3.16 seahorse does not list any gpg keyys anymore.
Not only does it not list the specific keys, the complete gpg section is gone
Anyone else having this problem?

bulletmark wrote:
pezz wrote:It's not unlocking my ssh keys either.
Pezz, I had this problem a couple of days ago (after the update to 3.16) and I found that my SSH_AUTH_SOCK variable was pointing to /tmp/ssh-xxxxxxx/agent.NNN. It should have been pointing to /run/user/1000/keyring/ssh. I then rebooted and have not seen the problem again, i.e. I have rebooted a few times since and SSH_AUTH_SOCK has always been correct. Maybe there is a bug/race condition which does this? Echo $SSH_AUTH_SOCK to check.
I'm experiencing this exact issue, except the problem persists even after several reboots.
Here are some additional (possibly relevant) entries from journalctl:
Apr 14 16:31:23 arche /usr/lib/gdm/gdm-x-session[804]: /etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
Apr 14 16:31:24 arche gnome-keyring-daemon[801]: couldn't register in session: The name org.gnome.SessionManager was not provided by any .service files
Apr 14 16:31:24 arche gnome-session[811]: SSH_AUTH_SOCK=/run/user/10011/keyring/ssh
Apr 14 16:31:24 arche gnome-session[811]: SSH_AUTH_SOCK=/run/user/10011/keyring/ssh
Apr 14 16:31:24 arche gnome-session[811]: SSH_AUTH_SOCK=/run/user/10011/keyring/ssh
Apr 14 16:31:24 arche gnome-session[811]: GPG_AGENT_INFO=/run/user/10011/keyring/gpg:0:1
Apr 14 16:31:24 arche gnome-session[811]: SSH_AUTH_SOCK=/run/user/10011/keyring/ssh
Apr 14 16:31:24 arche gnome-session[811]: GPG_AGENT_INFO=/run/user/10011/keyring/gpg:0:1
Echoing SSH_AUTH_SOCK always shows it equal to "/tmp/ssh-xxxxxxx/agent.NNN".
Has anyone got any idea of what might be going on?

Similar Messages

  • Since updating to Maverick, my screensaver does not show my iPhotos anymore and I can not find how to reset this.

    My screensaver preference was set at showing the last 12 months of iPhotos on my Mountain Lion.  Just updated to Maverick and now it shows "no photos."  Tried to reset, but it does not give me the option to personalize using my iPhotos as an option to do so. I do not want to use what Apple has chosen, but want my pictures.  How do I get this back?

    You need to upgrade to the latest 64 bit Mavericks optimized, compatible version of iPhoto.
    Older versions of iPhoto will no longer work under OS X Mavericks.
    What  will happen is that the new iPhoto library will be updated to work the new version of iPhoto an Mavericks and the updated iPhoto library will no longer be accessible to older versions of iPhoto or older versions of OS X.
    If you want to be able to access the current configuration of your Libary with older version of iPhoto an older versions of OS X, then you need to create a copy of the IPhoto lIbrary and move this copy to another location
    You can save the duplicate iPhoto Library anywhere on your Mac's internal hard drive.
    I created a new folder in my Home folder/directory called My Photos and stored the duplicate iPhoto library there along with other images I didn't want to be in iPhoto.
    As long as the copy of the iPhoto library is made before you let the new version of iPhoto convert it, it will still be intact for older versions of iPhoto and OS X to access at some future date, if needed.

  • How do I remove an old phone number from my macbook imessage. My apple ID does not show the number anymore but I cannot remove it from the imessage accounts. Its driving me mad !

    Can someone please help me to remove an iphone telephone number from my imessage application. I no longer have a phone which I registered on my apple ID as a second phone. I have been on my apple ID and it does not seem to be there but cannot remove it from imessage, which still has it as an option to connect to. I am concerned that someone else who inherite this old phone will see my messages if I accidentally enable it again. I have read and re-read various postings and tried all options given but no luck, the **** thing stays there.....

    Hey Chappers64!
    Here is an article that will help you with this issue:
    iOS: Deactivating iMessage
    http://support.apple.com/kb/ts5185
    If you have already tried these steps, you will want to utilize the information at the end of the article:
    If you can't deactivate iMessage after you perform the steps above or you can't access the iPhone, please contact Apple Support.
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • Registry-based discovery does not show non key property value

    Hi,
    Discovered Inventory shows instances of my new class correctly, but the non key property ServerType appears but has no value. I have confirmed each instance does have the registry value populated. What can I do?
    I see the following Event 31876 on one of the clients:
    Data item returned no information for parameter '$Data/Values/ServerType$'
     This usually indicates that the query is incorrect.
    Detailed Background:
    My custom application is made of 8 different computer roles.
    HKLM\SOFTWARE\Vendor\Appname exists = true indicates an instance of my app.
    HKLM\SOFTWARE\Vendor\Appname\ServerType indicates the actual server role.
    I want an initial hosted class (VendorServer) based on Microsoft.Windows.Computer base class to contain all server roles.
    Then I will create 8 hosted classes (VendorServerRoleA, VendorServerRoleB, etc) for each server role based on the initial hosted class (VendorServer).
    My discovery for VendorServer class created instances, and I see ServerType as a property in Discovered Inventory, but it is blank for all instances.  Should I expect to see ServerType populated where I mapped it as follows:
    Name =
    $MPElement[Name="MPName.VendorServer"]/ServerType$
    Value =
    $Data/Values/ServerType$
    Does $MPElement need to reference the discovery object instead of the class object (which it currently does)?
    I started with a blank MP and then create the new VendorServer class based on Microsoft.Windows.ComputerRole and added the new Property, ServerType as a non key property.
    The discovery targets Microsoft.Windows.Computers.  Is it ok to have the discover target one class and the VendorServer class have a different base class?
    My build event was simply if HKLM\SOFTWARE\Vendor\Appname exists
    I am hesitant to proceed to create my VendorServerRoleA class based on HKLM\SOFTWARE\Vendor\Appname\ServerType=AAA until what I have built so far works completely, unless it is not expected to do so.
    A related question.  Once I have classes for each server role, can I target monitorA at multiple classes, or do I need to create a new monitor for each class?
    This authoring learning curve is so steep as I am sure many of you already know.  MUCH thanks for help...

    <ManagementPack ContentReadable="true" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
      <Manifest>
        <Identity>
          <ID>Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack</ID>
          <Version>1.1.1.1</Version>
        </Identity>
        <Name>Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack</Name>
        <References>
          <Reference Alias="SC">
            <ID>Microsoft.SystemCenter.Library</ID>
            <Version>6.0.6278.0</Version>
            <PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
          </Reference>
          <Reference Alias="Windows">
            <ID>Microsoft.Windows.Library</ID>
            <Version>6.0.6278.0</Version>
            <PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
          </Reference>
          <Reference Alias="Health">
            <ID>System.Health.Library</ID>
            <Version>6.0.6278.0</Version>
            <PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
          </Reference>
          <Reference Alias="System">
            <ID>System.Library</ID>
            <Version>6.0.6278.0</Version>
            <PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
          </Reference>
        </References>
      </Manifest>
      <TypeDefinitions>
        <EntityTypes>
          <ClassTypes>
            <ClassType ID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer" Accessibility="Internal" Abstract="false" Base="Windows!Microsoft.Windows.ComputerRole" Hosted="true" Singleton="false">
              <Property ID="ServerType" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
            </ClassType>
            <ClassType ID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServerCDC" Accessibility="Internal" Abstract="false" Base="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer" Hosted="true"
    Singleton="false" />
          </ClassTypes>
        </EntityTypes>
      </TypeDefinitions>
      <Monitoring>
        <Discoveries>
          <Discovery ID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.DiscoverIFSSubsystemServer" Enabled="true" Target="Windows!Microsoft.Windows.Computer" ConfirmDelivery="false" Remotable="true" Priority="Normal">
            <Category>Discovery</Category>
            <DiscoveryTypes>
              <DiscoveryClass TypeID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer" />
            </DiscoveryTypes>
            <DataSource ID="DS" TypeID="Windows!Microsoft.Windows.FilteredRegistryDiscoveryProvider">
              <ComputerName>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
              <RegistryAttributeDefinitions>
                <RegistryAttributeDefinition>
                  <AttributeName>KeyExists</AttributeName>
                  <Path>SOFTWARE\Thales\IFSBOSystem</Path>
                  <PathType>0</PathType>
                  <AttributeType>0</AttributeType>
                </RegistryAttributeDefinition>
              </RegistryAttributeDefinitions>
              <Frequency>300</Frequency>
              <ClassId>$MPElement[Name="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer"]$</ClassId>
              <InstanceSettings>
                <Settings>
                  <Setting>
                    <Name>$MPElement[Name="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Name>
                    <Value>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
                  </Setting>
                  <Setting>
                    <Name>$MPElement[Name="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer"]/ServerType$</Name>
                    <Value>$Data/Values/ServerType$</Value>
                  </Setting>
                  <Setting>
                    <Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
                    <Value>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
                  </Setting>
                </Settings>
              </InstanceSettings>
              <Expression>
                <SimpleExpression>
                  <ValueExpression>
                    <XPathQuery Type="String">Values/KeyExists</XPathQuery>
                  </ValueExpression>
                  <Operator>Equal</Operator>
                  <ValueExpression>
                    <Value Type="String">true</Value>
                  </ValueExpression>
                </SimpleExpression>
              </Expression>
            </DataSource>
          </Discovery>
          <Discovery ID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.DiscoverIFSSubsystemServerCDC" Enabled="true" Target="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer" ConfirmDelivery="false" Remotable="true"
    Priority="Normal">
            <Category>Discovery</Category>
            <DiscoveryTypes>
              <DiscoveryClass TypeID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServerCDC" />
            </DiscoveryTypes>
            <DataSource ID="DS" TypeID="Windows!Microsoft.Windows.FilteredRegistryDiscoveryProvider">
              <ComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
              <RegistryAttributeDefinitions>
                <RegistryAttributeDefinition>
                  <AttributeName>ServerTypeCDCTrue</AttributeName>
                  <Path>SOFTWARE\Thales\IFSBOSystem\ServerType</Path>
                  <PathType>1</PathType>
                  <AttributeType>1</AttributeType>
                </RegistryAttributeDefinition>
              </RegistryAttributeDefinitions>
              <Frequency>300</Frequency>
              <ClassId>$MPElement[Name="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServerCDC"]$</ClassId>
              <InstanceSettings>
                <Settings>
                  <Setting>
                    <Name>$MPElement[Name="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Name>
                    <Value>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
                  </Setting>
                  <Setting>
                    <Name>$MPElement[Name="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer"]/ServerType$</Name>
                    <Value>$Data/Values/ServerType$</Value>
                  </Setting>
                  <Setting>
                    <Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
                    <Value>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
                  </Setting>
                </Settings>
              </InstanceSettings>
              <Expression>
                <SimpleExpression>
                  <ValueExpression>
                    <XPathQuery Type="String">Values/ServerTypeCDCTrue</XPathQuery>
                  </ValueExpression>
                  <Operator>Equal</Operator>
                  <ValueExpression>
                    <Value Type="String">CDC</Value>
                  </ValueExpression>
                </SimpleExpression>
              </Expression>
            </DataSource>
          </Discovery>
        </Discoveries>
      </Monitoring>
      <LanguagePacks>
        <LanguagePack ID="ENU" IsDefault="true">
          <DisplayStrings>
            <DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack">
              <Name>Thales IFS Subsystem Discovery Monitoring Management Pack</Name>
              <Description>The purpose of this management pack is to monitor the health of various components of the Thales IFS subsystem servers including server types CDC CRD DC MWS PMS and SUP.</Description>
            </DisplayString>
            <DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.DiscoverIFSSubsystemServer">
              <Name>Discover IFS Subsystem Server</Name>
            </DisplayString>
            <DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.DiscoverIFSSubsystemServerCDC">
              <Name>IFS Subsystem CDC Server</Name>
            </DisplayString>
            <DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer">
              <Name>IFS Subsystem Server</Name>
              <Description>CDC CRD DC MWS PMS SUP</Description>
            </DisplayString>
            <DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer" SubElementID="ServerType">
              <Name>ServerType</Name>
              <Description>CDC CRD DC MWS PMS or SUP</Description>
            </DisplayString>
            <DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServerCDC">
              <Name>IFS Subsystem CDC Server</Name>
            </DisplayString>
          </DisplayStrings>
        </LanguagePack>
      </LanguagePacks>
    </ManagementPack>

  • Bridge does not show image previews anymore on one of my drives

    Bridge isn't showing image previews on one of my drives. I have tried resetting the preferences as well as deleting the cache to no avail.

    I don't believe so, because it operates as expected in finder. It's only bridge that doesn't seem to want to create the thumbnails. I went to the thread you posted, Robert, but unfortunately I'm not on Windows and don't see any "online" or "offline" options.
    Transporter is not a cloud service. It's actually a local hardware device, so it's more a network drive than anything else.

  • Kids Account does not show the protokoll anymore - any patch available?

    Hi Everybody - I have created for my daughter a kids account and initially everything worked fine. But since 8 weeks the protokol doesnot record anything any more. The protokol for programs doesn t show anything any more and the visited Web-sites are only shown until end of April (when I did an upgrade). Is there any patch for the Kids Security Program? Any help here is highly appreciated!

    I found a solution to this issue on the Macintouch website. An unknown reader had a couple of suggestions and his/her preferred method worked perfectly. I now have no "guest" login option on the startup screen, just a normal prompt for a user login and password. I hope this helps someone else. And to the unknown Macintouch reader, Take a Bow!
    MacInTouch Reader
    Re:
    After upgrading to 10.7.2, I now have a persistent Guest User on the login screen, despite having disabled Guest User in the login preferences (and rebooted, for good measure). And it appears to allow guest login, despite clearly being disabled in the System Preferences. Anybody know how to get rid of this unwelcome guest? Thanks in advance.
    Two methods:
    My preferred: Click on the Apple, System Preferences, Security & Privacy, Click the Lock to Make Changes, enter your computer administrator username and password, click the checkbox On for "Disable restarting to Safari when screen is locked." Then quit System Preferences.
    Alternate: Click on the Apple, System Preferences, iCloud, Cancel (deleting documents in iCloud), click the checkbox Off for "Find My Mac". Then quit System Preferences. (The reason this is not my preferred is that it turns off the Find My Mac feature, and I like having this feature because it enables me to locate and remote lock/wipe my laptop if sometime steals it.)

  • My Creative Cloud desktop app does not show any information anymore

    It used to list all my apps and give me the option to update when applicable. Now it just shows Help, Open as Window and Quit Creative Cloud

    Hi Roni-
    If you updated the desktop installer and the screen is blank: try this:
    Rename the opm.db file.
    Close the Creative Cloud application if it's running.
    Navigate to the OOBE folder.
    Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE
    Mac OS: /User/<username>/Library/Application Support/Adobe/OOBE folder
    Rename the opm.db file to opm_old.db
    Launch Creative Cloud
    (help finding hidden files on mac:http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html.)

  • Right click on tool does not show additional tools anymore.

    CC Illustrator version 18.1.1 on Mac Pro, Windows 8.1 partition, mac full size keyboard, logitech mouse. All software up to date, reinstalled illustrator, reinstalled mouse hardware and driver. Reset default essentials and tools window several times and turned computer on an off.
    Right click works in other programs, desktop etc...
    literally worked one day and didn't the next.
    I'm petty sure this has to be operator error but, like, how?
    Its a right click…..
    This is how it used to work:
    Step one:
    right click on shape builder tool...
    Step two: (automatic)
    other tool options pop up….
    This is no longer the case.
    If anyone is compelled to say something like… "its left click and drag…." please stop and update the current version of your illustrator to CC 18.1.1
    I have no idea how other versions of illustrator work, but I do know thats not how it works in CC 18.1.1
    I'm not trying to be a smart ***, please don't interoperate this to be anything other than a guy trying to figure out why the most basic of things is not working and I've already had a great many people look at me like I'm an idiot for asking about this problem….

    buitesnek,
    You may try the list which cures strangenesses, especially those that appear after things have been working. Some of the things to try on the list may seem weird, but every one has proved to work in some strange case.
    The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save current artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to at least 5 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
    https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • I have an apple iphone 4 that I want to download audio books from my library onto it.  I cannot figure out how to do that.  The iphone does not show up on my mac laptop as a connected device.  Does this kind of download have to run through itunes?  Thanks

    I have an apple iphone 4 that I want to download audio books from my library onto.  I cannot figure out how to do that.  The iphone does not show up on my mac laptop as a connected device.  Does this kind of download have to run through itunes?  Thanks

    Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

  • How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

    How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
    Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
    After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
    So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
    I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
    I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
    I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
    Are the files lost forever or can i recover them by going to a shop or using a software?

    Thank you for responding.
    This might sound stupid since i'm not really knowledgeable with Macs,
    but since all my files were moved from my mac computer to the external hard drive,
    is it possible to recover those files through my Mac - like recovering deleted files? 

  • Why when using Adobe Bridge,  I apply a star rating,  the rating does not show up in Photoshop Elements? [tags]

    Why when using Adobe Bridge,  I apply a star rating,   the rating does not show up in Photoshop Elements.  I use Elements as my organizer and Bridge to view as it is much more user friendly.  Anyone any solutions??

    Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:

  • Field Explorer in Crystal Reports does not show the same names as Bex Query

    Hi
    I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
    In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
    It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
    I would like it to display the field explorer as shown in this blog.
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    Thanks in advance

    Hi,
    take a look here:
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
    Ingo

  • Adobe Creative Cloud does not show all my apps as registered.

    Adobe Creative Cloud properly shows my Adobe Photoshop CS6 as registered.  However, it does not show my Adobe Acrobat XI Pro, or my Adobe Photoshop Lightroom 4.4 as registered.  How can I get these programs to be properly registerd as "MY APPS" in Adobe Creative Cloud?  I am running Windows 8 and have had photoshop for a number of years. I installed Acrobat XI Pro in December, but it has never been recognized in Adobe Creative Cloud as registered.

    Hey Pete,
    I'm not sure why Acrobat XI is not recognized. It is on my system. Maybe try uninstalling and reinstalling it.
    You can uninstall through the OS
    Control Panel > Programs & Features
    and then reinstall it through the Creative Cloud app or https://creative.adobe.com/products

  • I subscribed to Creative Cloud for teams and LR does not show in AAM.

    I have a licensed copy of LR4.4 installed along with CS6.  Howeveer LR does not show in AAM and cannot be accessed.  Please advise to solution.

    Whaleybird1958 which operating system are you using?  Please make sure you meet or exceed the system requirements listed at http://www.adobe.com/products/photoshop-lightroom/tech-specs.html.

  • Photoshop CC2014 running under window 8.1.  How do I access mini bridge.  It does not show under FILE or WINDOW-EXTENSIONS.  Works ok with CS6

    Photoshop CC2014 running under window 8.1.  How do I access mini bridge.  It does not show under FILE or WINDOW-EXTENSIONS.  Works ok with CS6

    Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG

Maybe you are looking for

  • Creating PDF forms in Preview??

    Do I HAVE to have another application other than Preview (e.g. Adobe Acrobat, or something) to create PDF forms? I'm trying to do a questionnaire-type thing, and so far haven't been successful in creating one. Thanks.

  • I downloaded a song and i tried to listen to it but it will only play the first half of the song and then skip to the next song.

    I downloaded several songs successfully to my ipod nano (5) but this particular song when i tried to listen to it would play for the first half and then skip to the next song in the playlist like the ipod thought the song was over.

  • Help on JVM at Solaris 10.x

    Hi Currently we have Solaris 8.x installed and we have JVM version of 1.3 installed in it. Now we are going to upgraed the OS to Solaris 10.x. I want to know whether we need to upgrade the JVM to accomodate the new OS? Regards Ravi.

  • Web service control manager

    Hi, I have created a Gateway in WebService Control manager. I have registered a service with the gateway. Now when I am testing with test page..it is throwing error "Failed to read WSDL from http://192.168.44.85:8888/TestGateway/services/SID0003002?w

  • Replace or Merge data with iCloud

    Mobile Me provided the facility to replace all data on a device from the data on Mobile Me. I have updated my contacts on my iMac. I let iCloud update my newer Mac Book Air but ended up with duplicates Now I want to update my Mac Book Pro which hasn'