Gnome automatic login + mail-notification paswords

I use gnome automatic login (/etc/gdm/custom.conf AutomaticLoginEnable=true) and I use mail-notification with 3 mailboxes. The mailbox passwords are stored in a keyring. When I start the system, mail-notification asks for keyring password 3 times (to check the 3 mailboxes). I have seahorse installed as well and I enabled the option to open keyring when I log in, but nothing changed.
Is there any solution to avoid entering keyring password for all mailboxes?

You can have the keyring without a password (run seahorse, rightclick the respective keyring, change password).
The question is whether it is wise, especially with automatic login.

Similar Messages

Automatic SMS/Mail notification for local auto-reaction method

Hello!
We would like to be informed via SMS/Mail about the Availability of satellite system.
When we assign a Local auto-reaction method for this MTE (Availability_SysPercent_ABAP) we receive the SMS/Mail notification only in case we manually start the auto reaction method from RZ20.
When we try to assign the central auto reaction method from RZ20 we get the following error:
Assignment for local system only works with nodes from agent segments
What is the procedure for the automatic SMS/Mail notification in case of local auto-reaction method?
Thank you very much!

Dear Team,
As I have understood, you want to be informed each time a satellite system is not up and running ?
Option 01
========
1. Install the CCSMPING agent in SOLMAN
2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
    Create all satelittes systems ...
3. Then, from SOLMAN_WORCENTER, in SYSTEM Monitoring, you have the status of each satellites systems created
    in RZ21 (point 2).
This option will not advised when a satellite system is down. But from one WEB page, you will have the status of all satellites systems.
Option 02
========
1.Install the CCSMPING agent in SOLMAN
2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
    Create all satellites systems.
3. RZ20 - SAP CCMS Monitor Templates - Double-click on "Availability and Performance Overview"
    Open "Availability" - Then, all satellites systems which have been added under point 2 will appear.
4. Select one satelitte system
5. Open "Availability"
6. Select "ABAP: Checked by CCMSPING.<solman-hostname>.00"
7. When selected, click on "Properties" button.
8. Then, you assign here an auto-reaction method - for example :
    "ccms_send_alert_to_alm_ccms_containerv4".
9. Copy this method to Zccms_send_alert_to_alm_ccms_containerv4.
10. In this method, add you email address.
11. Then, check that job "SAP_CCMS_MONI_BATCH_DP is running. This job collects data in the CCCMS (RZ20).
12. Then, the alert will be automatically sends to your email adress.
Hope it helps ?
Best regards
SAPNetWeaverAdmin

Send mail notification

hi friends,
i have a problem:
We use automatic e-mail notification when we create a new EP user it works when we use standard user creation iview but it doesn't work when we create a user through web service...
i use the following code :
try {
                    IUserFactory iuf = UMFactory.getUserFactory();
                    user = iuf.newUser("francesco");
                    user.setFirstName("francesco");
                    user.setLastName("2nd name");
                    user.setEmail("[email protected]");
                    //user.setCellPhone("");
                    Locale lang = Locale.ITALIAN;
                    user.setLocale(lang);
                    user.save();
                    user.commit();
                    IUserAccountFactory uaf = UMFactory.getUserAccountFactory();
                    if (uaf != null) {
                         IUserAccount uacc =
                              uaf.newUserAccount("francesco", user.getUniqueID());
                         ISecurityPolicy ispf = UMFactory.getSecurityPolicy();
                         uacc.setPassword(ispf.generatePassword());
                         uacc.setPasswordChangeRequired(true);
                         uacc.save();
                         uacc.commit();
               } catch (UMException e) {
                    // TODO Auto-generated catch block
                    return e.getMessage();
previously tks.
Regards
Francesco

Hi,
we have the same problem and we don't think it's necessary to use the JavaMail API to send it inside the web service.
Best regards.
Angelo

Turn off e-mail notification for Find My iPhone

In iOS 8.0.2, how do you turn off the automatic e-mail notification you receive when someone tries to locate your device via Find My iPhone app?

This notification occurs every time you log into Find My iPhone on the iPhone if you log out of it before you use it again. Find My iPhone will automatically log out each time you leave it if you do not have a passcode on your device. If you have a passcode on the phone and the log into Find My iPhone, it will only notify you that time. It will remain logged into Find My iPhone and you will not receive another email unless you log in from another device. If you do a search of the forum, you will find a rather lengthy recent discussion about this same issue and may find additional answers to your question.

How to send e-mail notification automatically when a record is inserted?

Dear All,
Could anyone kindly tell me how to send e-mail notification automatically when a record is inserted through a form in Oracle Portal Release 2?
Regards,
Ridwan.

Hi,
If you are writing a form on a table then you can call the mail API from a database trigger on the table. If it is a form on a procedure, you can make the email call from the procedure. To know more about sending mails from plsql go to
http://www.quest-pipelines.com/newsletter-v2/smtp.htm
Thanks,
Sharmila

Automatically Get Mail On Login?

Is there a way to get Apple Mail to automatically "Get Mail" when you turn on your iMac and Login? Turning my iMac on, from it being off, the first thing I want to know is, have I got any new e-mail. It would be great if the Mail icon on the dock gave you an indication on Login, instead of you having to manually open Mail, and click "Get Mail".

An icon for an application will bounce in the dock when you start the application. When the script has finished the Script Editor icon will disappear from the dock (assuming you don't keep it there permanently) but the Mail icon should remain in the dock with a wee black triangle to show that it is running; click the icon to open the Mail window.
You can't have the icon update itself to show your new mail count unless you have mail running.
AK

I have an iPhone 4s and a hotmail account, and despite having configured push mail notifications to be received automatically and immediately, I fail, I have to do something extra? thanks

I have an iPhone 4s and a hotmail account, and despite having configured push mail notifications to be received automatically and immediately, I fail, I have to do something extra? thanks

IOS supported push mail account http://support.apple.com/kb/HT2625#

Syncing Mail Notifications Between Mac and iPhone

Hi
I been having this problem with the mail notifications not syncing between the Mail.app on my MacBook Pro and iPhone. Let me explain:
When I get a new email, I hear the sound and see the red notification icon appear on both the MacBook and the iphone. When it comes to checking the new email, here are the two possible scenarios:
a) If I check the new email on my phone, the red notification icon disappears from BOTH the iphone and the MacBook.
b) If I check the new email on my MacBook, the red notification disappears from the MacBook but DOESN'T disappears from the iPhone (that is until I open the app). This happens with both cases, when the app is "running" in the background or when it is complety closed.
I don't know if I am crazy but I am pretty sure that both of the notifications used to disappear before, no matter where I checked the mail.
I tried deleting and creating the email again on my phone, and it didn't work.
Here some info that could help find a solution:
- I'm using icloud email (@me.com)
MacBook
-Mountain Lion
iPhone:
- iOS 6 (this problem started before the upgrade)
- Push is on.
- Fetch (that suppodselly would be used only if push is off) is set to Manually.
- On the "Advanced" sub-menu inside the Mail settings, Push is also selected.
Hopefully this can actually be fix and I can prove myself that I was not crazy!!
Thanks in advance for the help!!

Anyone find a fix for this problem? I've been waiting for this since notification syncing was announced a couple years ago with iOS 6. I use iCloud for my email and find it very frustrating that when I read an email on my Mac or on iCoud.com that it doesn't automatically dismiss the notifications for those emails on my iOS devices until I open the mail app on each iOS device. Notification syncing works great with other apps. With iMessages, for example, when I read a message on my Mac running Yosemite, the notifications disappear on my iOS devices without opening the messages app (badge app icon, home screen notifications and notification center). Why can't they figure this out with email? I remember at my old job, I had an exchange account that properly synced mail notifications between devices, but it has never worked with my iCloud email. I wonder if I am just missing a particular setting or if Apple just blew it here. Any info would be greatly appreciated.

How to customize initial secure e-mail notification message

Can we customize the initial secure e-mail notification message with a company logo or any kind of text?
The one that says:
You have received a secure message
Read your secure message by opening the attachment, securedoc.html. You will be prompted to open (view) the file or save (download) it to your computer. For best results, save the file first, then open it in a Web browser. To access from a mobile device, forward this message to [email protected] to receive a mobile login URL.
If you have concerns about the validity of this message, contact the sender directly.
First time users - will need to register after opening the attachment.
Help - https://res.cisco.com/websafe/help?topic=RegEnvelope
About Cisco Registered Email Service - https://res.cisco.com/websafe/about
Basically we want to put our company logo to the top of this message. We already have our company logo added in CRES that shows up when you open the securedoc.html file.
Thanks!

Nevermind, I found it.
Mail Policies > Text Resources > Add Text Resource
Set the type as Encryption Notification Template (HTML), edit the HTML and then also add one with a type Encryption Notification Template (text), edit the text. Then go into the Security Services > IronPort E-Mail Encryption > modify the Encryption profile and choose the new Text Resources created above.
Under Text Resources I was also able to create custom bounce messages with variables that display all the relevant information regarding the bounce.

RE: Mail notification on changing the status of the spport desk messages

Hi,
I am facing problem with the automatic mail notification in service desk configuration.
When i create a support desk message in the satellite system, the message appears in crn_dno_monitor in solution manager. When i change the status of the message from new to in process, i get a mail only with the subject line "MESSAGE IN PROCESS STATUS' and the pdf attachement (sapscript) is missing. I have checked all the configurations in SPPFCADM but i am not able to figure out the problem. Please help me out of this problem.
Regards,
Sowmya

Hi,
there is a SAP Note with a tutor for send_mail via action. See Note 691303 and the attached .zip-file.
It shows step by step how to set it up and is a very good tutorial. You'll need additional (free) software to let it run.
Regards,
Dirk
@Sowmya: what content does the mail have? None? There is a possibility in SolMan where you can choose whether you want the content as a .PDF-Attachment (which, in my eyes, isn't that sparkling) or as regular mail text.
It is located in TA SCOT. Double klick on "SMTP", then klick on "Internet" and there choose in the Drop Down Menu of Sapscript. When you have trouble, look at my [screenshot|http://home.arcor.de/dirk.malas/solman/Mail_TXT_PDF.JPG].

Get an E-Mail-Notification if there is a alert for a SAP-System in DSWP

Hello,
how can i get an E-Mail-Notification when there is a alert in a SAP-System?
I know that alerts are shown in the transaction dswp under System Monitoring but exists a alternative to get these alerts via E-Mail?
In the transaction rz21 autoreactions can be defined for single MTE classes - but i search for a more generally method to get all in DSWP reported alerts via E-Mail.
Best Regards
Torsten Urban

Hello All,
You can get EWA reports thru mail.
Selection the solution for which you want the reports thru mail in DSWP tcode.
Then Edit>Automatic Email transmission>create Email recipeint.
Hope this solves your query.
Cheers,Amber S

E-mail notification for password reset

Hello,
We recently activated the e-mail notification of user requests password reset in SRM Portal.
After the password reset, the recipients will receive this message:
Dear <user>,
Your password has been reset. Your new password is <password>.
Is it possible to modify this message?
Thank you!

Hi,
I think the mail is sent from workflow.
Please check which workflow is triggered in SWI2_FREQ transaction.
For example,
Workflow WS10000224 has task TS10008202 and task called method RESETPASSWORDANDMAIL of Business Object BUS4101.
Please check Business Object BUS4101 and method ResetPasswordANDMail.
The method calls FM BBP_GENERATE_PASSW_MAIL.
Some text objects are used in this FM.
001     New password for procurement system
002     This is an automatic generated email. Please don't reply!
003     Dear employee,
004     your new password in the procurement system is:
005     Please change it as soon as possible.
006     User account for procurement system
007     your user account in the procurement system is:
I can not find your text in this FM.
>Dear <user>,
>Your password has been reset. Your new password is <password>.
Regards,
Masa

Mail send error in Oracle UCM Test Mail/Notifications

Hi Everyboby,
I have configured workflows which need approval. While the documenr is checked in the notification should be fired to the reviewer. But the mail notification is not working.
Also I have tried to login as sysadmin and tried the Administration -> Actions -> Send test mail link but it pops up the following message/exception.
Unable to send email. The following recipient(s) '[email protected]' are not valid user or alias names.
[ Details ]
intradoc.common.ServiceException: !csRecipientsNotUsersOrAliases,[email protected]
at intradoc.server.SystemAuditHandler.sendEmail(SystemAuditHandler.java:414)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
It is noteworthy that a couple of days back the Notifications were working fine. No clue what happened.
I am pasting the config file portion. Hope this helps.
#Internet Variables
HttpServerAddress=localhost
MailServer=172.16.1.10
SysAdminAddress=[email protected]
SmtpPort=25
HttpRelativeWebRoot=/idc/
CgiFileName=idcplg
UseSSL=No
WebProxyAdminServer=true
Can someone help or provide me a comprehensive document for enabling Notifications.
Thanks in Advance

Hey Prashant,
In UCM you cant send an email directly to a mail address. What you need to do it add user and provide that user with correct email address.
and at all place in to field you need to mention name of the user, not his email address.
while testing the email send the mail to sysadmin
then you would not face any problem.
cheers,
sapan

Mail notifications not working correctly on iPhone 5

On my new iPhone 5 I have mail notifications set up as on in the notification center, alert style is banners, badge app icon is on and show preview is on, view in lock screen is off. It is set up the same way as when I had an iPhone 4. However, when I get a new email and the phone's screen is not on, the next time I turn it on I will not get the banner alert, all I see is the badge icon. This is kind of annoying as I would like to see the banner to know who the email is from before going into the mail app.
The notifications for mail on my iPad running iOS 6 just like my iPhone 5 are set up the same way and work correctly.
Why would they not be working correctly on my iPhone 5?

Roshanalex
I have tried what you are saying and all the above, I don't think you understand what we are saying is happening to us because you probably never used or use it. We understand that you can see the notification by pulling down the notification tab from the top of the screen but in the past for example on my ipad and iphone 4 it would show you a preview banner of your emails you have received for the day had you not unlocked your phone for any given amount of time and given you did receive any emails the next time you unlocked your phone it would bring up top of the screen a preview of each email you had in your inbox automatically one by one in the banners without having to go to the notification pull down. It is a bug because I guarntee if you turned it on you wouldn't see what were talkin about either and you wouldn't if you've never were setup for that intention either.

E71 -- Cannot open SMS if E-mail notification is e...

Hi Nokians,
I have discovered a bug. When e-mail is configured as such:-
Automatic Retrieval > E-Mail notifications > only in home network
When I open an incoming SMS, a warning message appeared:-
"Messaging: Memeory Full. Close some applications and try again."
I checked my phone's memory, it has 95MB free memory.
I need to disable E-mail notifications, then only I am able to open an incoming SMS.
On another matter, what is the differecen between these two:-
1. Automatic retrieval > E-mail notifications
2. Automatic retrieval > E-mail retrieval
I can only enable either one of them but not both.
My phone's specification:
200.21.118
27-11-2008
RM346
NOKIA E71-1(26)
Message Edited by mecool2008 on 08-Feb-2009 06:45 PM

/discussions/board/message?board.id=communicators&message.id=25156
Articles posted courtesy engadget
keep us updated about the progress.... if u like wat I have to offer then click on khudos.

Gnome automatic login + mail-notification paswords

Similar Messages

Maybe you are looking for