Gnome contacts (-search provider) - high CPU usage
Hi, my CPU is all the time on 100% usage by process gnome-contact-search-provider until I kill that process. In few minutes the process is back there and again 100% CPU usage.. my CPU fan goes crazy.
When I run gnome-contacts the app immediately freezes without no error. No contacts visible. And the app was in the past full of contacts.
Any idea what can be wrong?
Thanks for any advice
GNOME Shell 3.12.2
3.16.1-1-ARCH
Last edited by 5ulo (2014-08-25 17:25:18)
I've found these reports:
Gnome: https://bugzilla.gnome.org/show_bug.cgi?id=745356
Ubuntu: https://bugs.launchpad.net/ubuntu/+sour … ug/1079315
RedHat: https://bugzilla.redhat.com/show_bug.cgi?id=919889
It seems that working with a lot of Gmail contacts causes problems to gnome-contacts.
Edit: I suspect that not only that after disabling Gmail contacts sync.
Last edited by ChuckDaniels (2015-03-30 16:03:29)
Similar Messages
-
Gnome Volume Control High CPU Usage
I have an interesting problem.
When I boot into Arch, my CPU usage is farly low. Jumping around 0 - 10% or so.
But as soon as I open up Gnomes Volume Control window. Cpu usage jumps up to 50 - 60% and stays there, No matter if the windows open or not.
My front channel is also at 0% on boot, so I normally go into the Volume Control to bring that up.
I noticed using alsamixer in the terminal will prevent the cpu usage from going so high. But if I open Gnome's Volume Manager, I have to log out, and log back in to get cpu usage back to normal. Is there anyway to avoid this or fix this issue?This seems to be a known bug. http://www.google.com/search?hl=en&q=gn … h&aq=f&oq=
-
One of the web application is sudendly consumming high cpu usage.
hi
there are two web application running on the the standlone server.one of the web application is sudendly consumming high cpu usage. because of this issue, the entire cpu usages become very high and result in HTTP THROTTLING error. please suggest ways to
resolve this problem.
in the same standlone server, what are the service that must not run or minimum services that are required.
server:-
48 gb ram,
8 core processor
thanks in advancedHi jackhill,
Please check whether you configure Search service in your SharePoint.
And please use Taskmgr on the server to check which process may be cause this issue.
In addition, there is an article about high CPU in SharePoint 2013, please check if it is useful for you:
https://speverything.wordpress.com/2013/03/12/sharepoint-2013-high-cpu-and-memory-utilization-killing-my-server/
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Ntoskrnl High CPU usage ExEnterCritical0x40
Hello,
We have an issue where the System process is using 60-80% CPU usage. Using ProcessExplorer we can see that the SystemProcess has mutiple threads with ExEnterCriticalRegionandAcquireResourceExclusive0x40.
How do i see what is causing this thread and why there are a shedload of them active?
Regards,
Mathew TophamHi Sir,
Please refer to following article regarding troubleshooting high cpu usage in system process :
http://blogs.technet.com/b/yongrhee/archive/2009/08/07/how-to-troubleshoot-high-cpu-in-the-system-process.aspx
By the way , what is the os you are using ?
Please installed all update patch and newest hardware driver first .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
SBS 2011 - High CPU usage - Help me Microsoft forums! You're my only hope!
My company supports a client that has a SBS 2011 server. For about the past year, we've been fighting a recurring issue with performance on this server. There are about ten local users and four remote users. The server's CPU idles at
about 60%-80% but is usally running when under *any* load from 80%-100%. If you do anything on the console, it will stay pretty much at 100%. These are not power users by any means. The server is utilized for file/printer sharing, Exchange
2010, and one flat file database application (non-SQL). SharePoint is not utilized.
Needless to say, our client is frustrated. When opening files, using their database application, or doing anything Exchange-related, there is a large amount of lag on the client side. First, here are the server's specs:
Make:Dell PowerEdge T420
OS: SBS 2011 Standard SP1
CPU: 2 - Intel Xeon E5-2407
Memory: 32GB
RAID: RAID 1 - Operating System (C:)/Data Volume (E:) | RAID 5 - Data Volume (D:)
Here is what we have tried to resolve this to finality:
* Doubled resources - Initially the server had a single physical processor and 16GB of memory. While these specs alone should have been fine, and were fine when the server was installed, we had periods of time where the server would just sit all day at
100% usage. We doubled the resources and while this seemed like it would fix the issue, we are still seeing abnormally high processor usage.
* Removed all monitoring tools, antivirus, and backup software - As part of our testing, we removed our monitoring agent (LabTech) and antivirus (GFI Vipre). Mozy is utilized for an off-site backup so that was disabled. No dice.
* Verified updates - We made absolutely sure the server was 100% patched.
* Malware/Virus/Rootkit checks - We have ran scans checking for any potential issues with security.
* Ran MBSA and MBCA to fix any issues with the server's configuration.
There is no single process which is using all of the CPU, or we would simply be able to narrow it down. Our calls to Microsoft support have yielded no answers. The last call ended with Microsoft stating that a SBS server should always be running
at high CPU usage. Meanwhile, we have many other clients with less-beefy servers, with more users, who have no issues like these.
So, I'm turning to you all. I will gladly provide logs, configuration settings, even remote assistance sessions if you all can help shed some light on what might be causing my issues.
Thank you!Some comments/ideas:
How long was the server running after this screenshot? I ask because store.exe is only got a 1GB of RAM which is really low - it should grab most of the RAM within a few hours.
The server was up for about 12 hours. I believe an adjustment was made before to limit the Exchange memory usage.
Strange that SearchIndexer (wsearch service) is so high although that may be a startup condition.
The LT* processes seem to be a 3rd party monitoring tool - no idea why it would ever need that much CPU though (I thought you disabled this?).
We had, but we cannot go forever without monitoring our client's server. It has been pulled off in the past and results on performance are pretty much the same.
The taskmgr process run by amnet_admin has used a lot of total CPU Time. What is it? (can't see the command line).
That's the user I was logged in as when I took the screenshot. Even the task manager seems to eat up the CPU.
The sqlserver process right above it is also busy - may want to look at the command line and figure out which SQL database that is (SBS has 3 - WSUS, Sharepoint, and SBS monitoring)
I believe that's the SharePoint database. They don't currently use their site. Would you recommend a removal and reinstallation? I would not completely remove as I know SBS doesn't like you removing parts of the complete package.
Strange that vds.exe is 10% - that is the interface to the disk management interface IIRC. Perhaps your monitoring service has gone awry here - definitely lose it.
I'll see about pulling it off and I'll see if there are any improvements.
-- Al -
Hi everyone,
I'm having an issue with Word 2013 and I'm hoping someone can help. Seen as I got fleeced for my TechNet subscription this year (the price given on the invoice doubled when I called up to pay!) I’d very much like to see a speedy fix from the Microsofties
please! :D
Recently, I've found that Word will consistently exhibit high CPU utilisation, ~50% on a dual core second generation Core i5.
This continues, even when I’m not providing any input to or interacting with the Word window and even when the Word window is covered by other windows. Minimising Word causes its CPU usage to drop back down to zero.
The strange thing is that, so far, I’ve only observed this with a single document. I started writing this document at the start of this week and it’s been authored exclusively on Word 2013. In fact I’m the only one who’s editing it and I’ve only used a single
computer (and this one single install of Word 2013) to do so…
There’s nothing particularly unusual about this document, and a different but similar document which uses the same themes and features (in fact the theme for the second document was created from the first one) doesn’t appear to cause the same issues. Both
these documents are stored on SkyDrive, and are being edited directly from there.
Initially I tried the much recommended tweaks of disabling hardware graphics acceleration and sub-pixel positioning, however neither of these has had any effect.
I investigated a bit further using Sysinternals Process Monitor, and found that while Word is using a lot of CPU it’s actually looping very, very quickly polling for the existence of the registry key “HKCU\Software\Microsoft\Avalon.Graphics”.
This key doesn’t exist on my system, and a quick test I conducted where I created it just lead to Word looping polling for more non-existent registry keys.
My system is a HP Folio 13 running Windows 8 Pro x64 with Office 2013 (RTM, not Beta) 32 bit. Both Windows and Office are fully patched, as is everything else on the system.
Thanks in advance for any help anyone can offer.
ChrisHello again,
After working on my problematic document some more, I believe I’ve found the cause of the issue.
@Microsofties – I think this one is either a bug or a dodgy OOTB template…
I noticed that the high CPU usage only seemed to occur when the document’s footer was displayed. Experimenting with some careful scrolling and zooming to hide footer (without actually using the “hide white-space” option) seemed to confirm this so I investigated
the footer a bit more.
My document was using the standard Word “Facet (Odd Page)” footer template with a couple of fields added to suit my needs, namely “Publish Date” and a page number.
The template seems to be structured such that the content of the footer is inside two nested text boxes (one inside the other). I also noticed previously that this footer template also appears to “jump” up each page and back down again as I scrolled.
So I deleted the footer and its text boxes, and recreated the same content, in the same position (using the standard paragraph alignment tools) by hand without the nested text boxes. This has, so far, fixed the issue!
I also noticed that the CPU usage dropped right down to idle the moment I deleted the nested text boxes.
Altogether, this leads me to conclude that the “Facet (Odd Page)” footer template in Word 2013 is the source of my issue. Specifically, I believe that the use of nested text boxes in this template causes Word’s interactions with the .Net 4.5 WPF to go a
bit nuts, as evidenced by the infinite loop of request for the non-existent “Avalon.Graphics” WPF registry key I mentioned previously.
It would be nice to see some feedback on this one, Microsoft people, if only to know if this is actually a general issue or is specific to my document!
Thanks, Chris -
High CPU usage when graphics card is put at work
I have a 13inch Air with 2GB RAM and 256GB with Windows 7 Ultimate 64bit. All possible updates have been installed.
I noticed some tearing when trying to move program windows across the screen so I started checking the CPU usage. I saw that it is spiking to 25-35% when moving a window across the screen.When you drag down a window you can see the different copies of the top bar across the screen. Not smooth at all like on a standard PC windows system. Same issue when scrolling through webpages which spikes the cpu
I also noticed a high cpu usage when playing mkv files 25-30% while on an Atom HTPC i get a lower load playing the same file. The Air should be faster than an atom with a nvidia 9400m when playing video files.
I already tried updating the nvidia files to the latest version on their site by hacking the driver inf but this did not resolve the issue.
Has anyone experienced the same or know what could be causing the beavior?
Many thanksMaybe my initial post was not clear so let me add some clarifications.
I have the problem with Aero disabled
I have the problem on the Apple site which does not have any flash content.
I have already hacked the lastest nvidia drivers to get them on my system which did not change anything. Can you provide a link to some other 'supported' beta drivers?
I am using the new 13 inch air so it has the newer graphics card so I would expect it to be faster than an old HTPC with a 9400m in it. I wasn't stating that my Air had a 9400m.
It would be great if someone you also do the test to check the cpu load:
- when playing a 720 mkv
- when dragging a window across the screen
Just open task manager and see if the CPU spikes.
Many thanks! -
High cpu usage during JSF lifecycle phase execution
In our performance test we encountered a high cpu usage (100%) and the thread dumps indicated that most of the times the threads are either executing restore view or render response phase of the JSF lifecycle or they are blocked while accessing the jar files which containing the xhtml pages.
One of the thread dump of a runnable thread is
java.lang.Thread.State: RUNNABLE
at java.util.HashMap.get(HashMap.java:317)
at javax.faces.component.ComponentStateHelper.get(ComponentStateHelper.java:174)
at javax.faces.component.ComponentStateHelper.add(ComponentStateHelper.java:216)
at javax.faces.component.UIComponent.setValueExpression(UIComponent.java:436)
at com.sun.faces.facelets.tag.jsf.CompositeComponentTagHandler$CompositeComponentRule$CompositeExpressionMetadata.applyMetadata(CompositeComponentTagHandler.java:631)
at com.sun.faces.facelets.tag.MetadataImpl.applyMetadata(MetadataImpl.java:81)
at javax.faces.view.facelets.MetaTagHandler.setAttributes(MetaTagHandler.java:129)
at javax.faces.view.facelets.DelegatingMetaTagHandler.setAttributes(DelegatingMetaTagHandler.java:102)
at com.sun.faces.facelets.tag.jsf.CompositeComponentTagHandler.setAttributes(CompositeComponentTagHandler.java:246)
at com.sun.faces.facelets.tag.jsf.CompositeComponentTagHandler.applyNextHandler(CompositeComponentTagHandler.java:184)
at com.sun.faces.facelets.tag.jsf.ComponentTagHandlerDelegateImpl.apply(ComponentTagHandlerDelegateImpl.java:184)
at javax.faces.view.facelets.DelegatingMetaTagHandler.apply(DelegatingMetaTagHandler.java:120)
at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:98)
at com.sun.faces.facelets.compiler.NamespaceHandler.apply(NamespaceHandler.java:93)
at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:98)
at com.sun.faces.facelets.compiler.EncodingHandler.apply(EncodingHandler.java:86)
at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:308)
at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:367)
at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:346)
at com.sun.faces.facelets.impl.DefaultFaceletContext.includeFacelet(DefaultFaceletContext.java:199)
at com.sun.faces.facelets.tag.ui.IncludeHandler.apply(IncludeHandler.java:120)
at javax.faces.view.facelets.DelegatingMetaTagHandler.applyNextHandler(DelegatingMetaTagHandler.java:137)
at com.sun.faces.facelets.tag.jsf.ComponentTagHandlerDelegateImpl.apply(ComponentTagHandlerDelegateImpl.java:184)
at javax.faces.view.facelets.DelegatingMetaTagHandler.apply(DelegatingMetaTagHandler.java:120)
at com.sun.faces.facelets.tag.ui.DefineHandler.applyDefinition(DefineHandler.java:107)
at com.sun.faces.facelets.tag.ui.CompositionHandler.apply(CompositionHandler.java:178)
at com.sun.faces.facelets.impl.DefaultFaceletContext$TemplateManager.apply(DefaultFaceletContext.java:395)
at com.sun.faces.facelets.impl.DefaultFaceletContext.includeDefinition(DefaultFaceletContext.java:366)
at com.sun.faces.facelets.tag.ui.InsertHandler.apply(InsertHandler.java:112)
at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:98)
at javax.faces.view.facelets.DelegatingMetaTagHandler.applyNextHandler(DelegatingMetaTagHandler.java:137)
at com.sun.faces.facelets.tag.jsf.ComponentTagHandlerDelegateImpl.apply(ComponentTagHandlerDelegateImpl.java:184)
at javax.faces.view.facelets.DelegatingMetaTagHandler.apply(DelegatingMetaTagHandler.java:120)
at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:98)
at com.sun.faces.facelets.compiler.NamespaceHandler.apply(NamespaceHandler.java:93)
at com.sun.faces.facelets.compiler.EncodingHandler.apply(EncodingHandler.java:86)
at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:308)
at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:367)
at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:346)
at com.sun.faces.facelets.impl.DefaultFaceletContext.includeFacelet(DefaultFaceletContext.java:199)
at com.sun.faces.facelets.tag.ui.CompositionHandler.apply(CompositionHandler.java:155)
at com.sun.faces.facelets.compiler.NamespaceHandler.apply(NamespaceHandler.java:93)
at com.sun.faces.facelets.compiler.EncodingHandler.apply(EncodingHandler.java:86)
at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:308)
at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:367)
at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:346)
at com.sun.faces.facelets.impl.DefaultFaceletContext.includeFacelet(DefaultFaceletContext.java:199)
at com.sun.faces.facelets.tag.ui.IncludeHandler.apply(IncludeHandler.java:120)
at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:98)
at com.sun.faces.facelets.compiler.NamespaceHandler.apply(NamespaceHandler.java:93)
at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:98)
at com.sun.faces.facelets.compiler.EncodingHandler.apply(EncodingHandler.java:86)
at com.sun.faces.facelets.impl.DefaultFacelet.apply(DefaultFacelet.java:152)
at com.sun.faces.application.view.FaceletViewHandlingStrategy.buildView(FaceletViewHandlingStrategy.java:774)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:100)
at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:139)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:594)
at org.apache.catalina.core.StandardWrapper.service(StandardWrapper.java:1550)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:343)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)while a thread trace for a blocked thread is
java.lang.Thread.State: BLOCKED (on object monitor)
at java.util.zip.ZipFile.getEntry(ZipFile.java:302)
- waiting to lock <0x00000000c0f678f8> (a java.util.jar.JarFile)
at java.util.jar.JarFile.getEntry(JarFile.java:225)
at java.util.jar.JarFile.getJarEntry(JarFile.java:208)
at sun.misc.URLClassPath$JarLoader.getResource(URLClassPath.java:817)
at sun.misc.URLClassPath$JarLoader.findResource(URLClassPath.java:795)
at sun.misc.URLClassPath.findResource(URLClassPath.java:172)
at java.net.URLClassLoader$2.run(URLClassLoader.java:551)
at java.net.URLClassLoader$2.run(URLClassLoader.java:549)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findResource(URLClassLoader.java:548)
at java.lang.ClassLoader.getResource(ClassLoader.java:1138)
at java.lang.ClassLoader.getResource(ClassLoader.java:1133)
at org.glassfish.web.loader.WebappClassLoader.getResource(WebappClassLoader.java:1156)
at org.glassfish.web.loader.WebappClassLoader.getResourceFromJars(WebappClassLoader.java:1111)
at org.apache.catalina.core.StandardContext.getMetaInfResource(StandardContext.java:7586)
at org.apache.catalina.core.StandardContext.getResource(StandardContext.java:6979)
at org.apache.catalina.core.ApplicationContext.getResource(ApplicationContext.java:382)
at org.apache.catalina.core.ApplicationContextFacade.getResource(ApplicationContextFacade.java:260)
at com.sun.faces.context.ExternalContextImpl.getResource(ExternalContextImpl.java:502)
at com.sun.faces.application.resource.WebappResourceHelper.getURL(WebappResourceHelper.java:119)
at com.sun.faces.application.resource.ResourceImpl.getURL(ResourceImpl.java:190)
at com.sun.faces.facelets.tag.jsf.CompositeComponentTagHandler.applyCompositeComponent(CompositeComponentTagHandler.java:366)
at com.sun.faces.facelets.tag.jsf.CompositeComponentTagHandler.applyNextHandler(CompositeComponentTagHandler.java:191)
at com.sun.faces.facelets.tag.jsf.ComponentTagHandlerDelegateImpl.apply(ComponentTagHandlerDelegateImpl.java:184)
at javax.faces.view.facelets.DelegatingMetaTagHandler.apply(DelegatingMetaTagHandler.java:120)
at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:98)
at com.sun.faces.facelets.compiler.NamespaceHandler.apply(NamespaceHandler.java:93)
at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:98)
at com.sun.faces.facelets.compiler.EncodingHandler.apply(EncodingHandler.java:86)
at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:308)
at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:367)
at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:346)
at com.sun.faces.facelets.impl.DefaultFaceletContext.includeFacelet(DefaultFaceletContext.java:199)
at com.sun.faces.facelets.tag.ui.IncludeHandler.apply(IncludeHandler.java:120)
at javax.faces.view.facelets.DelegatingMetaTagHandler.applyNextHandler(DelegatingMetaTagHandler.java:137)
at com.sun.faces.facelets.tag.jsf.ComponentTagHandlerDelegateImpl.apply(ComponentTagHandlerDelegateImpl.java:184)
at javax.faces.view.facelets.DelegatingMetaTagHandler.apply(DelegatingMetaTagHandler.java:120)
at com.sun.faces.facelets.tag.ui.DefineHandler.applyDefinition(DefineHandler.java:107)
at com.sun.faces.facelets.tag.ui.CompositionHandler.apply(CompositionHandler.java:178)
at com.sun.faces.facelets.impl.DefaultFaceletContext$TemplateManager.apply(DefaultFaceletContext.java:395)
at com.sun.faces.facelets.impl.DefaultFaceletContext.includeDefinition(DefaultFaceletContext.java:366)
at com.sun.faces.facelets.tag.ui.InsertHandler.apply(InsertHandler.java:112)
at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:98)
at javax.faces.view.facelets.DelegatingMetaTagHandler.applyNextHandler(DelegatingMetaTagHandler.java:137)
at com.sun.faces.facelets.tag.jsf.ComponentTagHandlerDelegateImpl.apply(ComponentTagHandlerDelegateImpl.java:184)
at javax.faces.view.facelets.DelegatingMetaTagHandler.apply(DelegatingMetaTagHandler.java:120)
at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:98)
at com.sun.faces.facelets.compiler.NamespaceHandler.apply(NamespaceHandler.java:93)
at com.sun.faces.facelets.compiler.EncodingHandler.apply(EncodingHandler.java:86)
at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:308)
at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:367)
at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:346)
at com.sun.faces.facelets.impl.DefaultFaceletContext.includeFacelet(DefaultFaceletContext.java:199)
at com.sun.faces.facelets.tag.ui.CompositionHandler.apply(CompositionHandler.java:155)
at com.sun.faces.facelets.compiler.NamespaceHandler.apply(NamespaceHandler.java:93)
at com.sun.faces.facelets.compiler.EncodingHandler.apply(EncodingHandler.java:86)
at com.sun.faces.facelets.impl.DefaultFacelet.apply(DefaultFacelet.java:152)
at com.sun.faces.application.view.FaceletViewHandlingStrategy.buildView(FaceletViewHandlingStrategy.java:774)
at com.sun.faces.application.view.StateManagementStrategyImpl.restoreView(StateManagementStrategyImpl.java:223)
at com.sun.faces.application.StateManagerImpl.restoreView(StateManagerImpl.java:188)
at com.sun.faces.application.view.ViewHandlingStrategy.restoreView(ViewHandlingStrategy.java:123)
at com.sun.faces.application.view.FaceletViewHandlingStrategy.restoreView(FaceletViewHandlingStrategy.java:453)
at com.sun.faces.application.view.MultiViewHandler.restoreView(MultiViewHandler.java:148)
at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:192)
at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101)
at com.sun.faces.lifecycle.RestoreViewPhase.doPhase(RestoreViewPhase.java:116)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:118)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:593)
at org.apache.catalina.core.StandardWrapper.service(StandardWrapper.java:1550)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:343)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)We use glassfish 3.1.1 as our application and the project_stage property is set to System_test. I would like to get suggestions on how should I investigate this further. Is this a normal behavior? Does glassfish provide an alternative for resolving blocked threads like some caching mechanism for resources etc?
Thanks in advanceNik wrote:
Even if it is legal, have you tried moving them out of there (just to pinpoint a possible bug since the stacktrace indicates a wait on a jar file)?Indeed. If that clears up the issue it is good information to put in a JSF bug report (which may even cascade to the Glassfish level).
Putting resources in a jar file is only really useful when you want to share those resources among different web applications, which should be a rare case. Even when it happens I would probably still choose to simply copy the resources so they are individually managed and you don't get unnecessary dependencies between applications. Just because something is technically possible doesn't make it a good idea. -
CF 10 sp 12 Enterprise high CPU usage hangs services, 2012 server on 2012 Hyper-V host
The last 2 days - my [removed link] CF site has suffered from high CPU usage (on and off) that stops functionality.
This will last several minutes then suddenly the high usage stops a few minute later the high cpu usage starts again.
I don't have any scheduled processes allowed to run.
Restarting the coldfusion service during a high CPS incident - the cpu usage just picks up where it left off when restarted.
I have assigned 4 CPUs (normal) or 8CPUs (as a test) to the VM and I get the same high CPU then low usage. This is a fresh install several months ago on a new VM.
I'd like some Adobe support on this issue but can't seem to find the contact phone number.
This series of high and low cpu usage first started Monday AM about midnight until 7:00 AM Tuesday was quiet and Wednesday this AM I'm having the same issues.
Ideas?
Update: While waiting for this to post - the high CPU usage started again and this time I stopped and restarted the Jetty service ... and the CPU usage went away...
Update: the high cpu started again and a restart of the jetty service didn't help --- neither did the .net service restart... the cf10 application service did stop the high usage...
Jay Bietz
Message was edited by: Jay Bietz after post accepted.After 2 hang free days -- Friday midnight (above is the gcviewer ) and ~2 hours later had the hang condition again. Current java.config includes
java.args=-server -Xms4096m -Xmx4096m -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005 -XX:PermSize=512m -XX:MaxPermSize=512m -XX:+UseParallelGC -Xbatch -Dcoldfusion.home={application.home} -Dcoldfusion.rootDir={application.home} -Dcoldfusion.libPath={application.home}/lib -Dorg.apache.coyote.USE_CUSTOM_STATUS_MSG_IN_HEADER=true -Dcoldfusion.jsafe.defaultalgo=FIPS186Random -Dcom.sun.management.jmxremote.port=8701 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false -Xmn1024m -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGC -verbose:gc -Xloggc:cfwhispererGClive4.log -Dcoldfusion.classPath={application.home}/lib/updates,{application.home}/lib,{application .home}/lib/axis2,{application.home}/gateway/lib/,{application.home}/wwwroot/WEB-INF/flex/j ars,{application.home}/wwwroot/WEB-INF/cfform/jars,C:\\CFusion10\\cfusion\\verisign\\payfl owpro\\Java\\PFProColdFusion,C:\\CFusion10\\cfusion\\verisign\\payflowpro\\Java\\PFProCold Fusion\\Verisign.jar
GCviewer shows that the full GCcollections suddenly start firing off many times in a short period of time.
Jay
will work on the tomcatlog issues next. -
This is a spin off from another thread which started off as slow inserts. But what actaully happens is every insert is preceded by select it turned out that the select was slow.
We have a multi-tier web application conencting to the DB using connection pool and inserting about a 100000 records in a table. To isolate the issue I wrote a PL/SQL which does the same thing.
This problem happens every time the schema is recreated or the table dropped and created again and we start inserting. When the table is empty, the selects choose a full table scan but as the records are inserted it continues to use the same even though after a few thousands of rows I run stats. But as its running if gather stats and flush the shared pool, it picks up the new plan using the indexes and immediately gets faster.
But in either case, full tablescan being slow after a few thousands of rows or using the index and getting much faster. Or me just doing the same select and no inserts on a table with 100000 rows, the CPU seems to be pegged to the core.
The code snipped repeated again
DECLARE
uname NVARCHAR2 (60);
primid NVARCHAR2 (60);
num NUMBER;
BEGIN
FOR i IN 1 .. 100000
LOOP
uname := DBMS_RANDOM.STRING ('x', 20);
primid := DBMS_RANDOM.STRING ('x', 30);
DBMS_OUTPUT.put_line (uname || ' ==> ' || primid);
SELECT COUNT (*)
INTO num
FROM TEST
WHERE ID = 0
AND (primid = primid OR UPPER (username) = uname OR uiname = uname
AND (deldate IS NULL)
ORDER BY TIME DESC;
INSERT INTO TEST
VALUES (0, uname, uname, 1, uname, primid);
IF MOD (i, 200) = 0
THEN
COMMIT;
DBMS_OUTPUT.put_line ('Commited');
END IF;
END LOOP;
END;This is the original thread
Re: Slow insertsMaybe if you post the actual code, or a code as similar to the actual code, the users of this forum may provide you with more appropriate suggestions.
Personally, I would like to understand what is the logic behind, so I can provide you with better advices.
Anyway, let's focus on the code that we currently have on the table.
Why your CPU goes high?
- Huge amount of LIOs produced by SELECT statement which is executed 100000 times.
- Usage of single-row / aggregate functions
- You mentioned you have some indexes created on table TEST. Index maintenance consumes some CPU as well.
Let's focus on the SELECT statement, since it is the most important reason for having high number of LIOs thus having high CPU usage.
I built a test case using the query you provided, with one difference, I named TEST table columns as COL1, COL2, etc. And instead of 100,000 cycles, I did 10,000
declare
uname varchar2(60);
pname varchar2(60);
num number(5);
begin
for i in 1..10000 loop
uname:=dbms_random.string('x',30);
pname:=dbms_random.string('x',20);
select count(1)
into num
from test
where col1=0
and (col2=uname or upper(col5)=pname or col3=uname)
and col4 is not null;
insert into test
values (0,uname,pname,1,uname,uname);
if mod(i,200)=0 then
commit;
end if;
end loop;
end;When I run 10046 trace and made tkprof report, I got the following for the SELECT part:
SELECT COUNT(1)
FROM
TEST WHERE COL1=0 AND (COL2=:B1 OR UPPER(COL5)=:B2 OR COL3=:B1 ) AND COL4 IS
NOT NULL
call count cpu elapsed disk query current rows
Parse 2 0.00 0.00 0 0 0 0
Execute 10050 0.48 0.43 0 0 50 0
Fetch 10000 94.07 94.37 0 2910664 2 10000
total 20052 94.56 94.80 0 2910664 52 10000As you can see, tkprof report indicated high CPU usage and 2,910,664 LIO calls.
The execution plan (I didn't include that part) indicated FULL TABLE scan on table TEST was used.
At this point the goal should be to reduce the number of LIO calls.
For this purpose I created the following indexes:
TEST_IDX1 on TEST(col2)
TEST_IDX2 on TEST(col3)
TEST_IDX3 on TEST(upper(col5)) - a Function Based Index
Let's forget about the statistics at this moment.
I will use index_combine hint in the SELECT statement to make CBO to try every index combination for listed indexes (B-Tree) and make bitmap conversion.
The new code looks like this
declare
uname varchar2(60);
pname varchar2(60);
num number(5);
begin
for i in 1..10000 loop
uname:=dbms_random.string('x',30);
pname:=dbms_random.string('x',20);
select /*+ index_combine(test test_idx1 test_idx2 test_idx3) */ count(1)
into num
from test
where col1=0
and (col2=uname or upper(col5)=pname or col3=uname)
and col4 is not null;
insert into test
values (0,uname,pname,1,uname,uname);
if mod(i,200)=0 then
commit;
end if;
end loop;
end;After running 10046 trace and creating tkprof report, I got the following result:
SELECT /*+ index_combine(test test_idx1 test_idx2 test_idx3) */ COUNT(1)
FROM
TEST WHERE COL1=0 AND (COL2=:B1 OR UPPER(COL5)=:B2 OR COL3=:B1 ) AND COL4 IS
NOT NULL
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 10000 0.79 0.70 0 0 0 0
Fetch 10000 0.68 0.71 3 59884 0 10000
total 20001 1.47 1.42 3 59884 0 10000
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer mode: ALL_ROWS
Parsing user id: 54 (recursive depth: 1)
Rows Row Source Operation
10000 SORT AGGREGATE (cr=59884 pr=3 pw=0 time=1188641 us)
0 TABLE ACCESS BY INDEX ROWID TEST (cr=59884 pr=3 pw=0 time=1012723 us)
0 BITMAP CONVERSION TO ROWIDS (cr=59884 pr=3 pw=0 time=915796 us)
0 BITMAP OR (cr=59884 pr=3 pw=0 time=820728 us)
0 BITMAP CONVERSION FROM ROWIDS (cr=20039 pr=1 pw=0 time=258455 us)
0 INDEX RANGE SCAN TEST_IDX1 (cr=20039 pr=1 pw=0 time=157107 us)(object id 52988)
0 BITMAP CONVERSION FROM ROWIDS (cr=19902 pr=1 pw=0 time=198466 us)
0 INDEX RANGE SCAN TEST_IDX2 (cr=19902 pr=1 pw=0 time=109999 us)(object id 52989)
0 BITMAP CONVERSION FROM ROWIDS (cr=19943 pr=1 pw=0 time=198730 us)
0 INDEX RANGE SCAN TEST_IDX3 (cr=19943 pr=1 pw=0 time=107200 us)(object id 52990)As you can see the number of LIO calls fallen dramatically. Also CPU time is significantly less.
The second code completed in few seconds compared to the previous one which needed about 100 seconds to complete.
Please be aware that this is just an example of tuning the code that you provided.
This solution might not be suitable for your actual code, since we don't have any information about it. That's why it is important to give us as much information as you could, so you can get the most appropriate answer.
If the test code is similar to the actual one, you should focus on reducing LIOs calls.
In order to achieve it, you may want to use hints to force an index to be used.
Cheers,
Mihajlo -
High CPU Usage with Flash Player 11
I am not sure what the problem is but ever since I had those issues I went back to flash archive and installed a previous version that did not come with the flash plug in and I never had any problem with it since I am currently using the Adobe flash version 10 plug in with an adobe flash player active X. and I find out it was the new flash plug in that is the issue it suck all your ram. If you get some people who is having the same issues where flash player is duplicating and eating all their ram then ask them to try the version 10 plug in with the flash 11 active x it will work fine. I tried to run the version 10 flash as a complete set but some dynamic site that plays videos require a later version of flash active x to work and will be asking for an update however by keeping the flash 10 plug in there won't be any other issues. Adobe need to find out what is wrong with the new flash plug in and run a comparison with the flash 10 plug in. I hope this will help some user to get over the issues that made my online experience a nightmare for a while too.
The best way to get a resolution is to address your individual issue. Your complaint is that RAM usage is high, which is unrelated to the thread from the guy on Mac that was seeing High CPU usage on high definition video.
In order to fix the issue that you're describing, we need to be able to reproduce it. Please provide the information below, and the results of the basic troubleshooting steps as you work through them. This will help us narrow down the root-cause, and allow us to find comparable hardware in our compatibility lab to reproduce the issue with.
Basic Troubleshooting Info
To help troubleshoot we'll need the following system information:
- Operating system
- Browser
- Flash Player version - http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
- Antivirus/Anti-Malware software and versions
The first step is to work through the video troubleshooting guide for your operating system, here:
- Windows - http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
- Mac - http://helpx.adobe.com/flash-player/kb/video-playback-issues.htm
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
- Windows - http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_For_Windows_users
- Mac - http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_For_Mac_OS_users
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify this by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the menu.
- HTML5 video - http://www.youtube.com/watch?v=cTl3U6aSd2w&html5=True
- Non-HTML5 video - http://www.youtube.com/watch?v=cTl3U6aSd2we
Thanks! -
Support Community
We recently configured a stack of four 48 port 3750-x switches . We are noticing high CPU usage. "Hulc LED process" seems pretty high.
This has coincided with VMware servers getting slow and non-responsive at times, perhaps a coincidence, not sure.
Below I provided some outputs that might help to diagnose it
Thanks
John
System image file is "flash:/c3750e-ipbasek9-mz.122-58.SE2/c3750e-ipbasek9-mz.122-58.SE2.bin"
Show inventory output
NAME: "1", DESCR: "WS-C3750X-48"
PID: WS-C3750X-48T-S , VID: V02 ,
NAME: "Switch 1 - Power Supply 0", DESCR: "FRU Power Supply"
PID: C3KX-PWR-350WAC , VID: V02L ,
NAME: "2", DESCR: "WS-C3750X-48"
PID: WS-C3750X-48T-S , VID: V02
NAME: "Switch 2 - Power Supply 0", DESCR: "FRU Power Supply"
PID: C3KX-PWR-350WAC , VID: V02D ,
NAME: "3", DESCR: "WS-C3750X-48"
PID: WS-C3750X-48T-S , VID: V02
NAME: "Switch 3 - Power Supply 0", DESCR: "FRU Power Supply"
PID: C3KX-PWR-350WAC , VID: V02L ,
NAME: "4", DESCR: "WS-C3750X-48"
PID: WS-C3750X-48T-S , VID: V02
NAME: "Switch 4 - Power Supply 0", DESCR: "FRU Power Supply"
PID: C3KX-PWR-350WAC , VID: V02L ,
SWITCH#sh processes cpu sorted
CPU utilization for five seconds: 61%/5%; one minute: 50%; five minutes: 49%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
168 260466386 44948517 5794 14.53% 13.98% 13.70% 0 Hulc LED Process
231 97586088 27253906 3580 4.95% 4.73% 4.64% 0 Spanning Tree
213 63106121 154928892 407 4.15% 3.89% 3.91% 0 IP Input
284 70113217 34537588 2030 3.51% 3.98% 4.17% 0 RARP Input
4 6663412 421278 15817 3.03% 0.43% 0.32% 0 Check heaps
374 9872291 10805181 913 3.03% 0.77% 0.62% 0 IP SNMP
376 11142951 5370604 2074 3.03% 0.73% 0.66% 0 SNMP ENGINE
12 35389011 32152175 1100 2.87% 2.08% 2.20% 0 ARP Input
128 34962407 3622140 9652 2.07% 1.69% 1.63% 0 hpm counter proc
85 49034286 8536062 5744 1.91% 2.44% 2.44% 0 RedEarth Tx Mana
107 25127806 46459053 540 1.27% 1.10% 0.93% 0 HLFM address lea
174 2412 1714 1407 0.95% 0.39% 0.25% 1 SSH Process
220 6423643 12634764 508 0.79% 0.70% 0.56% 0 ADJ resolve proc
181 6913179 2890070 2392 0.63% 0.31% 0.36% 0 HRPC qos request
375 1681949 5000777 336 0.47% 0.08% 0.07% 0 PDU DISPATCHER
84 10180707 12623537 806 0.47% 0.30% 0.37% 0 RedEarth I2C dri
1
666666096996666666666666659666667666666666666666666766676666666656666666
249363098992351145264823289455360612252332233522344115537230141392553343
100 ** ** *
90 ** ** *
80 ** ** *
70 * * ***** * * * * * ** *** * * * **** **
60 **********************************************************************
50 ######################################################################
40 ######################################################################
30 ######################################################################
20 ######################################################################
10 ######################################################################
0....5....1....1....2....2....3....3....4....4....5....5....6....6....7..
0 5 0 5 0 5 0 5 0 5 0 5 0
CPU% per hour (last 72 hours)
* = maximum CPU% # = average CPU%
455555555554444444444555554444455555555555555555555444444444
922222111118888866666000009999911111555554444422222444448888
100
90
80
70
60 *****
50 *************************************************** **
40 **********************************************************
30 **********************************************************
20 **********************************************************
10 **********************************************************
0....5....1....1....2....2....3....3....4....4....5....5....6
0 5 0 5 0 5 0 5 0 5 0
CPU% per second (last 60 seconds)
565756555555555555555555555555555556555555555555565555565556
518841757869248569271526666733778330496833777819929379701861
100
90
80 *
70 *
60 **** ******* **** * * ***** *** * *** **** **** **** *
50 ##########################################################
40 ##########################################################
30 ##########################################################
20 ##########################################################
10 ##########################################################
0....5....1....1....2....2....3....3....4....4....5....5....6
0 5 0 5 0 5 0 5 0 5 0
CPU% per minute (last 60 minutes)
* = maximum CPU% # = average CPU%Thanks to all for your replies.
Jeff
I was aware of the many ACLs however we used to have the same ACLs in a previous 3750G stack about 2 weeks ago and we never had this issue. I agree I need to optimize them and do somehing because it is reaching its max before the CPU starts processing them but I am not certain this is what is causing the issue.
Nikolay,
I am trying to understand "interrupts" with the analysis of the outputs I posted. Here is another output deom the link you provided. Please post your thoughts if you can.
This switch also serves as a gateway(L3 role) for many systems. Would it make sense to offload that responsability from this switch and let an actual router do it?
Thanks
Johnny
show controllers cpu-interface
ASIC Rxbiterr Rxunder Fwdctfix Txbuflos Rxbufloc Rxbufdrain
ASIC0 0 0 0 0 0 0
ASIC1 0 0 0 0 0 0
ASIC2 0 0 0 0 0 0
HOL Fix Counts
No Fixes: 0 Added: 0 In Use: 0 Both: 0
CPU Heartbeat Statistics
Tx Success Tx Fail 1st Thr 2nd Thr Unthr RetryCtMax
37139562 0 0 0 0 1
Rx Delay
0 1 2 3 4
37139562 0 0 0 0
AddlDelay AdvanceCnt
0 0
Rx Retries by RetryCount
0 1 2 3 4 5 6
37139562 0 0 0 0 0 0
7 8 9
0 0 0
AddlRetry
0
cpu-queue-frames retrieved dropped invalid hol-block stray
rpc 104077409 0 0 0 0
stp 19189469 0 0 0 0
ipc 11093838 0 0 0 0
routing protocol 141021559 0 0 0 0
L2 protocol 230347 0 0 0 0
remote console 17 0 0 0 0
sw forwarding 257436702 0 0 0 0
host 21146276 0 0 0 0
broadcast 332154608 0 0 0 0
cbt-to-spt 0 0 0 0 0
igmp snooping 2796987 0 0 0 0
icmp 90752156 0 0 0 0
logging 0 0 0 0 0
rpf-fail 0 0 0 0 0
dstats 0 0 0 0 0
cpu heartbeat 37139562 0 0 0 0
cpu-queue static inuse static added
rpc 0 0
stp 0 0
ipc 0 0
routing protocol 0 0
L2 protocol 0 0
remote console 0 0
sw forwarding 0 0
host 0 0
broadcast 0 0
cbt-to-spt 0 0
igmp snooping 0 0
icmp 0 0
logging 0 0
rpf-fail 0 0
dstats 0 0
cpu heartbeat 0 0
Supervisor ASIC receive-queue parameters
queue 0 maxrecevsize 7E0 pakhead 5505A88 paktail 54655A8
queue 1 maxrecevsize 7E0 pakhead 5689164 paktail 5687F54
queue 2 maxrecevsize 7E0 pakhead 5547AA4 paktail 554719C
queue 3 maxrecevsize 7E0 pakhead 5DC233C paktail 5DBA4CC
queue 4 maxrecevsize 7E0 pakhead 56A7198 paktail 56A7AA0
queue 5 maxrecevsize 7E0 pakhead 5D61304 paktail 5D72F80
queue 6 maxrecevsize 7E0 pakhead 5D856D4 paktail 5D989E4
queue 7 maxrecevsize 7E0 pakhead 5BDE29C paktail 5BDC784
queue 8 maxrecevsize 7E0 pakhead 5CC00A8 paktail 5CB3574
queue 9 maxrecevsize 7E0 pakhead 59DD86C paktail 59DD86C
queue A maxrecevsize 7E0 pakhead 59BF43C paktail 59C13D8
queue B maxrecevsize 7E0 pakhead 5DD18A0 paktail 5DCE6F4
queue C maxrecevsize 7E0 pakhead 59E9CBC paktail 5A049B8
queue D maxrecevsize 7E0 pakhead 59D8EA0 paktail 59DD25C
queue E maxrecevsize 0 pakhead 0 paktail 0
queue F maxrecevsize 7E0 pakhead 59A7080 paktail 59A6BFC
Supervisor ASIC exception status
Receive overrun 00000000 Transmit overrun 00000000
FrameSignatureErr 00000000 MicInitialize 00000002
BadFrameErr 00000000 LenExceededErr 00000000
BadJumboSegments 00000000
Supervisor ASIC Mic Registers
MicDirectPollInfo 80000200
MicIndicationsReceived 00000000
MicInterruptsReceived 00000009
MicPcsInfo 0000001F
MicPlbMasterConfiguration 00000000
MicRxFifosAvailable 00000000
MicRxFifosReady 0000BFFF
MicTimeOutPeriod: FrameTOPeriod: 00000EA6 DirectTOPeriod: 00004000
MicTransmFramesCopied 00000003
MicTxFifosAvailable 0000000E
MicConfiguration: Conf flag: 00000110 Interrupt Flag: 00000008
MicReceiveFifoAssignmen Queue 0 - 7: 33333333 Queue 8 - 15:33333333
MicReceiveFramesReady: FrameAvailable: 00000181 frameAvaiMask: 00000000
MicException:
Exception_flag 00000000
Message-1 00000000
Message-2 00000000
Message-3 00000000
MicIntRxFifo:
ReadPtr 000005C0 WritePtr 000005C0
WHeadPtr 000005C0 TxFifoDepth C0000800
MicIntTxFifo:
ReadPtr 00000728 WritePtr 00000728
WHeadPtr 00000728 TxFifoDepth C0000800
MicDecodeInfo:
Fifo0: address: 03FF4000 asic_num: 00000100
Fifo1: address: 03FF4400 asic_num: 00000101
MicTransmitFifoInfo:
Fifo0: StartPtrs: 0E2CE800 ReadPtr: 0E2CEBE8
WritePtrs: 0E2CEBE8 Fifo_Flag: 8A800800
Weights: 001E001E
Fifo1: StartPtrs: 0E02D000 ReadPtr: 0E02D138
WritePtrs: 0E02D138 Fifo_Flag: 89800400
Weights: 000A000A
MicReceiveFifoInfo:
Fifo0: StartPtr: 0E4AF000 ReadPtr: 0E4AF2A8
WritePtrs: 0E4AF308 Fifo_Flag: 8B000FA0
writeHeaderPtr: 0E4AF308
Fifo1: StartPtr: 0E78C000 ReadPtr: 0E78C2E8
WritePtrs: 0E78C2E8 Fifo_Flag: 89800400
writeHeaderPtr: 0E78C2E8
Fifo2: StartPtr: 0E744800 ReadPtr: 0E744A70
WritePtrs: 0E744A70 Fifo_Flag: 89800400
writeHeaderPtr: 0E744A70
Fifo3: StartPtr: 0EBD1000 ReadPtr: 0EBD13B8
WritePtrs: 0EBD13B8 Fifo_Flag: 89800400
writeHeaderPtr: 0EBD13B8
Fifo4: StartPtr: 0E7D3800 ReadPtr: 0E7D3A58
WritePtrs: 0E7D3A58 Fifo_Flag: 89800400
writeHeaderPtr: 0E7D3A58
Fifo5: StartPtr: 0EB40600 ReadPtr: 0EB40688
WritePtrs: 0EB40688 Fifo_Flag: 88800200
writeHeaderPtr: 0EB40688
Fifo6: StartPtr: 0EB87400 ReadPtr: 0EB874F0
WritePtrs: 0EB874F0 Fifo_Flag: 89800400
writeHeaderPtr: 0EB874F0
Fifo7: StartPtr: 0E880000 ReadPtr: 0E880E20
WritePtrs: 0E881520 Fifo_Flag: 8C001900
writeHeaderPtr: 0E881520
Fifo8: StartPtr: 0EB1A600 ReadPtr: 0EB1A770
WritePtrs: 0EB1A780 Fifo_Flag: 880001F0
writeHeaderPtr: 0EB1A780
Fifo9: StartPtr: 0E2E0CD8 ReadPtr: 0E2E0CD8
WritePtrs: 0E2E0CD8 Fifo_Flag: 82800008
writeHeaderPtr: 0E2E0CD8
Fifo10: StartPtr: 0E81D000 ReadPtr: 0E81D1D8
WritePtrs: 0E81D1D8 Fifo_Flag: 88800200
writeHeaderPtr: 0E81D1D8
Fifo11: StartPtr: 0E4AEF00 ReadPtr: 0E4AEF60
WritePtrs: 0E4AEF60 Fifo_Flag: 86800080
writeHeaderPtr: 0E4AEF60
Fifo12: StartPtr: 0E84A000 ReadPtr: 0E84A300
WritePtrs: 0E84A000 Fifo_Flag: 89000100
writeHeaderPtr: 0E84A000
Fifo13: StartPtr: 0E4AEE00 ReadPtr: 0E4AEE00
WritePtrs: 0E4AEE00 Fifo_Flag: 86800080
writeHeaderPtr: 0E4AEE00
Fifo14: StartPtr: 00000000 ReadPtr: 00000000
WritePtrs: 00000000 Fifo_Flag: 00800000
writeHeaderPtr: 00000000
Fifo15: StartPtr: 0E02CEC0 ReadPtr: 0E02CED0
WritePtrs: 0E02CED0 Fifo_Flag: 84800020
writeHeaderPtr: 0E02CED0
===========================================================
Complete Board Id:0x00B2
=========================================================== -
NSPIbind process High CPU usage
Hi all,
We have a exchange forest and 3 sub domains in that forest. In total we have around the 34000 mailboxen.
No we experience problems with all the domain controllers (also GC) that they have huge cpu usage. when we run a AD diagnostic in the perfmon we see that the LSASS is a part of the problemen and a process called NSPIbind (name service provider interface?).
When I try to look for people with simulair issues there is just one other person with this problem..
http://social.technet.microsoft.com/Forums/exchange/en-US/7c35986b-803e-49e5-a342-b80779c27e8d/high-lsassexe-on-windows-2008-r2-sp1-global-catalog-servers?forum=exchange2010hosters
We also tried his suggestions but there is no improvement.
We need help....
- Windows 2008 R2
- Exchange 2010
- 1 forest, 3 domains (8 domain controllers, all GC)Hi Sader82,
Based on your description, I can find that you have refer to a suggestion from a similar question. The hotfix package (KB2500682)
was mentioned. Did you mean you have installed it and enable the NSPI caching feature, however there was no improvement?
In addition, please refer to the following articles and troubleshoot this issue.
Troubleshooting High LSASS CPU Utilization on a Domain Controller (Part 1 of 2)
http://blogs.technet.com/b/askds/archive/2007/08/20/troubleshooting-high-lsass-cpu-utilization-on-a-domain-controller-part-1-of-2.aspx
Troubleshooting High LSASS CPU Utilization on a Domain Controller (Part 2 of 2)
http://blogs.technet.com/b/askds/archive/2007/08/23/troubleshooting-high-lsass-cpu-utilization-on-a-domain-controller-part-2-of-2.aspx
Troubleshooting High CPU Usage on a Domain Controller
http://technet.microsoft.com/en-us/library/bb727054.aspx
By the way, you describe the LSASS is a part of the CPU usage problem. So, please temporarily disable security software and perform a
clean boot in Windows to check if some third-party software conflicts.
Hope this helps.
Best regards,
Justin Gu -
Realtek hd audio high cpu usage
hi i have a hp 2000 notebook this is a new pc and ive been having trouble with the cpu usage and the realtek hd audio driver for some reason if theres sound comming from the speakers or not norton will pop up and tell me theres high cpu usage and every time its realtek hd audio thats causing the problem this program has crashed 10 times in a week i cant play any good games since the audio driver take up so much of the cpuive never known a audio program to use up to 64% of a cpu before and this pc has dual core on it the program causes my pc to lag and crash please help me with finding a answer is there a program that i can use with my laptop instead or is there a way that i can fix this problem i love the laptop but this realtek is a real pain in the butt
Hi,
A
Download correct driver from HP support site for Your model:
Click on Support & Drivers link. (Upper part of this page.)
Choose option: Download drivers and software (and firmware)
In form:
Enter a product name / number
For product provide Your p/n. (How to find correct p/n informations here.)
Click on Go and choose Your correct system.
Find there audio driver.
Disconnect from Internet.
Uninstall from Your system current audio drivers.
Resources:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Restart Your system:
On boot press ' F8 ' and choose ' Safe mode '.
Go to Control Panel -> Devices Manager -> Audio, Video and Games Controllers
and find there Audio card. Click on it with right button of Your mouse and choose uninstall driver.
Restart Your system and this time start it in normally.
Install downloaded audio driver.
If problem will not be solved then:
B
Go to Control Panel -> Devices Manager -> Audio, Video and Games Controllers
and find there IDT audio card. Click on it with right button of Your mouse and choose properties.
Then go to ' Details ' tab and paste here Hardware ID .
Below You've got example how to do it:
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. ** -
ITunes 10.6 has High CPU Usage when switched to Mini Player
iTunes has high CPU usage when switched to mini player. The CPU usage goes to 80-100% when the next song is played in Mini Player. iTunes then stays at high CPU usage.
Upon exiting mini player the CPU usage will drop back to the normal 0-5% levels.
This only happens when playing from the main music library; which my library is at 7089 items, 42.04 GB.
When playing from a smaller playlist such as a smart playlist with about 15 songs in it for example, the CPU usage stays low/normal.Do you have any better luck with that if you update to iTunes 10.6.1.7?
From the notes for the release:
iTunes 10.6.1 provides a number of improvements, including:
• Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view and syncing photos to devices.
• Addresses an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
• Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
• Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.
http://www.apple.com/itunes/download/
Maybe you are looking for
-
Error message when running updates
I keep getting an error message when updating my CS programs. "This update from the internet cannot be completed. Please try again later." I bought a Canon 6D and the Adobe Camera Raw won't work because it isn't the latest version and that it needs t
-
Insufficient data for an Image in smartform as a PDF
Hi Guys, I am sending a smartform by email as a PDF attachment. Everything is working fine, but the logo is not getting displayed. Whenever I am opening the PDF I am getting the pop up as "Insufficient data for an image". Thanks, Nikhil
-
I think that this is a bug in text field!
Hi! Steps: 1.create Frame 2.create text field (textFieldTest1) and add in frame 3.create text field (textFieldTest2) and add in frame. 4. show frame 5.enter some text in textFieldTest1 and stay here. 6.Minimize frame. 7.Open again frame 8.The caret i
-
In our company, liquid glucose deliver to customers in Metal drums which are returnable. Metal drums are of two types i.e. New metal drums and 2nd Hand metal drums. First production department issue new drums for the production of liquid glucose then
-
Hi, i want to convert data from xmii to minitab. I am running server from other system.I am using BLS. In writeFile action, i am giving file path in run time. if i give path as D:\<file name>.mtw means, it stores file in xmii server system's D d