Gnome Crashes on Login after messing with dual monitor settings

Gnome displays the sad monitor and has the error message "..something has gone wrong..~" and will force me to log out. I've only started to experience this after messing with dual monitor settings in nvidia. The dual setup(twinview) worked but once I rebooted, I couldn't get it going for awhile.
Here's my xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 285.05.09 ([email protected]) Fri Sep 23 19:18:19 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
#Option "TwinView" "True"
#Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I commented out below to get it in again, but it still feels shaky and unstable to log in now. Sometimes I will get the error and after a log out and login, it'll work.
#Option "TwinView" "True"
#Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
Extra Notes: I have another desktop session with awesome installed(uninstalled now) and could log into that no problem. Awesome was giving me troubles so I uninstalled it. I have 2 gnome desktop sessions, my regular gnome session(the one that crashes), and the other with no window manager(never crashed on startup).
I installed awesome around the same time as configuring the dual monitor setup.
Thanks.

Update.
The crashes are to be expected now. I'm circumventing the whole thing by logging into my other Gnome session without a window manager, logging out and then logging back into my regular Gnome with Metacity.
I've noticed the tty1 sessions(not sure what's it's called) is strange. Apparently my session runs on tty8 but when I try logging in, it'll crash me and tty7 gives me a blank screen with a blinking underscore. The other tty1s work regularly. Not sure if this has anything to do with it.
Is there a way to just reset the Gnome settings?

Similar Messages

Safari Restoring After Restart With Dual Monitors

I'm on 10.9.4 and for the last few versions of Marvericks, when rebooting Safari never restores itself to the monitor i left it on. It seems to restore to the default. Other than Skype, no other apps exhibit this. I see no other issues with Safari. Anyone experiencing this or similar?

Reading your post full screen mode is working as Apple intended it to. When you set full screen mode on an app that has the ability it makes it full screen on the Mac and any other monitor is left blank while viewing that app. Currently there are no adjustments to change this. I would recommend providing feedback to Apple at www.apple.com/feedback to let them know what you anticipated.

MacBook Messes with my Monitor

Hi,
I'm new to Mac, and this is really wierd.
I'm hooking up a 19inch BenQ monitor to my MacBook via a VGA adaptor I bought with the MacBook Pro.
It detected the external monitor immediately, wonderful. After several hours, however, the monitor went dark. If I unplugged it, and plugged it back in, I'd catch a glimpse of screen, before it went dark again.
I tried plugging the external monitor back into a Windows machine, and had *the same* symptoms!
After unplugging the mains from the monitor and waiting 30secs, I could reconnect it to the mac and everything was fine again.
However, this problem keeps repeating! Somehow the Mac is messing with the monitor, causing it to go dark until I completely unplug it from the mains, allow it some time to loose all it's state, and plug it back in.
What on earth is happening?

I've got a bit closer to the root cause.
If I leave the MBP alone for about half an hour and it shuts down the displays, the external monitor flickers back into life for a moment then goes black (although it's LED still shows it's connected).
After that, nothing but unplugging it from the mains will help.
My god, what bad experience I'm having with Macs so far... over heating, short cuts not working, monitors ceasing to function properly... it's hardly what I expected after shelling out three times as much as I would have for a windoze/linux machine!

Need to launch Organizer Twice to work with Dual Monitors

If I open a project or either Photoshop Elements 10 or PRE10 and then click on Organizer it loads, but sits in the taskbar below. If I hover over it the AERO Windows (Win 7) pops up showing it's loaded. But It will not maximize. This is when I had last used it on a second monitor so I can easily compare before and afters. However, if I right click on it and close it, then reopen it, it launches perfectly in the 2nd monitor. Does this every time. I ussually leave it open all the time now to avoid this but I don't know how sesitive the catalogs are if the system is rebooted for some reason.
I did no specific configuration for dual monitors, Just dragged it over there when I wanted to use it.
Thanks,
Joe..

Hi Joe,
This is a known issue with dual monitors and got to know that Organizer people are tracking it as a bug for now.
Hope this will be fixed soon.
Thanks
andaleeb

Unwanted keyboard shortcut with dual monitors

Problem:
I have a computer setup with dual monitors (desktop extended). When I have a window open, e.g., Microsoft Word 2007, after I type "1" on the keyboard, the Word Window and mouse relocate to the second monitor. When I type "2" the Word window and mouse relocate
to the main monitor. In the word document, 1 and 2 are typed in the document, but pushing the keys still move the window and mouse to the opposing monitor.
I checked the keyboard settings within Windows and found that sticky keys and such are not enabled. The keyboard has no such features to enable. I also checked the display setup in display properties and found nothing that would indicate such a setup. Google
searches return nothing related to my problem.
What I do know:
-The rest of the numbers on the keyboard work fine. Pressing 1 and 2 on the number pad at the far right of the keyboard do not transfer the active window to the second monitor. Those keys work fine.
-The type of window does not matter. Using notepad, word, excel, internet explorer, sticky notes; all of those windows would transfer to the opposing monitor when I push 1 and 2.
Setup:
Windows XP
Dual-Monitor
Wireless Keyboard and mouse

This pertains to StarTech DVI to USB adapters.
There's an icon in your system tray near the clock, either super utility or usb display device. Right click, and select multi display control panel.
10:20:14 AM
There's a button to disable as long as you have the newer driver from their website. The old drivers had a bug that caused this button to not work

I have some old cd's I have burned on itunes. How can I copy them to my iphone without using the cloud? I donot want to mess with my cloud settings because I am a technophobe . Please be gentle.

I have some old cd's I have burned onto itunes. Howcan I copy them to my iphone without using the cloud? I donot want to mess with my cloud settings because I am a technophobe. Please be gentle

Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD) - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
Steven

Run screensaver independently with dual monitors

I was wondering whether, when running OS X with dual monitors, it was possible to run the screensaver on one of the monitors (while still using the other)?
Cheers,
Diego

Nope. Can't do it.

New arch installation, problems with dual monitors

tldr: nvidia setting are not saving when when I leave a session.
yesterday I wiped my computer and went from ubuntu to arch on my desktop (been using arch on laptop for a while). I'm having problems getting my dual monitor settings to save. I configure the settings via nvidia server settings and it works fine but when I go to reboot or log out it goes back down to just one screen and I have reset up nvidia.
gdm has never seen both monitors its always just the single screen.
software
nvidia drivers 280.13
xfce4 v4.8.0
gdm 3.0.4-2
kernal 3.0-arch
my system is up to date with a yaourt -Syu
Sorry if this has been answered but my googlefoo was not strong today.

GDM *should* use a xorg.conf if it exists.... I also noticed that Arch keeps a xorg.conf.d folder, which I'm not sure the nvidia-settings app knows how to handle.
Also, make sure you are running the nvidia-settings app with root privileges, as you'll need those to write a xorg.conf in /etc/X11.

[SOLVED] openbox margins with dual monitors

Hi community,
I have stumbled to a nasty problem on my first incursion to dual monitors in openbox.
I'm using xrandr with this command (which works just fine BTW):
xrandr --output LVDS --mode 1280x800 --primary --output VGA-0 --mode 1280x1024_60.00 --gamma 1.0:1.4:0.85 --right-of LVDS
and have set a Virtual screen in xorg.conf of 2560 x 1024 pixels.
But, my laptop monitor only handles 1280x800, while my external LCD monitor has 1280x1024, so there is a virtual area under my laptop screen which i'm not using, but i dont really care about that.
The problem is that when I'm setting screen margins, so that maximized windows will respect the panels in the bottom (tint2), in rc.xml (or by obconf) the margins are applied to the virtual screen and only are practical on the external monitor wich has more pixel height.
I'm really missing some kind of per monitor margin settings in openbox, maybe there is and i haven't found it? It makes me wonder because openbox can maximize windows to a single monitor, even if the whole layout it's treated like a virtual screen, so it has some way of distinguishing between them.
I would appreciate any suggestions, thanks.
Last edited by andreamer (2010-07-26 18:32:15)

TL;DR - I'm not aware of any acceptable solution at the moment.
Basically, what you're having problems with, is the "dead area." It can really be quite a pain in the butt if window managers or other screen aware applications don't anticipate it properly. To my knowledge, Openbox doesn't support margins on a monitor-by-monitor basis. In reality, you shouldn't need to be setting margins anyway. Tint2 should be reporting itself as a taskbar, and Openbox should be respecting that.
I have dead area too, with multiple monitors, and Openbox respects both of the KDE taskbars I have running (one on each monitor). (I use KDE and simply replaced Kwin with Openbox.) This tells me that tint2 should be able to cooperate with Openbox. I remember trying tint2 a while ago, and didn't fine it adequate in a dual monitor environment (it was probably a year ago or so). tint2 would need to be setting the _NET_WM_STRUT_PARTIAL hint, and I'm not sure if it is (or if it's doing it properly). See http://standards.freedesktop.org/wm-spe … #id2507618
Also, I do know that the developer for Openbox recently got a dual monitor setup, and she's been adding additional support for dual monitors a little at a time. Hopefully with 3.5, there will be a lot more support. (Margin support for multiple monitors would be great, because it could be a good utility knife for applications that don't care about multi-monitors setups and don't set the proper hints.)
If you're capable of modifying tint2, my course of action would be to try something that works (like the KDE taskbars) and record the hints being set there. Then compare them with tint2 and try to mirror KDE's setup. (If you're a programming lacking experience with X and related nonsense, I'd be more than willing to offer what guidance I have.)
Also, I developed a panel myself (and got pretty far along) using the PyGTK toolkit... But I can't remember if I solved this problem or not. I'll try to check it out and get back to you. (I got as far as implementing a widget system that includes a task list, system tray, clock, menus... It just isn't polished very well. My original intention was for it to be a more robust PyPanel with dual monitor support.)
Last edited by BurntSushi (2010-07-24 22:46:23)

Visualise Spots with dual monitors

I'm finding some eratic behaviour when using Visualise Spots with dual monitors.
I have Development open on one window and the Loupe view open on the other. When I click on the Visualise Spots both windows show the visualisation. When I click the button off - both windows switch to normal view - most of the time.
Occasionally it will switch off in the Development view but stay on the Loupe view on the second monitor. It only goes away when I switch to another image.
Is anyone else seeing this behaviour?
Roy

I have found that's it's linked to zoom level.
I can't quite make out what's going on but the behaviour is very strange.
Roy

Interfacing with dual-monitor machine

Hello all--
I've got a G5 at home with dual monitors on which I run 3D animation software with lots of panels. I'd like to be able to control the G5 from work using a laptop (possibly also connected to an external monitor). Is it possible to display both screens of the desktop using ARDv3 on the laptop? Some users have mentioned they can do this but the size of the remote screens is unsatisfactory. So, again, can you visualize both screens well via the remote computer?
Thanks for any help you can offer.

you can view both screens at once but it will be scaled to fit on the screen you have... so what you see is dependent on the resolution of both client monitors and your admin computer's monitor.
you can also select to view a single monitor of the client computer.
i've never run ARD admin on a computer with 2 monitors so i'm not sure how it handles it but i'm guessing that you can view both monitors on both admin monitors.... it'll probably scale down or up dependent on resolution.

Gnome crashes on login

Hi,
my laptop is running on Arch with kernel 3.11.2-1 and I use the current gnome version as desktop environment.
To look closer to an image position of a website i'm currently creating I used the desktop-zoom function provided by gnome. After like 5 seconds gnome crashed and displayed the message: "Oh no! Something has gone wrong. A problem has occurred and the system can't recover. All extensions have been disabled as a precaution." and a logout-button. So i logged out, rebootet my laptop and hoped it would help, but sadly it didn't. So each time I try to log in now I get this message.
So I looked throw dmesg and found this:
systemd-joufnald[121]: Failed to write entry(26 items, 228856444 bytes) despite vaccuming, ignoring: Argument list too long
traps: gnome-shell[1661]: trap int3 ip:7f4fccd6fd3d sp;7fff6ca4ab00 error:0
systemd-journald[121]: Vaccumin done, freed 0 bytes
systemd-journald[121]: Failed to write entry(26 items, 254325372 bytes) despite vaccuming, ignoring: Argument list too long
traps: gnome-shell[1661]: trap int3 ip:7ffaa0780d3d sp:7fff613a1af0 error: 0
I searched the web a bit but couldn't find anything helpfull so far.
Anyone has an idea how to fix this?
Greetings
Dero

Update.
The crashes are to be expected now. I'm circumventing the whole thing by logging into my other Gnome session without a window manager, logging out and then logging back into my regular Gnome with Metacity.
I've noticed the tty1 sessions(not sure what's it's called) is strange. Apparently my session runs on tty8 but when I try logging in, it'll crash me and tty7 gives me a blank screen with a blinking underscore. The other tty1s work regularly. Not sure if this has anything to do with it.
Is there a way to just reset the Gnome settings?

Flash CS3 Crashes with Dual Monitors

Flash CS3 crashes when I have the actions panel open on my
secondary monitor and I close Flash. I have to actual move the
action script panel to the primary monitor or close it completely.
The same thing happens if I try to save my project space with the
actions panel open.
The other issue I have found is that when I open Flash up
again, despite the fact that I have saved my work space profile,
the pallets all appear on my primary monitor and not the secondary
one. Didn't re amend this issue back in Flash 5 or 6?

OK the problem isn't the DUAL Monitors, but rather having a
custom workspace open while trying to close Flash. I have to change
the workspace back to Default or it will not close at all. Any
ideas.

OpenGL freezes computer with dual monitors and fglrx

I am trying to use the fglrx driver, and with a single monitor I seem to have gotten everything working.
However I am running into issues with two monitors. Basically, when I have two monitors any opengl program doesn't run properly.
There are two cases. If I use the xorg.conf generated by "aticonfig --initial", it still seems to detect the other monitor (although there is a black region on my gnome desktop). If an opengl program is run, the screen goes crazy where random pixels are changing different colors. I can end the program, and everything goes back to normal.
Using the program "amdcccle" I generated xorg.conf for dual monitors (I pasted it below). When I use this configuration, any opengl program completely freezes the computer instantly.
I have been looking for a while, but have not found any information that might lead to a solution. Does anyone here have any advice?
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[1]-0" 0 0
EndSection
Section "Monitor"
Identifier "0-DFP1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1680x1050"
Option "TargetRefresh" "60"
Option "Position" "1920 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP10"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Identifier "amdcccle-Device[1]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
Option "Monitor-DFP1" "0-DFP1"
Option "Monitor-DFP10" "0-DFP10"
EndSection
Section "Screen"
Identifier "amdcccle-Screen[1]-0"
Device "amdcccle-Device[1]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 3600 1920
Depth 24
EndSubSection
EndSection

+Sorry. I mean "right" in the last sentence.+
Hello.
I put my second monitor of a dual monitor set-up to the left of the main monitor - the one with the FC application, keyboard and mouse, etc. Trouble is the mouse kept hitting the left hand wall of my main monitor when I tried to send it to the second monitor. After a while I realized the mouse/computer thinks the second monitor is to its right, so I have to exit the right hand side of the main monitor to get to the one on the left.
Is there any way to instruct FC and the mouse that the second monitor is on the left? Can the mouse be instructed to "pass" through the left hand wall of the main monitor rather than the right? Or must the second monitor always go the right of the main monitor?
Thanks.
John

T61 worked with Dual Monitors and now it does not

I'm having trouble getting two monitors to work. They used to work fine. There have been no changes to hardware. Now the DVI monitor is blank. The DVI monitor does work with other computers (I'm working through a KVM switch).
T61 running XP Pro
Docking station
Worked well in the past
Took laptop to a meeting and used VGA and Laptop displaying the same information (needed to fool around with a few things to get that to work (FN-F7, Presentation Director, not really sure what worked)
Came back to docking station and my second monitor does not work anymore.
Control Panel
Shows two monitors (1 Bright, 2 Grayed)
Can select and choose extend on the second monitor (1 Bright, 2 Bright)
Apply reverts to (1 Bright and 2 Grayed)
NVIDIA Control Panel\
Set up multiple displays show choice is Only use one display (Single)
Second monitor choice is grayed
Presentation Director
No option is shown for two monitors
Laptop and monitor choices exist
BIOS Display
Tried Internal and PCI options (no joy with either)
Display is set to VGA & DVI
Any suggestions??

The docking station is a type 2504. I have both the VGA and the DVI port hooked up to identical flat screen monitors. I have no intention of messing with that because the setup is working successfully via a KVM switch. Both ports and both monitors are working. However, there is a problem with swithching modes with the Lenovo laptop. The problem does not exist with any other computer working through the KVM switch.
Please note that:
this Laptop on this docking station, at my home, with all wiring and monitors unchanged, has worked for a long time.
I took the laptop off the docking station, went to a meeting, hooked up to a projector, and successfully configured the laptop such that the laptop screen and the projector were displaying the same screen at the meeting.
Then, I brought the laptop back to the same old docking station at my home and tried to regain use of my dual monitors unsuccessfully.
Using Control Panel display, and all sorts of combinations of NVIDIA Control Panel, the 2nd monitor would not be consistently detected by NVIDIA Control Panel. During these attempts, on a few occasions, I had an option to Set Up Multiple Displays in NVIDIA Control Panel; but there was no success in choosing this option. Returning to NVIDIA Control Panel / Displays would not present Set Up Multiple Displays as a valid option (not present or greyed - can't remember). I even went through permutations with the laptop screen open and closed, warm boots, cold boots, searchign for new hardware, etc. Nothing was successful.
Although changing the display within Windows Control Panel / Display was an option, any attempt to extend or replicate the dispay on the second monitor would fail and Windows Control Panel / Display would go back to the single monitor configuration was not successful and effectively ignored by both Windows Control Panel / Display and NVIDIA Control Panel.
You may note the use of past tense. I simply gave up and went to doing productive work on one monitor. After a few weeks, I went back to NVIDIA Control Panel and the second monitor was detected. I was able to Display / Set-up Multiple Displays via NVIDIA Control Panel. Subseaquently, I was able to use Windows Control Panel Display to enable and configure the second monitor and both monitors started working again (without having made any changes to wiring etc).
I don't believe there is any difference in how I used NVIDIA Control Panel on this successful attempt than in any of the earlier failed attempts. There seems to be some sort of a problem with getting the Lenovo to recognize that the second monitor is really there. Please addess this part of the problem as I expect to repeat the process in an upcoming meeting with this laptop.
Thank you for your attention.

Gnome Crashes on Login after messing with dual monitor settings

Similar Messages

Maybe you are looking for