GNOME | Desktop artifacts when switching from a virtual terminal

When switching from a virtual terminal to the graphical environment I observe artifacts on the desktop. When then I change wallpapers, the artifacts disappear. If I set the display mode for the desktop wallpapers (in the GNOME tweak tool) as “None” the artifacts don't show up at all.
How can I tackle the problem?
GNOME 3.14.2; nvidia 304.125

You answered my expectation en tu previous post.
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Similar Messages

Help! mail dissappears when switching from junk training to automatic mode

I'm a new Mail user recently switched from 20 years of Eudora. I'm using Mail with a standard POP account. I've had no trouble setting up mailboxes and importing my old mail.
I've been using junk filtering in training mode for the past few weeks and want to switch to automatic mode. When I tried doing this, all of my inbox messages suddenly disappeared. I quit mail and rebuilt my inbox and found myself with thousands of duplicated messages. I'm using Andreas Amann's remove duplicates script to clean up my inbox (it's taking forever but working!)
My inbox has about 7000 messages currently. My practice with Eudora has always been to keep the current year in the inbox and archive at the beginning of the new year. I'd like to continue this with Mail.
A couple questions:
1) will rebuilding a mailbox cause duplicates? When should one use rebuild?
2) do I just need to be more patient and let mail do its thing when switching from training mode to automatic?
3) is 7000 messages considered too many for a single mailbox?
Any help much appreciated. Many thanks!
--dhl
Powerbook 15" Aluminum Mac OS X (10.4.8)
Powerbook 15" Aluminum Mac OS X (10.4.5)
Powerbook 15" Aluminum Mac OS X (10.4.5)

1) will rebuilding a mailbox cause duplicates?
No.
When should one use rebuild?
This question doesn’t have a simple answer in the case of Mail 2.x and POP accounts.
2) do I just need to be more patient and let mail do its thing
when switching from training mode to automatic?
I think so.
3) is 7000 messages considered too many for a single mailbox?
There is a limit on the overall size of individual mailboxes rather than on the number of messages stored in them -- see Overstuffed mailbox is unexpectedly empty.

Upgraded to 4 and have noticed that when switching from page to page you get an annoying blink before the next page displays. Any suggestions?

When switching from tab to tab, Firefox 4 has a tendency to blink before displaying the new tab. Just a millisecond or so but can be annoying.

If that doesn't work, try power cycling your router, printer, and your iPad/iPhone in that order. To do this, follow these steps:
Unplug the router and printer from the power and shut off the i-devices. Let them sit for about 30 seconds and then plug just the router in.
Once the router is completely back online (usually takes about 30-60 seconds) plug the printer in. Wait until it is back on its home screen.
Turn the i-devices on.
Try to print again.
Let me know if this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

DW CS3 Crashes When Switching from Design View to Code View

The page opens in code view, and when I try to switch to
either split or design view, the application freezes.

read my reply
Date: Thu, 30 May 2013 20:27:49 -0700
From: [email protected]
To: [email protected]
Subject: dreamweaver cs6 crashes when switching from design to live view
    Re: dreamweaver cs6 crashes when switching from design to live view
    created by Preran in Dreamweaver - View the full discussion
Hi,
Can you try the solutions mentioned in this document?
http://helpx.adobe.com/dreamweaver/kb/crash-live-view-dreamweaver-cs5. html
Thanks,
Preran
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5367198#5367198
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5367198#5367198
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5367198#5367198. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Dreamweaver cs6 crashes when switching from design to live view

dreamweaver cs6 crashes when switching from design to live view

read my reply
Date: Thu, 30 May 2013 20:27:49 -0700
From: [email protected]
To: [email protected]
Subject: dreamweaver cs6 crashes when switching from design to live view
    Re: dreamweaver cs6 crashes when switching from design to live view
    created by Preran in Dreamweaver - View the full discussion
Hi,
Can you try the solutions mentioned in this document?
http://helpx.adobe.com/dreamweaver/kb/crash-live-view-dreamweaver-cs5. html
Thanks,
Preran
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5367198#5367198
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5367198#5367198
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5367198#5367198. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Screen of my desktop hangs when switching to other desktop or mission control

Screen of my desktop hangs when switching to other desktop or mission control. There is tearing of graphics while switchin to different desktops or mission control or while scrolling a webpage. I wish to know the problem and its solution.

I have a Mac Pro 13' and I am using OS X Mavericks.

Blackberry Hub slow when switching from any account to an Exchange Activesync account

I'm experiencing a very slow hub when switching from any account (facebook, LinkedIn, Whatsapp, Gmail, etc...) TO my work email using Exchange Activesync. When switching back from Exchange Activesync TO any other account the issue is noy there. It basically takes a couple of minutes to enter the Exchange Activesync acocunt, and looking at the Device Monitor, CPU section, seems like the Hub process is constantly at 50% CPU usage during this time. This is really causing me lots of issues, as of course I switch between accounts quite frequently. Any suggestions are welcome. Thanks for the support!

I'm having the same issue. What can be causing it.
It was fine using a Z30 until 10.3.1.1865 was recently updated.
Switching between all other accounts is fine just when going to my exchange account (or the main hub view)

HT4993 when switching from my htc evo to the iphone 4s they said all my photos and videos would transfer over time, but after 6 hours still nothing has transfered. Anybody have this issue or know what I can do so I won't lose all my pictures and videos

When switching from HTC evo to iphone 4s on sprint service the attendant said all my music, photos, and videos would transfer after some time. Does anyone know if this is true, or has anyone had this issue happen to them? It has been 8 hours since the switch and only my contacts transferred right away.

Well i wouldn't see why your photo's, videos and music would trasnfer. As that is a android device, there is no way to have them transfer over the air to the iphone.
Contacts probably came from google. Your videos and such you would have to move them to PC then to the iphone. Same with your music.

Outlook 2010 disconnects when switching from wired to wireless

A Windows 7 Pro 64bit laptop with Outlook 2010 keeps disconnecting from the exchange when switching from wired to wireless or vice versa. Then it wont reconnect. Restarting Outlook occasionaly works, not all the time.
Holding CTRL and clicking the Outlook symbol in the notifcation area they connection status and reconnect doesn't work either.
The only way it will reconnect apart from restarting the machine is to restart the Microsoft Exchange Information Store service on our Exchange server.
Any ideas?
Thanks,
JagJag363

Hi,
Since there is a period of time without any respond, I will
temporary mark the reply as answer to closed this thread.
And if you come back to find it doesn't work for you, please reply to us and unmark the answer, this thread will be re-opened.
Sincerely,
Max Meng
Sincerely,
Max Meng
Come back and mark the replies as answers if they help and unmark them if they provide no help.

Photoshop 9 Deactivating When Switching From Boot Camp to Parallels....?

I have Adobe Photosop Elements 9 on my macbook, which I use both in native Boot Camp and in Parallels. I keep getting a window which says "this serial number has already been activated on two machines, please deactivate one of the other machines and retry, or purchase a new licence". The same copy is installed on my home PC. Presumably whenever I switch from Parallels to Boot Camp or vice versa, the Adobe licence check recognises the macbook in its new mode as a third machine, when in fact it is the same BootCamped copy of windows that i am running under parallels. How do I make Photoshop 9 see my macbook as the same machine, whether under Parallels or BootCamp ?

Randall P wrote:
I just installed Boot Camp and Windows XP, and things seem to be working well. I'm planning on buying Parallels so I can avoiding rebooting between the two. Do I need to, or should I uninstall Boot Camp? Can I drag the Boot Camp icon to trash to gain back that hard disk capacity?
You can tell Parallels to use your Bootcamp installation as the virtual machine. You don't need to do anything with Bootcamp then but access it from Parallels. No need to uninstall it. You then can access your Windows without rebooting, or if you want to you still have the option to boot into bootcamp whenever you get the urge to do so.
No you can't just drag the Bootcamp partition to the trash.

Unicode goes messy when switching from terminal to X and backwards.

This happens in my OU Linux (locale - RU) installation over virtualbox in Win7. The same is at over 10 other computers.
Steps to reproduce:
*assume, we are in X now.
1. ctrl-alt-f1 to switch to terminal.
2. Then write some unicode to the screen, for example `man ls` (it is in cyrillic, 'cuz the locale is RU).
3. ctrl-alt-f7 to go to the X enironment.
3. ctrl-alt-f1 to go to the terminal again.
4. now we see, that the unicode support goes down.
Temporary fix: do `unicode_start` each time after coming back to terminal.
Any ideas to permanent or auto-fix?

The Linux kernel includes a bare bones keyboard and screen driver for the console. The keyboard driver sends characters to an application, the application requests from the screen driver some output on the display, and in the path from the keyboard driver to the application and further to the screen driver, the characters are nothing but codes. And since in the end we want to see their little pictures (glyphs) on the screen there must be a way to associate the glyphs with those codes - font.
There are two screen modes, single byte mode and UTF-8 mode. By issuing: unicode_start you switch both keyboard and console to UTF-8. In UTF-8 mode, the bytes received from the application and to be written to the screen are interpreted as a UTF-8 sequence, turned into unicodes and looked up in the unimap to determine the glyph to use.
That's why I thought vt.default_utf8=1 kernel parameter might help. Well, if it does not, sorry, I don't have any better idea. Perhaps someone else will have a better answer.
I'm not sure if the below still applies to Xorg:
http://www.faqs.org/docs/Linux-HOWTO/Keyboard-and-Console-HOWTO.html#s7
XFree86 1.3 saves the fonts loaded in the character ROMs when started, and restores it on a console switch. Thus, the result of setfont on a Virtual Terminal is wiped out when you go to X and back. Using setfont under X will lead to funny results.
I know I can use terminal from X, but as this bug present, it should be fixed.From what I can gather the switching to the VT text console is a meant to be a lightweight terminal for the purpose of troubleshooting. As such, the current behavior could be desired. The user configurable files to maintain the Linux system are all US-ASCII.
Edited by: waldorfm on Oct 27, 2010 5:50 AM

[SOLVED] Acpid prints an error on tty when switching from X

First of I am using Openrc and eudev. I set up acpi and noticed that it prints error (posted below) to tty. It also shows the error when I press ctrl+alt+F10 even though tty number 10 is not spawned. Everything seems to work, it is just anoyin gand gets in a way. The same error is not shown in terminal emulator running X.
The exact error:
acpid: client 1302[0:100] has disconnected.
I just noticed it prints this error every time I switch from X to tty. And it prints the error to that tty. So if I swithc 5 time to tty2 and 3 times to tty5, I'd see the mesage 5 times on tty2 and 3 times on tty3.
EDIT:
Dmesg:
dmesg | pt acpi :(
:120:[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
:121:[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
:122:[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
:123:[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
:124:[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
:254:[ 0.123472] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
:280:[ 0.189051] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
:281:[ 0.189128] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
:282:[ 0.189198] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
:408:[ 0.217413] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
Acpi handler.sh:
#!/bin/bash
# Default acpi script that takes an entry for all actions
case "$1" in
button/power)
case "$2" in
PBTN|PWRF)
logger 'PowerButton pressed'
poweroff # The only added line
logger "ACPI action undefined: $2"
esac
button/sleep)
case "$2" in
SLPB|SBTN)
logger 'SleepButton pressed'
logger "ACPI action undefined: $2"
esac
ac_adapter)
case "$2" in
AC|ACAD|ADP0)
case "$4" in
00000000)
logger 'AC unpluged'
00000001)
logger 'AC pluged'
esac
logger "ACPI action undefined: $2"
esac
battery)
case "$2" in
BAT0)
case "$4" in
00000000)
logger 'Battery online'
00000001)
logger 'Battery offline'
esac
CPU0)
*) logger "ACPI action undefined: $2" ;;
esac
button/lid)
case "$3" in
close)
logger 'LID closed'
open)
logger 'LID opened'
logger "ACPI action undefined: $3"
esac
logger "ACPI group/action undefined: $1 / $2"
esac
# vim:set ts=4 sw=4 ft=sh et:
EDIT2:
Workaround (far from ideal solution):
X recognizes the powerbutton as XF86Poweroff, sosetting a bindkey for poweroff workswhile I'm in X. Could this way of doing things be more violent on shutdown compared to acpid's way of doing it? Are the same scripts run at shutdown in bot cases (those that show in openrc's shutdown run level)?
Last edited by bstaletic (2014-11-07 19:59:44)

Hi bstaletic,
If I understand correctly, you are having some acpi errors (or do you mean acpid)..
Here are the packages my side:
$ pacman -Qs acpi
local/acpi 1.7-1
Client for battery, power, and thermal readings
local/acpid 2.0.23-2
A daemon for delivering ACPI power management events with netlink support
local/acpid-openrc 20141107-1 (openrc openrc-desktop)
OpenRC acpid init script
I dont think I am having errors..
$ dmesg | grep acpi
(gives no output)
I use a display manager (lxdm) to start X.
Edit-
$ rc-status
Runlevel: default
dbus [ started ]
wicd [ started ]
netmount [ started ]
metalog [ started ]
acpid [ started ]
consolekit [ started ]
cronie [ started ]
alsasound [ started ]
local [ started ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed
xdm-setup [ started ]
Dynamic Runlevel: manual
Last edited by aaditya (2014-11-07 19:52:47)

MBP Late 2009 Freezing when switching from app to app (i.e. Safari to iTunes)

For the first time yesterday, my MBP Late 2009 started giving me the spinning color wheel for about 1-2 minutes when I would switch from application to application (Safari, to iTunes) So I held the power button to shut it down, and when I turned it back on it just stayed at the blue screen. THen when I finally got it back on, my desktop background was gone and now I can't open my Microsoft Word, it automatically shuts down saying there was an error. Please, any help would be GREAT!

jlewis7 wrote:
Tried it, and it wont work. Now my computer won't even shut down....any other solutions?
Have you tried force quitting the Finder? Doing this will force your computer to restart. If this works try -
Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
If the above does not work and you have Apple Care, call them. Otherwise, take the computer to an Apple store or an AASP. Whichever is more convenient for you.

Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
ErrorCode: -17600,
Failed to load a required step's associated module.
LabVIEW Run-Time Engine version 9.0.1f3.
When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
My TestStand Engine Version is 2012 f1 (5.0.0.262).
I'd appreciate any help on this issue.
Roman

Hi Roman,
There are a couple of things you can try:
1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
Check if the simple VI is loadable and runs without errors in TestStand.
If the step generates the same error, you should try a re-install of the LabVIEW development system.
If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
    Right-click "Build Specifications" and choose "New->Application(EXE)".
    In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
    Save the properties.
    Right-click on the newly created build specification and choose Build.
Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
Regards,
TRJ

Dreamweaver CC crashes when switching from code view to design view

I am experiencing a recent problem with a file I am currently working. When I switch from code view to design view Dreamweaver crashes and requests a shut down. Other files seem to work without a problem. This particular files has 3 cascading EdgeAnimation CC files that are selected by media queries. I can test the page online without a problem but not in design or live view.

Since your new page didn't crash, this leads me to believe that you have some critical errors and/or conflicts in your other page(s).
Try running your code through the W3C validation tools.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Also debug JavaScript.
JavaScript - http://www.jslint.com/
Nancy O.

GNOME | Desktop artifacts when switching from a virtual terminal

Similar Messages

Maybe you are looking for