..gnome doesn't start after first screen [SOLVED]

Good morning to everybody.
Yesterday night I have solved the problem: I don't know which is the resolution among the following, but gnome today starts also if a lvm gives me an error at the prompt:
1. I have changed inittab adding x:5:once/opt/.....gnome-session
2. change .xinitrc with the command echo ....so I have only gnome-session in xinitrc.
Thanks.
Luca.

...I have tried to launch gnome-session under xfce4 WM.
It starts but stop it after the first charging with this warning:
Host name lookup failure on local host.
In addition, it give me:
Si è verificato un errore durante l'avvio del demome delle impostazioni di GNOME.
Alcuni aspetti come temi, suoni o impostazioni dello sfondo potrebbero non funzionare correttamente.
Il demone delle impostazioni è stato riavviato troppe volte.
L'ultimo messaggio di errore è stato:
Child process did not give an error message, unknown failure occurred
GNOME tenterà di riavviare il demone delle impostazioni al prossimo login.
sorry if it is in italian.
Ciao.
Luca.

Similar Messages

  • ...gnome doesn't start after the first screen..

    Dear all,
    I am in difficult because I have installed Gnome ant it doesn't work.
    When I launch gnome-session from .xinitrc "..exec gnome-session", the foot of gnome 2.6 appears, but it finishes to work with the clock of the mouse switch-on.
    I attached the log at the end of this page.
    Onother problem.
    Is it correct my hosts configuration?
    If i change it, xfce4 doesn't work correctly (keyboard doesn't work under firefox....).
    Please, help me.
    Thanks.
    Luca.
    hosts.
    # /etc/hosts: static lookup table for host names
    #<ip-address>    <hostname.domain.org>    <hostname>
    # 127.0.0.1       localhost.localdomain   localhost
    192.168.1.37    localhost.localdomain    localhost
    # 192.168.1.37    luca1
    # End of file
    log
    XFree86 Version 4.4.0
    Release Date: 29 February 2004
    X Protocol Version 11, Revision 0, Release 6.6
    Build Operating System: Linux 2.6.4 i686 [ELF]
    Current Operating System: Linux Luca1 2.6.5 #1 SMP Mon Apr 5 01:03:13 PDT 2004 i686
    Build Date: 01 April 2004
    Changelog Date: 29 February 2004
    Before reporting problems, check http://www.XFree86.Org/
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/XFree86.0.log", Time: Fri Apr 23 13:16:10 2004
    (==) Using config file: "/etc/X11/XF86Config"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "laptop"
    (**) | |-->Device "ATI Radeon 9000"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xfree86"
    (**) XKB: rules: "xfree86"
    (**) Option "XkbModel" "pc105"
    (**) XKB: model: "pc105"
    (**) Option "XkbLayout" "it"
    (**) XKB: layout: "it"
    (**) Option "XkbVariant" "nodeadkeys"
    (**) XKB: variant: "nodeadkeys"
    (==) Keyboard: CustomKeycode disabled
    (WW) The directory "/usr/X11R6/lib/X11/fonts/freefont/" does not exist.
    Entry deleted from font path.
    (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
    (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
    (==) ModulePath set to "/usr/X11R6/lib/modules"
    (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
    (II) Module ABI versions:
    XFree86 ANSI C Emulation: 0.2
    XFree86 Video Driver: 0.7
    XFree86 XInput driver : 0.4
    XFree86 Server Extension : 0.2
    XFree86 Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
    (II) Module bitmap: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/X11R6/lib/modules/libpcidata.a
    (II) Module pcidata: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.7
    (--) using VT number 7
    (II) PCI: Probing config type using method 1
    (II) PCI: Config type is 1
    (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1039,0646 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:02:0: chip 1039,0962 card 0000,0000 rev 04 class 06,01,00 hdr 80
    (II) PCI: 00:02:1: chip 1039,0016 card 0000,0000 rev 00 class 0c,05,00 hdr 00
    (II) PCI: 00:02:3: chip 1039,7007 card 1584,7007 rev 00 class 0c,00,10 hdr 00
    (II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev 00 class 01,01,80 hdr 00
    (II) PCI: 00:02:6: chip 1039,7013 card 1584,4003 rev a0 class 07,03,00 hdr 00
    (II) PCI: 00:02:7: chip 1039,7012 card 1584,5203 rev a0 class 04,01,00 hdr 00
    (II) PCI: 00:03:0: chip 1039,7001 card 1584,7001 rev 0f class 0c,03,10 hdr 80
    (II) PCI: 00:03:1: chip 1039,7001 card 1584,7001 rev 0f class 0c,03,10 hdr 00
    (II) PCI: 00:03:2: chip 1039,7001 card 1584,7001 rev 0f class 0c,03,10 hdr 00
    (II) PCI: 00:03:3: chip 1039,7002 card 1584,7002 rev 00 class 0c,03,20 hdr 00
    (II) PCI: 00:04:0: chip 1039,0900 card 1584,5002 rev 91 class 02,00,00 hdr 00
    (II) PCI: 00:08:0: chip 1217,6972 card 4001,0000 rev 00 class 06,07,00 hdr 02
    (II) PCI: 01:00:0: chip 1002,4c66 card 1584,2302 rev 01 class 03,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
    (II) Bus 1 I/O range:
    [0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xd7e00000 - 0xd7efffff (0x100000) MX[B]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xc7c00000 - 0xd7cfffff (0x10100000) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) PCI-to-CardBus bridge:
    (II) Bus 2: bridge is at (0:8:0), (0,2,5), BCTRL: 0x0580 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
    [0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
    [1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0x20800000 - 0x20bfffff (0x400000) MX[B]
    (II) Bus 2 prefetchable memory range:
    [0] -1 0 0x20400000 - 0x207fffff (0x400000) MX[B]
    (--) PCI:*(1:0:0) ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] rev 1, Mem @ 0xc8000000/27, 0xd7ef0000/16, I/O @ 0xa800/8, BIOS @ 0xd7ec0000/17
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI Memory resource overlap reduced 0xdc000000 from 0xdfffffff to 0xdbffffff
    (II) Active PCI resource ranges:
    [0] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
    [1] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
    [2] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
    [3] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
    [4] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
    [5] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
    [6] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
    [7] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
    [8] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
    [9] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
    [10] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
    [11] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
    [12] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
    [13] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
    [14] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
    [15] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
    [16] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
    [17] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
    [1] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
    [2] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
    [3] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
    [4] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
    [5] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
    [6] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
    [7] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
    [8] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
    [9] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
    [10] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
    [11] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
    [12] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
    [13] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
    [14] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
    [15] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
    [16] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
    [17] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
    [6] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
    [7] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
    [8] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
    [9] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
    [10] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
    [11] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
    [12] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
    [13] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
    [14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [17] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
    [18] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
    [19] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
    [20] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
    [21] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
    [22] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
    [23] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
    [24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
    (II) LoadModule: "dbe"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
    (II) Module dbe: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
    (II) Module extmod: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension FontCache
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "type1"
    (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
    (II) Module type1: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.2
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Type1
    (II) Loading font CID
    (II) LoadModule: "speedo"
    (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
    (II) Module speedo: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.1
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Speedo
    (II) LoadModule: "xtt"
    (II) Loading /usr/X11R6/lib/modules/fonts/libxtt.a
    (II) Module xtt: vendor="X-TrueType Server Project & After X-TT Project"
    compiled for 4.4.0, module version = 1.4.2
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font xtt
    (II) LoadModule: "v4l"
    (II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
    (II) Module v4l: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 0.0.1
    ABI class: XFree86 Video Driver, version 0.7
    (II) LoadModule: "glx"
    (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
    (II) Module glx: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading sub module "GLcore"
    (II) LoadModule: "GLcore"
    (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
    (II) Module GLcore: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
    (II) Module dri: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading sub module "drm"
    (II) LoadModule: "drm"
    (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
    (II) Module drm: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "radeon"
    (II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
    (II) Module radeon: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 4.0.1
    Module class: XFree86 Video Driver
    ABI class: XFree86 Video Driver, version 0.7
    (II) LoadModule: "ati"
    (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
    (II) Module ati: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 6.5.6
    Module class: XFree86 Video Driver
    ABI class: XFree86 Video Driver, version 0.7
    (II) LoadModule: "mouse"
    (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
    (II) Module mouse: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    Module class: XFree86 XInput Driver
    ABI class: XFree86 XInput driver, version 0.4
    (II) v4l driver for Video4Linux
    (II) ATI: ATI driver (version 6.5.6) for chipsets: ati, ativga
    (II) R128: Driver for ATI Rage 128 chipsets:
    ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
    ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
    ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
    ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
    ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
    ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
    ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
    ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
    ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
    ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
    ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
    ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
    ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
    ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
    ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
    ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
    ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
    ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
    ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
    ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
    ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
    ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
    ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
    ATI Rage 128 Pro ULTRA TU (AGP?)
    (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330/340/350 (A4) 4137,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
    ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP),
    ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon 9200PRO 5960 (AGP), ATI Radeon 9200 5961 (AGP),
    ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
    ATI FireGL RV360 AV (AGP), ATI Radeon Mobility 9600 (M10) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2 (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP)
    (II) Primary Device is: PCI 01:00:0
    (--) Chipset ATI Radeon Mobility 9000 (M9) Lf (AGP) found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
    [6] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
    [7] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
    [8] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
    [9] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
    [10] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
    [11] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
    [12] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
    [13] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
    [14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [17] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
    [18] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
    [19] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
    [20] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
    [21] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
    [22] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
    [23] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
    [24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
    (II) Loading sub module "radeon"
    (II) LoadModule: "radeon"
    (II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o
    (II) resource ranges after probing:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
    [6] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
    [7] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
    [8] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
    [9] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
    [10] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
    [11] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
    [12] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
    [13] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
    [14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
    [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
    [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [20] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
    [21] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
    [22] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
    [23] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
    [24] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
    [25] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
    [26] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
    [27] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
    [28] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
    [29] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (II) RADEON(0): MMIO registers at 0xd7ef0000
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/X11R6/lib/modules/libvgahw.a
    (II) Module vgahw: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.7
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (**) RADEON(0): Option "AGPMode" "4"
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
    (II) Module int10: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.7
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (--) RADEON(0): Chipset: "ATI Radeon Mobility 9000 (M9) Lf (AGP)" (ChipID = 0x4c66)
    (--) RADEON(0): Linear framebuffer at 0xc8000000
    (--) RADEON(0): BIOS at 0xd7ec0000
    (--) RADEON(0): VideoRAM: 65536 kByte (128 bit DDR SDRAM)
    (II) RADEON(0): AGP card detected
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Loading /usr/X11R6/lib/modules/libddc.a
    (II) Module ddc: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.7
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Loading /usr/X11R6/lib/modules/libi2c.a
    (II) Module i2c: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.2.0
    ABI class: XFree86 Video Driver, version 0.7
    (II) RADEON(0): I2C bus "DDC" initialized.
    (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DDC:ddc2" removed.
    (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DDC:ddc2" removed.
    (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DDC:ddc2" removed.
    (II) RADEON(0): DDC Type: 2, Detected Type: 0
    (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DDC:ddc2" removed.
    (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DDC:ddc2" removed.
    (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DDC:ddc2" removed.
    (II) RADEON(0): DDC Type: 4, Detected Type: 0
    (II) RADEON(0): Non-DDC laptop panel detected
    (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DDC:ddc2" removed.
    (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DDC:ddc2" removed.
    (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DDC:ddc2" removed.
    (II) RADEON(0): DDC Type: 3, Detected Type: 0
    (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DDC:ddc2" removed.
    (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DDC:ddc2" removed.
    (II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DDC:ddc2" removed.
    (II) RADEON(0): DDC Type: 4, Detected Type: 0
    (II) RADEON(0): Displays Detected: Monitor1--Type 2, Monitor2--Type 0
    (II) RADEON(0):
    (II) RADEON(0): Primary Display == Type 2
    (II) RADEON(0): Panel ID string: Samsung LTN150P1-L02
    (II) RADEON(0): Panel Size from BIOS: 1400x1050
    (II) RADEON(0): BIOS provided dividers will be used.
    (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) RADEON(0): Validating modes on Primary head ---------
    (II) RADEON(0): Total number of valid DDC mode(s) found: 0
    (II) RADEON(0): Valid mode using on-chip RMX: 1400x1050
    (II) RADEON(0): Valid mode using on-chip RMX: 1280x1024
    (II) RADEON(0): Valid mode using on-chip RMX: 1024x768
    (II) RADEON(0): Valid mode using on-chip RMX: 800x600
    (II) RADEON(0): Total number of valid FP mode(s) found: 4
    (--) RADEON(0): Virtual size is 1400x1050 (pitch 1408)
    (**) RADEON(0): *Mode "1400x1050": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
    (II) RADEON(0): Modeline "1400x1050" 108.00 1400 34208 34320 1688 1050 1050 1053 1063
    (**) RADEON(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
    (II) RADEON(0): Modeline "1280x1024" 108.00 1280 34208 34320 1688 1024 1050 1053 1063
    (**) RADEON(0): *Mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
    (II) RADEON(0): Modeline "1024x768" 108.00 1024 34208 34320 1688 768 1050 1053 1063
    (**) RADEON(0): *Mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
    (II) RADEON(0): Modeline "800x600" 108.00 800 34208 34320 1688 600 1050 1053 1063
    (**) RADEON(0): Default mode "640x350": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
    (II) RADEON(0): Modeline "640x350" 108.00 640 34208 34320 1688 350 1050 1053 1063
    (**) RADEON(0): Default mode "640x400": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
    (II) RADEON(0): Modeline "640x400" 108.00 640 34208 34320 1688 400 1050 1053 1063
    (**) RADEON(0): Default mode "720x400": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
    (II) RADEON(0): Modeline "720x400" 108.00 720 34208 34320 1688 400 1050 1053 1063
    (**) RADEON(0): Default mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
    (II) RADEON(0): Modeline "640x480" 108.00 640 34208 34320 1688 480 1050 1053 1063
    (**) RADEON(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
    (II) RADEON(0): Modeline "1152x864" 108.00 1152 34208 34320 1688 864 1050 1053 1063
    (**) RADEON(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
    (II) RADEON(0): Modeline "1280x960" 108.00 1280 34208 34320 1688 960 1050 1053 1063
    (**) RADEON(0): Default mode "832x624": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
    (II) RADEON(0): Modeline "832x624" 108.00 832 34208 34320 1688 624 1050 1053 1063
    (**) RADEON(0): Default mode "1152x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
    (II) RADEON(0): Modeline "1152x768" 108.00 1152 34208 34320 1688 768 1050 1053 1063
    (==) RADEON(0): DPI set to (75, 75)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/X11R6/lib/modules/libfb.a
    (II) Module fb: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    ABI class: XFree86 ANSI C Emulation, version 0.2
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/X11R6/lib/modules/libramdac.a
    (II) Module ramdac: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.7
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/X11R6/lib/modules/libxaa.a
    (II) Module xaa: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.1.0
    ABI class: XFree86 Video Driver, version 0.7
    (**) RADEON(0): Using AGP 4x mode
    (II) RADEON(0): AGP Fast Write disabled by default
    (II) RADEON(0): Depth moves disabled by default
    (II) Loading sub module "shadowfb"
    (II) LoadModule: "shadowfb"
    (II) Loading /usr/X11R6/lib/modules/libshadowfb.a
    (II) Module shadowfb: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    ABI class: XFree86 ANSI C Emulation, version 0.2
    (II) RADEON(0): Page flipping disabled
    (!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B]
    [1] 0 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B]
    [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [7] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
    [8] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
    [9] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
    [10] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
    [11] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
    [12] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
    [13] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
    [14] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
    [15] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
    [16] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
    [17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
    [18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
    [19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
    [20] 0 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
    [21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [23] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
    [24] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
    [25] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
    [26] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
    [27] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
    [28] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
    [29] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
    [30] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
    [31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
    (==) RADEON(0): Write-combining range (0xc8000000,0x4000000)
    drmOpenDevice: minor is 0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenDevice: minor is 0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenDevice: minor is 0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmGetBusid returned ''
    (II) RADEON(0): [drm] created "radeon" driver at busid "PCI:1:0:0"
    (II) RADEON(0): [drm] added 8192 byte SAREA at 0xe08a7000
    (II) RADEON(0): [drm] mapped SAREA 0xe08a7000 to 0x44258000
    (II) RADEON(0): [drm] framebuffer handle = 0xc8000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x1039/0x0646; Card 0x1002/0x4c66]
    (II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
    (II) RADEON(0): [agp] ring handle = 0xdc000000
    (II) RADEON(0): [agp] Ring mapped at 0x4425a000
    (II) RADEON(0): [agp] ring read ptr handle = 0xdc101000
    (II) RADEON(0): [agp] Ring read ptr mapped at 0x4435b000
    (II) RADEON(0): [agp] vertex/indirect buffers handle = 0xdc102000
    (II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0x4435c000
    (II) RADEON(0): [agp] GART texture map handle = 0xdc302000
    (II) RADEON(0): [agp] GART Texture map mapped at 0x4455c000
    (II) RADEON(0): [drm] register handle = 0xd7ef0000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): CP in BM mode
    (II) RADEON(0): Using 8 MB GART aperture
    (II) RADEON(0): Using 1 MB for the ring buffer
    (II) RADEON(0): Using 2 MB for vertex/indirect buffers
    (II) RADEON(0): Using 5 MB for GART textures
    (II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
    (II) RADEON(0): Reserved area from (0,1050) to (1408,1052)
    (II) RADEON(0): Largest offscreen area available: 1408 x 7139
    (II) RADEON(0): Will use back buffer at offset 0x11b0000
    (II) RADEON(0): Will use depth buffer at offset 0x1754000
    (II) RADEON(0): Will use 35840 kb for textures at offset 0x1d00000
    (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Offscreen Pixmaps
    Setting up tile and stipple cache:
    32 128x128 slots
    32 256x256 slots
    16 512x512 slots
    (II) RADEON(0): Acceleration enabled
    (==) RADEON(0): Backing store disabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Using hardware cursor (scanline 1052)
    (II) RADEON(0): Largest offscreen area available: 1408 x 7136
    (**) Option "dpms"
    (**) RADEON(0): DPMS enabled
    (II) RADEON(0): X context handle = 0x00000001
    (II) RADEON(0): [drm] installed DRM signal handler
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 11
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
    (II) RADEON(0): Direct rendering enabled
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension LBX
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (**) Option "Protocol" "ImPS/2"
    (**) Mouse1: Device: "/dev/psaux"
    (**) Mouse1: Protocol: "ImPS/2"
    (**) Option "CorePointer"
    (**) Mouse1: Core Pointer
    (**) Option "Device" "/dev/psaux"
    (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ChordMiddle"
    (**) Mouse1: ChordMiddle
    (**) Option "ZAxisMapping" "4 5"
    (**) Mouse1: ZAxisMapping: buttons 4 and 5
    (**) Mouse1: Buttons: 5
    (**) Option "Resolution" "256"
    (**) Mouse1: Resolution: 256
    (II) Keyboard "Keyboard1" handled by legacy driver
    (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
    (II) Mouse1: ps2EnableDataReporting: succeeded
    Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from list!
    (II) RADEON(0): [drm] removed 1 reserved context for kernel
    (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xe08a7000 at 0x44258000

    ...I have tried to launch gnome-session under xfce4 WM.
    It starts but stop it after the first charging with this warning:
    Host name lookup failure on local host.
    In addition, it give me:
    Si è verificato un errore durante l'avvio del demome delle impostazioni di GNOME.
    Alcuni aspetti come temi, suoni o impostazioni dello sfondo potrebbero non funzionare correttamente.
    Il demone delle impostazioni è stato riavviato troppe volte.
    L'ultimo messaggio di errore è stato:
    Child process did not give an error message, unknown failure occurred
    GNOME tenterà di riavviare il demone delle impostazioni al prossimo login.
    sorry if it is in italian.
    Ciao.
    Luca.

  • [SOLVED] Xorg doesn't start after upgrade to 1.17.1

    Archlinux i686
    Intel Core 2 Duo 6600
    01:00.0 VGA compatible controller: NVIDIA Corporation G71 [GeForce 7900 GT/GTO] (rev a1)
    After following upgrades:
    [2015-02-26 03:27] [PACMAN] Running 'pacman -S mesa mesa-demos mesa-libgl'
    [2015-02-26 03:27] [ALPM] transaction started
    [2015-02-26 03:28] [ALPM] upgraded mesa (10.4.2-1 -> 10.4.5-1)
    [2015-02-26 03:28] [ALPM] upgraded mesa-libgl (10.4.2-1 -> 10.4.5-1)
    [2015-02-26 03:28] [ALPM] upgraded mesa-demos (8.2.0-3 -> 8.2.0-4)
    [2015-02-26 03:28] [ALPM] transaction completed
    [2015-02-26 03:28] [PACMAN] Running 'pacman -S xorg-server xorg-server-common'
    [2015-02-26 03:29] [ALPM] transaction started
    [2015-02-26 03:29] [ALPM] removed xf86-video-vesa (2.3.2-5)
    [2015-02-26 03:29] [ALPM] removed xf86-video-nouveau (1.0.11-2)
    [2015-02-26 03:29] [ALPM] removed xf86-video-modesetting (0.9.0-2)
    [2015-02-26 03:29] [ALPM] upgraded xorg-server-common (1.16.3-2 -> 1.17.1-3)
    [2015-02-26 03:29] [ALPM] upgraded xorg-server (1.16.3-2 -> 1.17.1-3)
    Xorg doesn't start after reboot and I found following kernel message:
    kernel: [drm:drm_mmap_locked] *ERROR* Could not find map
    and /var/log/Xorg.0.log looks like this:
    [ 5.591]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 5.591] X Protocol Version 11, Revision 0
    [ 5.591] Build Operating System: Linux 3.18.6-1-ARCH i686
    [ 5.591] Current Operating System: Linux emeria7 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:59:29 CET 2015 i686
    [ 5.591] Kernel command line: root=/dev/disk/by-label/archroot rw
    [ 5.591] Build Date: 22 February 2015 12:52:47PM
    [ 5.591]
    [ 5.592] Current version of pixman: 0.32.6
    [ 5.592] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 5.592] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 5.592] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 26 14:58:35 2015
    [ 5.597] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 5.597] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 5.598] (==) ServerLayout "ServerLayout0"
    [ 5.598] (==) No screen section available. Using defaults.
    [ 5.598] (**) |-->Screen "Default Screen Section" (0)
    [ 5.598] (**) | |-->Monitor "<default monitor>"
    [ 5.599] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 5.599] (**) | |-->Device "Device0"
    [ 5.599] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 5.599] (**) Option "BlankTime" "0"
    [ 5.599] (**) Option "StandbyTime" "0"
    [ 5.599] (**) Option "SuspendTime" "0"
    [ 5.599] (**) Option "OffTime" "0"
    [ 5.599] (==) Automatically adding devices
    [ 5.599] (==) Automatically enabling devices
    [ 5.599] (==) Automatically adding GPU devices
    [ 5.608] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 5.608] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 5.608] (**) Extension "Composite" is disabled
    [ 5.608] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 5.608] (II) Loader magic: 0x829e700
    [ 5.608] (II) Module ABI versions:
    [ 5.608] X.Org ANSI C Emulation: 0.4
    [ 5.608] X.Org Video Driver: 19.0
    [ 5.608] X.Org XInput driver : 21.0
    [ 5.608] X.Org Server Extension : 9.0
    [ 5.611] (EE) systemd-logind: failed to get session: PID 995 does not belong to any known session
    [ 5.611] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 5.612] (--) PCI:*(0:1:0:0) 10de:0291:107d:2a62 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
    [ 5.612] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 5.613] (II) LoadModule: "glx"
    [ 5.616] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 5.632] (II) Module glx: vendor="X.Org Foundation"
    [ 5.632] compiled for 1.17.1, module version = 1.0.0
    [ 5.632] ABI class: X.Org Server Extension, version 9.0
    [ 5.632] (==) AIGLX enabled
    [ 5.632] (==) Matched nouveau as autoconfigured driver 0
    [ 5.632] (==) Matched nv as autoconfigured driver 1
    [ 5.632] (==) Matched nouveau as autoconfigured driver 2
    [ 5.632] (==) Matched nv as autoconfigured driver 3
    [ 5.632] (==) Matched modesetting as autoconfigured driver 4
    [ 5.632] (==) Matched fbdev as autoconfigured driver 5
    [ 5.632] (==) Matched vesa as autoconfigured driver 6
    [ 5.632] (==) Assigned the driver to the xf86ConfigLayout
    [ 5.632] (II) LoadModule: "nouveau"
    [ 5.632] (WW) Warning, couldn't open module nouveau
    [ 5.632] (II) UnloadModule: "nouveau"
    [ 5.632] (II) Unloading nouveau
    [ 5.632] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 5.633] (II) LoadModule: "nv"
    [ 5.633] (WW) Warning, couldn't open module nv
    [ 5.633] (II) UnloadModule: "nv"
    [ 5.633] (II) Unloading nv
    [ 5.633] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 5.633] (II) LoadModule: "modesetting"
    [ 5.633] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 5.634] (II) Module modesetting: vendor="X.Org Foundation"
    [ 5.634] compiled for 1.17.1, module version = 1.17.1
    [ 5.634] Module class: X.Org Video Driver
    [ 5.634] ABI class: X.Org Video Driver, version 19.0
    [ 5.634] (II) LoadModule: "fbdev"
    [ 5.634] (WW) Warning, couldn't open module fbdev
    [ 5.634] (II) UnloadModule: "fbdev"
    [ 5.634] (II) Unloading fbdev
    [ 5.634] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 5.634] (II) LoadModule: "vesa"
    [ 5.634] (WW) Warning, couldn't open module vesa
    [ 5.634] (II) UnloadModule: "vesa"
    [ 5.634] (II) Unloading vesa
    [ 5.634] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 5.634] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 5.634] (++) using VT number 7
    [ 5.635] (II) modeset(0): using drv /dev/dri/card0
    [ 5.635] (II) modeset(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 5.636] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
    [ 5.636] (==) modeset(0): RGB weight 888
    [ 5.636] (==) modeset(0): Default visual is TrueColor
    [ 5.636] (II) Loading sub module "glamoregl"
    [ 5.636] (II) LoadModule: "glamoregl"
    [ 5.636] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [ 5.647] (II) Module glamoregl: vendor="X.Org Foundation"
    [ 5.647] compiled for 1.17.1, module version = 1.0.0
    [ 5.647] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 5.647] (II) glamor: OpenGL accelerated X.org driver based.
    [ 5.772] (II) glamor: EGL version 1.4 (DRI2):
    [ 5.786] (II) modeset(0): glamor initialized
    [ 5.786] (II) Loading sub module "dri2"
    [ 5.786] (II) LoadModule: "dri2"
    [ 5.786] (II) Module "dri2" already built-in
    [ 5.843] (II) modeset(0): Output DVI-0 has no monitor section
    [ 5.896] (II) modeset(0): Output DVI-1 has no monitor section
    [ 5.950] (II) modeset(0): Output TV-0 has no monitor section
    [ 6.006] (II) modeset(0): EDID for output DVI-0
    [ 6.006] (II) modeset(0): Manufacturer: SAM Model: 76f Serial#: 1110590261
    [ 6.006] (II) modeset(0): Year: 2011 Week: 8
    [ 6.006] (II) modeset(0): EDID Version: 1.3
    [ 6.006] (II) modeset(0): Digital Display Input
    [ 6.006] (II) modeset(0): Max Image Size [cm]: horiz.: 51 vert.: 29
    [ 6.006] (II) modeset(0): Gamma: 2.20
    [ 6.006] (II) modeset(0): DPMS capabilities: Off
    [ 6.006] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 6.006] (II) modeset(0): First detailed timing is preferred mode
    [ 6.006] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 6.006] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
    [ 6.006] (II) modeset(0): Supported established timings:
    [ 6.006] (II) modeset(0): 720x400@70Hz
    [ 6.006] (II) modeset(0): 640x480@60Hz
    [ 6.006] (II) modeset(0): 640x480@67Hz
    [ 6.006] (II) modeset(0): 640x480@72Hz
    [ 6.006] (II) modeset(0): 640x480@75Hz
    [ 6.006] (II) modeset(0): 800x600@56Hz
    [ 6.006] (II) modeset(0): 800x600@60Hz
    [ 6.006] (II) modeset(0): 800x600@72Hz
    [ 6.006] (II) modeset(0): 800x600@75Hz
    [ 6.006] (II) modeset(0): 832x624@75Hz
    [ 6.006] (II) modeset(0): 1024x768@60Hz
    [ 6.006] (II) modeset(0): 1024x768@70Hz
    [ 6.006] (II) modeset(0): 1024x768@75Hz
    [ 6.006] (II) modeset(0): 1280x1024@75Hz
    [ 6.006] (II) modeset(0): 1152x864@75Hz
    [ 6.006] (II) modeset(0): Manufacturer's mask: 0
    [ 6.006] (II) modeset(0): Supported standard timings:
    [ 6.006] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 6.006] (II) modeset(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 6.006] (II) modeset(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 6.006] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 6.006] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 6.006] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 6.007] (II) modeset(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 6.007] (II) modeset(0): #7: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 148.5 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 6.007] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 175 MHz
    [ 6.007] (II) modeset(0): Monitor name: SMBX2331
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
    [ 6.007] (II) modeset(0): Number of EDID sections to follow: 1
    [ 6.007] (II) modeset(0): EDID (in hex):
    [ 6.007] (II) modeset(0): 00ffffffffffff004c2d6f0735433242
    [ 6.007] (II) modeset(0): 0815010380331d782aee91a3544c9926
    [ 6.007] (II) modeset(0): 0f5054bfef80714f8100814081809500
    [ 6.007] (II) modeset(0): 950fa940b300023a801871382d40582c
    [ 6.007] (II) modeset(0): 4500fd1e1100001e011d007251d01e20
    [ 6.007] (II) modeset(0): 6e285500fd1e1100001e000000fd0032
    [ 6.007] (II) modeset(0): 4b1f5111000a202020202020000000fc
    [ 6.007] (II) modeset(0): 00534d4258323333310a2020202001ee
    [ 6.007] (II) modeset(0): 02031cf14890041f0514131203230907
    [ 6.007] (II) modeset(0): 078301000066030c00100080011d80d0
    [ 6.007] (II) modeset(0): 721c1620102c2580fd1e1100009e011d
    [ 6.007] (II) modeset(0): 8018711c1620582c2500fd1e1100009e
    [ 6.007] (II) modeset(0): 011d00bc52d01e20b8285540fd1e1100
    [ 6.007] (II) modeset(0): 001e8c0ad090204031200c405500fd1e
    [ 6.007] (II) modeset(0): 110000188c0ad08a20e02d10103e9600
    [ 6.007] (II) modeset(0): fd1e110000180000000000000000004c
    [ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    [ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    [ 6.007] (II) modeset(0): Printing probed modes for output DVI-0
    [ 6.007] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 6.007] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1600x1200"x65.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 6.008] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
    [ 6.008] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
    [ 6.008] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
    [ 6.008] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 6.008] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 6.008] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
    [ 6.008] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
    [ 6.008] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
    [ 6.063] (II) modeset(0): EDID for output DVI-1
    [ 6.116] (II) modeset(0): EDID for output TV-0
    [ 6.116] (II) modeset(0): Output DVI-0 connected
    [ 6.116] (II) modeset(0): Output DVI-1 disconnected
    [ 6.116] (II) modeset(0): Output TV-0 disconnected
    [ 6.116] (II) modeset(0): Using exact sizes for initial modes
    [ 6.116] (II) modeset(0): Output DVI-0 using initial mode 1920x1080
    [ 6.116] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 6.116] (==) modeset(0): DPI set to (96, 96)
    [ 6.116] (II) Loading sub module "fb"
    [ 6.116] (II) LoadModule: "fb"
    [ 6.117] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 6.118] (II) Module fb: vendor="X.Org Foundation"
    [ 6.118] compiled for 1.17.1, module version = 1.0.0
    [ 6.118] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 6.118] (==) Depth 24 pixmap format is 32 bpp
    [ 6.462] (==) modeset(0): Backing store disabled
    [ 6.462] (==) modeset(0): Silken mouse enabled
    [ 6.464] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 6.535] (==) modeset(0): DPMS enabled
    [ 6.535] (WW) modeset(0): Option "EXANoComposite" is not used
    [ 6.535] (II) modeset(0): [DRI2] Setup complete
    [ 6.535] (II) modeset(0): [DRI2] DRI driver: nouveau
    [ 6.535] (II) modeset(0): [DRI2] VDPAU driver: nouveau
    [ 6.535] (--) RandR disabled
    [ 6.551] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 6.551] (II) AIGLX: enabled GLX_ARB_create_context
    [ 6.551] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 6.551] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 6.551] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 6.551] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 6.551] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 6.551] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 6.551] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 6.552] (II) AIGLX: Loaded and initialized nouveau
    [ 6.552] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 6.559] (II) modeset(0): Setting screen physical size to 507 x 285
    [ 6.741] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 6.741] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 6.741] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 6.741] (II) LoadModule: "evdev"
    [ 6.741] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 6.744] (II) Module evdev: vendor="X.Org Foundation"
    [ 6.744] compiled for 1.16.2, module version = 2.9.1
    [ 6.744] Module class: X.Org XInput Driver
    [ 6.744] ABI class: X.Org XInput driver, version 21.0
    [ 6.744] (II) Using input driver 'evdev' for 'Power Button'
    [ 6.744] (**) Power Button: always reports core events
    [ 6.744] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 6.744] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 6.744] (--) evdev: Power Button: Found keys
    [ 6.744] (II) evdev: Power Button: Configuring as keyboard
    [ 6.744] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 6.744] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 6.744] (**) Option "xkb_rules" "evdev"
    [ 6.744] (**) Option "xkb_model" "pc104"
    [ 6.744] (**) Option "xkb_layout" "us"
    [ 6.744] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 6.780] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 6.780] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 6.780] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 6.780] (II) Using input driver 'evdev' for 'Power Button'
    [ 6.780] (**) Power Button: always reports core events
    [ 6.780] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 6.780] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 6.780] (--) evdev: Power Button: Found keys
    [ 6.780] (II) evdev: Power Button: Configuring as keyboard
    [ 6.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
    [ 6.780] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 6.780] (**) Option "xkb_rules" "evdev"
    [ 6.780] (**) Option "xkb_model" "pc104"
    [ 6.780] (**) Option "xkb_layout" "us"
    [ 6.780] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 6.781] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
    [ 6.781] (II) No input driver specified, ignoring this device.
    [ 6.781] (II) This device may have been added with another device file.
    [ 6.782] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event10)
    [ 6.782] (II) No input driver specified, ignoring this device.
    [ 6.782] (II) This device may have been added with another device file.
    [ 6.782] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
    [ 6.782] (II) No input driver specified, ignoring this device.
    [ 6.782] (II) This device may have been added with another device file.
    [ 6.782] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
    [ 6.782] (II) No input driver specified, ignoring this device.
    [ 6.782] (II) This device may have been added with another device file.
    [ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event7)
    [ 6.783] (II) No input driver specified, ignoring this device.
    [ 6.783] (II) This device may have been added with another device file.
    [ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event8)
    [ 6.783] (II) No input driver specified, ignoring this device.
    [ 6.783] (II) This device may have been added with another device file.
    [ 6.783] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9)
    [ 6.783] (II) No input driver specified, ignoring this device.
    [ 6.783] (II) This device may have been added with another device file.
    [ 6.784] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 6.784] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc050
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 6.784] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/0003:046D:C050.0001/input/input1/event1"
    [ 6.784] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
    [ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 6.785] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 6.785] (II) No input driver specified, ignoring this device.
    [ 6.785] (II) This device may have been added with another device file.
    [ 6.785] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
    [ 6.785] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 6.785] (**) AT Translated Set 2 keyboard: always reports core events
    [ 6.785] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 6.785] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 6.785] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 6.785] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 6.785] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 6.785] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 6.785] (**) Option "xkb_rules" "evdev"
    [ 6.785] (**) Option "xkb_model" "pc104"
    [ 6.785] (**) Option "xkb_layout" "us"
    [ 6.785] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 6.803] (EE)
    [ 6.803] (EE) Backtrace:
    [ 6.803] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x132) [0x81df9e2]
    [ 6.804] (EE) 1: ? (?+0x132) [0xb7787cc5]
    [ 6.804] (EE) 2: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x4cd7) [0xb6e2a1c7]
    [ 6.806] (EE) 3: /usr/lib/xorg-server/Xorg (xf86_show_cursors+0x688) [0x80f9008]
    [ 6.806] (EE) 4: /usr/lib/xorg-server/Xorg (xf86DestroyCursorInfoRec+0xcf8) [0x8103fc8]
    [ 6.806] (EE) 5: /usr/lib/xorg-server/Xorg (RamDacHandleColormaps+0x67b) [0x810218b]
    [ 6.807] (EE) 6: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x25d) [0x81c648d]
    [ 6.808] (EE) 7: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x4c1) [0x81c6b31]
    [ 6.808] (EE) 8: /usr/lib/xorg-server/Xorg (CompositeRegisterImplicitRedirectionException+0x4199) [0x8114399]
    [ 6.809] (EE) 9: /usr/lib/xorg-server/Xorg (PanoramiXRenderReset+0x72a) [0x815915a]
    [ 6.810] (EE) 10: /usr/lib/xorg-server/Xorg (ConfineToShape+0x9f1) [0x80843b1]
    [ 6.810] (EE) 11: /usr/lib/xorg-server/Xorg (WindowHasNewCursor+0x3b) [0x8084f2b]
    [ 6.810] (EE) 12: /usr/lib/xorg-server/Xorg (ChangeWindowAttributes+0xb7c) [0x80aa9ec]
    [ 6.811] (EE) 13: /usr/lib/xorg-server/Xorg (ProcBadRequest+0x209) [0x8074a49]
    [ 6.811] (EE) 14: /usr/lib/xorg-server/Xorg (SendErrorToClient+0x3a6) [0x807abf6]
    [ 6.811] (EE) 15: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x42f) [0x807edaf]
    [ 6.811] (EE) 16: /usr/lib/xorg-server/Xorg (miPolyFillRect+0x27f) [0x8068ddf]
    [ 6.814] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xde) [0xb72d864e]
    [ 6.814] (EE) 18: /usr/lib/xorg-server/Xorg (_start+0x21) [0x8068bd9]
    [ 6.814] (EE)
    [ 6.814] (EE) Segmentation fault at address 0x0
    [ 6.814] (EE)
    Fatal server error:
    [ 6.814] (EE) Caught signal 11 (Segmentation fault). Server aborting
    [ 6.814] (EE)
    [ 6.814] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 6.814] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 6.814] (EE)
    [ 6.815] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 6.817] (EE) Server terminated with error (1). Closing log file.
    Note the segfault in modesetting_drv.so!
    Any help?
    I tried to reinstall dependencies of xorg-server and mesa. And then I even went through with the whole system update which I postponed for a few weeks because of the KDE changes. Sadly even the whole system update didn't help.
    Is it possible that any old config files can cause this?
    EDIT:
    I tried kernel parameter "nouveau.modeset=0" but it didn't help.
    Last edited by cro (2015-02-26 16:33:19)

    Ok, I guess I solved it by reinstalling xf86-video-nouveau.
    Funny business! Why did the upgrade to xorg-server 1.17.1 force me to remove it when it is still needed??
    And why does that lead to mysterious error messages and segfault??
    I discovered it accidentally when I stumbled upon the fact that the package was still installed on my newer x86-64 Arch installation despite being on xorg-server 1.17.1.

  • Xorg doesn't start after update

    After updating this day (my system was last updated at the beginning of July
    this year) I have some problem with Xorg. The server just doesn't start, and
    the screen is black. I can get back to the console with Alt-F1.
    Here's my Xorg.0.log:
    X.Org X Server 1.4.2
    Release Date: 11 June 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.25-ARCH i686
    Current Operating System: Linux Data 2.6.25-ARCH #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008 i686
    Build Date: 21 June 2008 05:47:59PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 5 18:54:03 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "LCD Display"
    (**) | |-->Device "SiS"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) RgbPath set to "/usr/share/X11/rgb"
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81e0a60
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (--) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1039,0630 card 0000,0000 rev 31 class 06,00,00 hdr 80
    (II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
    (II) PCI: 00:01:0: chip 1039,0018 card 0000,0000 rev 00 class 06,01,00 hdr 80
    (II) PCI: 00:01:1: chip 1039,0900 card 1043,1455 rev 82 class 02,00,00 hdr 00
    (II) PCI: 00:01:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00
    (II) PCI: 00:01:3: chip 1039,7001 card 1039,7000 rev 07 class 0c,03,10 hdr 00
    (II) PCI: 00:01:4: chip 1039,7018 card 1039,7018 rev 02 class 04,01,00 hdr 00
    (II) PCI: 00:01:6: chip 1039,7013 card 1043,1456 rev a0 class 07,03,00 hdr 00
    (II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:0a:0: chip 1180,0476 card 1000,0000 rev 80 class 06,07,00 hdr 82
    (II) PCI: 00:0a:1: chip 1180,0476 card 1800,0000 rev 80 class 06,07,00 hdr 82
    (II) PCI: 01:00:0: chip 1039,6300 card 1043,1452 rev 31 class 03,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 1 I/O range:
    [0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xd1800000 - 0xd1ffffff (0x800000) MX[b]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xd8000000 - 0xe7efffff (0xff00000) MX[b]
    (II) PCI-to-CardBus bridge:
    (II) Bus 2: bridge is at (0:10:0), (0,2,5), BCTRL: 0x0580 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
    [0] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
    [1] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0x24000000 - 0x27ffffff (0x4000000) MX[b]
    (II) Bus 2 prefetchable memory range:
    [0] -1 0 0x20000000 - 0x23ffffff (0x4000000) MX[b]
    (II) PCI-to-CardBus bridge:
    (II) Bus 6: bridge is at (0:10:1), (0,6,9), BCTRL: 0x0580 (VGA_EN is cleared)
    (II) Bus 6 I/O range:
    [0] -1 0 0x00001800 - 0x000018ff (0x100) IX[b]
    [1] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
    (II) Bus 6 non-prefetchable memory range:
    [0] -1 0 0x2c000000 - 0x2fffffff (0x4000000) MX[b]
    (II) Bus 6 prefetchable memory range:
    [0] -1 0 0x28000000 - 0x2bffffff (0x4000000) MX[b]
    (--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter rev 49, Mem @ 0xd8000000/27, 0xd1800000/17, I/O @ 0xa800/7
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) PCI Memory resource overlap reduced 0xd4000000 from 0xd7ffffff to 0xd3ffffff
    (II) Active PCI resource ranges:
    [0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
    [1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
    [2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
    [3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
    [4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
    [5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
    [6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
    [7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
    [8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
    [9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    [10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
    [11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
    [12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
    [1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
    [2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
    [3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
    [4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
    [5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
    [6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
    [7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
    [8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
    [9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    [10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
    [11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
    [12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
    [5] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
    [6] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
    [7] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
    [8] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
    [9] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
    [10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
    [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [13] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
    [14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
    [15] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    [16] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
    [17] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
    [18] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded by default.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.2, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "sis"
    (II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
    (II) Module sis: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 0.9.4
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    Backtrace:
    And here's what the server writes out:
    Backtrace:
    Inconsistency detected by ld.so: dl-open.c: 260: dl_open_worker: \
    Assertion `_dl_debug_initialize (0, args->nsid)->r_state == RT_CONSISTENT' failed!
    waiting for X server to begin accepting connections
    giving up.
    xinit: Connection reset by peer (errno 104): unable to connect to X server
    xinit: No such process (errno 3): Server error.
    Any ideas? Because I have no idea, what is happening.
    Edit (08.08.2008): All right, don't bother answering this question anymore. The problem is no longer important. This topic can be closed, since it won't be solved.
    (I think it was caused by some error during copying files while updating my system.)
    Last edited by TPJ (2008-08-08 08:42:13)

    sand_man wrote:Is /tmp full?
    Damn you're right. The pacman cache filled the disk...
    Problem solved - thanks!
    Only question left is:What are the correct permissions for /tmp since I'd like to set them back to default.
    Last edited by Isildur (2009-08-16 14:22:23)

  • DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

    Windows DBConsole Service doesn't start after Install OAS F&R-Services
    Hello,
    we have installed:
    WINDOWS Server 2003 with SP 2
    Oracle 10.2.0.1
    OAS F&R Services 10.1.2.0.2
    after Install DBR2 EM / DBConsole did work
    after Install OAS F&R-Service
    the windows-service for DBConsole
    doesn't start, return with an Error Code 2
    see below
    the file named emdbconsole.nohup from output log
    is not to find
    the ias_console does work fine
    OAS F_R-Services do work too
    whats may be wrong ?
    regards
    Norbert
    OracleDBConsoleorclsrvc.log :
    EMDROOT=D:\oracle\product\10.2.0\db_1
    ORACLE_HOME=D:\oracle\product\10.2.0\db_1
    EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    12/14/09 13:13:08 Start pending...
    12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    12/14/09 13:13:09 Tracking process launch...
    12/14/09 13:13:39 dbconsole exited with retCode 2.
    12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
    Edited by: astramare on Dec 15, 2009 8:43 AM

    Hi,
    1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
    cd %ORACLE_HOME%\bin
    emctl stop dbconsole
    2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
    Change line from:
    tracelevel.main=WARN
    To
    tracelevel.main=DEBUG
    Decomment this line, so that the line becomes :
    EMAGENT_PERL_TRACE_LEVEL=DEBUG
    3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
    Change line from:
    log4j.rootCategory=WARN, emlogAppender, emtrcAppender
    To
    log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
    4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
    5. Start the dbconsole and upload the output of each command
    - start the dbconsole: "emctl start dbconsole"
    - issue "emctl clearstate"
    - status the dbconsole: "emctl status dbconsole"
    - check the status of the agent until it comes up: "emctl status agent"
    - force an upload: emctl upload
    6. Check If you are able to view the dbconsole Page & login
    check below logs may be you can see the close error messages to solve the issue.
    <ORACLE_HOME>/<hostname_sid>/sysman/log directory
    <ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
    Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
    Thanks.

  • Teamviewer doesn't start after resume from hibernation

    Teamviewer doesn't start after resume from hibernation, what can I do to make it work?
    I issued command "teamviewer --daemon start" but no success.

    Quote from: BOSSKILLER on 07-July-08, 00:03:29
    That's probably BIOS bug, have a ask MSI here: http://ocss.msi.com.tw/ They can send you a new BIOS to try.
    I supposed that this issue is caused by BIOS bug, and this speculation was confirmed. MSI Support has sent to me link with BIOS version 132, which solves the problem
    Under this link you can find this BIOS: http://rapidshare.com/files/127845890/a7395ims.132.zip.html
    Regards.

  • The browser doesn't start after turning off and turning on the computer

    The browser doesn't start after turning off and turning on the computer. I tried to delete the program entirely (along with personal preferences), create a new account, install a different browser versions. All this did not help. (I have Windows 7.) Help, please! Every day I have to reinstall Firefox!

    Hello Nastena, try a clean re-install, certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you '''remove Firefox program files''' and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    * check also if your antivirus or other security software(firewall, antispyware etc) blocks firefox access.
    thank you

  • FF doesn't start after update to version 27.0.1

    FF doesn't start after update to version 27.0.1
    Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

    Firefox 27.0.1 is too new for me to know what unique issues it might have. I will message you a link to download the installer for Firefox 27.0 to see whether that reverses the problem.

  • Xchat-gnome doesn't start

    Hi,
    I've just made a clean install and for some reason xchat-gnome doesn't start. The window doesn't even show only the notification that the program has crashed. I've tried to compile the package localy but that didn't help.
    I realize this isn't much info to work with but what info would be useful and how do I gather it?
    I would be really glad if someone could help me figure this one out.

    DeepThoughts wrote:
    Could it have something to with what repos we are using?
    I'm using current, extra, community, testing and unstable.
    nuopus, NeoEx and baze, what repos are you using?
    i use those 5 aswell. the only thing from unstable is gimp-devel. from testing i use
    alsa-lib
    alsa-utils
    ipw3945
    kernel26
    klibc-udev
    openssl
    udev
    and then i use self-built avahi, libburn, nss-mdns and squeeze-svn. not really any packages which i think could cause this stuff to work here.
    i use the hosteurope mirrors, maybe some packages are broken on your server, though i don't expect that.

  • My macbook air doesn't start after being for 2 months off, My macbook air doesn't start after being for 2 months oof

    My macbook air doesn't start after being for 2 months off? What can i do?

    Plug it in and leave it on the charger for about 5 minutes then try to turn it on. If that doesnt work, contact apple and have it sent out for repair or take it to your local apple store. they will probably cover it for free if no physical damage has been done.

  • Windows 8.1 doesn't start after update. BLACK SCREEN AFTER LOGIN

     Before all, sorry my english, I'm brazilian and don't found the solution on the brazilian version of HP website.
     After I did the updates, the system ask to restart the notebook, so I did it. And now, when I do the login, after the password page, the Windows doesn't starts. Just a Black Screen appears.
      I can't open the right side window to acces the configurations, and this laptop doesn't have a battery to take out and put in again.
     I had already restore the system.
     So, I use my laptop to work, and it has only 4 days of use.
     I need help! Thanks!

    Hi,
    Run through the following procedure.
    Boot the computer normally and log-in.
    At the black screen, hold down the ctrl and alt keys and press delete.
    Select Task Manager.
    Click on File and select Run new task.
    Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
    Type in the following command ( including spaces ) and hit enter.
    Dism /Online /Cleanup-Image /RestoreHealth
    This will take a while to complete, but when it’s finished, restart the notebook.
    If the screen is still black after you log-in, once again, hold down the ctrl and alt keys and press delete.
    Select Task Manager.
    Click on File and select Run new task.
    Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
    Type in the following command ( there's a space between sfc and the / ) and hit enter.
    Sfc /scannow
    When the scan has finished, check that the result is ‘No integrity violations’, then type exit and hit enter.
    Restart the notebook again.
    Any change?
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • [SOLVED] GDM/Gnome won't start after update

    Today after I run pacman -Suy, GDM/Gnome won't start anymore after reboot. The error message I get after GDM starts is:
    Oh no! Something has gone wrong.
    A problem has occurred and the system can't recover. Please contact a system administrator
    Does anyone have any idea what happened and how can I recover the system?
    Here is the complete log for the update:
    http://bpaste.net/show/209520/
    Here is the journalctl -u gdm log:
    http://sprunge.us/LEOU
    Here is tail -2000 /var/log/messages.log:
    http://sprunge.us/ObWY
    And here is the /var/log/Xorg.0.log:
    http://bpaste.net/show/209549/
    I can't imagine any other log file that might help figure out what happened, let me know if there's anything else.
    Any help is appreciated. Thanks.
    Edit: I stopped gdm, created a ~/.xinitrc and could successfully start Gnome with startx. The problem remains with GDM.
    Edit: The last update solved my problem: http://sprunge.us/RKWA
    Last edited by falmp (2014-04-22 20:38:20)

    I'm not sure my issue is really the same one, but am hoping for some guidance here if possible.  Trying to start GDM gives me the same error message/screen.  After tdm fails I can switch to a console,
    sudo systemctl stop gdm.service
    then
    sudo systemctl start lightdm.service
    and lightdm starts fine.  However, trying to log in to gnome-session gives me the very same error as I had with GDM.  I can log into XFCE just fine.  Attempting to start gnome-ession via startx also gives me the error screen.  Does anyone know how I can diagnose the problem?  Thanks,
    Matt

  • [SOLVED] Exaile doesn't start after system update

    Hi,
    After last system update Exaile won't start I've searched forum and web and can't find solution for that.
    [lukasz@myhost ~]$ exaile
    Traceback (most recent call last):
    File "/usr/lib/exaile/exaile.py", line 32, in <module>
    import gobject
    ImportError: No module named gobject
    As You can see it says something about gobject.
    BTW. After update I also hav problems with catalyst from AUR, my Gnome wasn't starting so I had to replace it with opensource ATI drivers,
    another problem is that everytime I startup gnome it's uing very small fonts, and I have to manually change it to one I had before.
    Please help,
    Regards,
    Lukasz
    Last edited by skraburski (2009-05-31 11:18:25)

    Problem solved, had to reinstall pygobject. It looks like after last update many pacakges were corrupted and now Ia have to reinstall them, do You know any way to automatically reinstall all corrupted packages?
    Regards,
    Lukasz

  • [SOLVED] systemd/cron as user: timer doesn't start after boot

    Hello,
    I've tried to follow the wiki's systemd/cron functionality article to have a systemd service to run hourly.
    Everything seems to be working ok, except that the hourly timer doesn't start automatically : I have to issue a
    systemctl --user timer-hourly.timer start
    command every time I start the machine to get the timer running.
    Can you help me understand what I'm missing to get the (user) timer to start automatically after boot?
    Thanks!
    My setup consists of the following files:
    /home/myuser/.config/systemd/user:
    drwxr-xr-x 2 myuser users 4096 Jun 25 17:30 basic.target.wants/
    -rw-r--r-- 1 myuser users 217 Jun 25 10:08 db_backup.service
    -rw-r--r-- 1 myuser users 232 Jun 25 10:08 test.service
    -rw-r--r-- 1 myuser users 61 Jun 19 12:14 timer-hourly.target
    drwxr-xr-x 2 myuser users 4096 Jun 25 10:10 timer-hourly.target.wants/
    -rw-r--r-- 1 myuser users 134 Jun 19 12:14 timer-hourly.timer
    /home/myuser/.config/systemd/user/basic.target.wants/:
    lrwxrwxrwx 1 myuser users 50 Jun 25 10:08 timer-hourly.timer -> /home/myuser/.config/systemd/user/timer-hourly.timer
    /home/myuser/.config/systemd/user/timer-hourly.target.wants/:
    lrwxrwxrwx 1 myuser users 49 Jun 13 15:51 db_backup.service -> /home/myuser/.config/systemd/user/db_backup.service
    lrwxrwxrwx 1 myuser users 44 Jun 25 10:10 test.service -> /home/myuser/.config/systemd/user/test.service
    timer-hourly.timer:
    [Unit]
    Description=Hourly Timer
    [Timer]
    OnBootSec=5min
    OnCalendar=hourly
    Unit=timer-hourly.target
    [Install]
    WantedBy=basic.target
    timer-hourly.target:
    [Unit]
    Description=Hourly Timer Target
    StopWhenUnneeded=yes
    test.service:
    [Unit]
    Description=Run a test (echo) job every hour
    Wants=timer-hourly.timer
    [Service]
    Nice=19
    IOSchedulingClass=2
    IOSchedulingPriority=7
    ExecStart=/usr/bin/python /home/myuser/test_service.py
    [Install]
    WantedBy=timer-hourly.target
    db_backup.service:
    [Unit]
    Description=Backups databases
    Wants=timer-hourly.timer
    [Service]
    Nice=19
    IOSchedulingClass=2
    IOSchedulingPriority=7
    ExecStart=/home/myuser/source/db_backups/db_backup.sh
    [Install]
    WantedBy=timer-hourly.target
    test_service.py is a simple python script that appends the current time to a file, to check if the service is being run by the timer. (it is after I start the timer after boot, and runs correctly every hour)
    db_backup.sh is a script that dumps a database into a text file in a mercurial repository, commits the change and pushes it to backup locations.
    Last edited by fede (2014-06-25 21:06:09)

    Have you tried this:
    systemctl --user enable timer-hourly.timer

  • Firefox doesn't start after update [SOLVED]

    After one month I have updated my system...
    Now firefox doesn't start anymore because of a
    Segmentation fault
    ldd /usr/bin/firefox
    linux-vdso.so.1 => (0x00007fff92dff000)
    libpthread.so.0 => /lib/libpthread.so.0 (0x00007fab07cdb000)
    libasound.so.2 => /usr/lib/libasound.so.2 (0x00007fab079f6000)
    libdl.so.2 => /lib/libdl.so.2 (0x00007fab077f2000)
    libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x00007fab074e4000)
    libm.so.6 => /lib/libm.so.6 (0x00007fab07262000)
    libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0x00007fab0704c000)
    libc.so.6 => /lib/libc.so.6 (0x00007fab06cf9000)
    /lib/ld-linux-x86-64.so.2 (0x00007fab07ef6000)
    librt.so.1 => /lib/librt.so.1 (0x00007fab06af1000)
    thanks in advance
    Last edited by dejavu (2009-08-21 12:34:56)

    Still no working firefox yet...
    strace firefox
    execve("/usr/bin/firefox", ["firefox"], [/* 53 vars */]) = 0
    brk(0) = 0xa2d000
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5fac1000
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5fac0000
    access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/tls/x86_64/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/usr/lib/xulrunner-1.9.1/tls/x86_64", 0x7fff794bd210) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/tls/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/usr/lib/xulrunner-1.9.1/tls", 0x7fff794bd210) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/x86_64/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/usr/lib/xulrunner-1.9.1/x86_64", 0x7fff794bd210) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
    stat("/usr/lib/xulrunner-1.9.1", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    open("/etc/ld.so.cache", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=153030, ...}) = 0
    mmap(NULL, 153030, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f8a5fa9a000
    close(3) = 0
    open("/lib/libpthread.so.0", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220X\0\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=132895, ...}) = 0
    mmap(NULL, 2204544, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f8a5f68b000
    mprotect(0x7f8a5f6a1000, 2093056, PROT_NONE) = 0
    mmap(0x7f8a5f8a0000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x7f8a5f8a0000
    mmap(0x7f8a5f8a2000, 13184, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f8a5f8a2000
    close(3) = 0
    open("/usr/lib/xulrunner-1.9.1/libasound.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libasound.so.2", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \0\3\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=1165149, ...}) = 0
    mmap(NULL, 3034952, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f8a5f3a6000
    mprotect(0x7f8a5f484000, 2093056, PROT_NONE) = 0
    mmap(0x7f8a5f683000, 32768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xdd000) = 0x7f8a5f683000
    close(3) = 0
    open("/usr/lib/xulrunner-1.9.1/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/lib/libdl.so.2", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260\r\0\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=19394, ...}) = 0
    mmap(NULL, 2109696, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f8a5f1a2000
    mprotect(0x7f8a5f1a4000, 2097152, PROT_NONE) = 0
    mmap(0x7f8a5f3a4000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f8a5f3a4000
    close(3) = 0
    open("/usr/lib/xulrunner-1.9.1/libstdc++.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libstdc++.so.6", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\360\232\5\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=1317022, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5fa99000
    mmap(NULL, 3199032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f8a5ee94000
    mprotect(0x7f8a5ef84000, 2097152, PROT_NONE) = 0
    mmap(0x7f8a5f184000, 36864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf0000) = 0x7f8a5f184000
    mmap(0x7f8a5f18d000, 81976, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f8a5f18d000
    close(3) = 0
    open("/usr/lib/xulrunner-1.9.1/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/lib/libm.so.6", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P>\0\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=589386, ...}) = 0
    mmap(NULL, 2625752, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f8a5ec12000
    mprotect(0x7f8a5ec93000, 2093056, PROT_NONE) = 0
    mmap(0x7f8a5ee92000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x80000) = 0x7f8a5ee92000
    close(3) = 0
    open("/usr/lib/xulrunner-1.9.1/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libgcc_s.so.1", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\360,\0\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0644, st_size=102508, ...}) = 0
    mmap(NULL, 2185752, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f8a5e9fc000
    mprotect(0x7f8a5ea12000, 2093056, PROT_NONE) = 0
    mmap(0x7f8a5ec11000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x7f8a5ec11000
    close(3) = 0
    open("/usr/lib/xulrunner-1.9.1/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/lib/libc.so.6", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\353\1\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=1662170, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5fa98000
    mmap(NULL, 3483656, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f8a5e6a9000
    mprotect(0x7f8a5e7f2000, 2097152, PROT_NONE) = 0
    mmap(0x7f8a5e9f2000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x149000) = 0x7f8a5e9f2000
    mmap(0x7f8a5e9f7000, 18440, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f8a5e9f7000
    close(3) = 0
    open("/usr/lib/xulrunner-1.9.1/librt.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/lib/librt.so.1", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p!\0\0\0\0\0\0@"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=44013, ...}) = 0
    mmap(NULL, 2128848, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f8a5e4a1000
    mprotect(0x7f8a5e4a8000, 2093056, PROT_NONE) = 0
    mmap(0x7f8a5e6a7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0x7f8a5e6a7000
    close(3) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5fa97000
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5fa96000
    arch_prctl(ARCH_SET_FS, 0x7f8a5fa96710) = 0
    mprotect(0x7f8a5e6a7000, 4096, PROT_READ) = 0
    mprotect(0x7f8a5e9f2000, 16384, PROT_READ) = 0
    mprotect(0x7f8a5ee92000, 4096, PROT_READ) = 0
    mprotect(0x7f8a5f184000, 28672, PROT_READ) = 0
    mprotect(0x7f8a5f3a4000, 4096, PROT_READ) = 0
    mprotect(0x7f8a5f8a0000, 4096, PROT_READ) = 0
    mprotect(0x7f8a5fac2000, 4096, PROT_READ) = 0
    munmap(0x7f8a5fa9a000, 153030) = 0
    set_tid_address(0x7f8a5fa967e0) = 11901
    set_robust_list(0x7f8a5fa967f0, 0x18) = 0
    futex(0x7fff794bdafc, FUTEX_WAKE_PRIVATE, 1) = 0
    futex(0x7fff794bdafc, 0x189 /* FUTEX_??? */, 1, NULL, 7f8a5fa96710) = -1 EAGAIN (Resource temporarily unavailable)
    rt_sigaction(SIGRTMIN, {0x7f8a5f690720, [], SA_RESTORER|SA_SIGINFO, 0x7f8a5f699790}, NULL, 8) = 0
    rt_sigaction(SIGRT_1, {0x7f8a5f6907b0, [], SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x7f8a5f699790}, NULL, 8) = 0
    rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
    getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
    getcwd("/home/paul"..., 4096) = 11
    lstat("/home/paul/firefox", 0x7fff794b9840) = -1 ENOENT (No such file or directory)
    open("/proc/cpuinfo", O_RDONLY) = 3
    read(3, "processor\t: 0\nvendor_id\t: Genuine"..., 1024) = 1024
    read(3, "fpu_exception\t: yes\ncpuid level\t:"..., 1024) = 468
    read(3, ""..., 1024) = 0
    close(3) = 0
    readlink("/etc/malloc.conf", 0x7fff794b8480, 4096) = -1 ENOENT (No such file or directory)
    mmap(NULL, 1048576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5f996000
    mmap(NULL, 2097152, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5e2a1000
    munmap(0x7f8a5e2a1000, 2097152) = 0
    mmap(0x7f8a5e400000, 2097152, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5e2a1000
    munmap(0x7f8a5e2a1000, 2097152) = 0
    mmap(NULL, 3145728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5e1a1000
    munmap(0x7f8a5e1a1000, 3145728) = 0
    mmap(0x7f8a5e200000, 2097152, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5e200000
    madvise(0x7f8a5e200000, 2097152, MADV_DONTNEED) = 0
    mmap(NULL, 1048576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5e100000
    madvise(0x7f8a5e100000, 1048576, MADV_DONTNEED) = 0
    lstat("/bin", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    lstat("/bin/firefox", 0x7fff794b9840) = -1 ENOENT (No such file or directory)
    lstat("/usr", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    lstat("/usr/bin", {st_mode=S_IFDIR|0755, st_size=69632, ...}) = 0
    lstat("/usr/bin/firefox", {st_mode=S_IFLNK|0777, st_size=28, ...}) = 0
    readlink("/usr/bin/firefox", "/usr/lib/firefox-3.5/firefox"..., 4095) = 28
    lstat("/usr", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    lstat("/usr/lib", {st_mode=S_IFDIR|0755, st_size=135168, ...}) = 0
    lstat("/usr/lib/firefox-3.5", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    lstat("/usr/lib/firefox-3.5/firefox", {st_mode=S_IFREG|0755, st_size=90424, ...}) = 0
    stat("/usr/lib/firefox-3.5/firefox", {st_mode=S_IFREG|0755, st_size=90424, ...}) = 0
    access("/usr/lib/firefox-3.5/xulrunner/libxpcom.so", R_OK) = -1 ENOENT (No such file or directory)
    open("/usr/lib/firefox-3.5/application.ini", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=2029, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5e0ff000
    fstat(3, {st_mode=S_IFREG|0644, st_size=2029, ...}) = 0
    lseek(3, 0, SEEK_SET) = 0
    read(3, "; ***** BEGIN LICENSE BLOCK *****"..., 2029) = 2029
    lseek(3, 2029, SEEK_SET) = 2029
    close(3) = 0
    munmap(0x7f8a5e0ff000, 4096) = 0
    open("/home/paul/.gre.config", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/home/paul/.gre.d", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/etc/gre.conf", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/etc/gre.d", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 3
    fcntl(3, F_GETFD) = 0x1 (flags FD_CLOEXEC)
    getdents(3, /* 6 entries */, 32768) = 192
    open("/etc/gre.d/1.9.1.conf", O_RDONLY) = 4
    fstat(4, {st_mode=S_IFREG|0644, st_size=131, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5e0ff000
    fstat(4, {st_mode=S_IFREG|0644, st_size=131, ...}) = 0
    lseek(4, 0, SEEK_SET) = 0
    read(4, "# Registration file generated by "..., 131) = 131
    lseek(4, 131, SEEK_SET) = 131
    close(4) = 0
    munmap(0x7f8a5e0ff000, 4096) = 0
    open("/etc/gre.d/1.9.0.10.conf", O_RDONLY) = 4
    fstat(4, {st_mode=S_IFREG|0644, st_size=137, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5e0ff000
    fstat(4, {st_mode=S_IFREG|0644, st_size=137, ...}) = 0
    lseek(4, 0, SEEK_SET) = 0
    read(4, "# Registration file generated by "..., 137) = 137
    lseek(4, 137, SEEK_SET) = 137
    close(4) = 0
    munmap(0x7f8a5e0ff000, 4096) = 0
    open("/etc/gre.d/1.9.1.2.system.conf", O_RDONLY) = 4
    fstat(4, {st_mode=S_IFREG|0644, st_size=74, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5e0ff000
    fstat(4, {st_mode=S_IFREG|0644, st_size=74, ...}) = 0
    lseek(4, 0, SEEK_SET) = 0
    read(4, "[1.9.1.2]\nGRE_PATH=/usr/lib/xulru"..., 74) = 74
    lseek(4, 74, SEEK_SET) = 74
    close(4) = 0
    munmap(0x7f8a5e0ff000, 4096) = 0
    access("/usr/lib/xulrunner-1.9.1/libxpcom.so", R_OK) = 0
    close(3) = 0
    lstat("/usr", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    lstat("/usr/lib", {st_mode=S_IFDIR|0755, st_size=135168, ...}) = 0
    lstat("/usr/lib/xulrunner-1.9.1", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    lstat("/usr/lib/xulrunner-1.9.1/libxpcom.so", {st_mode=S_IFREG|0755, st_size=17112, ...}) = 0
    open("/usr/lib/xulrunner-1.9.1/dependentlibs.list", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=136, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8a5e0ff000
    read(3, "libnspr4.so\nlibplc4.so\nlibplds4.s"..., 4096) = 136
    futex(0x7f8a5f3a50ec, FUTEX_WAKE_PRIVATE, 2147483647) = 0
    open("/usr/lib/xulrunner-1.9.1/libnspr4.so", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/libplc4.so", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/libplds4.so", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/libsqlite3.so", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/libnssutil3.so", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/libsoftokn3.so", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/libnss3.so", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/libssl3.so", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/libsmime3.so", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/libmozjs.so", O_RDONLY) = 4
    read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220\202\1\0\0\0\0\0@"..., 832) = 832
    fstat(4, {st_mode=S_IFREG|0755, st_size=788080, ...}) = 0
    mmap(NULL, 2885352, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x7f8a5de3e000
    mprotect(0x7f8a5def6000, 2097152, PROT_NONE) = 0
    mmap(0x7f8a5e0f6000, 32768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0xb8000) = 0x7f8a5e0f6000
    mmap(0x7f8a5e0fe000, 1768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f8a5e0fe000
    close(4) = 0
    open("/usr/lib/xulrunner-1.9.1/libplds4.so", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/libplds4.so", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/etc/ld.so.cache", O_RDONLY) = 4
    fstat(4, {st_mode=S_IFREG|0644, st_size=153030, ...}) = 0
    mmap(NULL, 153030, PROT_READ, MAP_PRIVATE, 4, 0) = 0x7f8a5fa9a000
    close(4) = 0
    open("/usr/lib/libplds4.so", O_RDONLY) = 4
    read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\17\0\0\0\0\0\0@"..., 832) = 832
    fstat(4, {st_mode=S_IFREG|0755, st_size=15836, ...}) = 0
    mmap(NULL, 2107248, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x7f8a5dc3b000
    mprotect(0x7f8a5dc3e000, 2093056, PROT_NONE) = 0
    mmap(0x7f8a5de3d000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x2000) = 0x7f8a5de3d000
    close(4) = 0
    open("/usr/lib/xulrunner-1.9.1/libplc4.so", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/libplc4.so", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libplc4.so", O_RDONLY) = 4
    read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\25\0\0\0\0\0\0@"..., 832) = 832
    fstat(4, {st_mode=S_IFREG|0755, st_size=21281, ...}) = 0
    mmap(NULL, 2111544, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x7f8a5da37000
    mprotect(0x7f8a5da3b000, 2093056, PROT_NONE) = 0
    mmap(0x7f8a5dc3a000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x3000) = 0x7f8a5dc3a000
    close(4) = 0
    open("/usr/lib/xulrunner-1.9.1/libnspr4.so", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/xulrunner-1.9.1/libnspr4.so", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libnspr4.so", O_RDONLY) = 4
    read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\337\0\0\0\0\0\0@"..., 832) = 832
    fstat(4, {st_mode=S_IFREG|0755, st_size=282434, ...}) = 0
    mmap(NULL, 2341312, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x7f8a5d7fb000
    mprotect(0x7f8a5d833000, 2093056, PROT_NONE) = 0
    mmap(0x7f8a5da32000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x37000) = 0x7f8a5da32000
    mmap(0x7f8a5da35000, 6592, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f8a5da35000
    close(4) = 0
    munmap(0x7f8a5fa9a000, 153030) = 0
    open("/usr/lib/xulrunner-1.9.1/libxul.so", O_RDONLY) = 4
    read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 dF\0\0\0\0\0@"..., 832) = 832
    fstat(4, {st_mode=S_IFREG|0755, st_size=18977320, ...}) = 0
    mmap(NULL, 21121752, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x7f8a5c3d6000
    mprotect(0x7f8a5d415000, 2093056, PROT_NONE) = 0
    mmap(0x7f8a5d614000, 1912832, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x103e000) = 0x7f8a5d614000
    mmap(0x7f8a5d7e7000, 80600, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f8a5d7e7000
    close(4) = 0
    --- SIGSEGV (Segmentation fault) @ 0 (0) ---
    +++ killed by SIGSEGV +++

Maybe you are looking for