...gnome doesn't start after the first screen..

Dear all,
I am in difficult because I have installed Gnome ant it doesn't work.
When I launch gnome-session from .xinitrc "..exec gnome-session", the foot of gnome 2.6 appears, but it finishes to work with the clock of the mouse switch-on.
I attached the log at the end of this page.
Onother problem.
Is it correct my hosts configuration?
If i change it, xfce4 doesn't work correctly (keyboard doesn't work under firefox....).
Please, help me.
Thanks.
Luca.
hosts.
# /etc/hosts: static lookup table for host names
#<ip-address>    <hostname.domain.org>    <hostname>
# 127.0.0.1       localhost.localdomain   localhost
192.168.1.37    localhost.localdomain    localhost
# 192.168.1.37    luca1
# End of file
log
XFree86 Version 4.4.0
Release Date: 29 February 2004
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.4 i686 [ELF]
Current Operating System: Linux Luca1 2.6.5 #1 SMP Mon Apr 5 01:03:13 PDT 2004 i686
Build Date: 01 April 2004
Changelog Date: 29 February 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Apr 23 13:16:10 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "laptop"
(**) | |-->Device "ATI Radeon 9000"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "it"
(**) XKB: layout: "it"
(**) Option "XkbVariant" "nodeadkeys"
(**) XKB: variant: "nodeadkeys"
(==) Keyboard: CustomKeycode disabled
(WW) The directory "/usr/X11R6/lib/X11/fonts/freefont/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.7
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(--) using VT number 7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0646 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0962 card 0000,0000 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:02:1: chip 1039,0016 card 0000,0000 rev 00 class 0c,05,00 hdr 00
(II) PCI: 00:02:3: chip 1039,7007 card 1584,7007 rev 00 class 0c,00,10 hdr 00
(II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev 00 class 01,01,80 hdr 00
(II) PCI: 00:02:6: chip 1039,7013 card 1584,4003 rev a0 class 07,03,00 hdr 00
(II) PCI: 00:02:7: chip 1039,7012 card 1584,5203 rev a0 class 04,01,00 hdr 00
(II) PCI: 00:03:0: chip 1039,7001 card 1584,7001 rev 0f class 0c,03,10 hdr 80
(II) PCI: 00:03:1: chip 1039,7001 card 1584,7001 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:2: chip 1039,7001 card 1584,7001 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:3: chip 1039,7002 card 1584,7002 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:04:0: chip 1039,0900 card 1584,5002 rev 91 class 02,00,00 hdr 00
(II) PCI: 00:08:0: chip 1217,6972 card 4001,0000 rev 00 class 06,07,00 hdr 02
(II) PCI: 01:00:0: chip 1002,4c66 card 1584,2302 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd7e00000 - 0xd7efffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc7c00000 - 0xd7cfffff (0x10100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:8:0), (0,2,5), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x20800000 - 0x20bfffff (0x400000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x20400000 - 0x207fffff (0x400000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] rev 1, Mem @ 0xc8000000/27, 0xd7ef0000/16, I/O @ 0xa800/8, BIOS @ 0xd7ec0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xdc000000 from 0xdfffffff to 0xdbffffff
(II) Active PCI resource ranges:
[0] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
[1] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
[2] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
[3] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
[4] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
[5] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
[6] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
[7] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
[8] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
[9] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[10] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[11] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[12] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[13] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[14] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[15] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[16] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[17] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
[1] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
[2] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
[3] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
[4] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
[5] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
[6] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
[7] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
[8] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
[9] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[10] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[11] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[12] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[13] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[14] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[15] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[16] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[17] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
[6] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
[7] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
[8] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
[9] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
[10] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
[11] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
[12] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
[13] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
[14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[18] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[19] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[20] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[21] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[22] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[23] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "xtt"
(II) Loading /usr/X11R6/lib/modules/fonts/libxtt.a
(II) Module xtt: vendor="X-TrueType Server Project & After X-TT Project"
compiled for 4.4.0, module version = 1.4.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font xtt
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.7
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.7
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 6.5.6
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) ATI: ATI driver (version 6.5.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon 9200PRO 5960 (AGP), ATI Radeon 9200 5961 (AGP),
ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP), ATI Radeon Mobility 9600 (M10) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2 (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Chipset ATI Radeon Mobility 9000 (M9) Lf (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
[6] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
[7] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
[8] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
[9] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
[10] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
[11] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
[12] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
[13] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
[14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[18] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[19] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[20] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[21] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[22] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[23] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
[6] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
[7] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
[8] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
[9] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
[10] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
[11] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
[12] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
[13] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
[14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[21] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[22] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[23] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[24] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[25] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[26] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[27] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[28] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[29] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0xd7ef0000
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.7
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "4"
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility 9000 (M9) Lf (AGP)" (ChipID = 0x4c66)
(--) RADEON(0): Linear framebuffer at 0xc8000000
(--) RADEON(0): BIOS at 0xd7ec0000
(--) RADEON(0): VideoRAM: 65536 kByte (128 bit DDR SDRAM)
(II) RADEON(0): AGP card detected
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.7
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 4, Detected Type: 0
(II) RADEON(0): Non-DDC laptop panel detected
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 4, Detected Type: 0
(II) RADEON(0): Displays Detected: Monitor1--Type 2, Monitor2--Type 0
(II) RADEON(0):
(II) RADEON(0): Primary Display == Type 2
(II) RADEON(0): Panel ID string: Samsung LTN150P1-L02
(II) RADEON(0): Panel Size from BIOS: 1400x1050
(II) RADEON(0): BIOS provided dividers will be used.
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Total number of valid DDC mode(s) found: 0
(II) RADEON(0): Valid mode using on-chip RMX: 1400x1050
(II) RADEON(0): Valid mode using on-chip RMX: 1280x1024
(II) RADEON(0): Valid mode using on-chip RMX: 1024x768
(II) RADEON(0): Valid mode using on-chip RMX: 800x600
(II) RADEON(0): Total number of valid FP mode(s) found: 4
(--) RADEON(0): Virtual size is 1400x1050 (pitch 1408)
(**) RADEON(0): *Mode "1400x1050": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "1400x1050" 108.00 1400 34208 34320 1688 1050 1050 1053 1063
(**) RADEON(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "1280x1024" 108.00 1280 34208 34320 1688 1024 1050 1053 1063
(**) RADEON(0): *Mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "1024x768" 108.00 1024 34208 34320 1688 768 1050 1053 1063
(**) RADEON(0): *Mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "800x600" 108.00 800 34208 34320 1688 600 1050 1053 1063
(**) RADEON(0): Default mode "640x350": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "640x350" 108.00 640 34208 34320 1688 350 1050 1053 1063
(**) RADEON(0): Default mode "640x400": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "640x400" 108.00 640 34208 34320 1688 400 1050 1053 1063
(**) RADEON(0): Default mode "720x400": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "720x400" 108.00 720 34208 34320 1688 400 1050 1053 1063
(**) RADEON(0): Default mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "640x480" 108.00 640 34208 34320 1688 480 1050 1053 1063
(**) RADEON(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "1152x864" 108.00 1152 34208 34320 1688 864 1050 1053 1063
(**) RADEON(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "1280x960" 108.00 1280 34208 34320 1688 960 1050 1053 1063
(**) RADEON(0): Default mode "832x624": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "832x624" 108.00 832 34208 34320 1688 624 1050 1053 1063
(**) RADEON(0): Default mode "1152x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) RADEON(0): Modeline "1152x768" 108.00 1152 34208 34320 1688 768 1050 1053 1063
(==) RADEON(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.7
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.7
(**) RADEON(0): Using AGP 4x mode
(II) RADEON(0): AGP Fast Write disabled by default
(II) RADEON(0): Depth moves disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) RADEON(0): Page flipping disabled
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B]
[1] 0 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xdbffa000 - 0xdbffafff (0x1000) MX[B]
[8] -1 0 0xdbffe000 - 0xdbffefff (0x1000) MX[B]
[9] -1 0 0xdbffd000 - 0xdbffdfff (0x1000) MX[B]
[10] -1 0 0xdbffc000 - 0xdbffcfff (0x1000) MX[B]
[11] -1 0 0xdbffb000 - 0xdbffbfff (0x1000) MX[B]
[12] -1 0 0xdbfff000 - 0xdbffffff (0x1000) MX[B]
[13] -1 0 0xdc000000 - 0xdbffffff (0x0) MX[B]O
[14] -1 0 0xd7ec0000 - 0xd7edffff (0x20000) MX[B](B)
[15] -1 0 0xd7ef0000 - 0xd7efffff (0x10000) MX[B](B)
[16] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[20] 0 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[24] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[25] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[26] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[27] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[28] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[29] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[30] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) RADEON(0): Write-combining range (0xc8000000,0x4000000)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) RADEON(0): [drm] created "radeon" driver at busid "PCI:1:0:0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xe08a7000
(II) RADEON(0): [drm] mapped SAREA 0xe08a7000 to 0x44258000
(II) RADEON(0): [drm] framebuffer handle = 0xc8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x1039/0x0646; Card 0x1002/0x4c66]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xdc000000
(II) RADEON(0): [agp] Ring mapped at 0x4425a000
(II) RADEON(0): [agp] ring read ptr handle = 0xdc101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0x4435b000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xdc102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0x4435c000
(II) RADEON(0): [agp] GART texture map handle = 0xdc302000
(II) RADEON(0): [agp] GART Texture map mapped at 0x4455c000
(II) RADEON(0): [drm] register handle = 0xd7ef0000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
(II) RADEON(0): Reserved area from (0,1050) to (1408,1052)
(II) RADEON(0): Largest offscreen area available: 1408 x 7139
(II) RADEON(0): Will use back buffer at offset 0x11b0000
(II) RADEON(0): Will use depth buffer at offset 0x1754000
(II) RADEON(0): Will use 35840 kb for textures at offset 0x1d00000
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1052)
(II) RADEON(0): Largest offscreen area available: 1408 x 7136
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(II) RADEON(0): X context handle = 0x00000001
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(II) RADEON(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Device: "/dev/psaux"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ChordMiddle"
(**) Mouse1: ChordMiddle
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Option "Resolution" "256"
(**) Mouse1: Resolution: 256
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from list!
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xe08a7000 at 0x44258000

...I have tried to launch gnome-session under xfce4 WM.
It starts but stop it after the first charging with this warning:
Host name lookup failure on local host.
In addition, it give me:
Si è verificato un errore durante l'avvio del demome delle impostazioni di GNOME.
Alcuni aspetti come temi, suoni o impostazioni dello sfondo potrebbero non funzionare correttamente.
Il demone delle impostazioni è stato riavviato troppe volte.
L'ultimo messaggio di errore è stato:
Child process did not give an error message, unknown failure occurred
GNOME tenterà di riavviare il demone delle impostazioni al prossimo login.
sorry if it is in italian.
Ciao.
Luca.

Similar Messages

  • ..gnome doesn't start after first screen [SOLVED]

    Good morning to everybody.
    Yesterday night I have solved the problem: I don't know which is the resolution among the following, but gnome today starts also if a lvm gives me an error at the prompt:
    1. I have changed inittab adding x:5:once/opt/.....gnome-session
    2. change .xinitrc with the command echo ....so I have only gnome-session in xinitrc.
    Thanks.
    Luca.

    ...I have tried to launch gnome-session under xfce4 WM.
    It starts but stop it after the first charging with this warning:
    Host name lookup failure on local host.
    In addition, it give me:
    Si è verificato un errore durante l'avvio del demome delle impostazioni di GNOME.
    Alcuni aspetti come temi, suoni o impostazioni dello sfondo potrebbero non funzionare correttamente.
    Il demone delle impostazioni è stato riavviato troppe volte.
    L'ultimo messaggio di errore è stato:
    Child process did not give an error message, unknown failure occurred
    GNOME tenterà di riavviare il demone delle impostazioni al prossimo login.
    sorry if it is in italian.
    Ciao.
    Luca.

  • Glassfish wont start after the first deployment

    good afternoon.
    i got a problem that i would like to solve whit your help: after the first deployment of my proyect into Glassfish i keep getting this error over and over again, when i reinstall the server everything works fine but after the first deployment the server wont start again, I would be glad to know what i can do to solve this, thx:
    Waiting for domain1 to start ...Error starting domain domain1.
    The server exited prematurely with exit code 1.
    Before it died, it produced the following output:
    Launching GlassFish on Felix platform
    Completed shutdown of GlassFish runtime
    Exception in thread "main" java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:57)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:601)
    at com.sun.enterprise.glassfish.bootstrap.GlassFishMain.main(GlassFishMa
    in.java:97)
    at com.sun.enterprise.glassfish.bootstrap.ASMain.main(ASMain.java:55)
    Caused by: org.jvnet.hk2.component.ComponentException: Failed to create a habita
    t
    at com.sun.enterprise.module.common_impl.AbstractModulesRegistryImpl.cre
    ateHabitat(AbstractModulesRegistryImpl.java:169)
    at com.sun.enterprise.module.bootstrap.Main.createHabitat(Main.java:425)
    at org.jvnet.hk2.osgiadapter.HK2Main.createHabitat(HK2Main.java:96)
    at com.sun.enterprise.glassfish.bootstrap.osgi.EmbeddedOSGiGlassFishRunt
    ime.newGlassFish(EmbeddedOSGiGlassFishRuntime.java:89)
    at com.sun.enterprise.glassfish.bootstrap.GlassFishMain$Launcher.launch(
    GlassFishMain.java:113)
    ... 6 more
    Caused by: java.lang.RuntimeException: Fatal Error. Unable to parse file:/C:/Pr
    ogram%20Files/glassfishv3/glassfish/domains/domain1/config/domain.xml
    at org.glassfish.config.support.DomainXml.parseDomainXml(DomainXml.java:
    273)
    at org.glassfish.config.support.DomainXml.run(DomainXml.java:112)
    at com.sun.enterprise.module.common_impl.AbstractModulesRegistryImpl.pop
    ulateConfig(AbstractModulesRegistryImpl.java:176)
    at com.sun.enterprise.module.common_impl.AbstractModulesRegistryImpl.cre
    ateHabitat(AbstractModulesRegistryImpl.java:158)
    ... 10 more
    Caused by: javax.xml.stream.XMLStreamException: ParseError at [row,col]:[11,88]
    Message: Invalid byte 2 of 4-byte UTF-8 sequence.
    at com.sun.org.apache.xerces.internal.impl.XMLStreamReaderImpl.next(XMLS
    treamReaderImpl.java:590)
    at javax.xml.stream.util.StreamReaderDelegate.next(StreamReaderDelegate.
    java:88)
    at org.glassfish.config.support.XMLStreamReaderFilter.thisNextTag(XMLStr
    eamReaderFilter.java:94)
    at org.glassfish.config.support.XMLStreamReaderFilter.nextTag(XMLStreamR
    eaderFilter.java:74)
    at org.jvnet.hk2.config.ConfigParser.handleElement(ConfigParser.java:199
    at org.jvnet.hk2.config.ConfigParser.handleElement(ConfigParser.java:215
    at org.jvnet.hk2.config.ConfigParser.handleElement(ConfigParser.java:167
    at org.jvnet.hk2.config.ConfigParser.parse(ConfigParser.java:98)
    at org.jvnet.hk2.config.ConfigParser.parse(ConfigParser.java:93)
    at org.glassfish.config.support.DomainXml.parseDomainXml(DomainXml.java:
    254)
    ... 13 more
    Command start-domain failed.

    UPDATE:
    I also tried a safe boot and now after inserting install DVD and pressing the option (alt) I choose the DVD-Install disc to boot but after 30-45 seconds appers on the grey boot monitor from "behind" the Terminal panic message:
    panic (cpu 4 caller 0xfffffff80002d1208): Kernel trap at  ...
    Error code: 0x0000000000000000
    Debugger called: <panic>
    Backtrace (CPU 4), Frame : Return Adress
    0xfffffffff8153283600 : 0x8000204d15
    BSD process corresponding to current thread: ReportCrash
    Mac Os version:
    10J4139
    Kernel version:
    Darwin Kernel Version 10.7.4: Mon Apr 18 21:24:17 PDT 2011; root:xnu-1504.14.12~3/RELEASE_X86_64
    How can I solve this, any Idea?
    THX

  • Satellite L505-13X - Doesn't start at the first time

    my laptop does not start at the first time I turn and I put it out several times that it starts

    Hello
    > thanks you my friend but my problem has not been answered yet. because i have more than one laptop and all have the same problem
    For me it sounds like a software problem.
    I mean if you have installed XP, nobody knows which drivers you have installed and applications. Everything could cause this issue and in this case you have to search for a solution yourself.
    If you install the OS from Toshiba recovery disk and everything works properly, its not a hardware malfunction and not an issue of Toshiba.

  • ITunes doesn't open after the first time

    Hi, my iTunes after the last upgrading doesn't open. Really it open the first time after starting pc then , when i shut down it seems frozen. Could you help me? Do you ave a solution?

    Try following steps and test one at a time:
    1. Restart computer, right mouse click iTunes icon and select "Run As Administrator"
    2. If that does not work, check to see if this file APSDaemon.exe is the problem here.
    Close your iTunes.
    Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
    Now open itunes and see if it is working?
    If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
    MSCONFIG
    Hit ENTER
    Click STARTUP Tab, Uncheck "Apple Push", click OK.
    Restart Windows.
    3. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
    http://support.apple.com/kb/TS2363
    4. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR.

  • HT1533 Help my iMac doesn't start from the white screen and apple and whirring gear icon.

    Help!  My IMac doesn't boot up ...just a white screen, apple and whirring gear. I tried turning it off and on and then turning it on while holding down the shift key but nothing. 

    Could be a HD failure. Gina please do 2 things, first is when you post it's imperative for us to know some things about your system so we can diagnose properly. We need to know what iMac you have, some basics about how it's configured and how much RAM is installed and most importantly the version of OS X installed. Without those basics it's very difficult.  To get you started though, please carefully read and methodically follow Apple's instructions in Gray screen appears during startup

  • Xchat-gnome doesn't start

    Hi,
    I've just made a clean install and for some reason xchat-gnome doesn't start. The window doesn't even show only the notification that the program has crashed. I've tried to compile the package localy but that didn't help.
    I realize this isn't much info to work with but what info would be useful and how do I gather it?
    I would be really glad if someone could help me figure this one out.

    DeepThoughts wrote:
    Could it have something to with what repos we are using?
    I'm using current, extra, community, testing and unstable.
    nuopus, NeoEx and baze, what repos are you using?
    i use those 5 aswell. the only thing from unstable is gimp-devel. from testing i use
    alsa-lib
    alsa-utils
    ipw3945
    kernel26
    klibc-udev
    openssl
    udev
    and then i use self-built avahi, libburn, nss-mdns and squeeze-svn. not really any packages which i think could cause this stuff to work here.
    i use the hosteurope mirrors, maybe some packages are broken on your server, though i don't expect that.

  • My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    Hello Nadersalah,
    It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    iPhone Repair and Service - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    If no joy... Try a Restore...
    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
    From Here
    Unresponsive iPad
    http://support.apple.com/kb/TS3281

  • Can we skip the first screen after call transaction has been performed?

    Hello Friends,
    I have written a program for INTERCATIVE REPORT .
    When i click on the link it needs to call transcation MD4C.
    I have written a BDC for calling the transaction and skipped first screen.Its working fine but the problem is that WHEN I TRY TO COME BACK TO MY REPORT OUTPUT USING(BACK OR EXIT OR CANCEL) BUTTONS THE CONTROL IS PASSING THRU THE FIRST SCREEN OF TRANSACTION MD4C and then its coming back to report output.
    Now i dont need the first screen of the MD4C to be dispalyed when i use the BUTTONS.
    That means i want to dirctly come to report output when i click (BACK OR EXIT OR CANCEL) BUTTONS.
    Hope the problem is clear.
    Is there any way?
    Please do suggest me.
    Thankx in advance,
    Sanghamitra.

    Hello everybody,
    Thanks a lot for the quick replies.
    The problem i m facing comes after the call transaction statement gets executed.
    when the statement gets executed i m able to skip first screen and goto the required screen in the transaction but WHEN I PRESS BACK BUTTON THERE it is showing the initial screen which i have skipped.I dont want this scrren to be dispalyed.When i press back it should directly take me to the report output from where i have come to this transaction.
    Hope i m clear now?
    Any suggestions.
    Regards,
    Sanghamitra.

  • My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.

    My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
    I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.

    here is link to the apple product feedback website:
    http://www.apple.com/feedback/

  • I have purchased a new macbook pro model no 840ll/a after the first installation i shut down the coputer. when i start gain i cant  . it is asking the passwoerd and i dont remember what is the password . please help

    i have purchased a new macbook pro model no 840ll/a after the first installation i shut down the coputer. when i start gain i cant  . it is asking the passwoerd and i dont remember what is the password . and when i give the apple id password it is not accepting  . what to do

    i am able boot my system because of wrong password  . how to open

  • The browser doesn't start after turning off and turning on the computer

    The browser doesn't start after turning off and turning on the computer. I tried to delete the program entirely (along with personal preferences), create a new account, install a different browser versions. All this did not help. (I have Windows 7.) Help, please! Every day I have to reinstall Firefox!

    Hello Nastena, try a clean re-install, certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you '''remove Firefox program files''' and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    * check also if your antivirus or other security software(firewall, antispyware etc) blocks firefox access.
    thank you

  • After upgrading the iPhone 4 to iOS5, the camera icon doesn't appear on the lock screen. How do I get that? I've already tried restoring...

    After upgrading the iPhone 4 to iOS5, the camera icon doesn't appear on the lock screen. How do I get that? I've already tried restoring...
    My photostream doesn't sync to my Mac Air either...

    And to continue the help:
    The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook.

  • Hi everybody, adobe muse does not start at the first attempt after installation. know the reason and possible solution? (on iMac 27 retina - latest edition)

    Hi everybody, adobe muse does not start at the first attempt after installation. know the reason and possible solution? (on iMac 27 retina - latest edition)

    Hi
    Are you still experiencing the issue or is it fixed now?

Maybe you are looking for