Gnome doesnt start automatically
Hi,
I ve followed all the steps that described in the beginners guide, but still cannot make it to have gnome at once.
Although i am able to login at gdm, what i am getting next is an x-session with 3 terminal windows.
If i want to have gnome i have to write exec gnome-session.
Is there any way to have gnome desktop without the need to write all the time exec gnome-session.
P.S I ve copied the /skel/.xinitrc to my /home directory and added exec dbus-launch gnome-session to it.
I still can not figure out what i am doing wrong.....
Please give me a hint cause if i cannot start the desktop i will be dissapointed.
MrWeatherbee wrote:
x-tra wrote:i cant believe that i forgot t select gnome session from the gdm screen that is i couldnt see any gnome!!!!:lol:
Yea. Based on your first post:
x-tra wrote:Although i am able to login at gdm, what i am getting next is an x-session with 3 terminal windows.
it seemed to me that you were successfully getting to GDM login but just were not getting to your gnome session, so that's why I didn't go into great detail about setting up GDM and just suggested using a different init file (~/.gnomerc in this case).
But, basically, you were choosing the wrong session at GDM, and once you selected Gnome, you were good to go, is that correct?
Anyway, back to dbus-launch ... any background on why you chose this methodology over putting dbus in the rc.conf daemons? I'm not criticizing, I've just not seen it done this way, so I thought you could provide some insight into your choice.
it doesnt make any difference its just another way to load dbus and having some options for the gnome-session.
Your solution is much easier so i stick with that.
Similar Messages
-
Cluster and ASM services doesnt start automatically
Hi,
I have configured a 2 node 10g RAC environment (rac, rac2) in RHEL 4 through vmware.
However the cluster services and ASM services do not come up automatically after server reboot. I have to manually bring it up using ./srvctl command.
[root@rac2 bin]# ./crs_stat -t
Name Type Target State Host
ora....SM1.asm application ONLINE UNKNOWN rac
ora....AC.lsnr application ONLINE UNKNOWN rac
ora.rac.gsd application ONLINE UNKNOWN rac
ora.rac.ons application ONLINE UNKNOWN rac
ora.rac.vip application ONLINE ONLINE rac
[email protected] application ONLINE UNKNOWN rac2
ora....C2.lsnr application ONLINE UNKNOWN rac2
ora.rac2.gsd application ONLINE UNKNOWN rac2
ora.rac2.ons application ONLINE UNKNOWN rac2
ora.rac2.vip application ONLINE ONLINE rac2
Could someone please guide me as to how these services can be brought up automatically upon every reboot?Normally all services will start automatically, I am not sure how you installed and configured your RAC.
Here i am giving all options.
Option1:-
Re: CRS auto-start
Option2:-
See the below links.
http://jaffardba.blogspot.com/2009/03/how-to-startup-rac-database-services.html
http://www.dannorris.com/2009/03/12/start-database-services-automatically-after-instance-startup/
Option3:-
if you simply want to start the service upon server reboot, put srvctl
command in rc.local script under /etc directory.
Hope this solves your issue.
Regards
Click here to [createdisk, deletedisk and querydisk in ASM|http://www.oracleracexpert.com/2009/09/createdisk-deletedisk-and-querydisk-in.html]
Click here to see [ RAC database Instance hang/restart due to node eviction and Solution.|http://www.oracleracexpert.com/2009/09/ora-29740-evicted-by-member-0-group.html]
Click here for [Cross platform Transportable tablespace using RMAN|http://www.oracleracexpert.com/2009/10/cross-platform-transportable-tablespace.html]
http://www.oracleracexpert.com -
Reports engine doesnt start automatically
Hello,
I install weblogic 10.3.3 with forms&reports 11.1.1.3 and I have the following issue.
When the weblogic starts, the reports engine (RWENG) doesn't star automatically to print the reports. To be able to print the first report I need to manually open the "/reports/rwservlet/showjobs?jobname" site or press the "start in-process button".
I already tried to define the" minEngine=1, initEngine=1 and maxEngine=5" but the issue persists.
Can anyone help me out? How can I start the reports engine automatically, so I dont need to open the URL or press the button every time the weblogic starts?
Thank you.MrWeatherbee wrote:
x-tra wrote:i cant believe that i forgot t select gnome session from the gdm screen that is i couldnt see any gnome!!!!:lol:
Yea. Based on your first post:
x-tra wrote:Although i am able to login at gdm, what i am getting next is an x-session with 3 terminal windows.
it seemed to me that you were successfully getting to GDM login but just were not getting to your gnome session, so that's why I didn't go into great detail about setting up GDM and just suggested using a different init file (~/.gnomerc in this case).
But, basically, you were choosing the wrong session at GDM, and once you selected Gnome, you were good to go, is that correct?
Anyway, back to dbus-launch ... any background on why you chose this methodology over putting dbus in the rc.conf daemons? I'm not criticizing, I've just not seen it done this way, so I thought you could provide some insight into your choice.
it doesnt make any difference its just another way to load dbus and having some options for the gnome-session.
Your solution is much easier so i stick with that. -
Hi to all,
we have a database in Oracle 8.1.7, some times the service comes up automatic, some times it doesnt come , we need to mount/open it thorugh Oracle DBA Studio manually then it is coming. the system has got enough memory like 512 MB. what could be the reason..
Thanks in advance.Hi friends,
But i think Oracle service should/can start evenwe dont login to OS. i want to make it available just after putting on the server, some times i dont want to logon to the OS user, let the OS user /password dialog box comes and stays there. before it used to happen automatic, now its not happening, we have to open DBA studio and make it happen.
Thanks for your reply.. and advance thanks for this. -
[SOLVED] After force restart GNOME doesnt' start
Hello!
I have a problem I can't resolve.
I restarted my pc where was opened GNOME session and next time GNOME haven't started. Just showing some startup applications ( Skype and notify window "the configuration defaults for the GNOME Power Manager have not been installed correctly. Please contact your computer administrator").
Here are some logs that could be helpful:
everything.log
Jan 24 01:42:02 pz init: Entering runlevel: 3
Jan 24 01:42:06 pz dhclient: isc-dhclient-4.1.0p1
Jan 24 01:42:06 pz dhclient: isc-dhclient-4.1.0p1
Jan 24 01:42:12 pz kernel: eth0: link down
Jan 24 01:42:13 pz kernel: agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
Jan 24 01:42:13 pz kernel: agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
Jan 24 01:42:13 pz kernel: nvidia 0000:02:00.0: putting AGP V3 device into 8x mode
Jan 24 01:42:16 pz dhcpcd: dhcpcd not running
Jan 24 01:42:18 pz gnome-session[4580]: WARNING: Error retrieving configuration key '/desktop/gnome/session/idle_delay': Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to GConf daemon: Message did not receive a reply (timeout by message bus))
Jan 24 01:42:18 pz gnome-session[4580]: WARNING: Could not connect to ConsoleKit: Could not get owner of name 'org.freedesktop.ConsoleKit': no such name
Jan 24 01:42:18 pz gnome-session[4580]: WARNING: Could not connect to ConsoleKit: Could not get owner of name 'org.freedesktop.ConsoleKit': no such name
Jan 24 01:42:19 pz dhcpcd: dhcpcd not running
Jan 24 01:42:19 pz kernel: eth0: link down
Jan 24 01:42:19 pz dhcpcd: dhcpcd not running
Jan 24 01:42:24 pz gnome-session[4580]: WARNING: No required applications specified
Jan 24 01:42:27 pz kernel: wlan0: direct probe to AP 00:03:2f:2b:9f:4d (try 1)
Jan 24 01:42:27 pz kernel: wlan0: direct probe to AP 00:03:2f:2b:9f:4d (try 2)
Jan 24 01:42:27 pz kernel: wlan0: direct probe to AP 00:03:2f:2b:9f:4d (try 3)
Jan 24 01:42:27 pz kernel: wlan0: direct probe responded
Jan 24 01:42:27 pz kernel: wlan0: authenticate with AP 00:03:2f:2b:9f:4d (try 1)
Jan 24 01:42:27 pz kernel: wlan0: authenticated
Jan 24 01:42:27 pz kernel: wlan0: associate with AP 00:03:2f:2b:9f:4d (try 1)
Jan 24 01:42:27 pz kernel: wlan0: RX AssocResp from 00:03:2f:2b:9f:4d (capab=0x431 status=0 aid=1)
Jan 24 01:42:27 pz kernel: wlan0: associated
Jan 24 01:42:28 pz dhcpcd: version 5.1.4 starting
Jan 24 01:42:28 pz kernel: fuse init (API version 7.13)
Jan 24 01:42:28 pz dhcpcd: wlan0: rebinding lease of 192.168.1.100
Jan 24 01:42:29 pz Failed: to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to GConf daemon: Message did not receive a reply (timeout by message bus))
Jan 24 01:42:30 pz Failed: to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to GConf daemon: Message did not receive a reply (timeout by message bus))
Jan 24 01:42:31 pz Failed: to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to GConf daemon: Message did not receive a reply (timeout by message bus))
Jan 24 01:42:31 pz Failed: to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to GConf daemon: Message did not receive a reply (timeout by message bus))
Jan 24 01:42:32 pz dhcpcd: wlan0: acknowledged 192.168.1.100 from 192.168.1.1
Jan 24 01:42:32 pz dhcpcd: wlan0: checking for 192.168.1.100
Jan 24 01:42:37 pz dhcpcd: wlan0: leased 192.168.1.100 for 604800 seconds
Jan 24 01:42:37 pz gnome-session[4580]: WARNING: Application 'gnome-settings-daemon.desktop' failed to register before timeout
Jan 24 01:42:37 pz dhcpcd: forking to background
Jan 24 01:43:07 pz kernel: agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
Jan 24 01:43:07 pz kernel: agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
Jan 24 01:43:07 pz kernel: nvidia 0000:02:00.0: putting AGP V3 device into 8x mode
Jan 24 01:43:08 pz gnome-session[4953]: WARNING: Unable to determine session: Unable to lookup session information for process '4953'
In Xorg.0.log everything seems ok and there are no errors.
There is a fact, that GNOME starts successfully from another user (root). So the problem could be in user settings or some unclosed sessions. Do not know what to do from logs
Thanks in advance!
Last edited by zayac (2010-01-24 01:17:55)zayac wrote:
Ok. I solved this for my issues.
The solution was found on the ubuntu forum:
http://ubuntuforums.org/showthread.php?t=1082257
What I've done is:
mv /myuser/.gconfd/saved_state /myuser/.gconfd/saved_state_backup
Then I had a completely recovered GNOME session on a next boot.
Moreover, it seems for me that saved_state could be completely removed in this case.
I'm going to go try that and see if it works -
Km Index does not Start Automatically
Hi:
I created an Index with one data source ( FSDB Repository ). In the TREX Monitor I edit the Queue Parameters:
Schedule type: Both
Schedule Time: All-0:01 ( Every minute ).
I have added documents manually to the repository and the index started autimatically each minute. Everything was working fine, but now the Index doesnt Start automatically, I have to flush it or do an incremental update if I want the documents quickly visible in the search. I haven´t make any changes in the queue parameters.
Please help,
Thanks,
LucianaI have to same problem: Bought Elgato Sat 3 years ago. Now I decided to install it in the living room and bought a new i5 Mac mini. EyeTV works fine but does not wake up Mountain Lion 10.8.2 sometimes.
When I program wake up events manually via System Preferences or pmset command in the terminal, all works fine and my Mac wakes up. I tried everything, from clean reinstall to debugging AutoWake.plist and such.
Annoying! -
Panel does not start automatically in Gnome 2.24.3
Since Gnome 2.24.3, the Gnome Panel does not start automatically.
I had to manualy add it to the startup group via "Sessions" in order to force it to start when login finishes.
Does anybody has the same behavior?
Should I report it as a bug?That may be true but it is a real pain since when it happens the only way to recover is to terminate all of the iTunes modules with task manager and start it manually. It also leaves the IPOD in a state that says do not disconnect. You can disconnect since nothing is really happening but there is no excuse for this not to start much faster. When you have multiple users it is a real pain. It ought to be able to either end when finished or better yet allow multiple users simultaneously updating from different libraries.
I guess i will just have to get in the habit of treating it as a single user and start and stop it every time I need it and be suer not to let it run. Not nice because that means waiting for larger Podcast downloads instead of having there ready for me when I sign on my computer. -
my phone(4s) switches off automatically at 20% and doesnt start till i cahrge it,and once i put it on charge it shows batterl level 28%,earlier my battery wud drain till 1% then it used to switch off please help
These are usually the features of a faulty battery. Restore iPhone Firmware with iTunes 10.7 or 11 on computer. See if better. If not, and there is Warranty or AppleCare make Genius reservation and take iPhone to Apple for resolution. If no Coverage, still make Genius reservation and take iPhone to Apple Store for free quick (minutes time) battery diagnostic testing.
-
Gnome 3 starting in fallbackmode
Hi all.
I've a Inspiron 9400 with a Radeon Mobility X1400 card. Gnome 3 starts in fallback it says that card have no accelerated support, but when I try a Fedora Live with Gnome 3 it starts correctly in standard mode.
I'm not using t xorg.conf file and I'm using the open source drivers xf86-video-ati (the same as Live Fedora).
Some logs:
$HOME/.xsession-errors
gnome-session-is-accelerated: No hardware 3D support.
gnome-session-check-accelerated: Helper exited with code 256
gnome-session[14033]: WARNING: Session 'gnome' runnable check failed: Salió con el código 1
gnome-session[14033]: EggSMClient-WARNING: Desktop file '/home/dani/.config/autostart/dropbox.desktop' has malformed Icon key 'dropbox.png'(should not include extension)
GNOME_KEYRING_CONTROL=/tmp/keyring-qcEhuG
GNOME_KEYRING_PID=14061
GNOME_KEYRING_CONTROL=/tmp/keyring-qcEhuG
GPG_AGENT_INFO=/tmp/keyring-qcEhuG/gpg:0:1
SSH_AUTH_SOCK=/tmp/keyring-qcEhuG/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-qcEhuG
GPG_AGENT_INFO=/tmp/keyring-qcEhuG/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-qcEhuG
GPG_AGENT_INFO=/tmp/keyring-qcEhuG/gpg:0:1
SSH_AUTH_SOCK=/tmp/keyring-qcEhuG/ssh
(gnome-settings-daemon:14062): keybindings-plugin-WARNING **: La combinación de teclas (screenreader) está incompleta
(gnome-settings-daemon:14062): keybindings-plugin-WARNING **: La combinación de teclas (magnifier) está incompleta
(gnome-settings-daemon:14062): keybindings-plugin-WARNING **: La combinación de teclas (onscreenkeyboard) está incompleta
WARNING: gnome-keyring:: no socket to connect to
** (gsynaptics-init:14149): WARNING **: Using synclient
[2011-12-11 19:22] [WARNING] System is not able to show notifications.
** (gnome-fallback-mount-helper:14135): DEBUG: Starting automounting manager
** (gnome-fallback-mount-helper:14135): DEBUG: Found ConsoleKit session at path /org/freedesktop/ConsoleKit/Session8
** (gnome-fallback-mount-helper:14135): DEBUG: ScreenSaver name vanished
** (gnome-fallback-mount-helper:14135): DEBUG: ConsoleKit session is active 1
Failed to play sound: File or data not found
** Message: applet now removed from the notification area
** (gnome-fallback-mount-helper:14135): DEBUG: ScreenSaver name appeared
** (gnome-fallback-mount-helper:14135): DEBUG: ScreenSaver proxy ready
** (gnome-fallback-mount-helper:14135): DEBUG: Screensaver GetActive() returned 0
** (nm-applet:14137): WARNING **: get_all_cb: couldn't retrieve system settings properties: (25) Launch helper exited with unknown return code 1.
** (nm-applet:14137): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown return code 1.
** (nm-applet:14137): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
QSystemTrayIcon::setVisible: No Icon set
** Message: applet now embedded in the notification area
** Message: applet now removed from the notification area
** (gnome-fallback-mount-helper:14135): DEBUG: ConsoleKit session is active 0
** (gnome-fallback-mount-helper:14135): DEBUG: ConsoleKit session is active 1
(gnome-settings-daemon:14062): color-plugin-WARNING **: Done switch to new account, reload devices
(exe:15399): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
/var/log/Xorg.0.log
[ 3488.635]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 3488.635] X Protocol Version 11, Revision 0
[ 3488.635] Build Operating System: Linux 3.1.5-1-ARCH i686
[ 3488.635] Current Operating System: Linux leize 3.1.5-1-ARCH #1 SMP PREEMPT Sun Dec 11 06:26:14 UTC 2011 i686
[ 3488.635] Kernel command line: root=/dev/sda2 ro vga=791
[ 3488.635] Build Date: 17 December 2011 09:38:27AM
[ 3488.635]
[ 3488.635] Current version of pixman: 0.24.0
[ 3488.635] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3488.636] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3488.636] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 21 19:22:21 2011
[ 3488.636] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3488.636] (==) No Layout section. Using the first Screen section.
[ 3488.636] (==) No screen section available. Using defaults.
[ 3488.636] (**) |-->Screen "Default Screen Section" (0)
[ 3488.636] (**) | |-->Monitor "<default monitor>"
[ 3488.636] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3488.636] (==) Automatically adding devices
[ 3488.636] (==) Automatically enabling devices
[ 3488.636] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3488.636] Entry deleted from font path.
[ 3488.637] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 3488.637] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3488.637] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3488.637] (II) Loader magic: 0x8228580
[ 3488.637] (II) Module ABI versions:
[ 3488.637] X.Org ANSI C Emulation: 0.4
[ 3488.637] X.Org Video Driver: 11.0
[ 3488.637] X.Org XInput driver : 13.0
[ 3488.637] X.Org Server Extension : 6.0
[ 3488.638] (--) PCI:*(0:1:0:0) 1002:7145:1028:2002 rev 0, Mem @ 0xd0000000/268435456, 0xefdf0000/65536, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
[ 3488.638] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3488.638] (II) LoadModule: "extmod"
[ 3488.638] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 3488.638] (II) Module extmod: vendor="X.Org Foundation"
[ 3488.638] compiled for 1.11.3, module version = 1.0.0
[ 3488.638] Module class: X.Org Server Extension
[ 3488.638] ABI class: X.Org Server Extension, version 6.0
[ 3488.638] (II) Loading extension MIT-SCREEN-SAVER
[ 3488.638] (II) Loading extension XFree86-VidModeExtension
[ 3488.638] (II) Loading extension XFree86-DGA
[ 3488.638] (II) Loading extension DPMS
[ 3488.638] (II) Loading extension XVideo
[ 3488.638] (II) Loading extension XVideo-MotionCompensation
[ 3488.638] (II) Loading extension X-Resource
[ 3488.638] (II) LoadModule: "dbe"
[ 3488.639] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 3488.639] (II) Module dbe: vendor="X.Org Foundation"
[ 3488.639] compiled for 1.11.3, module version = 1.0.0
[ 3488.639] Module class: X.Org Server Extension
[ 3488.639] ABI class: X.Org Server Extension, version 6.0
[ 3488.639] (II) Loading extension DOUBLE-BUFFER
[ 3488.639] (II) LoadModule: "glx"
[ 3488.639] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3488.639] (II) Module glx: vendor="X.Org Foundation"
[ 3488.639] compiled for 1.11.3, module version = 1.0.0
[ 3488.639] ABI class: X.Org Server Extension, version 6.0
[ 3488.639] (==) AIGLX enabled
[ 3488.639] (II) Loading extension GLX
[ 3488.639] (II) LoadModule: "record"
[ 3488.639] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 3488.639] (II) Module record: vendor="X.Org Foundation"
[ 3488.639] compiled for 1.11.3, module version = 1.13.0
[ 3488.639] Module class: X.Org Server Extension
[ 3488.639] ABI class: X.Org Server Extension, version 6.0
[ 3488.639] (II) Loading extension RECORD
[ 3488.640] (II) LoadModule: "dri"
[ 3488.640] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 3488.640] (II) Module dri: vendor="X.Org Foundation"
[ 3488.640] compiled for 1.11.3, module version = 1.0.0
[ 3488.640] ABI class: X.Org Server Extension, version 6.0
[ 3488.640] (II) Loading extension XFree86-DRI
[ 3488.640] (II) LoadModule: "dri2"
[ 3488.640] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 3488.640] (II) Module dri2: vendor="X.Org Foundation"
[ 3488.640] compiled for 1.11.3, module version = 1.2.0
[ 3488.640] ABI class: X.Org Server Extension, version 6.0
[ 3488.640] (II) Loading extension DRI2
[ 3488.640] (==) Matched ati as autoconfigured driver 0
[ 3488.640] (==) Matched vesa as autoconfigured driver 1
[ 3488.640] (==) Matched fbdev as autoconfigured driver 2
[ 3488.640] (==) Assigned the driver to the xf86ConfigLayout
[ 3488.640] (II) LoadModule: "ati"
[ 3488.641] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 3488.641] (II) Module ati: vendor="X.Org Foundation"
[ 3488.641] compiled for 1.11.1.902, module version = 6.14.3
[ 3488.641] Module class: X.Org Video Driver
[ 3488.641] ABI class: X.Org Video Driver, version 11.0
[ 3488.641] (II) LoadModule: "radeon"
[ 3488.641] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 3488.641] (II) Module radeon: vendor="X.Org Foundation"
[ 3488.641] compiled for 1.11.1.902, module version = 6.14.3
[ 3488.641] Module class: X.Org Video Driver
[ 3488.641] ABI class: X.Org Video Driver, version 11.0
[ 3488.641] (II) LoadModule: "vesa"
[ 3488.642] (WW) Warning, couldn't open module vesa
[ 3488.642] (II) UnloadModule: "vesa"
[ 3488.642] (II) Unloading vesa
[ 3488.642] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 3488.642] (II) LoadModule: "fbdev"
[ 3488.642] (WW) Warning, couldn't open module fbdev
[ 3488.642] (II) UnloadModule: "fbdev"
[ 3488.642] (II) Unloading fbdev
[ 3488.642] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3488.642] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS
[ 3488.647] (++) using VT number 7
[ 3488.672] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 3488.672] (II) [KMS] drm report modesetting isn't supported.
[ 3488.672] (II) RADEON(0): TOTO SAYS 00000000efdf0000
[ 3488.672] (II) RADEON(0): MMIO registers at 0x00000000efdf0000: size 64KB
[ 3488.672] (II) RADEON(0): PCI bus 1 card 0 func 0
[ 3488.672] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3488.672] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 3488.672] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 3488.672] (==) RADEON(0): Default visual is TrueColor
[ 3488.672] (II) Loading sub module "vgahw"
[ 3488.672] (II) LoadModule: "vgahw"
[ 3488.672] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 3488.673] (II) Module vgahw: vendor="X.Org Foundation"
[ 3488.673] compiled for 1.11.3, module version = 0.1.0
[ 3488.673] ABI class: X.Org Video Driver, version 11.0
[ 3488.673] (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 3488.673] (==) RADEON(0): RGB weight 888
[ 3488.673] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 3488.673] (--) RADEON(0): Chipset: "ATI Mobility Radeon X1400" (ChipID = 0x7145)
[ 3488.673] (--) RADEON(0): Linear framebuffer at 0x00000000d0000000
[ 3488.673] (II) RADEON(0): PCIE card detected
[ 3488.673] (II) Loading sub module "int10"
[ 3488.673] (II) LoadModule: "int10"
[ 3488.673] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 3488.673] (II) Module int10: vendor="X.Org Foundation"
[ 3488.673] compiled for 1.11.3, module version = 1.0.0
[ 3488.673] ABI class: X.Org Video Driver, version 11.0
[ 3488.673] (II) RADEON(0): initializing int10
[ 3488.674] (II) RADEON(0): Primary V_BIOS segment is: 0xc000
[ 3488.674] (II) RADEON(0): ATOM BIOS detected
[ 3488.674] (II) RADEON(0): ATOM BIOS Rom:
[ 3488.674] SubsystemVendorID: 0x1028 SubsystemID: 0x2002
[ 3488.674] IOBaseAddress: 0xee00
[ 3488.674] Filename: BR19350.bin
[ 3488.674] BIOS Bootup Message:
ATI Mobility Radeon X1400
[ 3488.674] (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
[ 3488.674] (II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
[ 3488.674] (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
[ 3488.674] (II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
[ 3488.674] (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
[ 3488.674] (II) RADEON(0): Default Engine Clock: 432000
[ 3488.674] (II) RADEON(0): Default Memory Clock: 396000
[ 3488.674] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
[ 3488.674] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
[ 3488.674] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
[ 3488.674] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
[ 3488.674] (II) RADEON(0): Maximum Pixel Clock: 400000
[ 3488.674] (II) RADEON(0): Reference Clock: 27000
[ 3488.674] drmOpenDevice: node name is /dev/dri/card0
[ 3488.675] drmOpenDevice: open result is 10, (OK)
[ 3488.676] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 3488.676] drmOpenDevice: node name is /dev/dri/card0
[ 3488.676] drmOpenDevice: open result is 10, (OK)
[ 3488.676] drmOpenByBusid: drmOpenMinor returns 10
[ 3488.676] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 3488.677] (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.33.0
[ 3488.677] (==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
[ 3488.677] (II) RADEON(0): Will try to use DMA for Xv image transfers
[ 3488.677] (II) RADEON(0): Generation 2 PCI interface, using max accessible memory
[ 3488.677] (II) RADEON(0): Detected total video RAM=131072K, accessible=262144K (PCI BAR=262144K)
[ 3488.677] (--) RADEON(0): Mapped VideoRAM: 131072 kByte (64 bit DDR SDRAM)
[ 3488.677] (II) RADEON(0): Color tiling enabled by default
[ 3488.677] (II) Loading sub module "ddc"
[ 3488.677] (II) LoadModule: "ddc"
[ 3488.677] (II) Module "ddc" already built-in
[ 3488.677] (II) Loading sub module "i2c"
[ 3488.677] (II) LoadModule: "i2c"
[ 3488.677] (II) Module "i2c" already built-in
[ 3488.677] (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=90000 max=110000; xclk=40000
[ 3488.677] (WW) RADEON(0): LVDS Info:
XRes: 1440, YRes: 900, DotClock: 96210
HBlank: 320, HOverPlus: 64, HSyncWidth: 32
VBlank: 12, VOverPlus: 1, VSyncWidth: 3
[ 3488.677] (II) RADEON(0): Skipping TV-Out
[ 3488.677] (II) RADEON(0): Skipping Component Video
[ 3488.677] (II) RADEON(0): Output VGA-0 has no monitor section
[ 3488.678] (II) RADEON(0): I2C bus "VGA-0" initialized.
[ 3488.678] (II) RADEON(0): Output LVDS has no monitor section
[ 3488.678] (II) RADEON(0): I2C bus "LVDS" initialized.
[ 3488.678] (II) RADEON(0): Output DVI-0 has no monitor section
[ 3488.678] (II) RADEON(0): I2C bus "DVI-0" initialized.
[ 3488.678] (II) RADEON(0): Port0:
[ 3488.678] XRANDR name: VGA-0
[ 3488.678] Connector: VGA
[ 3488.678] CRT1: INTERNAL_KLDSCP_DAC1
[ 3488.678] DDC reg: 0x7e40
[ 3488.678] (II) RADEON(0): Port1:
[ 3488.678] XRANDR name: LVDS
[ 3488.678] Connector: LVDS
[ 3488.678] LCD1: INTERNAL_LVTM1
[ 3488.678] DDC reg: 0x7e30
[ 3488.678] (II) RADEON(0): Port2:
[ 3488.678] XRANDR name: DVI-0
[ 3488.678] Connector: DVI-I
[ 3488.678] CRT2: INTERNAL_KLDSCP_DAC2
[ 3488.678] DFP1: INTERNAL_KLDSCP_TMDS1
[ 3488.678] DDC reg: 0x7e50
[ 3488.678] (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
[ 3488.716] Dac detection success
[ 3488.716] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[ 3488.716] finished output detect: 0
[ 3488.716] (II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
[ 3488.789] (II) RADEON(0): EDID for output LVDS
[ 3488.789] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3488.789] (II) RADEON(0): Year: 2005 Week: 0
[ 3488.789] (II) RADEON(0): EDID Version: 1.3
[ 3488.789] (II) RADEON(0): Digital Display Input
[ 3488.789] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 3488.789] (II) RADEON(0): Gamma: 2.20
[ 3488.789] (II) RADEON(0): No DPMS capabilities specified
[ 3488.789] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3488.789] (II) RADEON(0): First detailed timing is preferred mode
[ 3488.789] (II) RADEON(0): redX: 0.592 redY: 0.344 greenX: 0.319 greenY: 0.553
[ 3488.789] (II) RADEON(0): blueX: 0.159 blueY: 0.144 whiteX: 0.312 whiteY: 0.328
[ 3488.789] (II) RADEON(0): Manufacturer's mask: 0
[ 3488.789] (II) RADEON(0): Supported detailed timing:
[ 3488.789] (II) RADEON(0): clock: 96.2 MHz Image Size: 367 x 23000 mm
[ 3488.789] (II) RADEON(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 3488.789] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 3488.789] (II) RADEON(0): WR539171WX2
[ 3488.789] (II) RADEON(0): &5@Im
[ 3488.789] (II) RADEON(0): EDID (in hex):
[ 3488.789] (II) RADEON(0): 00ffffffffffff00320c000000000000
[ 3488.789] (II) RADEON(0): 000f0103802517780a8ef09758518d28
[ 3488.789] (II) RADEON(0): 24505400000001010101010101010101
[ 3488.789] (II) RADEON(0): 0101010101019525a04051840c304020
[ 3488.789] (II) RADEON(0): 13006fe6100000190000000000000000
[ 3488.789] (II) RADEON(0): 00000000000000000000000000fe0057
[ 3488.789] (II) RADEON(0): 52353339013137315758320a000000fe
[ 3488.789] (II) RADEON(0): 00263540496d9dc8ff02010a202000c3
[ 3488.789] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[ 3488.789] (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
[ 3488.789] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3488.789] (II) RADEON(0): Year: 2005 Week: 0
[ 3488.789] (II) RADEON(0): EDID Version: 1.3
[ 3488.789] (II) RADEON(0): Digital Display Input
[ 3488.789] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 3488.789] (II) RADEON(0): Gamma: 2.20
[ 3488.789] (II) RADEON(0): No DPMS capabilities specified
[ 3488.789] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3488.789] (II) RADEON(0): First detailed timing is preferred mode
[ 3488.789] (II) RADEON(0): redX: 0.592 redY: 0.344 greenX: 0.319 greenY: 0.553
[ 3488.789] (II) RADEON(0): blueX: 0.159 blueY: 0.144 whiteX: 0.312 whiteY: 0.328
[ 3488.789] (II) RADEON(0): Manufacturer's mask: 0
[ 3488.789] (II) RADEON(0): Supported detailed timing:
[ 3488.789] (II) RADEON(0): clock: 96.2 MHz Image Size: 367 x 2300000 mm
[ 3488.789] (II) RADEON(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 3488.789] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 3488.789] (II) RADEON(0): WR539171WX2
[ 3488.789] (II) RADEON(0): &5@Im
[ 3488.789] (II) RADEON(0): EDID (in hex):
[ 3488.789] (II) RADEON(0): 00ffffffffffff00320c000000000000
[ 3488.789] (II) RADEON(0): 000f0103802517780a8ef09758518d28
[ 3488.789] (II) RADEON(0): 24505400000001010101010101010101
[ 3488.789] (II) RADEON(0): 0101010101019525a04051840c304020
[ 3488.789] (II) RADEON(0): 13006fe6100000190000000000000000
[ 3488.789] (II) RADEON(0): 00000000000000000000000000fe0057
[ 3488.789] (II) RADEON(0): 52353339013137315758320a000000fe
[ 3488.789] (II) RADEON(0): 00263540496d9dc8ff02010a202000c3
[ 3488.789] finished output detect: 1
[ 3488.790] (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
[ 3488.827] Dac detection success
[ 3488.827] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[ 3488.827] Unhandled monitor type 0
[ 3488.827] finished output detect: 2
[ 3488.827] finished all detect
[ 3488.866] Dac detection success
[ 3488.866] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[ 3488.866] (II) RADEON(0): EDID for output VGA-0
[ 3488.938] (II) RADEON(0): EDID for output LVDS
[ 3488.939] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3488.939] (II) RADEON(0): Year: 2005 Week: 0
[ 3488.939] (II) RADEON(0): EDID Version: 1.3
[ 3488.939] (II) RADEON(0): Digital Display Input
[ 3488.939] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 3488.939] (II) RADEON(0): Gamma: 2.20
[ 3488.939] (II) RADEON(0): No DPMS capabilities specified
[ 3488.939] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3488.939] (II) RADEON(0): First detailed timing is preferred mode
[ 3488.939] (II) RADEON(0): redX: 0.592 redY: 0.344 greenX: 0.319 greenY: 0.553
[ 3488.939] (II) RADEON(0): blueX: 0.159 blueY: 0.144 whiteX: 0.312 whiteY: 0.328
[ 3488.939] (II) RADEON(0): Manufacturer's mask: 0
[ 3488.939] (II) RADEON(0): Supported detailed timing:
[ 3488.939] (II) RADEON(0): clock: 96.2 MHz Image Size: 367 x 23000 mm
[ 3488.939] (II) RADEON(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 3488.939] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 3488.939] (II) RADEON(0): WR539171WX2
[ 3488.939] (II) RADEON(0): &5@Im
[ 3488.939] (II) RADEON(0): EDID (in hex):
[ 3488.939] (II) RADEON(0): 00ffffffffffff00320c000000000000
[ 3488.939] (II) RADEON(0): 000f0103802517780a8ef09758518d28
[ 3488.939] (II) RADEON(0): 24505400000001010101010101010101
[ 3488.939] (II) RADEON(0): 0101010101019525a04051840c304020
[ 3488.939] (II) RADEON(0): 13006fe6100000190000000000000000
[ 3488.939] (II) RADEON(0): 00000000000000000000000000fe0057
[ 3488.939] (II) RADEON(0): 52353339013137315758320a000000fe
[ 3488.939] (II) RADEON(0): 00263540496d9dc8ff02010a202000c3
[ 3488.939] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[ 3488.939] (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
[ 3488.939] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3488.939] (II) RADEON(0): Year: 2005 Week: 0
[ 3488.939] (II) RADEON(0): EDID Version: 1.3
[ 3488.939] (II) RADEON(0): Digital Display Input
[ 3488.939] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 3488.939] (II) RADEON(0): Gamma: 2.20
[ 3488.939] (II) RADEON(0): No DPMS capabilities specified
[ 3488.939] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3488.939] (II) RADEON(0): First detailed timing is preferred mode
[ 3488.939] (II) RADEON(0): redX: 0.592 redY: 0.344 greenX: 0.319 greenY: 0.553
[ 3488.939] (II) RADEON(0): blueX: 0.159 blueY: 0.144 whiteX: 0.312 whiteY: 0.328
[ 3488.939] (II) RADEON(0): Manufacturer's mask: 0
[ 3488.939] (II) RADEON(0): Supported detailed timing:
[ 3488.939] (II) RADEON(0): clock: 96.2 MHz Image Size: 367 x 2300000 mm
[ 3488.939] (II) RADEON(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 3488.939] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 3488.939] (II) RADEON(0): WR539171WX2
[ 3488.939] (II) RADEON(0): &5@Im
[ 3488.939] (II) RADEON(0): EDID (in hex):
[ 3488.939] (II) RADEON(0): 00ffffffffffff00320c000000000000
[ 3488.939] (II) RADEON(0): 000f0103802517780a8ef09758518d28
[ 3488.939] (II) RADEON(0): 24505400000001010101010101010101
[ 3488.939] (II) RADEON(0): 0101010101019525a04051840c304020
[ 3488.939] (II) RADEON(0): 13006fe6100000190000000000000000
[ 3488.939] (II) RADEON(0): 00000000000000000000000000fe0057
[ 3488.939] (II) RADEON(0): 52353339013137315758320a000000fe
[ 3488.939] (II) RADEON(0): 00263540496d9dc8ff02010a202000c3
[ 3488.939] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3488.939] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3488.939] (II) RADEON(0): Printing probed modes for output LVDS
[ 3488.939] (II) RADEON(0): Modeline "1440x900"x59.9 96.21 1440 1504 1536 1760 900 901 904 912 -hsync -vsync (54.7 kHz)
[ 3488.940] (II) RADEON(0): Modeline "1280x854"x59.9 89.25 1280 1352 1480 1680 854 857 867 887 -hsync +vsync (53.1 kHz)
[ 3488.940] (II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 3488.940] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 3488.940] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 3488.940] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 3488.940] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 3488.940] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 3488.977] Dac detection success
[ 3488.977] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[ 3488.977] Unhandled monitor type 0
[ 3488.977] (II) RADEON(0): EDID for output DVI-0
[ 3488.977] (II) RADEON(0): Output VGA-0 disconnected
[ 3488.977] (II) RADEON(0): Output LVDS connected
[ 3488.977] (II) RADEON(0): Output DVI-0 disconnected
[ 3488.977] (II) RADEON(0): Using exact sizes for initial modes
[ 3488.977] (II) RADEON(0): Output LVDS using initial mode 1440x900
[ 3488.977] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 3488.977] (==) RADEON(0): DPI set to (96, 96)
[ 3488.977] (II) Loading sub module "fb"
[ 3488.977] (II) LoadModule: "fb"
[ 3488.978] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3488.978] (II) Module fb: vendor="X.Org Foundation"
[ 3488.978] compiled for 1.11.3, module version = 1.0.0
[ 3488.978] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3488.978] (II) Loading sub module "ramdac"
[ 3488.978] (II) LoadModule: "ramdac"
[ 3488.978] (II) Module "ramdac" already built-in
[ 3488.978] (==) RADEON(0): Using EXA acceleration architecture
[ 3488.978] (II) Loading sub module "exa"
[ 3488.978] (II) LoadModule: "exa"
[ 3488.978] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 3488.978] (II) Module exa: vendor="X.Org Foundation"
[ 3488.978] compiled for 1.11.3, module version = 2.5.0
[ 3488.978] ABI class: X.Org Video Driver, version 11.0
[ 3488.978] (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
[ 3488.978] (--) Depth 24 pixmap format is 32 bpp
[ 3488.978] (II) RADEON(0): RADEONScreenInit d0000000 0 0
[ 3489.284] Output LCD1 disable success
[ 3489.295] Blank CRTC 0 success
[ 3489.295] Disable CRTC 0 success
[ 3489.295] Blank CRTC 1 success
[ 3489.295] Disable CRTC 1 success
[ 3489.295] (II) RADEON(0): Dynamic Power Management Disabled
[ 3489.295] (==) RADEON(0): Using 24 bit depth buffer
[ 3489.295] (II) RADEON(0): RADEONInitMemoryMap() :
[ 3489.295] (II) RADEON(0): mem_size : 0x08000000
[ 3489.295] (II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
[ 3489.295] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
[ 3489.295] (II) RADEON(0): Depth moves disabled by default
[ 3489.295] (II) RADEON(0): Allocating from a screen of 131040 kb
[ 3489.295] (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00816000
[ 3489.295] (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x0081a000
[ 3489.295] (II) RADEON(0): Will use 8280 kb for front buffer at offset 0x00000000
[ 3489.295] (II) RADEON(0): Will use 32 kb for PCI GART at offset 0x07ff8000
[ 3489.295] (II) RADEON(0): Will use 8280 kb for back buffer at offset 0x0081e000
[ 3489.295] (II) RADEON(0): Will use 8280 kb for depth buffer at offset 0x01034000
[ 3489.295] (II) RADEON(0): Will use 52736 kb for textures at offset 0x0184a000
[ 3489.295] (II) RADEON(0): Will use 53432 kb for X Server offscreen at offset 0x04bca000
[ 3489.296] drmOpenDevice: node name is /dev/dri/card0
[ 3489.296] drmOpenDevice: open result is 10, (OK)
[ 3489.297] drmOpenDevice: node name is /dev/dri/card0
[ 3489.298] drmOpenDevice: open result is 10, (OK)
[ 3489.298] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 3489.298] drmOpenDevice: node name is /dev/dri/card0
[ 3489.299] drmOpenDevice: open result is 10, (OK)
[ 3489.299] drmOpenByBusid: drmOpenMinor returns 10
[ 3489.299] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 3489.299] (II) [drm] DRM interface version 1.4
[ 3489.299] (II) [drm] DRM open master succeeded.
[ 3489.299] (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
[ 3489.299] (II) RADEON(0): [drm] framebuffer handle = 0xd0000000
[ 3489.299] (II) RADEON(0): [drm] added 1 reserved context for kernel
[ 3489.299] (II) RADEON(0): X context handle = 0x1
[ 3489.299] (II) RADEON(0): [drm] installed DRM signal handler
[ 3489.316] (II) RADEON(0): [pci] 32768 kB allocated with handle 0xf9ed9000
[ 3489.317] (II) RADEON(0): [pci] ring handle = 0xf9ed9000
[ 3489.317] (II) RADEON(0): [pci] Ring mapped at 0xb6fcf000
[ 3489.317] (II) RADEON(0): [pci] Ring contents 0x00000000
[ 3489.317] (II) RADEON(0): [pci] ring read ptr handle = 0xf9fda000
[ 3489.317] (II) RADEON(0): [pci] Ring read ptr mapped at 0xb76f7000
[ 3489.317] (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
[ 3489.317] (II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf9fdb000
[ 3489.317] (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xaed21000
[ 3489.317] (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
[ 3489.317] (II) RADEON(0): [pci] GART texture map handle = 0xfa1db000
[ 3489.317] (II) RADEON(0): [pci] GART Texture map mapped at 0xad0a1000
[ 3489.317] (II) RADEON(0): [drm] register handle = 0x2dfbe000
[ 3489.317] (II) RADEON(0): [dri] Visual configs initialized
[ 3489.317] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[ 3489.317] (II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
[ 3489.317] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
[ 3489.317] (==) RADEON(0): Backing store disabled
[ 3489.317] (II) RADEON(0): [DRI] installation complete
[ 3489.320] (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
[ 3489.320] (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
[ 3489.320] (II) RADEON(0): [drm] dma control initialized, using IRQ 16
[ 3489.320] (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
[ 3489.320] (WW) RADEON(0): DRI init changed memory map, adjusting ...
[ 3489.320] (WW) RADEON(0): MC_FB_LOCATION was: 0xd7ffd000 is: 0xd7ffd000
[ 3489.320] (WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
[ 3489.320] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[ 3489.320] (II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
[ 3489.320] (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
[ 3489.320] (II) RADEON(0): Direct rendering enabled
[ 3489.320] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 3489.320] (II) RADEON(0): Setting EXA maxPitchBytes
[ 3489.320] (II) RADEON(0): num quad-pipes is 1
[ 3489.320] (II) EXA(0): Offscreen pixmap area of 54714368 bytes
[ 3489.320] (II) EXA(0): Driver registered support for the following operations:
[ 3489.320] (II) Solid
[ 3489.320] (II) Copy
[ 3489.320] (II) Composite (RENDER acceleration)
[ 3489.320] (II) UploadToScreen
[ 3489.320] (II) DownloadFromScreen
[ 3489.320] (II) RADEON(0): Acceleration enabled
[ 3489.320] (==) RADEON(0): DPMS enabled
[ 3489.320] (==) RADEON(0): Silken mouse enabled
[ 3489.320] (II) RADEON(0): Set up textured video
[ 3489.320] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 3489.320] (II) RADEON(0): [XvMC] Extension initialized.
[ 3489.325] Output CRT1 disable success
[ 3489.325] Output LCD1 disable success
[ 3489.325] Blank CRTC 0 success
[ 3489.325] Disable CRTC 0 success
[ 3489.325] Blank CRTC 1 success
[ 3489.325] Disable CRTC 1 success
[ 3489.325] Output LCD1 disable success
[ 3489.325] Blank CRTC 0 success
[ 3489.325] Disable CRTC 0 success
[ 3489.325] Set CRTC 0 Source success
[ 3489.325] Mode 1440x900 - 1760 912 10
[ 3489.325] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[ 3489.325] (II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
[ 3489.325] (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
[ 3489.325] Picked PLL 0
[ 3489.325] best_freq: 96340
[ 3489.325] best_feedback_div: 157
[ 3489.325] best_frac_feedback_div: 0
[ 3489.325] best_ref_div: 4
[ 3489.325] best_post_div: 11
[ 3489.325] (II) RADEON(0): crtc(0) Clock: mode 96210, PLL 963400
[ 3489.325] (II) RADEON(0): crtc(0) PLL : refdiv 4, fbdiv 0x9D(157), fracfbdiv 0, pdiv 11
[ 3489.328] Set CRTC 0 PLL success
[ 3489.328] Set CRTC Timing success
[ 3489.328] Set CRTC 0 Overscan success
[ 3489.328] Not using RMX
[ 3489.328] scaler 0 setup success
[ 3489.328] Set CRTC 0 Source success
[ 3489.328] crtc 0 YUV disable setup success
[ 3489.329] Output digital setup success
[ 3489.788] Output LCD1 enable success
[ 3489.788] Enable CRTC 0 success
[ 3489.804] Unblank CRTC 0 success
[ 3489.804] Output CRT1 disable success
[ 3489.804] Blank CRTC 1 success
[ 3489.804] Disable CRTC 1 success
[ 3489.805] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3489.805] (--) RandR disabled
[ 3489.805] (II) Initializing built-in extension Generic Event Extension
[ 3489.805] (II) Initializing built-in extension SHAPE
[ 3489.805] (II) Initializing built-in extension MIT-SHM
[ 3489.805] (II) Initializing built-in extension XInputExtension
[ 3489.805] (II) Initializing built-in extension XTEST
[ 3489.805] (II) Initializing built-in extension BIG-REQUESTS
[ 3489.805] (II) Initializing built-in extension SYNC
[ 3489.805] (II) Initializing built-in extension XKEYBOARD
[ 3489.805] (II) Initializing built-in extension XC-MISC
[ 3489.805] (II) Initializing built-in extension SECURITY
[ 3489.805] (II) Initializing built-in extension XINERAMA
[ 3489.805] (II) Initializing built-in extension XFIXES
[ 3489.805] (II) Initializing built-in extension RENDER
[ 3489.805] (II) Initializing built-in extension RANDR
[ 3489.805] (II) Initializing built-in extension COMPOSITE
[ 3489.805] (II) Initializing built-in extension DAMAGE
[ 3489.818] (II) AIGLX: Screen 0 is not DRI2 capable
[ 3489.818] drmOpenDevice: node name is /dev/dri/card0
[ 3489.818] drmOpenDevice: open result is 11, (OK)
[ 3489.818] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 3489.818] drmOpenDevice: node name is /dev/dri/card0
[ 3489.818] drmOpenDevice: open result is 11, (OK)
[ 3489.818] drmOpenByBusid: drmOpenMinor returns 11
[ 3489.818] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 3489.818] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 3489.836] (EE) AIGLX error: Calling driver entry point failed
[ 3489.853] (EE) AIGLX: reverting to software rendering
[ 3489.856] (II) AIGLX: Loaded and initialized swrast
[ 3489.856] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 3489.857] (II) RADEON(0): Setting screen physical size to 380 x 238
[ 3490.017] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 3490.017] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3490.017] (II) LoadModule: "evdev"
[ 3490.018] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3490.018] (II) Module evdev: vendor="X.Org Foundation"
[ 3490.018] compiled for 1.10.99.902, module version = 2.6.0
[ 3490.018] Module class: X.Org XInput Driver
[ 3490.018] ABI class: X.Org XInput driver, version 13.0
[ 3490.018] (II) Using input driver 'evdev' for 'Video Bus'
[ 3490.018] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3490.018] (**) Video Bus: always reports core events
[ 3490.018] (**) Video Bus: Device: "/dev/input/event4"
[ 3490.018] (--) Video Bus: Found keys
[ 3490.018] (II) Video Bus: Configuring as keyboard
[ 3490.018] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2b/LNXVIDEO:00/input/input4/event4"
[ 3490.018] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 3490.018] (**) Option "xkb_rules" "evdev"
[ 3490.018] (**) Option "xkb_model" "evdev"
[ 3490.018] (**) Option "xkb_layout" "us"
[ 3490.078] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 3490.078] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3490.078] (II) Using input driver 'evdev' for 'Power Button'
[ 3490.078] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3490.078] (**) Power Button: always reports core events
[ 3490.078] (**) Power Button: Device: "/dev/input/event2"
[ 3490.078] (--) Power Button: Found keys
[ 3490.078] (II) Power Button: Configuring as keyboard
[ 3490.078] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 3490.078] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 3490.078] (**) Option "xkb_rules" "evdev"
[ 3490.079] (**) Option "xkb_model" "evdev"
[ 3490.079] (**) Option "xkb_layout" "us"
[ 3490.079] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 3490.079] (II) No input driver/identifier specified (ignoring)
[ 3490.080] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 3490.080] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3490.080] (II) Using input driver 'evdev' for 'Sleep Button'
[ 3490.080] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3490.080] (**) Sleep Button: always reports core events
[ 3490.080] (**) Sleep Button: Device: "/dev/input/event3"
[ 3490.080] (--) Sleep Button: Found keys
[ 3490.080] (II) Sleep Button: Configuring as keyboard
[ 3490.080] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 3490.080] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 3490.080] (**) Option "xkb_rules" "evdev"
[ 3490.080] (**) Option "xkb_model" "evdev"
[ 3490.080] (**) Option "xkb_layout" "us"
[ 3490.080] (II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event7)
[ 3490.080] (II) No input driver/identifier specified (ignoring)
[ 3490.081] (II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event8)
[ 3490.081] (II) No input driver/identifier specified (ignoring)
[ 3490.081] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event9)
[ 3490.081] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 3490.081] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 3490.081] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3490.081] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 3490.081] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event9"
[ 3490.081] (--) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[ 3490.081] (--) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 3490.081] (--) Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 3490.081] (--) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 3490.082] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 3490.082] (II) Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 3490.082] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 3490.082] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3490.082] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input9/event9"
[ 3490.082] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[ 3490.082] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 3490.082] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 3490.082] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 3490.082] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 3490.082] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 3490.082] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1)
[ 3490.082] (II) No input driver/identifier specified (ignoring)
[ 3490.083] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3490.083] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3490.083] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3490.083] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3490.083] (**) AT Translated Set 2 keyboard: always reports core events
[ 3490.083] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3490.083] (--) AT Translated Set 2 keyboard: Found keys
[ 3490.083] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 3490.083] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3490.083] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 3490.083] (**) Option "xkb_rules" "evdev"
[ 3490.083] (**) Option "xkb_model" "evdev"
[ 3490.083] (**) Option "xkb_layout" "us"
[ 3490.084] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 3490.084] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3490.084] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3490.084] (II) LoadModule: "synaptics"
[ 3490.084] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3490.084] (II) Module synaptics: vendor="X.Org Foundation"
[ 3490.084] compiled for 1.11.0, module version = 1.5.0
[ 3490.084] Module class: X.Org XInput Driver
[ 3490.084] ABI class: X.Org XInput driver, version 13.0
[ 3490.084] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3490.084] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3490.084] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3490.084] (**) Option "Device" "/dev/input/event6"
[ 3490.296] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 3490.296] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 3490.296] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3490.296] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 3490.296] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 3490.296] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3490.296] (**) Option "TapButton1" "1"
[ 3490.296] (**) Option "TapButton2" "2"
[ 3490.296] (**) Option "TapButton3" "3"
[ 3490.403] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3490.403] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3490.509] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 3490.509] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 3490.509] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3490.509] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 3490.509] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 3490.510] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3490.510] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3490.510] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3490.510] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3490.510] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3490.510] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3490.510] (II) No input driver/identifier specified (ignoring)
[ 3490.511] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[ 3490.511] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 3490.511] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 3490.511] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3490.511] (**) Dell WMI hotkeys: always reports core events
[ 3490.511] (**) Dell WMI hotkeys: Device: "/dev/input/event5"
[ 3490.511] (--) Dell WMI hotkeys: Found keys
[ 3490.511] (II) Dell WMI hotkeys: Configuring as keyboard
[ 3490.511] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 3490.511] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[ 3490.511] (**) Option "xkb_rules" "evdev"
[ 3490.511] (**) Option "xkb_model" "evdev"
[ 3490.511] (**) Option "xkb_layout" "us"
[ 3497.781] Dac detection success
[ 3497.781] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[ 3497.842] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3497.842] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3497.842] (II) RADEON(0): Printing DDC gathered Modelines:
[ 3497.842] (II) RADEON(0): Modeline "1440x900"x0.0 96.21 1440 1504 1536 1760 900 901 904 912 -hsync -vsync (54.7 kHz)
[ 3497.842] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[ 3497.842] (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
[ 3497.842] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3497.842] (II) RADEON(0): Year: 2005 Week: 0
[ 3497.842] (II) RADEON(0): EDID Version: 1.3
[ 3497.842] (II) RADEON(0): Digital Display Input
[ 3497.842] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 3497.842] (II) RADEON(0): Gamma: 2.20
[ 3497.842] (II) RADEON(0): No DPMS capabilities specified
[ 3497.842] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3497.842] (II) RADEON(0): First detailed timing is preferred mode
[ 3497.842] (II) RADEON(0): redX: 0.592 redY: 0.344 greenX: 0.319 greenY: 0.553
[ 3497.842] (II) RADEON(0): blueX: 0.159 blueY: 0.144 whiteX: 0.312 whiteY: 0.328
[ 3497.842] (II) RADEON(0): Manufacturer's mask: 0
[ 3497.842] (II) RADEON(0): Supported detailed timing:
[ 3497.842] (II) RADEON(0): clock: 96.2 MHz Image Size: 367 x 2300000 mm
[ 3497.842] (II) RADEON(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 3497.842] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 3497.842] (II) RADEON(0): WR539171WX2
[ 3497.842] (II) RADEON(0): &5@Im
[ 3497.842] (II) RADEON(0): EDID (in hex):
[ 3497.842] (II) RADEON(0): 00ffffffffffff00320c000000000000
[ 3497.842] (II) RADEON(0): 000f0103802517780a8ef09758518d28
[ 3497.842] (II) RADEON(0): 24505400000001010101010101010101
[ 3497.842] (II) RADEON(0): 0101010101019525a04051840c304020
[ 3497.842] (II) RADEON(0): 13006fe6100000190000000000000000
[ 3497.843] (II) RADEON(0): 00000000000000000000000000fe0057
[ 3497.843] (II) RADEON(0): 52353339013137315758320a000000fe
[ 3497.843] (II) RADEON(0): 00263540496d9dc8ff02010a202000c3
[ 3497.843] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3497.843] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3497.876] Dac detection success
[ 3497.876] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[ 3497.876] Unhandled monitor type 0
[ 3497.920] Dac detection success
[ 3497.920] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[ 3497.980] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3497.980] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3497.980] (II) RADEON(0): Printing DDC gathered Modelines:
[ 3497.980] (II) RADEON(0): Modeline "1440x900"x0.0 96.21 1440 1504 1536 1760 900 901 904 912 -hsync -vsync (54.7 kHz)
[ 3497.980] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[ 3497.980] (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
[ 3497.980] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3497.980] (II) RADEON(0): Year: 2005 Week: 0
[ 3497.980] (II) RADEON(0): EDID Version: 1.3
[ 3497.980] (II) RADEON(0): Digital Display Input
[ 3497.980] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 3497.980] (II) RADEON(0): Gamma: 2.20
[ 3497.980] (II) RADEON(0): No DPMS capabilities specified
[ 3497.980] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3497.980] (II) RADEON(0): First detailed timing is preferred mode
[ 3497.980] (II) RADEON(0): redX: 0.592 redY: 0.344 greenX: 0.319 greenY: 0.553
[ 3497.980] (II) RADEON(0): blueX: 0.159 blueY: 0.144 whiteX: 0.312 whiteY: 0.328
[ 3497.980] (II) RADEON(0): Manufacturer's mask: 0
[ 3497.980] (II) RADEON(0): Supported detailed timing:
[ 3497.980] (II) RADEON(0): clock: 96.2 MHz Image Size: 367 x 2300000 mm
[ 3497.981] (II) RADEON(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 3497.981] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 3497.981] (II) RADEON(0): WR539171WX2
[ 3497.981] (II) RADEON(0): &5@Im
[ 3497.981] (II) RADEON(0): EDID (in hex):
[ 3497.981] (II) RADEON(0): 00ffffffffffff00320c000000000000
[ 3497.981] (II) RADEON(0): 000f0103802517780a8ef09758518d28
[ 3497.981] (II) RADEON(0): 24505400000001010101010101010101
[ 3497.981] (II) RADEON(0): 0101010101019525a04051840c304020
[ 3497.981] (II) RADEON(0): 13006fe6100000190000000000000000
[ 3497.981] (II) RADEON(0): 00000000000000000000000000fe0057
[ 3497.981] (II) RADEON(0): 52353339013137315758320a000000fe
[ 3497.981] (II) RADEON(0): 00263540496d9dc8ff02010a202000c3
[ 3497.981] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3497.981] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3498.015] Dac detection success
[ 3498.015] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[ 3498.015] Unhandled monitor type 0
[ 3498.063] Dac detection success
[ 3498.063] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[ 3498.124] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3498.124] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3498.124] (II) RADEON(0): Printing DDC gathered Modelines:
[ 3498.124] (II) RADEON(0): Modeline "1440x900"x0.0 96.21 1440 1504 1536 1760 900 901 904 912 -hsync -vsync (54.7 kHz)
[ 3498.124] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[ 3498.124] (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
[ 3498.124] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3498.124] (II) RADEON(0): Year: 2005 Week: 0
[ 3498.124] (II) RADEON(0): EDID Version: 1.3
[ 3498.124] (II) RADEON(0): Digital Display Input
[ 3498.124] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 3498.124] (II) RADEON(0): Gamma: 2.20
[ 3498.124] (II) RADEON(0): No DPMS capabilities specified
[ 3498.124] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3498.124] (II) RADEON(0): First detailed timing is preferred mode
[ 3498.124] (II) RADEON(0): redX: 0.592 redY: 0.344 greenX: 0.319 greenY: 0.553
[ 3498.124] (II) RADEON(0): blueX: 0.159 blueY: 0.144 whiteX: 0.312 whiteY: 0.328
[ 3498.124] (II) RADEON(0): Manufacturer's mask: 0
[ 3498.124] (II) RADEON(0): Supported detailed timing:
[ 3498.124] (II) RADEON(0): clock: 96.2 MHz Image Size: 367 x 2300000 mm
[ 3498.124] (II) RADEON(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 3498.124] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 3498.124] (II) RADEON(0): WR539171WX2
[ 3498.124] (II) RADEON(0): &5@Im
[ 3498.124] (II) RADEON(0): EDID (in hex):
[ 3498.124] (II) RADEON(0): 00ffffffffffff00320c000000000000
[ 3498.124] (II) RADEON(0): 000f0103802517780a8ef09758518d28
[ 3498.124] (II) RADEON(0): 24505400000001010101010101010101
[ 3498.124] (II) RADEON(0): 0101010101019525a04051840c304020
[ 3498.124] (II) RADEON(0): 13006fe6100000190000000000000000
[ 3498.124] (II) RADEON(0): 00000000000000000000000000fe0057
[ 3498.124] (II) RADEON(0): 52353339013137315758320a000000fe
[ 3498.124] (II) RADEON(0): 00263540496d9dc8ff02010a202000c3
[ 3498.124] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3498.124] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3498.158] Dac detection success
[ 3498.158] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[ 3498.158] Unhandled monitor type 0
[ 3498.192] Dac detection success
[ 3498.192] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[ 3498.253] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3498.253] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3498.253] (II) RADEON(0): Printing DDC gathered Modelines:
[ 3498.253] (II) RADEON(0): Modeline "1440x900"x0.0 96.21 1440 1504 1536 1760 900 901 904 912 -hsync -vsync (54.7 kHz)
[ 3498.253] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[ 3498.253] (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
[ 3498.253] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3498.253] (II) RADEON(0): Year: 2005 Week: 0
[ 3498.253] (II) RADEON(0): EDID Version: 1.3
[ 3498.253] (II) RADEON(0)Ok, compilation successful with the above patch applied. I also rebooted to make sure everything will get loaded for scratch and applied export CLUTTER_VBLANK=none in /etc/environment. So far:
1) Fonts are looking just fine, no artifacts whatsoever in the panel or elsewhere I got so far.
2) Applications menu still crash.
3) GTK2 applications also crash. I opened up leafpad, it run, but failed to open a file and crashed the entired desktop. I have no oxygen-gtk installed on my system.
Generally speaking I like GNOME 3 quite much, not as much as GNOME 2, but crashing the whole desktop by just one application or just something less importand like the menu, its just a show stopper. I hope they will somehow fix these issues in the next releases.
Last edited by twilight0 (2011-12-05 23:16:04) -
Help Required...Web Service does not start automatically...
I have a web service created with a EJB, everything is fine now.
After restarting the Server, web service doesn't get start automatically.
I have done the changes for the EJB - .ear project - application-j2ee-engine.xml file with the below.
<start-up mode="always"/>
But it still doesnt start. any help is appreciated.
This is the document i have referred.
http://help.sap.com/saphelp_nw04s/helpdata/en/25/0c08f3981343609d4045f8acaa0a76/frameset.htm
Thanks,
Sridhar
Edited by: Sridhar k on Jan 5, 2009 9:11 AMHai,
Just a tought...:-|
Check the value in your file, is it typing mistake or you have entered the same in your file.
<start-up mode="always"/> it should be <start-up mode="always">.
Regards,
Yoganand.V -
Numlockx will not start automatically no matter what
First off, I am running Archlinux 64 and I have setup numlockx many times without any problems. This time however I cannot get it to start automatically when I startx. I have it listed in my ~/.xinitrc before my desktop enviroment;
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
# exec xterm
xscreensaver -no-splash &
numlockx &
# exec startxfce4
exec openbox-session
# ... or any other WM of your choosing ...
I even tried putting it in my ~/.config/openbox/autostart.sh file:
## Run the system-wide support stuff
#.$GLOBALAUTOSTART
(sleep 2 && nitrogen --restore) &
# Programsms that will run after Openbox has started
(sleep 2 && tint) &
(sleep 2 && conky) &
(sleep 2 && DISPLAY=:0.1 openbox) &
(sleep 2 && gnome-settings-daemon) &
(sleep 2 && numlockx) &
(sleep 4 && amixer sset Front 90% unmute && espeak -ven -s145 "Welcome Master. I am here to serve you. It is `date +%H` `date +%M`.") &
If I run it manually, it works perfectly.
Any ideals?
Thanks
BTW Everything else autostarts just fine.
Last edited by securitybreach (2009-02-28 16:21:25)Hi did you sort out this problem cause i have the same issues use to work fine.
Like you say works fine from terminal.
Edit seems to work if i use dm ie slim
Last edited by jazz452 (2009-08-24 08:41:27) -
The kde can't start automatically
I had been using GNOME and initscripts.
and transit to systemd and KDE recently.
after "systemctl enable kde.service" and reoot, I got the console shell, but not kde, of cause, I can login with console, and "systemctl start kde" to start KDE,
but why the KDE can't start automatically?
I have checked the log, but got nothing.you should have got an error somewhere when enabling "kde.service," because that service doesn't exist. KDE's login manager is kdm. you should do
systemctl enable kdm.service
instead. to start the service immediately, type (after the above):
systemctl start kdm.service
and you should get KDE's login manager. -
Just got an iphone but mail doesnt collect automatically - push or fetch??
I have just started using my new iphone but noticed that the mail doesnt collect automatically. I have successfully setup up my hotmail plus account and if I click on mail it will search and update new mail but I was under the impression that it would frequently search for mail without me having to do that using the 3G technology by accessing my email server? I am currently set to "push" data should I be fetching instead?
Push email account access is supported with an Exchange account, a MobileMe account, and with a Yahoo account when using the Yahoo account preset when creating the account with the iPhone's mail client.
-
My Imac doesnt start after de pasword, It continuos asking for it again and again, what can I do to start it?
First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combination command-space or command-option-space. See this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, start up in Recovery mode. When the OS X Utilities window appears, select
Utilities ▹ Terminal
from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions. -
well it seemed that gnomeosd was causing an error on enteing on gnome with gdm..well it i removed it and gnome gets stuck ...the panel doesnt start it even boot the process..xsessions-errors does not show anything..some help ppl?
/opt/gnome/etc/gdm/PreSession/Default: Registering your session with wtmp and utmp
/opt/gnome/etc/gdm/PreSession/Default: running: /usr/bin/sessreg -a -w /var/log/wtmp -u /var/run/utmp -x "/opt/gnome/var/gdm/:0.Xservers" -h "" -l ":0" "sickhate"
/opt/gnome/etc/gdm/Xsession: Beginning session setup...
/opt/gnome/etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- /opt/gnome/bin/gnome-session
SESSION_MANAGER=local/aRcHaTe:/tmp/.ICE-unix/5724
/opt/gnome/etc/gdm/PreSession/Default: Registering your session with wtmp and utmp
/opt/gnome/etc/gdm/PreSession/Default: running: /usr/bin/sessreg -a -w /var/log/wtmp -u /var/run/utmp -x "/opt/gnome/var/gdm/:20.Xservers" -h "" -l ":20" "sickhate"
/opt/gnome/etc/gdm/Xsession: Beginning session setup...
/opt/gnome/etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- /opt/gnome/bin/gnome-session
SESSION_MANAGER=local/aRcHaTe:/tmp/.ICE-unix/32715
Connecting to system bus failed: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
Initializing gnome-mount extension
** (nautilus:303): WARNING **: Cannot connect to system bus: org.freedesktop.DBus.Error.FileNotFound : Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
** (nautilus:303): WARNING **: Could not initialize hal context
(nautilus:303): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
(nautilus:303): GLib-GObject-CRITICAL **: g_object_weak_ref: assertion `G_IS_OBJECT (object)' failed
Shutting down gnome-mount extension
Initializing nautilus-open-terminal extension
The application 'gnome-session' lost its connection to the display :20.0;
most likely the X server was shut down or you killed/destroyed
the application.
Usage:program_name [address][:port]Usage:program_name [address][:port]The application 'nautilus' lost its connection to the display :20.0;
most likely the X server was shut down or you killed/destroyed
the application.
Aviso do gestor de janelas: Ligação ao ecrã ':20.0' perdida;
provavelmente o servidor X foi desligado ou o gestor de janelas
foi morto/destruído por si.
Last edited by sickhate (2007-04-03 15:39:56)weel it seemed as stupid as it looks that murrine configurator using non gtk2 freezes the gnome....on gnome 2.16 it didnt happend....
Maybe you are looking for
-
How do I find out or know if everything is backed up before I upgrade to ios 6?
before I update to ios6 how can I make triple sure that all my music, photos, contacts, notes, and messages are all backed up? in settings I have my iPhone 4 programmed to back up to the iCloud - but how do I know for sure that everything is there? I
-
Wont install audio drivers?!? Please help
My motherboard is the k7n2 delta series. I have 5.1 surrond sound speakers and I had just bought the S-bracket for this motherboard. I CANT get INTO the "NVIDIA nFORCE(TM) Control Panel" to configurate the speakers. When I install the drivers a warni
-
Inbox has taken over Firefox start page. I can't get rid of it. Any ideas?
Have attempted to remove program via the control pane. It appeared to succeed but was just removed from the list of programs. It still replaces Firefox when opening.
-
Linux 3.10 ext4_da_writepages err -30 after remount ro
I have a device formatted with ext4 (no_auto_da_alloc,data=ordered). During shutdown, when I try to force remount as read-only, the mounted filesystem. sync;echo "u" > /proc/sysrq-trigger I see these ext4 errors after remount 76.209728 Emergency Remo
-
Hi, My client wants to change the account field length in the doc entry. Standard account field is length is 16 or 17 digits. Its length has to be reduced to 10 digits. How can i do this ? Can I do this in the configuration (or) customisation ? If i