Gnome extensions are not setting keys in dconf-editor

Some extensions have settings that can be edited via dconf-editor, or so they claim.
But if I open up dconf-editor and go to org.gnome.extensions the only entry is alternate-tab which is an extension that I don't even have installed anymore!
It doesn't matter if I install the extension via AUR or from extensions.gnome.org, none of them show up in dconf, but they all seem to work just fine- just with their default settings...

Can you be more specific on what extensions are mis-behaving? For example, to configure the auto-move-windows extension you need to manually edit its extension.js file if you are using Gnome 3.2.x, while gsettings may be used if you use gnome 3.3.9x.
It wasn't always like this, however things changed during the 3.3 cycle, when gsettings started allowing extensions to use their own schemas

Similar Messages

Safari 8 extensions are not saved

Hi,
on Yosemite with Safari 8 installed, extensions are not saved.
When installing extensions they work. However, when I restart safari the are gone. They are still in ~/Library/Safari/Extensions but not activated and not shown in the extensions tab in the settings.
Any ideas who to solve this issue?
Thanks

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing' '464843899 1233118628' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Comboboxes are not set on the 1st time a row is clicked in the dataTable

I have somewhat the following setup:
I have a DataTable that is filled with a listof objects, a actionListener is handeled when a row is clicked.
Under the Table there are two ComboBoxes (lets call them Category and Item) that get their values from lists of Objects. The values of the list that backs the Item combo depend on the selected value of the Category combo.
Lets assume the values look like this:
CategoryA
---ItemA1
---ItemA2
CategoryB
---ItemB1
---ItemB2
Together with some textboxes, they should represent the values of the clicked row in the Table.
Now the problem:
When the comboboxes have a different value than the row that is beïng selected the values of the comboboxes and textboxes are not set correctly until the 3rd time the row is clicked.
It also doesn't go into the onClickMehod in the backing bean before the 3rd click. This is checked by a logger.
an example:
before clicking, the category combo is set to "CategoryB", the Item combo is set to "ItemB1" and the textboxes are empty. The row that is going to be clicked has as its category "CategoryA" and as its Item "ItemA1"
1st click:
the form still shows the values like they were before clicking, the log doesn't show that the method is triggered
2nd click:
the Item combo is set to "ItemA1", the category is still set to "CategoryB", the textBoxes are still empty. The log still doesn't show that the method is triggered
3rd click:
the Category combo is set to "CategoryA", the Item combo is set to "ItemA1", the textboxes also have their correct values.
the code is as followed:
JSP:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %>
<%@ taglib prefix="h" uri="http://java.sun.com/jsf/html" %>
<%@ taglib prefix="f" uri="http://java.sun.com/jsf/core" %>
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head></head>
<body>
<f:view>
<h:form binding="#{backingBean.pageLoad}">
<h:dataTable binding="#{backingBean.dataTable}" columnClasses="COL1, COL1, COL2, COL2, COL3" value="#{backingBean.myObjects}" var="myObject" width="100%" headerClass="HEADING" rowClasses="ROW1, ROW2" rows="10">
<h:column>
<f:facet name="header">
<h:commandLink actionListener="#{backingBean.sortDataList}" styleClass="rowHeader">
<f:attribute name="sortField" value="getItemCategory" />
<h:outputText value="Category"/>
</h:commandLink>
</f:facet>
<h:commandLink shape="rect" styleClass="rowtext" value="#{myObject.item.itemCategory.description}" actionListener="#{backingBean.rowSelect}" />
</h:column>
<h:column>
<f:facet name="header">
<h:commandLink actionListener="#{backingBean.sortDataList}" styleClass="rowHeader">
<f:attribute name="sortField" value="getItem" />
<h:outputText value="Item"/>
</h:commandLink>
</f:facet>
<h:commandLink shape="rect" styleClass="rowtext" value="#{myObject.item.name}" actionListener="#{backingBean.rowSelect}" />
</h:column>
<h:column>
<f:facet name="header">
<h:commandLink actionListener="#{backingBean.sortDataList}" styleClass="rowHeader">
<f:attribute name="sortField" value="getDescription" />
<h:outputText value="Certification"/>
</h:commandLink>
</f:facet>
<h:commandLink shape="rect" styleClass="rowtext" value="#{myObject.description}" actionListener="#{myObject.description}"/>
</h:column>
<f:facet name="footer">
<h:panelGroup style="text-align:right">
<h:commandButton value="first" action="#{backingBean.pageFirst}" disabled="#{backingBean.dataTable.first == 0}" />
<h:commandButton value="prev" action="#{backingBean.pagePrevious}" disabled="#{backingBean.dataTable.first == 0}" />
<h:commandButton value="next" action="#{backingBean.pageNext}" disabled="#{backingBean.dataTable.first + backingBean.dataTable.rows >= backingBean.dataTable.rowCount}" />
<h:commandButton value="last" action="#{backingBean.pageLast}" disabled="#{backingBean.dataTable.first + backingBean.dataTable.rows >= backingBean.dataTable.rowCount}" />
<h:commandButton value="Append New" action="#{backingBean.ClearFields}" />
</h:panelGroup>
</f:facet>
</h:dataTable>
<h:inputHidden value="#{backingBean.sortField}"/>
<h:inputHidden value="#{backingBean.sortAscending}"/>
<h:inputHidden value="#{backingBean.myObjectId}"/>
<br />
<br />
<table style="border-collapse: collapse; width:100%" cellpadding="3" border="1">
<tr>
<td style="text-align:left; width:20%; background-image:url('images/lbar.gif'); font-family:Arial; font-size:smaller; font-weight:bold" colspan="3">Detail</td>
</tr>
<tr>
<td style="text-align:right; width:20%; background-color:#CCCCCC; font-family:Arial; font-size:smaller; font-weight:bold">Category </td>
<td style="width:80%; background-color:#CCCCCC;font-weight:bold">
<h:selectOneMenu value="#{backingBean.selectedCategory}" onchange="submit();" valueChangeListener="#{backingBean.CategoryChange}">
<f:selectItems value="#{backingBean.selectedCategories}"/>
</h:selectOneMenu>
</td>
</tr>
<tr>
<td style="text-align:right; width:20%; background-color:#CCCCCC; font-family:Arial; font-size:smaller; font-weight:bold">Item id </td>
<td style="width:80%; background-color:#CCCCCC;font-weight:bold">
<h:selectOneMenu value="#{backingBean.selectedItem}">
<f:selectItems value="#{backingBean.selectedItems}"/>
</h:selectOneMenu>
</td>
</tr>
<tr>
<td style="text-align:right; width:20%; background-color:#CCCCCC; font-family:Arial; font-size:smaller; font-weight:bold">Item Description </td>
<td style="width:80%; background-color:#CCCCCC;font-weight:bold"> <h:inputTextarea value="#{backingBean.description}" cols="60" rows="5"/></td>
</tr>
</table>
</h:form>
</f:view>
</body>
</html>the backing bean:
public class BackingBean{
-- Declaration of properties --
public void rowSelect(ActionEvent event) {
// Get selected MyData item to be edited.
logger.debug("Select row");
FacesContext context = FacesContext.getCurrentInstance();
try
if ((sortField != null) && (myObjects != null)) {
Collections.sort(myObjects, new DTOComparator(sortField, sortAscending));
dataTable.saveState(context);
catch(Exception e){
logger.error(e.getLocalizedMessage(), e);
context.addMessage("ERROR", new FacesMessage(e.toString()));}
logger.debug("Setting fields");
myObject = (MyObject) dataTable.getRowData();
description = myObject.getDescription();
itemCategory = myObject.getItem().getItemCategory();
item = myObject.getItem();
docDisabled = !certified;
selectedCategory = itemCategory.getId();
myObjectId = myObject.getId();
logger.debug("Fields set");
public void sortDataList(ActionEvent event) {
String sortFieldAttribute = getAttribute(event, "sortField");
// Get and set sort field and sort order.
if (sortField != null && sortField.equals(sortFieldAttribute)) {
sortAscending = !sortAscending;
} else {
sortField = sortFieldAttribute;
sortAscending = true;
// Sort results.
if (sortField != null) {
Collections.sort(myObjects, new DTOComparator(sortField, sortAscending));
public void CategoryChange(ValueChangeEvent vce){
try {
logger.debug("SelectedIndexChange: Category: {}",vce.getNewValue().toString());
selectedCategory = Integer.parseInt(vce.getNewValue().toString());
logger.debug("SelectedIndexChange: Category");
itemCategory = itemCategoryService.retrieveItemCategoryById(selectedCategory);
logger.debug("Showing Category: {}", itemCategory.getDescription());
} catch (Exception e) {
logger.error("Error occured: {}",e.toString());
FacesContext context = FacesContext.getCurrentInstance();
context.addMessage("ERROR", new FacesMessage(e.toString()));
public List<SelectItem> getSelectedItems() {
selectedItems = new ArrayList<SelectItem>();
try
logger.debug("selectedCategory: {}",selectedCategory);
if (itemCategory!=null)
logger.debug("Category Object: {}",itemCategory.getId());
items.clear();
items.addAll(itemCategoryService.retrieveItemCategoryById(selectedCategory).getItems());
logger.debug("items recieved: {}",items.size());
for (int count = 0; count < items.size(); count++) {
selectedItems.add(new SelectItem(items.get(count).getSeq(),items.get(count).getName()));
catch (Exception e){
logger.error("Error occured: {}",e.toString());
FacesContext context = FacesContext.getCurrentInstance();
context.addMessage("ERROR", new FacesMessage(e.toString()));
return selectedItems;
public List<SelectItem> getSelectedCategories() {
selectedCategories = new ArrayList<SelectItem>();
try{
for (int count = 0; count < itemCategories.size(); count++) {
if (itemCategories.get(count).getItems().size() != 0)
selectedCategories.add(new SelectItem(itemCategories.get(count).getId(),itemCategories.get(count).getDescription()));
if (selectedCategory == 0)
selectedCategory = itemCategories.get(0).getId();
catch (Exception e){
logger.error("Error occured: {}",e.toString());
FacesContext context = FacesContext.getCurrentInstance();
context.addMessage("ERROR", new FacesMessage(e.toString()));
return selectedCategories;
-- other getters and setters --
}I've already tried to use the action attribute instead of the actionlistener attribute, also tried to add immediate="true" to all fields and columns.
Did try to add onclick="submit();" to the rows.
What can be done to fix it??
ps: the enviroment is JSF + Spring + Hibernate

The <h:messages/> tag is where the validation exception is shown, but no validation is used on the form, no other exeptions are sown.
the List<Categories> is filled at a setPageLoad method which is bound to the form by <h:form binding="#{backingBean.pageLoad}">.
The List<SelectedItem> of the categories box is filled in its getter and filled with the values of the List<Categories>
And both the List<SelectedItem> of the items box and the List<Item> are filled in the getter of the List<SelectedItem> of the items box
so instead of that i should rewrite it to something like this:
public BackingBean() {
    selectedCategories = new List<SelectedItem>();
    selectedItems = new List<SelectedItem>();
    categories = CategoryService.retrieveCategories(); //gets all categories
    items = ItemService.retrieveItemsByCategory(selectedCategory); //gets the items
    for (int count = 0; count < categories.size(); count++) {
        selectedCategories.add(new SelectItem(categories.get(count).getId(),categories.get(count).getDescription()));
    if (selectedCategory == 0){
        selectedCategory = categories.get(0).getId();
    for (int count = 0; count < items.size(); count++) {
        selectedItems.add(new SelectItem(items.get(count).getId(),items.get(count).getDescription()));
    if (selectedItem == 0){
        selectedItem = items.get(0).getId();
public void CategoryChange(ValueChangeEvent vce){
        try {
            if (vce.getPhaseId() != PhaseId.INVOKE_APPLICATION) {
                vce.setPhaseId(PhaseId.INVOKE_APPLICATION);
                vce.queue();
            } else {
                FacesContext.getCurrentInstance().renderResponse();
                selectedCategory = Integer.parseInt(vce.getNewValue().toString());
                category = CategoryService.retrieveCategoryById(selectedCategory); // gets the category Object
        } catch (Exception e) {
            logger.error("Error occured: {}",e.toString());
            FacesContext context = FacesContext.getCurrentInstance();
            context.addMessage("ERROR", new FacesMessage(e.toString()));
public List<SelectItem> getSelectedCategories() {
    return selectedCategories;
public void setSelectedCategories(List<SelectItem> selectedCategories) {
    this.selectedCategories = selectedCategories;
public List<SelectItem> getSelectedItems() {
    return selectedCategories;
public void setSelectedItems(List<SelectItem> selectedItems) {
    this.selectedItems = selectedItems;
}The bean is request scoped.

This message could not be delivered because your SMTP settings are not set. Please use the Accounts Preferences panel to set the SMTP options for your account.

I am not able to send out an email. I keep getting the following message: This message could not be delivered because your SMTP settings are not set. Please use the Accounts Preferences panel to set the SMTP options for your account. Can someone help me with this?

We need some information, starting with the email provider (eg. Google, Yahoo, Bellsouth, etc)

Why some of the tables are not set cacheable by default.

Hi all.
in the case management analytics in OBIEE. (Case Management Analytics Fusion Edition)
Some of the tables for example (W_CASE_D, W_INCIDENT_D, W_LEAD_D) are not set Cacheable.
That means, select table, right click, properties, Cacheable is NOT ticked in.
does any one knows the reason why ?
Thanks,
Shanker.

Hi Srini.
Sorry, I think you did not understand my question.
basically some tables are set as 'Not Cacheable' in Case Management Analytics, I am not sure, why ?
do you know may be why ? all tables are marked as 'Cacheable' when looked from Table > Properties.
But few ((W_CASE_D, W_INCIDENT_D, W_LEAD_D) NOT, WHY ? is it on purpose Oracle has done this way ?

Forgot password for users for whom challenge questions are not set

Hi,
I have a scenario here where initially the environment property for force setting challenge questions during first login was not set to true.
But it has been set to true later. But for users created prior setting this property to true, the forgot password link is taking to a page to answer challenge questions which obviously is not working.
Is there anyway to handle this scenario without doing ADF customization? For example say, to force all previous users also to set challenge questions for whom the challenge questions are not set.

Hi, In your scenario, since user has forgotten his/her password and he has not set his answers to questions, so the only option left is calling Help Desk. Help desk guys should educate end users that go to OIM->My Information -> Set Security Questions. This is the only easy way I can think of.
HTH,
~Abhishek

Indicators "goods receipt" "invoice expected" are not set! Bug or feature?

Hi all,
we are using SRM 5.0 classic scenario.
A freetext shopping cart without vendor assignment creates a PR in the backend (4.6C). In this PR the indicators for "goods receipt" and invoice expected" are not set. Is this ab bug or a feature.
In former realeases these indicators are set automatically for the document flow.
What do I have to do to set the indicators automatically in SRM 5.0.
Best regards
Susanne

Hello,
in classic scenario those flags are set according to the account assignment type and the settings in backend transaction OME9. On the one hand these settings can be overruled by BADI(s), on the other hand this behavior has also been noticed due to a malfunction which was corrected with note 1175255
(pls also take into account the corrections for the backend!).
I hope this is a first approach for solving the issue.
BR
Michael Haslinger

ADF Faces components are not rendered in Jdeveloper visual editor

Hi!
I'm using Jdeveloper 1013 Developer Preview. I found that the components of ADF Faces EA16 are not shown on the visual editor in Jdeveloper, but the ADF Faces EA15 components are shown. I'm just wondering if this is normal, and there is anything that can be done to fix this?
Meen

I know there's a recent release with a visual editor problem, but I'm not sure which one it is. This thread says you need a fresh install? Can you try that?
Re: ADF Faces tutorial/code sample for data table?

OamAuthn cookies are not set with encrypted value in https login with FFbro

we have developed a custom login page which is deployed on oam server itself .
In custom login page we are passing 3 userinfo like username ,passowrd and request id as part of authentication parameter .
We have developed our own javascript to pass all these information using ajax call .
Below are the snippet of ajax method which is posting the data to oam server .
var uname = $("#username").val();
var pwd = $("#password").val();
pwd = pwd.replace( /&/g, '%26' );
var requestId = $("#request_id").val();
var oamAuthenticationUrl=$("#oamAuthUrl").val()+'/oam/server/auth_cred_submit';
var postdata = "username=" + uname + "&password=" + pwd + "&request_id=" + requestId;
$.ajax( {
type :'POST', url : oamAuthenticationUrl, data :postdata,
complete : function (xmlHttp, statusCode) {
// some code if user login is done successfully ......
Here we are making login page call using ssl port Like our login page is https://oamserver:14101/.....
This code is working perfectly fine in internet explorer but in firefox oracle access manager is not setting any value to oamAuthnCookeis.
I mean before logging and after logging value of oamAuthnCookies remains same like
LoggedoutContinue .
Thanks,
Arun

This is a known issue of CEP (Common Extensibility Platform, a DLL that supports displaying extensions). Code like “document.cookie” in HTML extension is invalid because CEF (CEP integrated CEF3 to display HTML Extensions) intentionally disables cookies on "file://..." for a variety of reasons.
However, CEP stores cookies at:
Windows: "C:\Users\yourusername\AppData\Local\Temp\cep_cookies"
Mac: "/Users/yourusername/Library/Logs/CSXS/cep_cookies"
Please let me know if more information is needed, thanks

Extensions are not signed correctly! what does that mean.

sorry i dont know what to do on these forums, i cant open extensions as it says they are not correctly sighned does anyone know what that means and how do i go about correcting it.....please dont go of on one if im in the wrong area or ive set this out wrong. i cannot contact adobe...

At this site:
The extension could not be loaded because it was not properly signed (Adobe Photoshop CC 2014) – onOne Software
I found this:
The extension could not be loaded because it was not properly signed (Adobe Photoshop CC 2014)
To resolve this issue please perform the following.
1. Close Adobe Photoshop
2. Download and install the Adobe Extension Manager. This is available through the Adobe CC App and also here: https://www.adobe.com/exchange/em_download/
3. Go to the following location:
C:\Program Files (x86)\Common Files\Adobe\CEP\Extensions\onOne
and delete the onOne folder.
4. Open the Adobe Extension Manager app.
5. Go to: File > Install Extension. Navigate to:
C:\Program Files\onOne Software\Perfect Photo Suite 9\Plug-in Files\Panels\onOne.zxp
add the onOne.zxp by highlighting it and clicking open.
6. Launch Adobe Photoshop CC 2014
This seems to relate to the onOne app. You may want to modify the instructions to coincide against your own extension apps
Good luck.

Can Windows Server Backup spread a single backup job across multiple disks if they are not set up as a virtual disk?

This may be a dumb question, but I can't seem to find any definitive information after having done many, many searches. Short question is - can Windows Server Backup spread a single backup job across multiple disks if they are not in a storage
pool or some other RAID/JBOD structure?
Background:
I'm running Server 2012 Essentials with all Windows Updates installed. I have been backing up approx 2.8TB of data (Bare Metal Recovery, C:, S: (shared folders), and system reserved) for the past year+ onto a storage pool made up of two-2TB external
USB drives. Backup is slow (takes approx 1.5 days to complete), but generally works. Not surprisingly I was constantly getting capacity low messages so I decided to increase my backup storage pool by adding a 3TB drive and another spare 750GB drive
for a total of 7.75TB. Instead of having four separate external USB enclosures, I bot a 4-bay enclosure - Startech.com model #S3540BU33E to simplify this (or so I thought!).
The first problem I had was adding the two new drives to the existing storage pool. I think that is because the Startech uses a JMicron USB controller that reports identical uniqueid's for all drives so only one shows up in the GUI interface for creating storage
pools. After doing research on this, I set up a new storage pool and virtual disk using all four drives via Powershell and thought I was good. However, when the backup ran, it failed after filling the first drive, saying there was no remaining capacity. In
reality there were three remaining empty drives and there storage pool reported almost 5TB of avail capacity. I assumed this was due to the identical uniqueid issue so I decided to try a different tactic.
Instead of using a storage pool that combines all four disks into one virtual disk, I just added each of them to Windows Server Backup as individual drives thinking it would manage them collectively. I.e., when a drive filled up during a particular backup,
it would just start using the next drive and so on. Apparently this was a foolish assumption because the backup failed again as soon as the first disk filled up.
So now I don't know if this is still an issue with the identical uniqueid's or if Server Backup actually can't spread a single backup across multiple individual drives that aren't in a pool or other virtual disk implementation. Hence, my original question.
My guess is that it does *not* spread them across individual disks, but I just wanted to get confirmation.
Thanks

Mandy,
Thank you for following up on my question.
Unfortunately the article you referenced doesn't address what I am trying to accomplish.
The article focuses on saving the same backup job to multiple disks and rotating the disks between on and offsite for enhanced protection. However, it still requires that an individual backup job fits on a single disk.
What I am trying to determine is if a single backup job can span across more than one physical disk (during the backup process) without those physical disks being in some type of virtual disk implementation (e.g., storage pool, RAID, etc.).
Thanks,
Gerry

My extensions are not showing up

I have installed quite a few extensions, but some of them are not showing up.
The extensions showing up are as follows:
Pearl
amplify
Not showing up:
Google application mail watcher
Shareaholic
similar web

Dear Sherri
Please could you let us know which version of Photoshop you are using and whether the extensions menu is now greyed out? If you used Adobe add-ons to download your products, it will be easy to reinstall them directly from the 'My Add-ons' link on the left-hand side of the add-ons website: creative.adobe.com/addons.
If, however, you are a CS6 user and use Adobe Exchange to obtain products for Photoshop, the 'My Stuff' section of the panel, as well as Extension Manager, will give you an indication of what should and shouldn't be currently installed in your copy of Photoshop.
Kind regards
Krystal
-Adobe Exchange / Addons team

Developement Mode extensions are not loaded by Photoshop CC after 14.2 update

I keep my HTML5 extensions in /Users/myaccount/Library/Application Support/Adobe/CEPServiceManager4/extensions.
I do have Debug Mode enabled using cli tool: https://github.com/davidderaedt/CCEXTCLI/blob/master/setdebugmode.sh
In manifest.xml I have "<Host Name="PHXS" Version="[14.1,14.9]" /><Host Name="PHSP" Version="[14.1,14.9]" />"
I do have all required settings in Preferences->Plug-ins enabled (allow extensions/panels/internet connection)
Before 14.2:
Everything was fine, all extensions were loaded without any problems.
14.2:
No extensions are loaded, no errors are reported, it just seems that Photoshop CC does not load any extensions
When I install same extension using .zxp package then Extension Manager installs extension correctly and it is working so its not extension code issue I guess.
My system information:
Adobe Photoshop Version: 14.2 (14.2 20131211.r.515 2013/12/11:23:00:00) x64
Operating System: Mac OS 10.9.1
Is it possible to temporary rollback to 14.1.2?

The problem was that I had nested directory structure of extension like: ".../extensions/extension-folder/something/else/CSXS/manifest.xml" -> I changed directory structure to have ".../extensions/extension-folder/CSXS/manifest.xml" and it solved the issue. Nevertheless Photoshop 14.1.2 was accepting deeply nested directory structure of extension and 14.2 does not. I found also another issue but I will post it in another discussion.
Thanks.

View Object attributes are not setting

Hi,
I have created a table region and attached a row header view attribute to it.I have a created a transient attribute also.
I am setting transient vo attribute in process request of the controller but the values are not reflecting in the table.
I am giving the complete code,please help me.
OATableBean tableBean=(OATableBean)webBean.findChildRecursive("TableRN");
pageContext.writeDiagnostics(this, " xxchrchecktableBean "+tableBean, 1);
OAViewObject oaviewobject = (OAViewObject)am.findViewObject("XXCHRCwkVendorReviewVO1");
if(oaviewobject !=null)
oaviewobject.executeQuery();
String vendorDetailsArray[]=new String[5];
vendorDetailsArray[0]=pageContext.getSessionValue("XXCHRCWKRevSrcAgency").toString();
vendorDetailsArray[1]=pageContext.getSessionValue("XXCHRCWKRevVenRepName").toString();
vendorDetailsArray[2]=pageContext.getSessionValue("XXCHRCWKRevVenRepPhNo").toString();
vendorDetailsArray[3]=pageContext.getSessionValue("XXCHRCWKRevVenRepEmail").toString();
vendorDetailsArray[4]=pageContext.getSessionValue("XXCHRCWKRevVenRepAddress").toString();
int fetchedRowCount=oaviewobject.getFetchedRowCount();
pageContext.writeDiagnostics(this, "fetchedRowCount="+fetchedRowCount, 1);
OARow oarow = null;
if(fetchedRowCount >0)
for (int i=0;i<fetchedRowCount;i++)
oarow=(OARow)oaviewobject.getRowAtRangeIndex(i);
if(oarow !=null)
oarow.setAttribute("ColumnValue",vendorDetailsArray);
Edited by: user13060916 on Aug 24, 2010 10:58 PM

hi
try your code in this way ,
OATableBean tableBean=(OATableBean)webBean.findChildRecursive("TableRN");
pageContext.writeDiagnostics(this, " xxchrchecktableBean "+tableBean, 1);
OAViewObject oaviewobject = (OAViewObject)am.findViewObject("XXCHRCwkVendorReviewVO1");
if(oaviewobject !=null)
*//oaviewobject.executeQuery(); // dont execute VO*
String vendorDetailsArray[]=new String[5];
vendorDetailsArray[0]=pageContext.getSessionValue("XXCHRCWKRevSrcAgency").toString();
vendorDetailsArray[1]=pageContext.getSessionValue("XXCHRCWKRevVenRepName").toString();
vendorDetailsArray[2]=pageContext.getSessionValue("XXCHRCWKRevVenRepPhNo").toString();
vendorDetailsArray[3]=pageContext.getSessionValue("XXCHRCWKRevVenRepEmail").toString();
vendorDetailsArray[4]=pageContext.getSessionValue("XXCHRCWKRevVenRepAddress").toString();
int fetchedRowCount=oaviewobject.getFetchedRowCount();
RowSetIterator rowItr = vo.createRowSetIterator("rowItr");
pageContext.writeDiagnostics(this, "fetchedRowCount="+fetchedRowCount, 1);
OARow oarow = null;
if(fetchedRowCount >0)
for (int i=0;i<fetchedRowCount;i++)
oarow=(OARow)rowItr.getRowAtRangeIndex(i);
if(oarow !=null)
oarow.setAttribute("ColumnValue",vendorDetailsArray);
let me know case of any issues
thanx
Pratap

Business Area not set in IT0001 during Batch input

Hi!
I'm trying to load the IT0001 trough a batch input, but the fields for cost center, business area function and organizational assignment are not derived from the position.
The batch input is running the entry action.
But if I run the action normally, the fields are field in correctly.
Can anyone help me? Thanks a lot.

Solved...
The problem was the information passing to the dynpro. In the ABAP coding we were setting those fields to ' '.
Thanks a lot

Gnome extensions are not setting keys in dconf-editor

Similar Messages

Maybe you are looking for