Gnome install problem ? is mirror out of sync ? [Solved]

HI i did pacman -S gnome and extra but when i wanna start a gnome-sesion i just get errors ? and my Xfce4 works fine ?
i dont why gnome dont wanna start
is mirror out of sync ?

What is your locale set to and what do you use to start gnome?
the gnome-session binary should get started from .xinitrc, while kde and xfce4 have a startscript that launch X for you instead. GNOME will come with such a script in a while, because the dbus-launch things that are required for many GNOME apps nowadays causes many problems for people who don't add it to their .xinitrc.
About the locale: make sure you pick one from /etc/locale.gen and have it enabled there. Take note of the UTF8/UTF-8 differences. Some locales work with both write methods, most locales fail with these warnings if you don't pick the locale from /etc/locale.gen.

Similar Messages

  • Most mirrors out of sync.... no info or explanation

    So currently 55 out of 86 Arch mirrors are out of sync, making upgrading or installing Arch a real pain.
    This is a very serious problem, yet there is no information or explanation as to what's happening. How about posting some news on the website front page? With the recent release of the 2009.08 image, the mirrors are going to be in demand, and some of the demand will be new users who need to be informed!
    Cheers, Renners

    renners1 wrote:
    So currently 55 out of 86 Arch mirrors are out of sync, making upgrading or installing Arch a real pain.
    This is a very serious problem, yet there is no information or explanation as to what's happening. How about posting some news on the website front page? With the recent release of the 2009.08 image, the mirrors are going to be in demand, and some of the demand will be new users who need to be informed!
    Cheers, Renners
    there is, just have to search in the right place or do a search on forum. this subject was raised multiple times .
    http://archlinux.me/brain0/2009/08/16/s … l-scripts/
    Last edited by wonder (2009-08-19 07:38:08)

  • [Solved] gnome install problem

    Fresh install of Arch and I'm trying to get gnome installed, I've done it before without a problem but today when I try to install gnome "pacman -S gnome" it says "error: target not found: gnome" I have the [extra] repo enabled so I'm not sure what the problem is.
    Last edited by nixbin (2012-04-24 22:02:42)

    Do:
    pacman repository syncronization
    sudo pacman -Syu
    Then:
    Gnome Wiki
    sudo pacman -S gnome
    Last edited by headkase (2012-04-24 21:47:26)

  • [SOLVED]Mirrors All Out of Sync

    Today I went to reinstall a package(thunar) after trying out PCManFM and realized I don't like it and I got these errors:
    :: Retrieving packages from extra...
    error: failed retrieving file 'thunar-1.6.0-3-x86_64.pkg.tar.xz' from hive.ist.unomaha.edu : The requested URL returned error: 404 Not Found
    error: failed retrieving file 'thunar-1.6.0-3-x86_64.pkg.tar.xz' from hive.ist.unomaha.edu : The requested URL returned error: 404 Not Found
    warning: failed to retrieve some files from extra
    error: failed to commit transaction (download library error)
    Errors occurred, no packages were upgraded
    So I tried uncommenting a different mirror and got the same thing. Then I uncommented every mirror in my country and got this error:
    :: Retrieving packages from extra...
    error: failed retrieving file 'thunar-1.6.0-3-x86_64.pkg.tar.xz' from mirror.us.leaseweb.net : The requested URL returned error: 404 Not Found
    thunar-1.6.0-3-x86_64 208.0 B 6.20M/s 00:00 [######################] 100%
    thunar-1.6.0-3-x86_64 4.2 KiB 9.32K/s 00:00 [######################] 100%
    (1/1) checking package integrity [######################] 100%
    error: failed to commit transaction (wrong or NULL argument passed)
    Errors occurred, no packages were upgraded.
    I doubled checked /etc/pacman.conf to be sure that all my repositories are uncommented. Indeed they are. What's going on here?
    Last edited by xworld (2012-12-10 04:10:33)

    It's not the mirrors out of sync, it's your local database. The current version of thunar is 1.6.1-1. Do a pacman -Syu first.
    Last edited by Scimmia (2012-12-10 02:33:50)

  • Audio And Video out of sync in Final Cut, but not in quicktime

    I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
    I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
    By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
    This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
    This is what I did to attempt to fix the problem:
    - Check drives using disc utility and repair permissions
    - Remove Final Cut Preferences using Apple guidelines
    - Switch hard drives
    - Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
    - reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
    - switch ram slots, and even replace ram with different sticks from another G4 machine
    None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
    Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
    Thanks

    For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
    Editing in FCP 6.0.2
    QT was just updated to 7.3.1 the other day (hmm)
    On an MacBookPro machine, OS 10.5.1
    Software updater says everything's up to date of course.
    DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
    In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
    I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
    Grr,
    Nicole
    Editor, RHED Pixel

  • Audio & Waveform out of sync

    I have some video recorded at 720/50p and 48Khz sound.
    I have some sound recorded on an external recorder (Zoom H4N) also at 48Khz.
    When I import them in to FCP (create new sequence, drop the footage on and let FCP make the sequence match the video) and sync the audio, the audio from the external recorder drifts over time (about half a second over 10 mins) yet the waveform display looks perfectly in sync.
    The audio is not being played in sync but the waveform IS in sync.
    In case this was a playback issue I exported the timeline to a quicktime file and it has the same problem (i.e out of sync).
    If I slow the audio track to 99.9% it more or less stays in sync.
    I've also run the file through compressor to convert to an AIFF 48Khz 16 bit file and it's the SAME THING!
    Any one know what is causing this? If the audio AND the waveform drifted I could stretch them to match, but the audio does not play according to the waveform. Help!
    This happens on two different computers - an 8 core and a quad i7 iMac. Both running 7.0.2 and both on Snow Leopard 10.6.4.
    The crazy thing is this used to work perfectly until I upgraded to snow. Ideas????

    I had this same exact problem on a piece i was working on and it turned out that it had to do with the file being read as drop frame even though it was non-drop (or vice versa, can't remember). we were working with tracks being mixed out of logic, and our mixer changing one obscure setting for the output that shouldn't have affected anything made the difference. we theorized it was some strange file header information that final cut was translating incorrectly.
    Also, the result wasn't consistent across systems. one of the computers we were using would always import the clip even if the composer had changed it and the other wouldn't.
    In the end i think we actually had to do a speed change on one of the clips to 99.9 (or 100.1, i can't remember. ha) and it worked fine. but yeah. it's just the usual crappy FCP file management. they need to fix that bad. good to know about STP fixing it. probably rewrites the file header. or something.

  • Solution to Audio-Video out-of-sync

    For a good 3 full weeks by using videora to convert files, i've realised that it has been giving me such non-synching rate between the audio and its video (try scrolling to the later part of the movie, viewing from the ipod)
    Trying to solve the problems, from my research of frame rates in wikipedia to reconverting thouroughly again but to no avail until i realised this simple method reason why.
    I have been using Videora with using its "input" frame rate - do not use that - it is not reliable - i am presuming that it uses a same number of frame rates for all data conversion which is why the difference in audio-video differences. Solution is simple.
    1. Just right click on any .avi files
    2. Check their frame rate.
    3. Input the exact number for your videora presets. (do save a number of presets eg. 23 fps (frames per second),
    25 fps and 29 fps - you'll find them useful when you see their respective frame rates to match your respective profiles.
    Since then, i have no problems with the out-of-sync syndrome from videora, enjoy.
    Other problems like videora doesn't convert .mov files,
    you'll just have to download the latest itunes and use its "convert selection" option in there.

    I have made slight progress in my problem, but still have not fixed it. I have imported my footage through IMovie and everything is IN sync, if i move that same footage to final cut pro, everything is still in sync. However, capturing on final cut pro yields different results because everything captured on FCP is out of sync. So i know that my problem is a setting with the capture process having to do with final cut pro, Please help because i have so much work to do!

  • Audio out of sync after encoding

    I'm hoping someone can offer a suggestion.  I've encoded my sequence 4 times now and every time the audio is out of sync with the video.  The sequence is about 2 hours long.  It was shot on a HD flip cam, , 1280 x 720 (1.0) 30.00 fps, 44100 Hz.  The sequence is HD 1280 x 720 (1.0), 29.97 fps, 48000 Hz-Stereo.  They are the exact settings I've been using to make these videos for the past 5 months since upgrading to CS5, and this is the first time I'm having this issue.  I usually make 30 minutes videos, this is my longest yet.  
    I've definitely had this happen before with cs4, but was hoping the upgrade to a better version as well as better computer would do away with these encoding issues. I dont' know what other info you may need, but I'm happy to provide more.
    I'm exporting to window's media, NTSC Source Hight Quality, output 720x480, 48kHz, stereo.  Everytime I export it, the video markers only cover half the sequence.  I have to move them to cover the entire sequence.  Not sure if that has anything to do with it.
    I'm at a loss.  Any suggestions would be so appreciated.
    Jules

    Thank you so much.  I did have problems with Encore, but I hopefully got that resolved.  This specific problem is audio out of sync in my media encoder.  I can't test the project beforehand.  It took 2 1/2 hours to encode and when I played the finished project, it was out of sync.

  • [Closed]Downgradeing package isn't availible in out-off sync mirror

    OK I admit this is a bit of a stupid question, but still...
    I've done
    pacman -Scc
    not knowing that I might need it again. But I do.
    I have reason to believe that Qt4.5 is a root of all recent problems I had. (BTW I use KDEmod4.2.1)
    To shortly list my problems:
    -No KHotKeys and no possibility to add a hotkey in system settings-> input actions.
    -having problems with locale, can't sett it on si_SL thus sometimes having a "weird fonts", especially with special characters as č š ž. But not always I can type this normally, but
    sometimes my y and z get switched and in HTML my č š ž aren't displayed properly, and I know for the fact that it should work as last time I edited that html file I was able to write č, š ž and get it
    appear properly. Sorry it's because Kate is set to westrn instead of UTF-8 by default so it has nothing to do with Qt.
    -No system notification if I press capslock even if I sett it to notify me. Not sure if it's a Qt related problem.
    (It's either that I somehow install a Qt4.4 or to try a SVN or the newest KDE which is coded with Qt4.5 in mind;
    I just don't know how stable is the testing / unstable or even SVN KDE. I do need Arch for my day-to-day work)
    I did consult the Arch Wiki and tried almost every out off sync mirror and the Package search but I couldn't found Qt4.4 version.
    Any help is welcome.
    thanks in advance.
    Last edited by Primoz (2009-03-16 09:31:03)

    Damn! That didn't solved any of my problems.
    I'm beginning to think that my problems with Arch are more deep and go back to installation.
    I tried just about everything and I still don't have a "normally" working OS.
    Sorry that I made you upload the Qt4.4 as it turns out that my problems are probably in me and not in the Qt, KDE or Arch

  • Audio and Video Out of Sync  -AV sync problem

    Edited a bunch of clips together from Canon T1i 720p, iPhone 3GS, Canon SX110, and Sony DSC-W70. About an hour long. Everything looks great when played within iMovie '11, but when exported, the audio and video get out of sync. It gets progressively worse the farther along you are in the sequence. AV is as much as 6 seconds off by the end!! Audio is ahead of the video. I've tried exporting in several different ways including: Export to iDVD, Export to Media Browser 720p, with the same results.
    Anyone else having this problem? I know I've done this with success in the past with iMovie '09.

    Im having the same issue I have a project that is 9 minutes long tried all before even looking at the forum but It will not sync. Some one even told me to repair the permissions so nothing worked. I went to the Mac store no body knew what I was talking about so they asked me to call Apple so I did and was hung up on 3 times not only that but I was advised since I just bought the product I did have 3 months of tech support.
    I mean I'm having an issue and they tell me I have 90 days of free service? This has got to be a joke. I than asked well can I just take it back and instal my 09 back? I was advised nope you wont be able to do so and you cant get your money back.
    After this whole mishap I did learned that the less snips and clips and editing is on the project the sync and video will be ok but if you have lots clips such as most of us than we will continue on having this issue.
    We need a fix ASAP

  • HT2729 I bought a TV episode from iTunes (I have version 10 installed), but when I try to play it on my laptop, it keeps stopping and starting, with the voices out of sync with the action.  The action is stop/start as well.  What settings can I change to

    I bought a TV episode from iTunes (I have version 10 installed), but when I try to play it on my laptop, it keeps stopping and starting, with the voices out of sync with the action.  The action is stop/start as well., and occasionally it skips 5 or 10 seconds altogether, making it impossible to watch.  What settings can I change to fix the problem.

    Repair your QuickTime.
    Control Panel > Programs n Features > highlight QuickTime and click CHANGE then REPAIR.

  • Video and sound slightly out of sync when screen mirroring

    When I start screen mirroring and play a video, then my macbook screen matches perfectly with the sound output from my stereo, but my tv is slightly delayed compared to my macbook which makes the sound and video out of sync. it is something like 1/10th or 1/20th a second, but it is extremely annoying.
    Anyone has the same problem or knows how to solve this?

    What format were the original items ?
    What frame rate are they in the original ?
    What format are they on the AppleTV (H264 video AAC audio is the most common, but there are others) ?
    What is the video frame rate now ?
    Most out of syncs come from an imperfect attempt to encode for AppleTV. ie. DVD frame rate is 29.97fps. Many encode this to 30fps. So the movie plays 0.1% too fast, too little for you to notice, but at the end of a 100 minute film, the audio is 6 seconds out of sync with the video. Or 3 seconds on a 45 minute TV show.
    Also check the source. I'd had DVDs (Alien Resurrection) jump 10 seconds out of sync in the middle of the movie. Back to the shop for that one.

  • QT breaking up and sound out of sync - cpu or ram or browser problem?

    1. I try to watch BBC news video clips but can never get anything other than the sound out of sync, the picture breaking up and what I can only try to describe as a 'delayed streaming problem' where the film jumps frames from one frame to 'much later'.
    2. Also the BBC has options of 'screen size' - I can't go to their large size so am stuck with a small version. (I don't think this is associated with the core problem.)
    I play these clips either through Media Player or Real Player but it makes no difference.
    I have flip4mac installed. I have the ATI display drivers updated.
    I hope you understand the problem.
    I hope I'll understand the answers!
    Thanks for any helps.
    Gordon

    Another thing I've just noticed is that when the news clips are downloading and playing it is only at 36kbps. I have as far as I can set preferences at 256kbps.
    I am connected to DSL but I'm not sure at what rate the ISP delivers. (I know it's the cheapest!)
    Hope this helps anyone inclined to help.
    Thanks
    Gordon
    ps After the World Cup Final is ok!

  • HT4623 Videos from Netflix, youtube, etc. frequently stop, freeze and run out of sync on my ipad gen4.  Any hints as what to do to correct this problem?

    Videos on my ipad 4gen stop, freeze and when they do restart at times are out of sync.  This happens on Netflix, youtube, FoxNews, etc. Any suggestions as to the problem or correction.

    The most common cause of this type of issue is an inconsistant or slow internet connection.
    But, you might want to try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray BEFORE doing the reset.

  • Music slightly out of sync when exporting in Premiere CS6, format problem?

    Hi guys, i have a quick question.
    I edited together a promo for a local band and everything is perfect in the sequence as far as being on point with the music at certain beats and such. However when I export it the music is slightly out of sync, which is bad when you edited everything specificly to the song. I am not using ANY audio from the footage but instead layed a music track over everything. I'm not sure what else to do, could it be a format problem? I am using h.264 (see below), but would AVI or anything else work better? any help is appreciated thank you!
    I am exporting directly from inside Premiere CS6 using a custom H.264 preset. 24fps, VBR 2 pass encoding. Target 7MB, Max 11MB. (with render at maxium bit depth, and render at highest quaility selected.)
    I put the audio settings to high, 320kbs AAC format.
    I use a custom built PC with an i7-3770K, 32 GB RAM, and I exported to a 120GB SSD.
    Any other info you need just ask.any types for uploading to vimeo so it doesn't get out of sync there? thank you in advance!
    Also, any types for uploading to vimeo so it doesn't get out of sync there? thank you in advance!

    Hi,
    I dont think that you will really get a problem while exporting in any of the given formats. But i would really like to check if the audio layer is exactly same as of the video. for eg - if my audio is 00:05:30 and my video is 00:05:20 , we might face issue with the sync.
    We can try to put more black video to make it a match with the audio and then try to export.
    Where do you have the media files , on a internal drive like c: or desktop? In case not , try to move the media files to desktop and then try to export.
    Also instead of exporting the files to your 120GB SSD , try to export it on the desktop.
    Hope it helps.
    Thanks

Maybe you are looking for