Gnome && kde installation failed!!!

1)
I've tried pacman -Sy gnome
pacman -Sy gnome-extra, it installed both of them but can not get gnome to work;
the error is:
can not find libssl.so.0.9.7
I've tried a locat libssl and found libssl.so.0.9.6
i've copied it to libssl.so.0.9.7, and now another error is found
can not find libcrypto.so.0.9.6.
I just finished a few hours ago pacman -Su.
what must I install/update to make this work?
2)
pacman -Sy kde
after he downloaded every thing he said:
error: archive kde-base-3.2.2.1.pkg.tar.gz is corrupted
if I try again
pacman -Sy kde
it won't download and say this again.
what should I do ?

kde corrupted pkg:
[damir@Asteraceae /]$ rm /var/cache/pacman/pkg/kdebase-3.2.2.1.pkg.tar.gz
and then try again
libssl trouble:
hmm ...
is your system up-to-date? (pacman -Suy)
if so, can you tell, what programm is searching for 0.9.6?
good luck

Similar Messages

Installation Fails on Debian Stable 64 bit

Hi There
I have been trying to install skype for a while. The i386 architecture has already been enabled, and the repositories have been updated. I have repeated the process several times just to be sure.
During skype installation a bunch of conflicts occur and aptitude can only install skype by uninstalling most of my system, at which point I have to abort the installation. I have tried many different packages, including Ubuntu packages, old packages, old static packages, tarballs. Nothing helps. Here is the output from the terminal:
rojaslee@debian:~$ su
Password:
root@debian:/home/rojaslee# wget -O skype-install.deb http://www.skype.com/go/getskype-linux-deb
--2014-08-04 17:02:30-- http://www.skype.com/go/getskype-linux-deb
Resolving www.skype.com (www.skype.com)... 157.56.109.9
Connecting to www.skype.com (www.skype.com)|157.56.109.9|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: http://www.skype.com/go/getskype-linux-deb-32 [following]
--2014-08-04 17:02:30-- http://www.skype.com/go/getskype-linux-deb-32
Reusing existing connection to www.skype.com:80.
HTTP request sent, awaiting response... 302 Found
Location: http://download.skype.com/linux/skype-debian_4.3.0.37-1_i386.deb [following]
--2014-08-04 17:02:30-- http://download.skype.com/linux/skype-debian_4.3.0.37-1_i386.deb
Resolving download.skype.com (download.skype.com)... 23.15.9.139, 23.15.9.144
Connecting to download.skype.com (download.skype.com)|23.15.9.139|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 20118938 (19M) [application/octet-stream]
Saving to: `skype-install.deb'
100%[======================================>] 20,118,938 2.10M/s in 11s
2014-08-04 17:02:41 (1.81 MB/s) - `skype-install.deb' saved [20118938/20118938]
root@debian:/home/rojaslee# dpkg -i skype-install.deb
Selecting previously unselected package skype.
(Reading database ... 192729 files and directories currently installed.)
Unpacking skype (from skype-install.deb) ...
dpkg: dependency problems prevent configuration of skype:
skype depends on libc6 (>= 2.3.6-6~).
skype depends on libc6 (>= 2.7).
skype depends on libgcc1 (>= 1:4.1.1).
skype depends on libqt4-dbus (>= 4:4.5.3).
skype depends on libqt4-network (>= 4:4.8.0).
skype depends on libqt4-xml (>= 4:4.5.3).
skype depends on libqtcore4 (>= 4:4.7.0~beta1).
skype depends on libqtgui4 (>= 4:4.8.0).
skype depends on libqtwebkit4 (>= 2.1.0~2011week13).
skype depends on libstdc++6 (>= 4.2.1).
skype depends on libx11-6.
skype depends on libxext6.
skype depends on libxss1.
skype depends on libxv1.
skype depends on libssl1.0.0.
skype depends on libpulse0.
skype depends on libasound2-plugins.
dpkg: error processing skype (--install):
dependency problems - leaving unconfigured
Processing triggers for desktop-file-utils ...
Processing triggers for hicolor-icon-theme ...
Errors were encountered while processing:
skype
root@debian:/home/rojaslee# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following packages were automatically installed and are no longer required:
apache2.2-bin arj caja caja-common clearlooks-phenix-theme cli-common
cmake-data dmz-cursor-theme engrampa-common eom-common ffmpegthumbnailer
ffmpegthumbnailer-caja geany-common git-man gtk2-engines-pixbuf
gtk3-engines-unico hddtemp ibus-clutter ibus-gtk ibus-gtk3 ibus-qt4
im-config libapache2-mod-dnssd libapr1 libaprutil1 libaprutil1-dbd-sqlite3
libaprutil1-ldap libavahi-compat-libdnssd1 libavdevice53
libboost-system1.55.0 libclutter-1.0-0 libclutter-1.0-common
libclutter-imcontext-0.1-0 libclutter-imcontext-0.1-bin libcogl-common
libcogl-pango0 libcogl9 libelf1 liberror-perl libffmpegthumbnailer4
libgdiplus libgladeui-1-9 libgoocanvas-common libgoocanvas3 libgsoap2
libgtksourceview2.0-0 libgtksourceview2.0-common libhangul-data
libibus-1.0-0 libibus-qt1 libjson-glib-1.0-0 libmate libmate-common
libmatecanvas libmatecomponent libmatecomponentui libmatekbd libmatemenu
libmatepanelapplet libmatepolkit libmateui libmatevfs libmateweather
libmateweather-common libmatewnck libmatewnck-common libmlt++3 libmlt-data
libmlt5 libmono-accessibility4.0-cil libmono-corlib4.0-cil
libmono-i18n-west4.0-cil libmono-i18n4.0-cil libmono-security4.0-cil
libmono-system-configuration4.0-cil libmono-system-security4.0-cil
libmono-system-xml4.0-cil libmono-system4.0-cil libpgm-5.1-0 libprotobuf7
libquicktime2 librpm3 librpmbuild3 librpmio3 librpmsign1 libsox-fmt-alsa
libsox-fmt-base libsox2 libtasn1-3-bin libvncserver0 libwebcam0
libxmlrpc-core-c3 libxres1 mate-applets-common mate-backgrounds mate-desktop
mate-desktop-common mate-desktop-gnome mate-keyring mate-media
mate-media-common mate-media-gstreamer mate-menus mate-mime-data mate-panel
mate-panel-common mate-polkit mate-power-manager-common mate-settings-daemon
mate-settings-daemon-common mate-settings-daemon-gstreamer mate-themes
mate-vfs mate-vfs-common melt menu-xdg mono-4.0-gac mono-gac mono-runtime
openshot-doc p7zip-full pointlinux-faenza-icon-theme
pointlinux-mate-backgrounds pointlinux-mate-themes python-application
python-cjson python-crypto python-dateutil python-dnspython python-eventlib
python-gnutls python-greenlet python-gtksourceview2 python-httplib2
python-ibus python-lxml python-mate-desktop python-msrplib python-openssl
python-pam python-psutil python-pyasn1 python-pygoocanvas python-serial
python-twisted-bin python-twisted-conch python-twisted-core
python-twisted-lore python-twisted-mail python-twisted-names
python-twisted-news python-twisted-web python-twisted-words python-xcaplib
python-xdg python-zope.interface rpm rpm-common rpm2cpio tcl tcl8.5 tk tk8.5
uvcdynctrl uvcdynctrl-data x11vnc x11vnc-data zenity zenity-common
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
a2ps armory atril binfmt-support bitcoind blink cdrdao cmake cryptsetup
cups-pk-helper dropbox engrampa eom epdfview flashplugin-nonfree geany git
gnome-disk-utility google-talkplugin gparted grub-pc grub-pc-bin
gtk2-engines-xfce guvcview ibus ibus-hangul icedtea-6-jre-cacao
icedtea-6-jre-jamvm keepass2 libao4 libatkmm-1.6-1 libatril
libavahi-ui-gtk3-0 libboost-chrono1.55.0 libboost-filesystem1.55.0
libboost-program-options1.55.0 libboost-thread1.55.0 libcairo-perl
libcairomm-1.0-1 libdb5.3++ libdjvulibre21 libgarcon-1-0 libgdu-gtk0
libglib-perl libglibmm-2.4-1c2a libgtkmm-2.4-1c2a libhal-storage1 libhal1
libhangul1 libjpeg-progs libjpeg62 libkprintutils4 libmarco libmatebluetooth
libmatesensorsappletplugin libminiupnpc10 libmono-data-tds4.0-cil
libmono-posix4.0-cil libmono-system-data4.0-cil
libmono-system-drawing4.0-cil libmono-system-enterpriseservices4.0-cil
libmono-system-transactions4.0-cil libmono-system-windows-forms4.0-cil
libmono-webbrowser4.0-cil libmsgpack-dev libmsgpack3 libmsgpackc2
libmysqlclient18 libnm-glib-vpn1 libnm-glib4 libnm-gtk0 libnm-util2
libokularcore1 liboobs-1-5 libpangomm-1.4-1 libpoppler-qt4-3 libportaudio2
libprotobuf-dev libprotobuf-lite7 libprotoc7 libqimageblitz4
libqt4-sql-mysql libreoffice libreoffice-calc libreoffice-gtk libsane-extras
libslp1 libsocket-perl libspectre1 libt1-5 libtagc0 libthunar-vfs-1-2
libunique-3.0-0 libwnck22 libzmq-dev libzmq1 lightdm lm-sensors marco
mate-applets mate-bluetooth mate-calc mate-control-center mate-core
mate-desktop-environment mate-dialogs mate-netspeed mate-power-manager
mate-screensaver mate-sensors-applet mate-session-manager
mate-system-monitor mate-system-tools mate-terminal mate-text-editor
mate-user-share mate-utils mate-window-manager minissdpd mousepad mozo
network-manager network-manager-gnome okular open-vm-toolbox openshot
pcmciautils pkg-config powertop printer-driver-c2esp printer-driver-m2300w
protobuf-compiler python-corba python-mate python-mate-menu python-mlt5
python-sipsimple python-twisted python-twisted-runner skype:i386 smbclient
squeeze synaptic system-tools-backends tumbler virtualbox virtualbox-dkms
virtualbox-guest-dkms virtualbox-guest-utils virtualbox-guest-x11
virtualbox-qt xarchiver xcalib xfce4-taskmanager xfce4-terminal xinput
0 upgraded, 0 newly installed, 156 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 539 MB disk space will be freed.
Do you want to continue [Y/n]? n
Abort.
root@debian:/home/rojaslee#

Hi
Similar error with me: Installation fails due to the missing lib libqtwebkit4:i386 - it cannot been installed:
root@.../skype-4.3.0.37# aptitude install libqtwebkit4:i386
The following NEW packages will be installed:
libgstreamer-plugins-base0.10-0:i386{a} libgstreamer0.10-0:i386{a} libqtwebkit4:i386 libsqlite3-0:i386{ab}
0 packages upgraded, 4 newly installed, 0 to remove and 2 not upgraded.
Need to get 9,138 kB of archives. After unpacking 32.7 MB will be used.
The following packages have unmet dependencies:
libsqlite3-0 : Breaks: libsqlite3-0:i386 (!= 3.7.17-1~bpo70+1) but 3.7.13-1+deb7u1 is to be installed.
libsqlite3-0:i386 : Breaks: libsqlite3-0 (!= 3.7.13-1+deb7u1) but 3.7.17-1~bpo70+1 is installed.
The following actions will resolve these dependencies:
Keep the following packages at their current version:
1) libqtwebkit4:i386 [Not Installed]
2) libsqlite3-0:i386 [Not Installed]
Accept this solution? [Y/n/q/?]
If I would want to uninstall libsqlite3-0 and change to the i386-version (which would resolve the problem), I would uninstall most of my system...
Skype/MS: Please provide solution, best would be, creating a proper 64Bit-package, so the whole i386-crap could be forgotten...
If anybody has a solution, I would appreciate help, as - unfortunately - for some reasons I kind of depend on Skype
Kind regards
[Removed for privacy]

Install gnome/kde/xfce to /usr?

Why don't we just put everything into /usr? The /opt serves no purpose since all apps are installed/removed by pacman and not untar/rm. And where should you install an app that needs both of kde and gnome?? /opt/kde+gnome?
The reasons people are against this are summarized below:
· The standard says "Large software packages must not use a direct subdirectory under the /usr hierarchy": BUT kde and gnome are not large packages (like openoffice), but many small packages, just like the rest of linux. The "GNOME" or "KDE" is just a conceptual name for end-users. Any app or user could use 1% of gnome/kde packages and keep away from the other 99%.
· Puting all files into /usr is slow: There isn't any benchmark to confirm that. And a nearly-complete gnome 2.14 installation contains only about 100-200 files in /opt/gnome/bin/, compared to more than 1000 in /usr/bin. It just can't cause any slow down on modern linux filesystems. (it's 1,100+ not 11,000+)

once upon a time, it was simpler and certainly cleaner to put things in opt as we do, and we didnt have a standard telling us what to do. Time have changed since, and it's quite a monumental and time consuming task to move all of gnome, all of kde, and all of the various programs back to /usr, something that just doesnt seem like it will reap any benefit for all the effort. That's the sole reason why things are in opt. Simple.
Sure, there's the standard -- but because there's a standard, doesnt mean we must follow it. Plenty of people get caught up in the word 'standard' and instagib-flame-kinghit-ko-up-left-right-right-down anyone who speaks against a standard irrelevant of the quality or applicability of the standard.
It's not like most distros actually observe the standard anyway. I havn't seen a single distro having httpd serve out of /srv. The standard itself is out of date and contradictory. Xorg moved from X11R6 to /usr a while back now. Besides, why seperate X into X11R6? what makes it so special that it must be seperated yet kde and gnome cannot?
And is having kde and gnome seperate actually a violation of the standard?
It's no difficult stretch of the mind to consider them "Add-on application software packages" after all, they're not required for a system to run, and nor are they installed by default, they are addons after installation.
If we now look at the /usr section of the FHS, we see that:
/usr is the second major section of the filesystem. /usr is shareable, read-only data ..... Large software packages must not use a direct subdirectory under the /usr hierarchy.
It isnt difficult to consider KDE and GNOME large software packages. Saying they aren't large because they're split, is like calling OOo small if we split it up into each of it's components, libraries and programs. If you do decide to use any particular KDE and GNOME app, there exists something known as dependencies. For kde, you'll get a minimum of 30mb from kdebase, and that's just the tarball, not the extracted size.
The desktops themselves are quite large anyway. pacman -S gnome. I havn't got a clean install on me here, but it's surely a reasonable size to install to get a functioning GNOME desktop, KDE is definitely quite big, with kdebase alone being 30mb.
If you look at the actual standard, it's pretty flexible, and it's definition of /opt's purpose is very lofty. The rationale for it, is that "The use of /opt for add-on software is a well-established practice in the UNIX community"
http://www.pathname.com/fhs/pub/fhs-2.3 … REPACKAGES
And we can take their approach here too, not only is it fine to put kde and gnome in opt as they are addon packages, but we can use their own rationale and say "that's how we've always done it"
By no means do I remotely agree with the standard, but if you can use it to argue for putting them in /usr, you can also use it to argue for putting them in /opt. Either way, it negates this standard because of the ambiguity in this area and doesnt change the sole reason why things are in /opt in arch, which I explained first.
James

Camera Raw 6.7 Update for Mac OS 10.10: Installation Failed error message.

Camera Raw 6.7 Update for Mac: Installation Failed error message. Update downloaded directly from Adobe website. Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished. Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

I purchased and downloaded Photoshop Elements 13, but the installer fails to initialise. How do I get it to work?

I have Photoshop Elements 10 and Premier Elements 10 installed on my PC. Both were installed from discs that I bought a few years ago. I recently purchased the upgrade (by download) for both applications to version 13. In accordance with the (scant) instructions received by email, I downloaded the four files required from the Adobe site. I subsequently ran the .exe files, which in turn created directories on my PC, including set-up.exe files for both applications. When I run the setup files, I get an error message stating that the installer failed to initialise. The error message advised me to download the Adobe Support Advisor to detect the problem. That tool does not exist. I then sought assistance from the Abobe support site, initially using the hyperlink suggestions, which were of no use, then using the chat function. The operator kept trying to get me to do something with something called 'Creative Cloud'; which I am not familiar with, and do not use. He then instructed me to download and run a CS5 cleaner tool; however, none of the choices offered by that tool include my issue, or either Photoshop Elements or Premier Elements. I am reluctant to uninstall version 10 of the programs in case I end up losing the lot and therefore wasting even more money than the purchase price for this upgrade.
All I want to do is upgrade my two applications from version 10 to version 13. I have paid the requisite fee but it clearly does not work. I appear to have totally wasted my money. Can anyone please tell me how to get it to work? I do not want to have anything to do with the so-called ‘Creative Cloud’ as I have no idea what it is, and I do not want to lose what I already have (and have paid for previously).
I have tried for a few days to access the so-called 24/7 chat assistance but appeared to have been locked out as every time I try to access it, I get a message that the (24/7) chat is closed. Adobe has taken my money for a product that does not work, and also refuse to help me fix it.
I am very frustrated with a product I bought that does not work, and a 24/7 support service that clearly is not 24/7, and which refuses to assist me. Can anyone PLEASE tell me how to get this to work? Rod.

Hi,
Can you please share the logs?
You can use the Adobe Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
Thanks,
Shikha

How do I fix the following error Photoshop 13.1.2 for Creative Cloud Installation failed. Error Co

Photoshop 13.1.2 for Creative Cloud
Installation failed. Error Code: U44M1P7

What is the current version of Ps (Help->System Info), if you have 13.0.1.2 already applied then you need to re-install Ps to get Ps 13.1.2.
As 13.1.2 is a subscription patch this would not get applied over 13.0.1.2.
If this still does not resolves your issue, Kindly mail me installer logs.
For Mac:
"Library/Logs/Adobe",
For Win:
Program Fies(x86)\Common Files\Adobe\Installers
Please mail me @ [email protected]
Regards,
Ashutosh

What causes this message "Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7"?

What causes error code: U44M1P7? I have rebooted my machine multiple times and continue to get the same results.

Photoshop: Basic Troubleshooting steps to fix most issues
ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7
I found the manual update, which worked!
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5595&fileID= 5604

Hi Barbara,
For failed 13.1.2 update error U44M1P7, Please refer to the solution mentioned in the following threads :
http://forums.adobe.com/message/5396792#5396792
http://forums.adobe.com/message/5409050#5409050

Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7

Hello, I need some help. I am getting the following error just when updating my Photoshop CS6 app. U44M1P7

http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html#TroubleshootUpda…
Re-install on top of CS6 had to do that myself when I had perpetual CS6 installed and tried to update to Subscription version. Perpetual CS 6 13.0.1.3 Windows 13.0.6 Mac are different then 13.1.2 subscription version
Explanations of error codes:
U = Updater.
44 = Install Update Error
M1 = Automatic
M2 = Standalone mode
P = Patcher
6 = Done With Errors
7 = Installation Failed
ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Photoshop 13.1.2 for Creative Cloud Installation failed.

what to do ?
Error Code: U44M1P7 Dreamweaver CS6 Creative Cloud release – Feb. 2013 Installation failed. Error Code: U44M1P7
AND
Use of keys like "d" - "x" - "b" does not work when i`m i "b" modus Its impossible to use teh X and d keys in brushes mode. I`m also using a wacom tablet. all system and program is runnin the latest versions... pleas help ! :-)

CF-Wesenberg please see Installation failed. Error U44M1P7 | Updates - http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html for information on how to resolve the U44M1P7 error.

Photoshop 13.1.1 for Creative Cloud Installation failed

Photoshop 13.1.1 for Creative Cloud Installation failed. Error Code: U44M1P7. How do I solve?

Moroccoflowers please see http://forums.adobe.com/thread/1113531 in reference to the Photoshop update.

Photoshop 13.1 for Creative Cloud Installation failed. Error Code: U44M1P7

So, Lion won't let me deactivate, so I can't use the updates that I just bought with signing up for the Cloud, so I tried installing on my Mountain Lion Macbook and this is what I get...
Photoshop 13.1 for Creative Cloud
Installation failed. Error Code: U44M1P7
Please Help, somebody!
Spent about an hour with Adobe Tech support just trying to figure out why I couldn't deactivate my product, only to find I had to close the chat room and the advice still didn't work.
Very frustrated, here! I have no updates on either computer, now!

Hi Jules,
Sorry to hear about your difficulties.
My recommendation would be
- Uninstall PS via Mac HD > Applications > Utilities > Adobe Installers (Mac OS X)
- Create a new user with Admin rights, log out of your current account and into the newly created one
10.7 http://support.apple.com/kb/PH4600
10.8 http://support.apple.com/kb/PH11468
- Reinstall Photoshop CS6 via Adobe Application Manager
- Try to update to 13.1 using Help > Updates in Photoshop CS6
-Dave

Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility bu

Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility but nothing seems to work. Exit code: 7.

Hi Maarton,
Please follow the link to resolve the issue: Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
-Ankit

"Installation Failed" when trying to install CS6 on a machine that has

I am trying to install CS6 and keep getting "Installation Failed" error. I have restarted. Quit all applications. Uninstalled old versions of CS (Except CS5).
I have a Macbook Pro from 2006. 2.16 GHz Intel Core Duo. Running OS 10.6.8.
I looked at the log and the summary is as follows:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 9 error(s), 9 warning(s)
----------- Payload: {AAF0D225-F129-40F2-916E-12E28DBD19ED} Adobe Illustrator CS6 Core 16.0.0.0 -----------
ERROR: DF031: Unable to read display attributes of "/Applications/Adobe Illustrator CS6/Plug-ins.localized"(Seq 11263)
WARNING: DW063: Command ARKSetDisplayAttributesCommand failed.(Seq 11263)
ERROR: DF031: Unable to read display attributes of "/Applications/Adobe Illustrator CS6/Plug-ins.localized/Icon
"(Seq 11264)
WARNING: DW063: Command ARKSetDisplayAttributesCommand failed.(Seq 11264)
ERROR: DF031: Unable to read display attributes of "/Applications/Adobe Illustrator CS6"(Seq 15033)
WARNING: DW063: Command ARKSetDisplayAttributesCommand failed.(Seq 15033)
ERROR: DF031: Unable to read display attributes of "/Applications/Adobe Illustrator CS6/Icon
"(Seq 15034)
WARNING: DW063: Command ARKSetDisplayAttributesCommand failed.(Seq 15034)
----------- Payload: {97BA0109-F6BE-4F50-8904-C19442D7216E} Adobe Bridge CS6 5.0.0.0 -----------
ERROR: DF031: Unable to read display attributes of "/Users/emilylozano/.Trash/Adobe Bridge CS6"(Seq 2517)
WARNING: DW063: Command ARKSetDisplayAttributesCommand failed.(Seq 2517)
ERROR: DF031: Unable to read display attributes of "/Users/emilylozano/.Trash/Adobe Bridge CS6/Icon
"(Seq 2518)
WARNING: DW063: Command ARKSetDisplayAttributesCommand failed.(Seq 2518)
----------- Payload: {4482EF4A-376B-46DE-9B17-E377232328E0} PDF Settings CS6 11.0.0.0 -----------
ERROR: DF001: Unable to get permissions of "/Library/Application Support/Adobe/Adobe PDF/Extras"(Seq 177)
WARNING: DW063: Command ARKChmodCommand failed.(Seq 177)
----------- Payload: {EB2A8CD4-B247-4810-A294-E3DB8EDC6060} Adobe CSXS Extensions CS6 3.0.0.0 -----------
ERROR: DF037: Unable to delete directory "/Users/emilylozano/Library/Application Support/Adobe/CS6ServiceManager"(Seq 2)
WARNING: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 2)
----------- Payload: {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} Suite Shared Configuration CS6 3.0.0.0 -----------
ERROR: DF037: Unable to delete directory "/Library/Application Support/Adobe/PCF"(Seq 2)
WARNING: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 2)
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 0 - No error.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DF001, DF031 ... WARNING: DW063 ...
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
Thanks!

Run the cleaner tool :- http://www.adobe.com/support/contact/cscleanertool.html
Enable root user account ( http://support.apple.com/kb/ht1528) and then install the software from the root user.

SAP NW7.0 SR3 Java AddIn Installation failed at "Import Java dump"

Dear all,
I get an error at Java AddIn Installation SAP Netweaver 7.0 SR3
(Software Life-Cycle Option -> Java Add-In for ABAP -> Oracle ->
Central System ->)
The first installation step "Central Services Instance (SCS) Java Add-
In" I have installed it without errors.
The Installation failed at 2nd step "Database Instance Java Add-In" at phase 11
of 14 "Import java dump":
26.05.09 15:16:46 com.sap.inst.jload.Jload main
INFO: Jload -sec
Q2B,jdbc/pool/Q2B,/usr/sap/Q2B/SYS/global/security/data/SecStore.properties,/usr/sap/Q2B/SYS/global/security/
data/SecStore.key -
dataDir /usr/sap/swdc/51033513/DATA_UNITS/JAVA_EXPORT_JDMP -
job /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN
/ORA/CENTRAL/DB/IMPORT.XML -log jload.log
26.05.09 15:16:47 com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
26.05.09 15:16:47 com.sap.inst.jload.Jload logStackTrace
SEVERE: java.sql.SQLException: Io exception: The Network Adapter could
not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException
(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException
(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException
(DatabaseError.java:255)
at oracle.jdbc.driver.T4CConnection.logon
(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>
(PhysicalConnection.java:420)
at oracle.jdbc.driver.T4CConnection.<init>
(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection
(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect
(OracleDriver.java:801)
at
com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection
(NativeConnectionFactory.java:215)
at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection
(OpenSQLDataSourceImpl.java:522)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection
(OpenSQLDataSourceImpl.java:276)
at com.sap.inst.jload.db.DBConnection.connectViaSecureStore
(DBConnection.java:105)
at com.sap.inst.jload.db.DBConnection.connect
(DBConnection.java:149)
at com.sap.inst.jload.Jload.main(Jload.java:580)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke
(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main
(OfflineToolStart.java:81)
the database is up and running, the Oracle Listener is also working well.
Any idea??
Thanks so much in advance!
Best Regards,
Gerd

Hi Sunny, hi Markus!
many thanks for your hints!
I've just solved the problem. The problem was, our Listener was not configured correctly.
I've adjusted the listener.ora, tnsnames.ora to the correct hostname - cause, we had a hostname-switch last month and I had forgotten to adapt the Listener...
now the Listener is running as well:
mcho35au:oraq2b 120% lsnrctl status LISTENER_Q2B
LSNRCTL for Solaris: Version 10.2.0.4.0 - Production on 30-MAY-2009
09:52:48
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=Q2B.WORLD))
STATUS of the LISTENER
Alias LISTENER_Q2B
Version TNSLSNR for Solaris: Version 10.2.0.4.0 -
Production
Start Date 30-MAY-2009 09:52:15
Uptime 0 days 0 hr. 0 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/Q2B/102_64/network/admin/listener.ora
Listener Log
File /oracle/Q2B/102_64/network/log/listener_q2b.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=Q2B.WORLD)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=Q2B)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mcho35au)(PORT=1527)))
Services Summary...
Service "Q2B" has 1 instance(s).
Instance "Q2B", status UNKNOWN, has 1 handler(s) for this service...
Service "Q2B.WORLD" has 1 instance(s).
Instance "Q2B", status READY, has 1 handler(s) for this service...
Service "Q2B_XPT.WORLD" has 1 instance(s).
Instance "Q2B", status READY, has 1 handler(s) for this service...
The command completed successfully
meanwhile the step "Import java dump" has finished successfully!
Thanks to all!
Best Regards,
Gerd
Edited by: Gerd Schuster on May 30, 2009 10:29 AM

Gnome && kde installation failed!!!

Similar Messages

Maybe you are looking for