Gnome Program Access Problems

Hi,
Is their a reason why Arch Linux accesses the hard drive every time I open an app, even if I open it repeatedly? Other operating systems tend to cache the latest apps for performance reasons but my Arch isn't....Any suggestions.
Note my specs - Athlon 2.7GHz 3G RAM
Applications that I really notice this behavior - Nautilus, Firefox well any app.

How are your performance settings setup on this machine? e.g. hard drive settings etc ... ?

Similar Messages

  • Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

    Hi Everyone,
    I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
    The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
    I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
    to another computer.
    My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
    The following are some details about the problem:
    1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
    I know this because a current is being read on the current meter connected to field point module.
    My questions are the following:
    1. What are the possible reasons for the data not being sent to the field point module?
    2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
    Thankyou very much for any help that you can provide. I greatly appreciate it.
    Faen9901

    Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
    1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
    2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
    3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
    choose to provide LabWindows/CVI support.
    Regards,
    Aaron

  • RE: Database (SQL-SERVER) access problem

    Have you used NT Control Panel/ ODBC to set up the ODBC data source name?
    You have to define the data source (database) SecTrade as well as the
    driver to be used (SQL Server). This can be done by selecting the Add
    button on the Data Sources screen in Control Panel/ ODBC.
    Hope this helps.
    Sanjay Murthi
    Indus Consultancy Services, Inc.
    From: Administrator
    Sent: Wednesday, August 13, 1997 6:49 PM
    To: "'[email protected]'"
    Cc: murthis; thyagarajm; thyagarm; vasasm; chandraa
    Subject: Database (SQL-SERVER) access problems
    MCI Mail date/time: Mon Aug 11, 1997 10:28 pm EST
    Source date/time: Mon, 11 Aug 1997 19:25:34 +0530
    Hi Forte-Users,
    We have a setup a Sql-Server database on a NT server. In the Forte
    EConsole,
    we have
    setup a ODBC-type Resource for this server, named SERVER2_ODBC. This NT
    server
    is configured as a Client Node in the active Forte environment. Note
    that
    Server2 is not
    the Forte server, but has Forte installed. There is another NT server
    which
    acts as the
    Forte server. NODEMGR and Sql-Server are running on SERVER2.
    In our application, we have a DBSession SO with the database source
    as SERVER2_ODBC, Userid=ForteInstructor. When running the application,
    Forte
    throws an exception, the gist of it being as follows:
    USER ERROR: (This error was converted)
    Failed to connect to database: SecTrade, username: ForteInstructor.
    [Microsoft][ODBC Driver Manager] Data source name not found and no
    default
    driver specified
    We have tried
    1) Installing ODBC drivers on the NT server (Server2)
    2) Accessing local databases from Forte clients which works fine
    3) Accessing the Sql-Server database through Isqlw (Sql-Server Client
    s/w) -
    It works.
    Could someone suggest what we should try to get rid of this problem?
    Thanks for any help,
    Kishore Puvvada

    Rajsarawat wrote:
    Dear sir/mam,
    I have installed sql server 2005 (server) and on another computer installed client. It installed successfully but on client side it does not seen, from where should i start it. so please send me procedure to install sql server 2005 on both side(client and server).You have to turn on network (external to your computer) access.
    Under programs->sql server look for "surface"

  • What program access hard disk every 30 second?

    I have a very loud hard disk. The hard disk make a very short noice every 30 seconds, even for a new boot. Anyway to check which programming access the hard disk repeatly so I can figure out if it's possible to make the machine quiet?

    somthing I read about disk flush/sync timings.  There is some sort of 'laptop' mode in some kernels that if set will cause the disk to sync after a period of time in order to let APM/ACPI put the drive to sleep.
    There may be settings for your filesystem to do the same(!?).  I remember old Windoze NT4 had similar problem and was not remedied until Win2k for use on laptops .... yuck, ... I said the W word.
    Here's something I just dug-up:
    Laptop mode ===========
    This small doc describes the 2.4 laptop mode patch.
    Last updated 2003-05-25, Jens Axboe <[email protected]>
    Introduction ------------
    A few properties of the Linux vm makes it virtually impossible to attempt to spin down the hard drive in a laptop for a longer period of time (more than a handful of seconds). This means you are lucky if you can even reach the break even point with regards to power consumption, let alone expect any decrease.
    One problem is the age time of dirty buffers. Linux uses 30 seconds per default, so if you dirty any data then flusing of that data will commence at most 30 seconds from then. Another is the journal commit interval of journalled file systems such as ext3, which is 5 seconds on a stock kernel. Both of these are tweakable either from proc/sysctl or as mount options though, and thus partly solvable from user space.
    The kernel update daemon (kupdated) also runs at specific intervals, flushing old dirty data out. Default is every 5 seconds, this too can be tweaked from sysctl.
    So what does the laptop mode patch do? It attempts to fully utilize the hard drive once it has been spun up, flushing the old dirty data out to disk. Instead of flushing just the expired data, it will clean everything. When a read causes the disk to spin up, we kick off this flushing after a few seconds. This means that once the disk spins down again, everything is up to date. That allows longer dirty data and journal expire times.
    It follows that you have to set long expire times to get long spin downs. This means you could potentially loose 10 minutes worth of data, if you set a 10 minute expire count instead of just 30 seconds worth. The biggest risk here is undoubtedly running out of battery.
    Settings --------
    The main knob is /proc/sys/vm/laptop mode. Setting that to 1 switches the vm (and block layer) to laptop mode. Leaving it to 0 makes the kernel work like before. When in laptop mode, you also want to extend the intervals desribed above. See the laptop-mode.sh script for how to do that.
    It can happen that the disk still keeps spinning up and you don't quite know why or what causes it. The laptop mode patch has a little helper for that as well, /proc/sys/vm/block-dump. When set to 1, it will dump info to the kernel message buffer about what process caused the io. Be very careful when playing with this setting, it is advisable to shut down syslog first!
    Result ------
    Using the laptop-mode.sh script with its default settings, I get the full 10 minutes worth of drive spin down. Provided your work load is cached, the disk will only spin up every 10 minutes (well actually, 9 minutes and 55 seconds due to the 5 second delay in flushing dirty data after the last read completes). I can't tell you exactly how much extra battery life you will gain in laptop mode, it will vary greatly on the laptop and workload in question. The only way to know for sure is to try it out. Getting 10% extra battery life is not unrealistic.
    Notes -----
    Patch only changes journal expire time for ext3. reiserfs uses a hardwire value, should be trivial to adapt though (basically just make it call get_buffer_flushtime() and uses that). I have not looked at other journalling file systems, I'll happily accept patches to rectify that!

  • Parent control permissions and program access

    I have different uses on my account so I can use parent controls and keep unwanted internet content out of my computer, however, this has created an access problem in that I can no longer use programs I usually use without having to log into the administrator account every time I want to use a program. Some programs I have been able to get working, but others refuse to be accessible even though I have marked them as available in the user access section in parental controls. Can you help?

    You should not be sharing your account with someone who requires parental controls to be enabled. Create accounts for the other users to use, and keep yours for yourself. Then turn off parental controls on your account.
    Also, note that if the primary intent is to limit internet access to certain types of site, you might want to try [OpenDNS|https://www.opendns.com>, which provides a filtering feature that is far superior (IMHO) to the parental controls in Mac OS X.

  • Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...

    When the installation is done according to the documentation,
    web access does not work because the scripts that add entries to
    the jserv.properties file add duplicate references to
    wrapper.env and wrapper.classpath. Look at the jserv.properties
    file below and look at the remarked-out (#) lines of the
    duplicate references. For example, look at the references to the
    wrapper.env=LD_LIBRARY_PATH
    Oracle, please note this bug so the web access problems are
    minimized when the product is intstalled.
    Thank you,
    William T.
    # Apache JServ Configuration
    File #
    ################################ W A R N I N G
    # Unlike normal Java properties, JServ configurations have some
    important
    # extensions:
    # 1) commas are used as token separators
    # 2) multiple definitions of the same key are concatenated in
    a
    # comma separated list.
    # Execution parameters
    # The Java Virtual Machine interpreter.
    # Syntax: wrapper.bin=[filename] (String)
    # Note: specify a full path if the interpreter is not visible in
    your path.
    wrapper.bin=/d3/Apache/jdk/bin/java
    # Arguments passed to Java interpreter (optional)
    # Syntax: wrapper.bin.parameters=[parameters] (String)
    # Default: NONE
    wrapper.bin.parameters=-Xms64m
    wrapper.bin.parameters=-Xmx128m
    # Apache JServ entry point class (should not be changed)
    # Syntax: wrapper.class=[classname] (String)
    # Default: "org.apache.jserv.JServ"
    # Arguments passed to main class after the properties filename
    (not used)
    # Syntax: wrapper.class.parameters=[parameters] (String)
    # Default: NONE
    # Note: currently not used
    # PATH environment value passed to the JVM
    # Syntax: wrapper.path=[path] (String)
    # Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
    # "c:\(windows-dir);c:\(windows-system-dir)" for Win32
    systems
    # Notes: if more than one line is supplied these will be
    concatenated using
    # ":" or ";" (depending wether Unix or Win32) characters
    # Under Win32 (windows-dir) and (windows-system-dir) will
    be
    # automatically evaluated to match your system
    requirements
    # CLASSPATH environment value passed to the JVM
    # Syntax: wrapper.classpath=[path] (String)
    # Default: NONE (Sun's JDK/JRE already have a default classpath)
    # Note: if more than one line is supplied these will be
    concatenated using
    # ":" or ";" (depending wether Unix or Win32) characters.
    JVM must be
    # able to find JSDK and JServ classes and any utility
    classes used by
    # your servlets.
    # Note: the classes you want to be automatically reloaded upon
    modification
    # MUST NOT be in this classpath or the classpath of the
    shell
    # you start the Apache from.
    wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
    wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
    wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
    # An environment name with value passed to the JVM
    # Syntax: wrapper.env=[name]=[value] (String)
    # Default: NONE on Unix Systems
    # SystemDrive and SystemRoot with appropriate values on
    Win32 systems
    wrapper.env=PATH=/d3/bin
    # An environment name with value copied from caller to Java
    Virtual Machine
    # Syntax: wrapper.env.copy=[name] (String)
    # Default: NONE
    # Uncomment the following lines to set the default locale and
    NLS_LANG
    # setting based on the environment variables.
    # wrapper.env.copy=LANG
    # wrapper.env.copy=NLS_LANG
    # Copies all environment from caller to Java Virtual Machine
    # Syntax: wrapper.env.copyall=true (boolean)
    # Default: false
    # Protocol used for signal handling
    # Syntax: wrapper.protocol=[name] (String)
    # Default: ajpv12
    # General parameters
    # Set the default IP address or hostname Apache JServ binds (or
    listens) to.
    # If you have a machine with multiple IP addresses, this address
    # will be the one used. If you set the value to localhost, it
    # will be resolved to the IP address configured for the locahost
    # on your system (generally this is 127.0.0.1). This feature is
    so
    # that one can have multiple instances of Apache JServ listening
    on
    # the same port number, but different IP addresses on the same
    machine.
    # Use bindaddress=* only if you know exactly what you are doing
    here,
    # as it could let JServ wide open to the internet.
    # You must understand that JServ has to answer only to Apache,
    and should not
    # be reachable by nobody but mod_jserv. So localhost is usually a
    # good option. The second best choice would be an internal
    network address
    # (protected by a firewall) if JServ is running on another
    machine than Apache.
    # Ask your network admin.
    # "*" may be used on boxes where some of the clients get
    connected using
    # "localhost"and others using another IP addr.
    # Syntax: bindaddress=[ipaddress] or [localhost] or [*]
    # Default: localhost
    bindaddress=localhost
    # Set the port Apache JServ listens to.
    # Syntax: port=[1024,65535] (int)
    # Default: 8007
    port=8007
    # Servlet Zones parameters
    # List of servlet zones Apache JServ manages
    # Syntax: zones=[servlet zone],[servlet zone]... (Comma
    separated list of String)
    # Default: NONE
    zones=root
    # Configuration file for each servlet zone (one per servlet zone)
    # Syntax: [servlet zone name as on the zones list].properties=
    [full path to configFile]
    (String)
    # Default: NONE
    # Note: if the file could not be opened, try using absolute
    paths.
    root.properties=/d3/Apache/Jserv/etc/zone.properties
    # Thread Pool parameters
    # Enables or disables the use of the thread pool.
    # Syntax: pool=true (boolean)
    # Default: false
    # WARNING: the pool has not been extensively tested and may
    generate
    deadlocks.
    # For this reason, we advise against using this code in
    production environments.
    pool=false
    # Indicates the number of idle threads that the pool may contain.
    # Syntax: pool.capacity=(int)>0
    # Default: 10
    # NOTE: depending on your system load, this number should be low
    for contantly
    # loaded servers and should be increased depending on load
    bursts.
    pool.capacity=10
    # Indicates the pool controller that should be used to control
    the
    # level of the recycled threads.
    # Syntax: pool.controller=[full class of controller] (String)
    # Default: org.apache.java.recycle.DefaultController
    # NOTE: it is safe to leave this unchanged unless special
    recycle behavior
    # is needed. Look at the "org.apache.java.recycle" package
    javadocs for more
    # info on other pool controllers and their behavior.
    pool.controller=org.apache.java.recycle.DefaultController
    # Security parameters
    # Enable/disable the execution of org.apache.jserv.JServ as a
    servlet.
    # This is disabled by default because it may give informations
    that should
    # be restricted.
    # Note that the execution of Apache JServ as a servlet is
    filtered by the web
    # server modules by default so that both sides should be enabled
    to let this
    # service work.
    # This service is useful for installation and configuration
    since it gives
    # feedback about the exact configurations Apache JServ is using,
    but it should
    # be disabled when both installation and configuration processes
    are done.
    # Syntax: security.selfservlet=true (boolean)
    # Default: false
    # WARNING: disable this in a production environment since may
    give reserved
    # information to untrusted users.
    security.selfservlet=true
    # Set the maximum number of socket connections Apache JServ may
    handle
    # simultaneously. Make sure your operating environment has
    enough file
    # descriptors to allow this number.
    # Syntax: security.maxConnections=(int)>1
    # Default: 50
    security.maxConnections=50
    # Backlog setting for very fine performance tunning of JServ.
    # Unless you are familiar to sockets leave this value commented
    out.
    # security.backlog=5
    # List of IP addresses allowed to connect to Apache JServ. This
    is a first
    # security filtering to reject possibly unsecure connections and
    avoid the
    # overhead of connection authentication.
    # <warning>
    # (please don't use the following one unless you know what you
    are doing :
    # security.allowedAddresses=DISABLED
    # allows connections on JServ'port from entire internet.)
    # You do need only to allow YOUR Apache to talk to JServ.
    # </warning>
    # Default: 127.0.0.1
    # Syntax: security.allowedAddresses=[IP address],[IP Address]...
    (Comma
    separated list of IP addresses)
    #security.allowedAddresses=127.0.0.1
    # Enable/disable connection authentication.
    # NOTE: unauthenticated connections are a little faster since
    authentication
    # handshake is not performed at connection creation.
    # WARNING: authentication is disabled by default because we
    believe that
    # connection restriction from all IP addresses but localhost
    reduces your
    # time to get Apache JServ to run. If you allow other addresses
    to connect and
    # you don't trust it, you should enable authentication to
    prevent untrusted
    # execution of your servlets. Beware: if authentication is
    disabled and the
    # IP address is allowed, everyone on that machine can execute
    your servlets!
    # Syntax: security.authentication=[true,false] (boolean)
    # Default: true
    security.authentication=false
    # Authentication secret key.
    # The secret key is passed as a file that must be kept secure
    and must
    # be exactly the same of those used by clients to authenticate
    themselves.
    # Syntax: security.secretKey=[secret key path and filename]
    (String)
    # Default: NONE
    # Note: if the file could not be opened, try using absolute
    paths.
    #security.secretKey=./etc/jserv.secret.key
    # Length of the randomly generated challenge string (in bytes)
    used to
    # authenticate connections. 5 is the lowest possible choice to
    force a safe
    # level of security and reduce connection creation overhead.
    # Syntax: security.challengeSize=(int)>5
    # Default: 5
    #security.challengeSize=5
    # Logging parameters
    # Enable/disable Apache JServ logging.
    # WARNING: logging is a very expensive operation in terms of
    performance. You
    # should reduced the generated log to a minumum or even disable
    it if fast
    # execution is an issue. Note that if all log channels (see
    below) are
    # enabled, the log may become really big since each servlet
    request may
    # generate many Kb of log. Some log channels are mainly for
    debugging
    # purposes and should be disabled in a production environment.
    # Syntax: log=[true,false] (boolean)
    # Default: true
    log=true
    # Set the name of the trace/log file. To avoid possible
    confusion about
    # the location of this file, an absolute pathname is recommended.
    # This log file is different than the log file that is in the
    # jserv.conf file. This is the log file for the Java portion of
    Apache
    # JServ.
    # On Unix, this file must have write permissions by the owner of
    the JVM
    # process. In other words, if you are running Apache JServ in
    manual mode
    # and Apache is running as user nobody, then the file must have
    its
    # permissions set so that that user can write to it.
    # Syntax: log.file=[log path and filename] (String)
    # Default: NONE
    # Note: if the file could not be opened, try using absolute
    paths.
    log.file=/d3/Apache/Jserv/logs/jserv.log
    # Enable the timestamp before the log message
    # Syntax: log.timestamp=[true,false] (boolean)
    # Default: true
    log.timestamp=true
    # Use the given string as a data format
    # (see java.text.SimpleDateFormat for the list of options)
    # Syntax: log.dateFormat=(String)
    # Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
    log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
    # Since all the messages logged are processed by a thread
    running with
    # minimum priority, it's of vital importance that this thread
    gets a chance
    # to run once in a while. If it doesn't, the log queue overflow
    occurs,
    # usually resulting in the OutOfMemoryError.
    # To prevent this from happening, two parameters are used:
    log.queue.maxage
    # and log.queue.maxsize. The former defines the maximum time for
    the logged
    # message to stay in the queue, the latter defines maximum
    number of
    # messages in the queue.
    # If one of those conditions becomes true (age > maxage || size
    maxsize),# the log message stating that fact is generated and the log
    queue is
    # flushed in the separate thread.
    # If you ever see such a message, either your system doesn't
    live up to its
    # expectations or you have a runaway loop (probably, but not
    necessarily,
    # generating a lot of log messages).
    # WARNING: Default values are lousy, you probably want to tweak
    them and
    # report the results back to the development team.
    # Syntax: log.queue.maxage = [milliseconds]
    # Default: 5000
    log.queue.maxage = 5000
    # Syntax: log.queue.maxsize = [integer]
    # Default: 1000
    log.queue.maxsize = 1000
    # Enable/disable logging the channel name
    # Default: false
    # log.channel=false
    # Enable/disable channels, each logging different actions.
    # Syntax: log.channel.[channel name]=[true,false] (boolean)
    # Default: false
    # Info channel - quite a lot of informational messages
    # hopefully you don't need them under normal circumstances
    # log.channel.info=true
    # Servlets exception, i.e. exception caught during
    # servlet.service() processing are monitored here
    # you probably want to have this one switched on
    log.channel.servletException=true
    # JServ exception, caught internally in jserv
    # we suggest to leave it on
    log.channel.jservException=true
    # Warning channel, it catches all the important
    # messages that don't cause JServ to stop, leave it on
    log.channel.warning=true
    # Servlet log
    # All messages logged by servlets. Probably you want
    # this one to be switched on.
    log.channel.servletLog=true
    # Critical errors
    # Messages produced by critical events causing jserv to stop
    log.channel.critical=true
    # Debug channel
    # Only for internal debugging purposes
    # log.channel.debug=true
    #wrapper.classpath=/d3/ord/jlib/ordim.zip
    #wrapper.classpath=/d3/ord/jlib/ordhttp.zip
    # Oracle XSQL Servlet
    wrapper.classpath=/d3/lib/oraclexsql.jar
    # Oracle JDBC
    wrapper.classpath=/d3/jdbc/lib/classes12.zip
    # Oracle XML Parser V2 (with XSLT Engine)
    wrapper.classpath=/d3/lib/xmlparserv2.jar
    # Oracle XML SQL Components for Java
    wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
    # XSQLConfig.xml File location
    wrapper.classpath=/d3/xdk/admin
    # Oracle BC4J
    wrapper.classpath=/d3/ord/jlib/ordim.zip
    wrapper.classpath=/d3/ord/jlib/ordvir.zip
    wrapper.classpath=/d3/ord/jlib/ordhttp.zip
    wrapper.classpath=/d3/BC4J/lib/jndi.jar
    wrapper.classpath=/d3/BC4J/lib/jbomt.zip
    wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
    wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
    wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
    wrapper.classpath=/d3/BC4J/lib/jboremote.zip
    wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
    wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
    wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
    wrapper.classpath=/d3/BC4J/lib/collections.jar
    wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
    #wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
    ineOrders.jar
    # The following classpath entries are necessary for EJBs to run
    in IAS or DB when
    present
    wrapper.classpath=/d3/lib/aurora_client.jar
    wrapper.classpath=/d3/lib/vbjorb.jar
    wrapper.classpath=/d3/lib/vbjapp.jar
    # Oracle Servlet
    wrapper.classpath=/d3/lib/servlet.jar
    # Oracle Java Server Pages
    wrapper.classpath=/d3/jsp/lib/ojsp.jar
    # Oracle Util
    wrapper.classpath=/d3/jsp/lib/ojsputil.jar
    # Oracle Java SQL
    wrapper.classpath=/d3/sqlj/lib/translator.zip
    # Oracle JDBC
    #wrapper.classpath=/d3/jdbc/lib/classes12.zip
    # SQLJ runtime
    wrapper.classpath=/d3/sqlj/lib/runtime12.zip
    # Oracle Messaging
    wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
    wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
    # OJSP environment settings
    #wrapper.env=ORACLE_HOME=/d3
    # The next line should be modified to reflect the value of the
    SID for your
    webserver.
    #wrapper.env=ORACLE_SID=cmpdb
    #wrapper.env=LD_LIBRARY_PATH=/d3/lib
    ## Enable the flag below if you are using jdk 1.2.2_05a or above
    #wrapper.env=JAVA_COMPILER=NONE
    # Advanced Queuing - AQXML
    wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
    #wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
    #wrapper.classpath=/d3/lib/xmlparserv2.jar
    wrapper.classpath=/d3/lib/xschema.jar
    #wrapper.classpath=/d3/jlib/jndi.jar
    wrapper.classpath=/d3/jlib/jta.jar
    oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
    g.properties
    zones = root, oemreporting
    wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
    wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
    wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
    wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
    wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
    wrapper.classpath=/d3/jlib/regexp.jar
    wrapper.classpath=/d3/jlib/sax2.jar
    #wrapper.classpath=/d3/jlib/servlet.jar
    wrapper.bin.parameters= -DORACLE_HOME=/d3
    #wrapper.env=LD_LIBRARY_PATH=/d3/lib32
    wrapper.env.copy=DISPLAY
    wrapper.bin.parameters=-DORACLE_HOME=/d3
    #wrapper.classpath=/d3/lib/vbjorb.jar
    #wrapper.classpath=/d3/lib/vbjapp.jar
    wrapper.classpath=/d3/classes/classesFromIDLVisi
    wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
    wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
    wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
    wrapper.classpath=/d3/jlib/share-1_1_9.jar
    wrapper.classpath=/d3/jlib/help-3_2_9.jar
    wrapper.classpath=/d3/jlib/ice-5_06_3.jar
    wrapper.classpath=/d3/jdbc/lib/classes111.zip
    wrapper.classpath=/d3/classes
    wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
    wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
    wrapper.classpath=/d3/jlib
    wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
    wrapper.classpath=/d3/jlib/jssl-1_1.jar
    wrapper.classpath=/d3/jlib/netcfg.jar
    wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
    #wrapper.classpath=/d3/lib/aurora_client.jar
    #wrapper.classpath=/d3/lib/xmlparserv2.jar
    wrapper.classpath=/d3/network/jlib/netmgrm.jar
    wrapper.classpath=/d3/network/jlib/netmgr.jar
    wrapper.classpath=/d3/network/tools
    wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
    wrapper.classpath=/d3/sysman/jlib/netchart360.jar
    wrapper.classpath=/d3/jlib/pfjbean.jar
    wrapper.env=SHLIB_PATH=/d3/lib32
    wrapper.env=LIBPATH=/d3/lib32
    wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
    wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
    wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
    wrapper.classpath=/d3/lib/mail.jar
    wrapper.classpath=/d3/lib/activation.jar
    wrapper.classpath=/d3/ultrasearch/jsp/admin/config
    # Additions for iFS
    ## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
    # iFS true
    # Uncomment if you want to use the same Jserv as other
    applications
    wrapper.classpath=/d3/9ifs/custom_classes
    wrapper.classpath=/d3/9ifs/settings
    wrapper.classpath=/d3/9ifs/lib/adk.jar
    wrapper.classpath=/d3/9ifs/lib/email.jar
    wrapper.classpath=/d3/9ifs/lib/http.jar
    wrapper.classpath=/d3/9ifs/lib/release.jar
    wrapper.classpath=/d3/9ifs/lib/repos.jar
    wrapper.classpath=/d3/9ifs/lib/utils.jar
    wrapper.classpath=/d3/9ifs/lib/webui.jar
    wrapper.classpath=/d3/9ifs/lib/provider.jar
    wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
    wrapper.classpath=/d3/jlib/jssl-1_2.jar
    wrapper.env=ORACLE_HOME=/d3
    wrapper.env=ORACLE_SID=cmpdb
    wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
    wrapper.env=NLS_LANG=.US7ASCII
    ## Additions for the iFS zone
    # Uncomment if you want to use the same Jserv as other
    applications
    zones=ifs
    ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
    # End iFS section

    About your home page; Manually set up Firefox with the window(s) and tab(s)
    the way you want them to be. Then;
    '''''Firefox Options > General > Homepage'''''.
    Press the button labeled ''''Use Current'''.'
    =====================================
    Open a new window or tab. In the address bar, type '''''about:config'''''.
    If a warning screen comes up, press the '''''Be Careful''''' button.
    This is where Firefox finds information it needs to run.
    At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
    and press enter. '''''browser.newtab.url'''''
    tells Firefox what to show when a new tab is opened.
    If you want, right click and select '''''Modify'''''. You can change the
    setting to;<BR><BR>about:home (Firefox default home page),<BR>
    about:newtab (shows the sites most visited),<BR>
    about:blank (a blank page),<BR>
    or you can enter any web page you want.<BR><BR>
    The same instructions are used for the new window setting, listed as
    '''''browser.startup.homepage'''''.

  • I want to uninstall and then reinstall Firefox but I can't uninstall it. Nothing happens when I click remove in program access and defaults and the helper.exe file in the firefox uninstall dir doesn't do anything either.

    I want to uninstall and then reinstall Firefox but I can't uninstall it. Nothing happens when I click remove in program access and defaults and the helper.exe file in the firefox uninstall dir doesn't do anything either.

    "program access and defaults" is not the place to remove programs in Windows. You need to go to the control panel and click on Add and Remove programs. For instructions on how to uninstall Firefox, see [[Uninstalling Firefox]]

  • Securing the HR data against unauthorized ABAP program access

    Dears,
    Is there a way to secure HR data against unauthorized user-defined ABAP program access; in other words is there a way to prevent a the HR tables access from within a newly created ABAP program (SELECT statement) ?
    Thanks.
    Reda

    Hi, there's no way to prevent programs from accessing db-tables. Instead, you'll have to limit access on programs.
    Especially, do not allow abap developers to run programs in your productive system. Encourage developers to implement authority-checks in their code. Consider well, who and who not, is to be allowed to run which program.
    regards
    Jörg

  • Fact sheet access problem in EP7.0

    Hi,
    We have moved our content from EP6.0 System to EP7.0 System.  We are on CRM 4.0 AND BW3.5.  After we installed the Business package on EP7.0 System we moved the content.  Every thing is working fine except Fact Sheet.  We are facing access problem for Fact sheet.  I have checked all the items which are given for Default services even then we are getting authorization problem.  Kindly guide me in this regard.
    Thanks
    Naveen

    Resolved

  • JNDI NIS object access problem

    JNDI NIS object access problem:
    Hi all,
    After long fight, i'm now able to connect to my NIS server on my network. the initial context factory is 'com.sun.jndi.nis.NISCtxFactory' and provider url are given and i obtain namingennumeration of items in the NIS directory.
    purpose of my project:
    using ypcat command we can view the services,passwd,host... objects in unix.
    my project requirement is that i shd open this 'services' object in java (using JNDI probably) and shd access its content.
    i'm able to obtain the object and the type of this object is 'NISCtxServices' defined in 'com.sun.jndi.nis.NISCtxFactory' package, but all the classes and methods except some are not public and so im not able to use almost all the methods in this class 'NISCtxServices' .
    Can any one help me in accessing the information inside this object.
    Thanks in advance! and i'm waiting!

    It's because JFrame does not have a public progessbar variable, only your subclass has that.
    //change this
    JFrame frame = new ProgressBarDemo();
    //to this
    ProgressBarDemo frame = new ProgressBarDemo();

  • I want to use Xcode to create an app and i need developer tools. so i need to join the devoper program only problem is I'm not 18

    i want to use Xcode to create an app and i need developer tools. so i need to join the devoper program only problem is I'm not 18

    You can get Xcode without joining the developer program. Just go to the App Store and download it (it's free).
    You'd only need to join the Developer program if you want to put your app into the App Store, this is for OS X.
    You will need to join the Developer program if you want to develop for IOS. In that case you will need a parent or guardian.

  • Which standard SAP programs access parameters maintained in table TVARV?

    Hello,
    There is a table TVARV which contain parameters that are used in several SAP standard programs.  I need to find out which programs access the parameters maintained in table TVARV.  Can anybody tell me how to go about finding which programs access parameters in table TVARV?
    Thank you!

    Hi Rae,
    There is a nice program developed by DYLAN HACK  which is developed to know what jobs are affected by individual TVARV variables.
    Matt, As per the forum rules, I have written the name of the author as well.
    Kindly find the program on below link :-
    [http://searchsap.techtarget.com/tip/0,289483,sid21_gci862489,00.html#]
    Regards
    Abhii
    Edited by: Abhii on Dec 11, 2009 5:20 PM

  • Not enough access problem

    Does anyone know how to fix the not enough access problem that came about after the upgrade?

    Welcome to the discussions,
    see this thread for a possible solution posted by
    iphone3Gguy http://discussions.apple.com/thread.jspa?messageID=10991733&#10991733

  • Write access problem with external Storage Device Connected to macbook

    Hi All,
    I have write access problem ( gives only read-access, but no write access) with an external HDD device (NTFS formatted ) connected to my macbook.
    Could anyone suggest me a file system ( apart from FAT32) which is compatiable with both Mac OS as well windows ;also this file system should allow me to create partitions of size more than 100 GB
    (My external storade devcie capacity is 500 GB )
    Thanks
    Nelson

    Hi Nelson,
    simply said there is no such file system.
    Regardless what you choose, only FAT32 is fully read-/writeable from both Mac OSX and Windows.
    Third-Party helper for access to certain file systems are:
    MacDrive (for Windows using HFS+, the OSX file system)
    MacFuse with 3G (for fully usage of NTFS in OSX)
    Paragon NTFS for OSX (also for fully usage of NTFS in OSX)
    Only MacFuse is freeware, the other two are Commercial apps.
    And just in case you are thinking of any Linux file system, like Ext3 or ReiserFS, you will at least need driver for Windows if not also for OSX (not sure about that).
    Regards
    Stefan

  • TFS 2013: Access problem when adding a AD group to members

    Hi there!
    I have a big access problem. It seems I cant log into TFS if I add a AD group to a collection but I can log in if I add single users from the same group.
    EDIT: The group I want to add is from another domain. Maybe thats the reason for the problem?
    Any ideas? I dont want to add 150 users one by one ;)

    Hi John
    I will try to answer your questions :)
    There’s two domains, TFSdomain and Userdomain, right? - Yes
    The TFSdomain one way trust to Userdomain? - Yes
    If you add a single account(Userdomain) into your TFS Server, this single account(Userdomain) can connect to TFS Web Access or your account can connect to TFS Web Access? Your account and this single account(Userdomain) are not the same account? -
    I have two accounts, one User domain accout and one TFS domain account that is TFS administrator. If I use the TFS domain account to add the User domain account as a project group member this user domain account will be able to access the TFS web access
    from the user domain.
    If you add an AD group(Userdomain) into your TFS Server, the user in this AD group(Userdomain) will cannot access TFS Web Access or your account cannot access TFS Web Access? Your account and this user are the same account? Or your account included in this
    AD group(Userdomain) too? - The user domain:s "domain users" group includes my user domain account. If I add the user domain:s "domain users" group as a project group member in TFS (with my domain user) my user domain account will
    not be able to access the TFS web access from the user domain.
    When connect to TFS Web Access failed, what’s the error message you received? - There is no error message, I am only asked to log in again.
    If you cannot access TFS Web Access, how did you add AD group(Userdomain) into your TFS Server? Or once you added the AD group(Userdomain) into TFS Server, you will cannot access TFS Web Access immediately? Your account is a Userdomain user? -
    I added it with my TFS user domain administer account
    The scenario is as follows:
    I have a one way trust from tfs domain to user domain.
    I add a user domain account as a project group member in TFS. Now this account is granted access to the project using the TFS web access client.
    I remove the user again.
    I add the users domain:s "domain users" group (where my user domain account is included) as a project group member in TFS. Now my user account is
    not granted access to the project using the TFS web access client.
    Hope this will spread some light on the problem.
    Thanks Stefan

Maybe you are looking for

  • Not able to edit the value options in LKM

    Hi I have recently upgraded to ODI 11g . In that we are not able to edit the value options in LKM. (i.e.. editor window is not appearing, not able to edit the text. Please let me know the solution . Thanks

  • How can I deploy a .pkg file that requires a folder with customizations?

    I am attempting to deploy a pkg file with ARD.  The customizations for this pkg are stored in a folder called custom.  If the PKG and Custom folder are in the same directory the Pacage will apply those customizations.  What would be the best way to a

  • Native Toplink to EclipseLink to JPA - Migration Best Practice

    I am currently looking at the future technical stack of our developments, and would appreciate any advise concerning best practice migration paths. Our current platform is as follows: Oracle 10g AS -> Toplink 10g -> Spring 2.5.x We have (approx.) 100

  • Maintain Folder Opened

    Hello everyone, I have 3 applications in 3 different IViews, corresponding to 3 pages ("Program1" to "Program3"). All pages are inserted in a folder "Applications". This folder is then linked to a Workset. My problem is that, when i open the portal,

  • Resizing controls in top level VI

    In the LabVIEW8 version of the TestStand3.5 OI, in the Top-Level VI, there is a call to FULL OI - Resize Controls.vi.  If I (at the top-level VI) set the VI properties in Window Appearance::customize:: and uncheck the show vertical/horizontal scrollb