Gnome - Separate X Screens and and application launching

After the update to gnome 2.26.0, i've got a problem with my screen configuration. I use two screens with separate X sessions, but every time i try to launch an application from the second screen, it appears into the first.
If i launch from the first screen a command like:
firefox --display :0,1
I can see firefox on the second monitor, but if i launch firefox from the menu of the second monitor, firefox appear into the first one.
Anyone has an idea ?

marcs wrote:
After the update to gnome 2.26.0, i've got a problem with my screen configuration. I use two screens with separate X sessions, but every time i try to launch an application from the second screen, it appears into the first.
If i launch from the first screen a command like:
firefox --display :0,1
I can see firefox on the second monitor, but if i launch firefox from the menu of the second monitor, firefox appear into the first one.
Anyone has an idea ?
It would be easier to help you if you didn't distract everyone trying to read your post with a stupid dancing bear gif.

Similar Messages

Simple installation and application launching

Is anyone else wondering about this too?
(I'm referring to pdas running variants of windows.)
User finds an application on a web page.
User does not know or care that it is a Java application.
User clicks on 'download' button.
Simple, straightforward click-through.
Application becomes visible in 'My Programs'.
Click once and the application launches.
The user can be assumed to have the ability to download and double click on a .exe (not .jar), or download and copy to a given location. Any such file, must be singular.
The jvm must be bundled. It's installation must be transparent. Ideally it should not be seen by the pda as a separate application.
Does anyone know how to do this? HInts? Recipes?
I don't care how tediuous or hacky this is. Only that the end user experience is the same as it would be for a windows native app.
I very much like Mysaifu. I'd use j9 if neccesary. Sadly there are no other jvms that aren't seriously flawed.

Ok, here's a supplementary question.. Why has noone replied to this thread? Am I asking the impossible? Is it too obvious? Was that the red pill, or the blue pill? :-s

Black screen and applications problem on iPhone 4S after upgrading to iOS6

I've upgraded my iphone 4s to the iOS6, all the applications suddenly stops while I am working on it, then the phone shows a black screen and after some seconds shows the main menu screen. When I open the application again after that, things I was doing were lost. Even if I am making a call, the black screen appears, the call is muted to me for a while until when the phone shows me the main screen again and I have to tap to the call. If I am playing music, suddenly the phone shows the black screen and stops the playback, after of it, I try to recover my playback but there is no playback. And happens with everything: facebook, mails, sms, maps, among others. When I was using the iOS 5.1.1. phone was working well.

i looked on the right there is no solution to my problem.i charge my phone to 100% after 2 hours with no usage at all of the phone with 3G off with wifi off with all applications shut down all notifications and locations off battery goes down to 50% when it was running on the older ios never had this problem in my iphone.when will this problem solved

Is there any way to fill long loading gap between splash screen and application home page?

Recently I have developed my first MAF app. This app is with basic design with some page re-directions, no web services/java script is used but when I start app first time then there is a long white gap after splash screen till loading application home page. Is there any way to eliminate this gap?

User, tell us your jdev version, please!
Check the hints given in this thread Increase Adf Application Load Time
When a page loads all iterators are executed whihc can take some time if you have many of them on the page retrieving many rows. So what is on your home page?
Timo

PWB- Connection between selection screen and Application Form

Hi Experts,
I need your help regarding PWB.
My requirement is, I need to fetch date and amount placed on selection screen into application form and those values I need to print through pwb using SAPScript.
I am new to PWB so not getting how exactly I need to do this. Please help me on this.
Thanks in advance.
Regards,
Abhijeet

Hi,
Write LEAVE TO SCREEN 0 in the PAI of screen 500.
MODULE user_command_0500 INPUT.
CASE g_ok_code.
    WHEN 'BACK' OR 'EXIT'.
    Goto Selection screen
      LEAVE TO SCREEN 0.
    WHEN 'CANC' .
      LEAVE PROGRAM.
    WHEN OTHERS.
    Do Nothing
ENDCASE.
CLEAR : g_ok_code.
ENDMODULE.

TV channel and application launching

Hello to everybody,
Does anybody know if it is possible to launch an xlet without the need of beeing previously broadcasted? I mean, Is it necessary having the broadcaster figure to run a MHP application in a real environment?
What I am talking about is the possibility of running xlet in a STB as if I have PC application. Is it possible?
Thank-you everybody
Juanpa

Built-in applications are supported by MHP (e.g. an MHP application that is put in to the box by the STB vendor). These can appear just like any other MHP application, although how you launch them is defined by the STB vendor - maybe through the same mechanism that you use for launching other (broadcast) applications, maybe not.
MHP 1.1. does add support for storing applications on the receiver, but these must still be signalled in the broadcast stream and will usually be downloaded from the broadcast stream as well (downloading them over the return channel is possible, but I'm not sure how widely supported it would be).
In theory, it would be possible to build a service that lets you download and store applications on your STB, but there are a number of things that make this impractical. Stored applications in MHP are normally intended to be used as a way of caching files to improve startup times, and so an application may get automatically deleted when the receiver needs more space. There is also the problem that stored applications may conflict with broadcast apps, and so there is the potential for a lot of interoperability problems. Finally, there is the basic problem that MHP 1.1 is not deployed anywhere at the moment, and there does not appear to be any major push towards launching it.
Generally, there is no way of instaling or running an Xlet on your set-top box that does not rely on the broadcaster or the STB manufacturer (development systems are an obvious exception to this, and I'm not considering from the for now). Consumers downloading MHP xlets from a web site and installing them on their STB is not going to happen in the forseeable future.
Steve.

My computer screen and applications look like an xray

my 2 year old daughter was pushing some keys and somehow changed my entire computers appearance. The desktop picture looks like an xray or a picture negative. All the applications are black and brown with the typed words in white. I have spent three days trying to change it back, does anyone know how to correct this problem?
G5 Mac OS X (10.4.5)

Glad it worked,
Miriam
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

Mobile website and application launch unwanted

Hello,
When I access my mobile website, I have a message redirecting me to the store Windows Phone (see screenshot below).
Android and iOS, I do not encounter this problem.
Can you help me please?
PS : I cannot upload the screenshot, I have this message :
Body text cannot contain images or links until we are able to verify your account.

The only advice I can give is to try a different browser for that site
http://www.wpcentral.com/bored-internet-explorer-here-are-some-alternative-web-browsers-windows-phone
Chrome for Windows Phone may be available soon.
http://www.omgchrome.com/google-chrome-windows-phone-8-1/
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

How do i insert a splash screen or a loading screen and a application image for a phone app on Dream

How do i insert a splash screen or a loading screen and a application image for a phone app on Dreamweaver 6, 5.5 had the mobile application setting that is seemingly no longer present? and i also heard you can use animanted backgrounds on the mobile application in dreamweaver 6 but figuring out how to set the splash screen and application image like it was in 5.5 would be nice. All i can get to pull up is the web application i developed i am trying to build into a phone app on google chrome, if i could officially designate it as a phone app where i can set each splash screen and app image to where it is recognized as a phone app that would be really nice.

Duely noted, the server will still not connect, so i have left an inquery in the suggested forum.
Date: Mon, 15 Oct 2012 07:37:34 -0600
From: [email protected]
To: [email protected]
Subject: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
    Re: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
    created by David_Powers in Developing server-side applications in Dreamweaver - View the full discussion
jmed0411 wrote: the phonegap program loads for quite some time and eventually reaches to the unfortunate conclusion that the server cannot be reached and to please try again. Any ideas on how that problem can be mended if the solution is in my hands?? I haven't used PhoneGap Build recently, but I have seen several reports about problems connecting to the server. One suggestion that I've heard is that there has been unexpectedly high demand on the server since the launch of Edge Tools and Services as part of the Creative Cloud last month. As far as I know, the only thing you can do is wait, and try again later. You could also try posting in the PhoneGap Build forum: http://community.phonegap.com/nitobi/products/nitobi_phonegap_build.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4774799#4774799
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4774799#4774799
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4774799#4774799. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Developing server-side applications in Dreamweaver by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

[SOLVED] Have flash fullscreen not exit on separate x screen?

Is there a way I can have flash running fullscreen on my second monitor (running a separate x screen) and be able to click/use my other x screen?
edit: found this and it works http://www.ubunturoot.com/2011/07/fulls … -dual.html
Last edited by boast (2012-08-14 23:13:47)

work well but not with pepper flash

How do I make a window full screen and keep my connected monitor separate to utilize with other programs?

I just got a MacBookPro and have an external monitor connected to it. I opened a window to full screen and the connected monitor went to a gray screen while the MBP monitor showed the program in full screen. How can I make them independant so this doesn't happen?

Hello Azul37,
go to your Applications folder and ctrl-click iDVD, then choose "Show Package Contents" from the drop-down menu. Next navigate to the Resources folder, find the theme, duplicate and rename it, then open the copy with the above procedure (choose Full Frame 1 for this - the other one is a bit tricky)
Again navigate to the Resources folder and find a folder named "FullFrameTitle.pox". There are other folders inside - open them one by one until you find a TIFF file with a long name with loads of numbers and delete it. Now the grey bar for the title is gone.
Next launch iDVD and choose your (modified) theme. Import a movie. You'll see the grey bar appear as button under the text. Go to the Settings tab in the Customize pane, select the button options and choose "Text Only". Voilà
Note: I recommend you leave the grey bar for the buttons - it provides better on-screen visibility.
If you are interested in tweaking your iDVD themes I recommend reading here:
Dave Nagel's tutorial about custom buttons
http://www.creativemac.com/articles/viewarticle.jsp?id=31388
Creating custom dropzones by Dave Nagel
http://www.corporatemedianews.com/articles/viewarticle.jsp?id=32445
hope this helps
mish

Application Launch Failure (Excel, Word and some other programs)

Error message on the screen:
Application Launch Failure
The application "Word" could not be launched because of a shared Library error: "<Microsoft Word><Microsoft Word><CarbonLib>"
Console Message:
10/10/09 9:21:15 PM [0x0-0xd40d4].com.microsoft.Word[1477] /Applications/Microsoft Office 2004/Microsoft Word[1477] Launch failed with error code -2804 (cfragNoLibraryErr) for application /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp
10/10/09 9:21:15 PM com.apple.launchd[1334] ([0x0-0xd40d4].com.microsoft.Word[1477]) Exited with exit code: 12
This also happens with Excel, Word and some other programs.
Anyone have any ideas?

Oops, I should have mentioned that I've repaired permissions both from a DVD bootup as well as from the current hard drive. I reinstalled the last update.
I have Time Machine so I guess I could go back to a previous state if I knew what the problem was.

The application does not use the screen and run in the background

Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
    private SSGameCanvas gameCanvas ;
    private Command exitCommand ;
    private Player player = null;
    public void startApp() {
try {
       //   create new game thread
          gameCanvas = new SSGameCanvas();
          gameCanvas.start(); // start game thread
          exitCommand = new Command("Exit",Command.EXIT,1);
          gameCanvas.addCommand(exitCommand);
          gameCanvas.setCommandListener(this);
            Display.getDisplay(this).setCurrent(gameCanvas);
   catch (java.io.IOException e)
            e.printStackTrace();
        try {
            // start sounds
            InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
            player = Manager.createPlayer(in,"audio/x-wav");
            player.setLoopCount(1);
            player.start();
        catch (MediaException ex)
            ex.printStackTrace();
         catch (IOException ex)
            ex.printStackTrace();
    public void pauseApp() {
    public void destroyApp(boolean unconditional) {
        if (player != null) {
            player.close();
        System.gc();
public void commandAction(Command command, Displayable displayable) {
       if (command == exitCommand)
             destroyApp(true);
             notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
    protected GameManager gameManager;
    protected boolean running;
    private int tick=0;
    private static int WIDTH;
    private static int HEIGHT;
    private int mDelay = 20;
    Form mainForm;
    Display display;
    //private int MaxTime;
    public SSGameCanvas() throws IOException{
        super(true);
        gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
    public void start() {
            this.running = true;
            Thread t = new Thread(this);
            t.start();
    public void stop() {
        running = false;
    public void render(Graphics g) {
        WIDTH = getWidth();
        HEIGHT = getHeight();
        // Clear the Canvas.
        g.setColor(0, 0, 50);
        g.fillRect(0,0,WIDTH-1,HEIGHT-1);
        // draw border
        g.setColor(200,0,0);
        g.drawRect(0,0,WIDTH-1,HEIGHT-1);
        // draw game canvas
        gameManager.paint(g);
    public void run() {
        while (running) {
            // draw graphics
            render(getGraphics());
            // advance to next graphics
            advance(tick++);
            // display
            flushGraphics();
            try { Thread.sleep(mDelay); }
            catch (InterruptedException ie) {}
    public void advance(int ticks) {
        // advance to next game canvas
        gameManager.advance(ticks);
        this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PM

Hi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj

The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes

The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes.

Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

My husband and I share one computer. We want to be able to share the same music on our iPhones, but we don't want to share the same contacts and applications. How can I set this up so we still share music, but everything else is separate on our iPhones?

My husband and I share one computer. We want to be able to share the same music on our iPhones, but we don't want to share the same contacts and applications. How can I set this up so we still share music, but everything else is separate on our iPhones?

Welcome to the Apple Community.
iTunes and iCloud are different accounts. You can both use the same ID for the store login and share your music etc., and use different ID's to log in to iCloud, thereby keeping your calendars etc separate.

Gnome - Separate X Screens and and application launching

Similar Messages

Maybe you are looking for