Gnome terminal suddenly fails to start
My laptop died because the battery failed, as a result, after rebooting, gnome-terminal fails to start with:
(process:3967): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
(gnome-terminal:3967): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2:19: Theming engine 'adwaita' not found
(gnome-terminal:3967): Gtk-WARNING **: Theme parsing error: gtk-main.css:168:30: Failed to import: Error opening file: No such file or directory
Error constructing proxy for org.gnome.Terminal:/org/gnome/Terminal/Factory0: Error calling StartServiceByName for org.gnome.Terminal: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process org.gnome.Terminal exited with status 8
I couldn't find anything on status 8..:-/
Make sure your locale is set correctly, and that you have uncommented your relevant UTF-8 language.
See here: https://wiki.archlinux.org/index.php/Be … ide#Locale
Then try rebooting.
gnome-terminal 3.14.x requires a unicode locale to work, with some luck the other warnings should also disappear.
Similar Messages
-
Out of the box approval workflow suddenly failed on start (retrying)
SharePoint 2010. I've been using out of the box approval workflow for several month now. I did some minor changes to it, like to who and when emails should be send, but that's all.
Then out of a sudden it stopped working. New request status is "Failed on start (retrying)". Sometimes (!) status is "In Progress", but no tasks are created. In both cases there is nothing on workflow history and error report is also empty
(it even cause an error "Report contains no data").
I'm sure that I didn't change anything in a workflow. The only think that I changed was an InfoPath form, but I only added there field "Created By", so I would see in calendar later who created this request. I couldn't see how this might affect workflow
process.
I'm confused as I don't even know where to start searching for the solution. Why this might happen? Any ideas are very welcome!In my list I have a multiple choice field which is not required. When it was
blank my workflow was failing on start! This field was not involved in a workflow directly, I included it only in the email to approver. When I deleted it from an email everything was fine. -
Weblogic 8.1 suddenly failing to start at the 1536MB level
We are running WebLogic Server 8.1 SP5 on Windows Server 2003 SP2. We have been running weblogic for a long time with a memory allocation of 1.5GB (1536MB). But all of a sudden, it wouldn't start giving the following error.
"Error occured during initialization of VM. Could not reserve enough space for object heap"
But if I drop the startup memory parameter to "-Xms968m -Xmx968m" it comes up successfully. Basically I tried through different numbers and then found out that it craps out beyond the 968MB level. As you can see below the server has enough memory. Does anybody have a solution to this?
Server and startup configurations are below:
WebLogic Server 8.1 SP5
Windows Server 2003 SP2
Server memory - 3GB
Server virtual memory - 2GB
running on vmware ESX
weblogic gets started through Windows services with the following startup parameters:
-server -Xms1536m -Xmx1536m -XX:MaxPermSize=128m -XX:NewSize=128m -XX:MaxNewSize=128m -XX:SurvivorRatio=4 -verbosegc -XX:+PrintGCDetails -classpath "........."
-Dweblogic.Name=myserver -Dweblogic.management.username= -Dweblogic.ProductionModeEnabled= -Djava.security.policy="C:\bea\WEBLOG~1\server\lib\weblogic.policy" weblogic.ServerDoes Window Task manger report enough available physical memory before you attempt to start server ?
jayesh@yagna -
GNOME Fails to start - Polkit? Main.js? - Receive 'Oops' message.
Been using Arch for years but this is my first problem surprisingly so posting it in this Newbies section.
I have MATE, KDE, and FLUXBOX working fine as desktop environments for years. Thought I would give GNOME a try and no matter what I've tried I cannot get it working. All I get is a sad face with an 'OOPS' message on screen. Although I am prompted to enter my WiFi password presumably from NetworkManager. None of the errors listed below turn up much on Google so I thought I'd turn to the community. Any help getting GNOME working correctly would be very much appreciated.
-- Logs begin at Mon 2014-06-09 18:04:18 BST. --
Jan 19 14:26:50 glow lightdm[1574]: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)
Jan 19 14:26:50 glow systemd-logind[432]: New session c4 of user lightdm.
Jan 19 14:26:50 glow org.a11y.Bus[1582]: Activating service name='org.a11y.atspi.Registry'
Jan 19 14:26:50 glow org.a11y.Bus[1582]: Successfully activated service 'org.a11y.atspi.Registry'
Jan 19 14:26:50 glow org.a11y.atspi.Registry[1588]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jan 19 14:26:50 glow systemd-logind[432]: Removed session c1.
Jan 19 14:26:51 glow NetworkManager[422]: <warn> Could not get scan request result: Scan request rejected
Jan 19 14:26:59 glow login[1524]: pam_unix(login:session): session opened for user cellardoor by LOGIN(uid=0)
Jan 19 14:26:59 glow systemd-logind[432]: New session c5 of user cellardoor.
Jan 19 14:26:59 glow login[1524]: LOGIN ON tty3 BY cellardoor
Jan 19 14:27:16 glow org.a11y.Bus[1718]: Activating service name='org.a11y.atspi.Registry'
Jan 19 14:27:16 glow org.a11y.Bus[1718]: Successfully activated service 'org.a11y.atspi.Registry'
Jan 19 14:27:16 glow org.a11y.atspi.Registry[1725]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jan 19 14:27:16 glow gnome-keyring-daemon[1735]: couldn't access control socket: /run/user/1000/keyring/control: No such file or directory
Jan 19 14:27:16 glow gnome-session[1714]: ** Message: couldn't access control socket: /run/user/1000/keyring/control: No such file or directory
Jan 19 14:27:16 glow gnome-session[1714]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
Jan 19 14:27:16 glow gnome-session[1714]: GPG_AGENT_INFO=/run/user/1000/keyring/gpg:0:1
Jan 19 14:27:16 glow gnome-session[1714]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
Jan 19 14:27:16 glow rtkit-daemon[833]: Successfully made thread 1753 of process 1753 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jan 19 14:27:16 glow rtkit-daemon[833]: Supervising 2 threads of 2 processes of 1 users.
Jan 19 14:27:16 glow pulseaudio[1753]: Daemon already running.
Jan 19 14:27:16 glow dbus[425]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
Jan 19 14:27:16 glow dbus[425]: [system] Successfully activated service 'org.freedesktop.hostname1'
Jan 19 14:27:16 glow dbus[425]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service'
Jan 19 14:27:16 glow dbus[425]: [system] Successfully activated service 'org.freedesktop.locale1'
Jan 19 14:27:16 glow gnome-session[1714]: (gnome-shell:1773): Gjs-WARNING **: JS ERROR: Error: Requiring Polkit, version none: Typelib file for namespace 'Polkit' (any version) not found
Jan 19 14:27:16 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/endSessionDialog.js:28
Jan 19 14:27:16 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/main.js:15
Jan 19 14:27:16 glow gnome-session[1714]: @<main>:1
Jan 19 14:27:16 glow gnome-session[1714]: ** Message: Execution of main.js threw exception: JS_EvaluateScript() failed
Jan 19 14:27:16 glow gnome-session[1714]: gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
Jan 19 14:27:16 glow gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
Jan 19 14:27:17 glow gnome-session[1714]: (gnome-shell:1790): Gjs-WARNING **: JS ERROR: Error: Requiring Polkit, version none: Typelib file for namespace 'Polkit' (any version) not found
Jan 19 14:27:17 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/endSessionDialog.js:28
Jan 19 14:27:17 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/main.js:15
Jan 19 14:27:17 glow gnome-session[1714]: @<main>:1
Jan 19 14:27:17 glow gnome-session[1714]: ** Message: Execution of main.js threw exception: JS_EvaluateScript() failed
Jan 19 14:27:17 glow gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
Jan 19 14:27:17 glow gnome-session[1714]: WARNING: App 'gnome-shell.desktop' respawning too quickly
Jan 19 14:27:17 glow gnome-session[1714]: gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
Jan 19 14:27:17 glow gnome-session[1714]: gnome-session[1714]: WARNING: App 'gnome-shell.desktop' respawning too quickly
Jan 19 14:27:17 glow gnome-session[1714]: Unrecoverable failure in required component gnome-shell.desktop
Jan 19 14:27:17 glow fingerprint-polkit-agent[1806]: Got "debug" argument.
Jan 19 14:27:17 glow fingerprint-polkit-agent[1806]: started.
Jan 19 14:27:17 glow gnome-session[1714]: (uint32 1,)
Jan 19 14:27:17 glow gnome-session[1714]: Entering running state
Jan 19 14:27:17 glow gnome-session[1714]: Failed to play sound: File or data not found
Jan 19 14:27:17 glow gnome-session[1714]: New PolkitAgentListener 0xb637a0
Jan 19 14:27:17 glow gnome-session[1714]: Adding new listener PolkitQt1::Agent::Listener(0x7fff29d587e0) for 0xb637a0
Jan 19 14:27:17 glow org.gnome.zeitgeist.Engine[1718]: ** (zeitgeist-datahub:1857): WARNING **: zeitgeist-datahub.vala:226: Unable to get name "org.gnome.zeitgeist.datahub" on the bus!
Jan 19 14:27:17 glow polkitd[433]: Registered Authentication Agent for unix-session:c5 (system bus name :1.90 [/usr/lib/fingerprint-gui/fingerprint-polkit-agent -d], object path /fingerprintgui/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
Jan 19 14:27:17 glow fingerprint-polkit-agent[1806]: Listener "/fingerprintgui/PolicyKit1/AuthenticationAgent" registered.
Jan 19 14:27:17 glow NetworkManager[422]: <info> Auto-activating connection 'The Promised LAN'.
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) starting connection 'The Promised LAN'
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) started...
Jan 19 14:27:17 glow NetworkManager[422]: <info> (wlp3s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) scheduled...
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) complete.
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) starting...
Jan 19 14:27:17 glow NetworkManager[422]: <info> (wlp3s0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0/wireless): access point 'The Promised LAN' has security, but secrets are required.
Jan 19 14:27:17 glow NetworkManager[422]: <info> (wlp3s0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) complete.
Jan 19 14:27:17 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): tumbler-WARNING **: Failed to load plugin "tumbler-raw-thumbnailer.so": libopenrawgnome.so.1: cannot open shared object file: No such file or directory
Jan 19 14:27:17 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): tumbler-WARNING **: Failed to load plugin "tumbler-ffmpeg-thumbnailer.so": libffmpegthumbnailer.so.4: cannot open shared object file: No such file or directory
Jan 19 14:27:17 glow gnome-session[1714]: Traceback (most recent call last):
Jan 19 14:27:17 glow gnome-session[1714]: File "<frozen importlib._bootstrap>", line 2158, in _find_spec
Jan 19 14:27:17 glow gnome-session[1714]: AttributeError: 'DynamicImporter' object has no attribute 'find_spec'
Jan 19 14:27:17 glow gnome-session[1714]: During handling of the above exception, another exception occurred:
Jan 19 14:27:17 glow gnome-session[1714]: Traceback (most recent call last):
Jan 19 14:27:17 glow gnome-session[1714]: File "/usr/share/system-config-printer/applet.py", line 45, in <module>
Jan 19 14:27:17 glow gnome-session[1714]: from gi.repository import Notify
Jan 19 14:27:17 glow gnome-session[1714]: File "/usr/lib/python3.4/site-packages/gi/importer.py", line 53, in find_module
Jan 19 14:27:17 glow gnome-session[1714]: 'introspection typelib not found' % namespace)
Jan 19 14:27:17 glow gnome-session[1714]: ImportError: cannot import name Notify, introspection typelib not found
Jan 19 14:27:17 glow gnome-session[1714]: (nm-applet:1810): libnm-glib-CRITICAL **: nm_secret_agent_register: assertion 'priv->registered == FALSE' failed
Jan 19 14:27:17 glow gnome-session[1714]: nm-applet-Message: No keyring secrets found for The Promised LAN/802-11-wireless-security; asking user.
Jan 19 14:27:17 glow gnome-session[1714]: (gnome-settings-daemon:1742): GLib-GIO-CRITICAL **: g_dbus_proxy_call_internal: assertion 'G_IS_DBUS_PROXY (proxy)' failed
Jan 19 14:27:17 glow gnome-session[1714]: (gnome-settings-daemon:1742): GLib-GIO-CRITICAL **: g_dbus_proxy_call_internal: assertion 'G_IS_DBUS_PROXY (proxy)' failed
Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Call to gst_discoverer_discover_uri() failed: GStreamer encountered a general stream error.
Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/test.webm' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/test.webm' and mime:'video/webm'
Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Failed to open file: No OLE2 signature
Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/samsungkeyforserver.pub' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/samsungkeyforserver.pub' and mime:'application/vnd.ms-publisher'
Jan 19 14:27:18 glow org.gnome.OnlineAccounts[1718]: goa-daemon-Message: goa-daemon version 3.14.2 starting
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): tumbler-WARNING **: Failed to load plugin "tumbler-raw-thumbnailer.so": libopenrawgnome.so.1: cannot open shared object file: No such file or directory
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): tumbler-WARNING **: Failed to load plugin "tumbler-ffmpeg-thumbnailer.so": libffmpegthumbnailer.so.4: cannot open shared object file: No such file or directory
Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Couldn't create PopplerDocument from uri:'file:///home/cellardoor/Documents/Holiday/certificate_flight_plus_2_a.pdf', PDF document is damaged
Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/Documents/Holiday/certificate_flight_plus_2_a.pdf' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/Documents/Holiday/certificate_flight_plus_2_a.pdf' and mime:'application/pdf'
Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Call to gst_discoverer_discover_uri() failed: Your GStreamer installation is missing a plug-in.
Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/Documents/Java/Assignment3/evidence%20of%20testing%20and%20results%20not%20as%20expected.xcf' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/Documents/Java/Assignment3/evidence%20of%20testing%20and%20results%20not%20as%20expected.xcf' and mime:'image/x-xcf'
Jan 19 14:27:18 glow gnome-session[1714]: Destroying listener
Jan 19 14:27:18 glow gnome-session[1714]: Removing listener PolkitQt1::Agent::Listener(0x7fff29d587e0)
Jan 19 14:27:18 glow polkitd[433]: Unregistered Authentication Agent for unix-session:c5 (system bus name :1.90, object path /fingerprintgui/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
Jan 19 14:27:18 glow NetworkManager[422]: <warn> No agents were available for this request.
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 19 14:27:18 glow NetworkManager[422]: <warn> Activation (wlp3s0) failed for connection 'The Promised LAN'
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): deactivating device (reason 'none') [0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> Auto-activating connection 'Security'.
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) starting connection 'Security'
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) started...
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) scheduled...
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) complete.
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) starting...
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0/wireless): access point 'Security' has security, but secrets are required.
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) complete.
Jan 19 14:27:18 glow NetworkManager[422]: <warn> No agents were available for this request.
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 19 14:27:18 glow NetworkManager[422]: <warn> Activation (wlp3s0) failed for connection 'Security'
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): deactivating device (reason 'none') [0]
Jan 19 14:27:18 glow kernel: tracker-miner-f[1827]: segfault at 130000017a ip 00007f14f57cbdbe sp 00007ffff6a89330 error 4 in libgio-2.0.so.0.4200.1[7f14f5779000+16f000]
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.UDisks2VolumeMonitor disconnected from the bus; removing drives/volumes/mounts
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.MTPVolumeMonitor disconnected from the bus; removing drives/volumes/mounts
Jan 19 14:27:18 glow NetworkManager[422]: <warn> Could not get scan request result: Scan request rejected
Jan 19 14:27:18 glow org.a11y.Bus[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow gnome-session[1714]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:15->'Terminated'
Jan 19 14:27:18 glow org.gtk.vfs.Daemon[1718]: A connection to the bus can't be made
Jan 19 14:27:18 glow org.gtk.vfs.Daemon[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.freedesktop.Tracker1[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gtk.vfs.Daemon[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gnome.OnlineAccounts[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gtk.Private.UDisks2VolumeMonitor[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gtk.Private.MTPVolumeMonitor[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gnome.evolution.dataserver.Sources3[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gnome.zeitgeist.Engine[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.freedesktop.Tracker1[1718]: Received signal:15->'Terminated'
Jan 19 14:27:18 glow org.freedesktop.Tracker1[1718]: OK
Jan 19 14:27:18 glow ca.desrt.dconf[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow gnome-session[1714]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gnome.zeitgeist.Engine[1718]: [14:27:18.337568 WARNING] zeitgeist-daemon.vala:449: The connection is closed
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:15->'Terminated'
Jan 19 14:27:18 glow gnome-session[1714]: OK
Jan 19 14:27:18 glow org.freedesktop.Telepathy.AccountManager[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gnome.evolution.dataserver.Calendar4[1718]: Could not connect: Connection refused
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: Error creating proxy: The connection is closed (g-io-error-quark, 18)
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: Error creating proxy: Error calling StartServiceByName for org.gtk.Private.MTPVolumeMonitor: The connection is closed (g-io-error-quark, 18)
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: Error creating proxy: Error calling StartServiceByName for org.gtk.vfs.Daemon: The connection is closed (g-io-error-quark, 18)
Jan 19 14:27:18 glow gnome-session[1714]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:15->'Terminated'
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): tumblerd-WARNING **: Failed to start the thumbnail cache service: Another thumbnail cache service is already running
Jan 19 14:27:18 glow gnome-session[1714]: OK
Jan 19 14:27:18 glow systemd-coredump[1943]: Process 1827 (tracker-miner-f) of user 1000 dumped core.
Thank you!
Moderator edit: Added code tags
Last edited by ewaller (2015-01-19 15:57:10)Please use code tags when posting logs. From
Jan 19 14:27:16 glow gnome-session[1714]: ** Message: couldn't access control socket: /run/user/1000/keyring/control: No such file or directory
Jan 19 14:27:16 glow gnome-session[1714]: (gnome-shell:1773): Gjs-WARNING **: JS ERROR: Error: Requiring Polkit, version none: Typelib file for namespace 'Polkit' (any version) not found
it seems you're missing dependencies, or they're not started for some reason. Try running GNOME via GDM, installing latter should pull in the full kitchen sink. If you want more hints, google for "gjs polkit not found".
Last edited by Alad (2015-01-19 15:38:09) -
[SOLVED] gnome-terminal won't start
Well, first of all good day and thanks in advance.
gnome-terminal is not launching. I get:
ERROR:terminal-app.c:1433:terminal_app_init: assertion failed: (app->system_font_desc != NULL)
This started with no particular trigger, and now i am using aterm, but i like better gnome-terminal, so any help would be appreciated.
Last edited by evildrake (2009-07-24 16:37:48)Seems like a font issue, try this:
gnome-terminal --tab-with-profile=Default
Else you can try editing the settings using gconf-editor. -
Cannot start xconsole or gnome-terminal after update
I use fluxbox, and I have gnome-terminal bound to a keyboard shortcut as well as a menu item. However, since upgrading to GNOME 2.26, gnome-terminal would not start. There is no visual indication of failure; the window just doesn't show up.
I also tried xconsole (by adding xconsole to the menu through TTY), and I get a message saying simply that "couldn't open console"
I read something about the permissions of /dev/console not being set probably, and that commenting out lines in /etc/fbtab would help, but no such table file exists on my system.
Thanks in advance for your help.I am not sure whether the following patch makes sense but it fixes aforementioned problems with gnome-terminal.
By following the suggestion from http://bugzilla.gnome.org/show_bug.cgi?id=564649 I have created the following patch:
--- src/terminal.c 2009-03-30 18:17:08.000000000 +0100
+++ src/terminal.c 2009-05-09 21:14:25.129888742 +0100
@@ -448,11 +448,11 @@
* session bus running), we'd crash later on. Tell the user about it
* now, and exit. See bug #561663.
- if (!gconf_ping_daemon ())
- g_printerr ("Failed to contact the GConf daemon; exiting.\n");
- exit (1);
+/* if (!gconf_ping_daemon ()) */
+/* { */
+/* g_printerr ("Failed to contact the GConf daemon; exiting.\n"); */
+/* exit (1); */
+/* } */
gtk_window_set_default_icon_name (GNOME_TERMINAL_ICON_NAME);
and modified the PKGBUILD:
# $Id$
# Maintainer: Jan de Groot <[email protected]>
pkgname=gnome-terminal
pkgver=2.26.1
pkgrel=1
pkgdesc="The GNOME Terminal Emulator"
arch=(i686 x86_64)
license=('GPL')
depends=('gconf>=2.26.0-2' 'vte>=0.20.1' 'startup-notification>=0.9')
makedepends=('pkgconfig' 'gnome-doc-utils>=0.16.0' 'intltool')
options=('!emptydirs')
url="http://www.gnome.org"
groups=('gnome-extra')
install=gnome-terminal.install
source=(http://ftp.gnome.org/pub/gnome/sources/${pkgname}/2.26/${pkgname}-${pkgver}.tar.bz2 ${pkgname}-${pkgver}.patch)
md5sums=('49acf3da4c820249b763d636f27e3a46' '0862775e42f767b9dc4a1f59bbd9e527')
build() {
cd "${srcdir}/${pkgname}-${pkgver}"
patch -p0 < ${startdir}/${pkgname}-${pkgver}.patch
./configure --prefix=/usr --sysconfdir=/etc \
--localstatedir=/var --disable-scrollkeeper || return 1
make || return 1
make GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1 DESTDIR="${pkgdir}" install || return 1
install -m755 -d "${pkgdir}/usr/share/gconf/schemas"
gconf-merge-schema "${pkgdir}/usr/share/gconf/schemas/${pkgname}.schemas" --domain gnome-terminal ${pkgdir}/etc/gconf/schemas/*.schemas || return 1
rm -f ${pkgdir}/etc/gconf/schemas/*.schemas
I installed modified gnome-terminal and works like a charm as a standalone application in my xmonad window manager session without tweaking env vars, gconf, dbus or gnome-settings-daemon.
Cheers, George -
[Solved] Gnome-terminal does not start (fresh install)
Whenever I install gnome-terminal, I have the following message displayed:
(gconftool-2:28984): GConf-WARNING **: Client failed to connect to the D-BUS daemon:/usr/bin/dbus-launch terminated abnormally without any error message
Then whenever I launch gnome-terminal I have this message:
** (gnome-terminal:1102): CRITICAL **: atk_bridge_adaptor_cleanup: assertion `inited' failed
The problem seems to be related to dbus. I have even tried guake which complains explicitly about "No D-BUS daemon running".
Systemctl is telling me that d-bus is up and running.
Any help appreciated.
Info:
- Linux arch64-vbox 3.6.9-1-ARCH #1 SMP PREEMPT Tue Dec 4 08:04:10 CET 2012 x86_64 GNU/Linux
- systemctl --all | grep error
auditd.service error inactive dead auditd.service
display-manager.service error inactive dead display-manager.service
plymouth-quit-wait.service error inactive dead plymouth-quit-wait.service
plymouth-start.service error inactive dead plymouth-start.service
rc-local.service error inactive dead rc-local.service
syslog.service error inactive dead syslog.service
Cheers,
Last edited by PierreR (2012-12-05 20:16:59)Solved with the latest dbus upgrade (dbus-core removal)
-
[SOLVED] - [Gnome 3] GDM error dialog "failed to start session GNOME"
Hi,
Just installed Gnome 3 from testing.
First boot crashed, but that was a missing library for splashy, so removed splash from my grub boot line.
Now the system boots to GDM. I can start my Xfce session without any issues, but if I select Gnome, I get a dialog "Failed to start session GNOME".
Following is my GDM greeter log:
gnome-session[2208]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "/usr/lib/at-spi/at-spi-registryd" (No such file or directory)
(gnome-settings-daemon:2215): Gtk-WARNING **: gtk_window_set_wmclass: shouldn't set wmclass after window is realized!
** (process:2228): DEBUG: Greeter session pid=2228 display=:0 xauthority=/var/run/gdm/auth-for-gdm-RuDxNi/database
gnome-settings-daemon: xcb_io.c:140: dequeue_pending_request: Assertion `req == dpy->xcb->pending_requests' failed.
Failed to play sound: File or data not found
gnome-session[2208]: WARNING: Application 'gnome-settings-daemon.desktop' killed by signal
(polkit-gnome-authentication-agent-1:2229): Gdk-WARNING **: gdk_xsettings_watch_cb(): Couldn't find window to unwatch
(gnome-power-manager:2226): Gdk-WARNING **: gdk_xsettings_watch_cb(): Couldn't find window to unwatch
(gnome-settings-daemon:2234): Gtk-WARNING **: gtk_window_set_wmclass: shouldn't set wmclass after window is realized!
gdm-simple-greeter[2228]: Gtk-WARNING: gtkwidget.c:6778: widget not within a GtkWindow
gdm-simple-greeter[2228]: WARNING: Unable to read from file /etc/arch-release
Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1000007 (Login Wind)
Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
gdm-simple-greeter[2228]: Gdk-WARNING: gdk_xsettings_watch_cb(): Couldn't find window to unwatch
Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1000007 (Login Wind)
Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
(gnome-settings-daemon:2234): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
All help greatly appreciated.
Cheers.
Last edited by Padfoot (2011-04-08 23:38:59)I just remembered to do that.....
Think I have found my problem.
The Arch Wiki for Gnome 3 has the line for installing to a new system
# pacman -Syu testing/gnome
This installs gnome 3, but does not include gnome-shell or gnome-panel
Just installing them now. Will report back shortly.
Maybe the Wiki should be updated to reflect this, or the package testing/gnome updated to depend on gnome-shell and gnome-panel.
Cheers. -
[SOLVED] gnome-terminal 3.12 won't start
After I upgraded to gnome 3.12, I my terminal refused to start with the error "Message did not receive a reply". It turns out that the issue was that I had previously installed vte3-mosh-fix from the AUR, and the new version of gnome-terminal was incompatible with that old version of vte3. Running "pacman -S vte3" fixed the problem for me. (And I think that mosh fix has been incorporated into the latest version too.) Posting in case anyone else runs into this.
The patch was indeed merged into the upstream, it's the only reason I haven't updated the PKGBUILD.
-
my iphone suddenly stopped synchronizing!!! the message is "sync failed to start"..... any idea what to do?
With iPhone still connected, restart Mac's iTunes.
-
My ipod touch shows up under devices, and it always used to sync right but all of a sudden one day it started saying "You're ipod could not be synced because the sync session failed to start" and now it's not syncing anymore. How do I fix this?
See if this previous discussion helps.
Sync Session Failed to Start iTouch iOS5: Apple Support Communities -
I am getting this error message:
Service apple mobile device failed to start. Verify that you have sufficient privleges to start system services.Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!! -
When i try to sync my iphone to my computer, itunes tells me that the sync session failed to start. What does this mean?
Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives? -
Gnome-terminal 3.16.2-1 failed to open !
Hi
I'm new in arch and recently installed arch on my laptop with gnome-desktop !
This is error that i get when i try to open gnome-terminal :
$ gnome-terminal
(process:2675): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
Error constructing proxy for org.gnome.Terminal:/org/gnome/Terminal/Factory0: Error calling StartServiceByName for org.gnome.Terminal: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process org.gnome.Terminal exited with status 8
this is my locale output :
[root@aliarch alireza]# localectl
System Locale: LANG=en_US.UTF-8
VC Keymap: us
X11 Layout: us,ir
X11 Variant: ,
[root@aliarch alireza]# locale -a
C
en_US.utf8
POSIX
What happened ?!
thanks.
Last edited by alirezaimi (2015-05-18 16:56:13)ooo wrote:
welcome to the forums.
please search before posting, there are lots of threads about this issue, for example: https://bbs.archlinux.org/viewtopic.php?id=180103
make sure to use unicode locale, and that your locale is set up correctly in general
This is in gnome 3.16 and none of those solutions not work on my problem.
Thanks.
Last edited by alirezaimi (2015-05-18 16:54:52) -
[SOLVED] apache daemon fails to start on boot, but rc.d restart works?
I installed apache from the official repos and followed the instructions in the wiki for configuring it. I checked to make sure the http user exists, and I /etc/hosts looks good (to me). Upon boot, the daemon fails to start and I can't load local web pages, but running "rc.d restart httpd" works just fine. Since I'd rather not start it manually every time I boot, is there a way to fix this? Also, httpd is the last daemon in my DAEMONS array.
/etc/httpd/conf/httpd.conf:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 127.0.0.1:80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#php
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#PHP
Include conf/extra/php5_module.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
/etc/hosts
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost laptop
::1 localhost.localdomain localhost
# End of file
Per the wiki, I also tried commenting out the line that reads
LoadModule unique_id_module modules/mod_unique_id.so
Either way, it still fails on boot.
Last edited by pythonscript (2012-06-10 21:14:44)The SIGTERM are from reboots, yes. I'm not absolutely sure that the process isn't running; I just know that I can't access http://localhost immediately upon reboot. I have to restart the httpd daemon, which works fine. How would I be able to tell if it's just hung?
I checked everything.log, and I don't see anything that leaps off the page to me.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Successfully made thread 1930 of process 1908 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Supervising 2 threads of 1 processes of 1 users.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Successfully made thread 1931 of process 1908 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Supervising 3 threads of 1 processes of 1 users.
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: RegisterClient 106d33cade29b1ba713392593689729000000018320001
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: Adding new client 106d33cade29b1ba713392593689729000000018320001 to session
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): uid = 120
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): pid = 1842
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): App gnome-settings-daemon.desktop registered
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase INITIALIZATION
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase PANEL
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase PANEL
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase DESKTOP
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase DESKTOP
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase APPLICATION
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=106d33cade29b1ba713392593689681600000018320000
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmAutostartApp: started pid:1936
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase APPLICATION
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase RUNNING
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmPresence: adding idle watch
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:31 localhost kernel: [ 29.003352] wlan0: no IPv6 routers present
Jun 9 17:29:31 localhost NetworkManager[765]: <warn> could not commit DNS changes: (0) Could not replace /etc/resolv.conf: Operation not permitted
Jun 9 17:29:31 localhost NetworkManager[765]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS.
Jun 9 17:29:31 localhost NetworkManager[765]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jun 9 17:29:31 localhost NetworkManager[765]: <info> Activation (wlan0) successful, device activated.
Jun 9 17:29:31 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) complete.
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Setting up new connection
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: New client '0x7f9ff0004e60 []'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Initializing client 0x7f9ff0004e60 []
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 []' received RegisterClient(106d33cade29b1ba713392593689681600000018320000)
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmManager: Adding new client 106d33cade29b1ba713392593689681600000018320000 to session
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0x7f9ff0004e60 [106d33cade29b1ba713392593689681600000018320000]'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Set properties from client '0x7f9ff0004e60 [106d33cade29b1ba713392593689681600000018320000]'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: ProcessID = '1936'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
Jun 9 17:29:31 localhost dhcpcd[1640]: eth0: sending IPv6 Router Solicitation
Jun 9 17:29:31 localhost dhcpcd[1640]: eth0: no IPv6 Routers available
Jun 9 17:29:33 localhost dhcpcd[1677]: wlan0: sending IPv6 Router Solicitation
Jun 9 17:29:33 localhost dhcpcd[1677]: wlan0: no IPv6 Routers available
Jun 9 17:29:33 localhost NetworkManager[765]: <warn> error monitoring device for netlink events: error processing netlink message: Object busy
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:35 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:35 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:40 localhost NetworkManager[765]: <info> (eth0): IP6 addrconf timed out or failed.
Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jun 9 17:29:41 localhost NetworkManager[765]: <info> (wlan0): IP6 addrconf timed out or failed.
Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: handling signal 15
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Got callback for signal 15
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Logout called
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: requesting logout
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase RUNNING
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Caught signal 15, shutting down normally.
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: Done handling signals
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received SaveYourselfDone(success = True)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: sms_error_handler (0x1491c70, FALSE, 3, 9, 32771, 0)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: query end session complete
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received SaveYourselfDone(success = True)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: sms_error_handler (0x1491c70, FALSE, 3, c, 32771, 0)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: unable to find application for client - not restarting
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1428a40
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Using ConsoleKit for session tracking
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase EXIT
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]')
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received CloseConnection
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: in shutdown, not restarting application
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x7f9ff0004e60
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000])
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: in shutdown, not restarting application
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1428ac0
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: last client disconnected - exiting
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase EXIT
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Unreffing manager
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disposing manager
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1473070
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1473150
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
Jun 9 17:29:42 localhost gdm-simple-slave[1728]: WARNING: Child process 1832 was already dead.
Jun 9 17:29:43 localhost gnome-session[1970]: EggSMClient-WARNING: Desktop file '/home/ak5791/.config/autostart/dropbox.desktop' has malformed Icon key 'dropbox.png'(should not include extension)
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2022 of process 2022 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 4 threads of 2 processes of 2 users.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2023 of process 2022 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 5 threads of 2 processes of 2 users.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2024 of process 2022 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 6 threads of 2 processes of 2 users.
Jun 9 17:29:44 localhost dbus[739]: [system] Activating service name='org.freedesktop.ColorManager' (using servicehelper)
Jun 9 17:29:44 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Jun 9 17:29:44 localhost dbus[739]: [system] Activating service name='org.freedesktop.colord-sane' (using servicehelper)
Jun 9 17:29:45 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.colord-sane'
Jun 9 22:29:46 localhost rtkit-daemon[1910]: Successfully made thread 2079 of process 2079 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 9 22:29:46 localhost rtkit-daemon[1910]: Supervising 7 threads of 3 processes of 2 users.
Jun 9 17:29:46 localhost pulseaudio[2079]: [pulseaudio] pid.c: Daemon already running.
Jun 9 17:29:48 localhost dbus[739]: [system] Activating service name='org.freedesktop.UDisks2' (using servicehelper)
Jun 9 17:29:48 localhost udisksd[2110]: udisks daemon version 1.94.0 starting
Jun 9 17:29:48 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jun 9 17:29:48 localhost udisksd[2110]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jun 9 17:29:48 localhost kernel: [ 46.319778] gnome-shell-cal[2103] trap int3 ip:7ff3f55b85e1 sp:7fff94941890 error:0
Jun 9 17:30:19 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 22:40:53 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 22:47:15 localhost kernel: [ 1092.983585] usb 8-1.4.1: new high-speed USB device number 8 using ehci_hcd
Jun 9 22:47:15 localhost mtp-probe: checking bus 8, device 8: "/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.4/8-1.4.1"
Jun 9 22:47:15 localhost mtp-probe: bus: 8, device: 8 was not an MTP device
Jun 9 22:47:15 localhost kernel: [ 1093.132002] usbcore: registered new interface driver uas
Jun 9 22:47:15 localhost kernel: [ 1093.135601] Initializing USB Mass Storage driver...
Jun 9 22:47:15 localhost kernel: [ 1093.135785] scsi6 : usb-storage 8-1.4.1:1.0
Jun 9 22:47:15 localhost kernel: [ 1093.135905] usbcore: registered new interface driver usb-storage
Jun 9 22:47:15 localhost kernel: [ 1093.135913] USB Mass Storage support registered.
Jun 9 22:47:16 localhost kernel: [ 1094.137579] scsi 6:0:0:0: Direct-Access Kingston DT 101 G2 1.00 PQ: 0 ANSI: 2
Jun 9 22:47:16 localhost kernel: [ 1094.140133] sd 6:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.00 GB/7.45 GiB)
Jun 9 22:47:16 localhost kernel: [ 1094.140631] sd 6:0:0:0: [sdb] Write Protect is off
Jun 9 22:47:16 localhost kernel: [ 1094.140634] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
Jun 9 22:47:16 localhost kernel: [ 1094.141128] sd 6:0:0:0: [sdb] No Caching mode page present
Jun 9 22:47:16 localhost kernel: [ 1094.141132] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 9 22:47:16 localhost kernel: [ 1094.144916] sd 6:0:0:0: [sdb] No Caching mode page present
Jun 9 22:47:16 localhost kernel: [ 1094.144921] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 9 22:47:16 localhost kernel: [ 1094.146680] sdb: sdb1
Jun 9 22:47:16 localhost kernel: [ 1094.151407] sd 6:0:0:0: [sdb] No Caching mode page present
Jun 9 22:47:16 localhost kernel: [ 1094.151411] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 9 22:47:16 localhost kernel: [ 1094.151414] sd 6:0:0:0: [sdb] Attached SCSI removable disk
Jun 9 22:47:17 localhost ntfs-3g[2636]: Version 2012.1.15 external FUSE 29
Jun 9 22:47:17 localhost ntfs-3g[2636]: Mounted /dev/sdb1 (Read-Write, label "kingstonGB", NTFS 3.1)
Jun 9 22:47:17 localhost ntfs-3g[2636]: Cmdline options: rw,nodev,nosuid,uid=1000,gid=100,dmask=0077,fmask=0177,uhelper=udisks2
Jun 9 22:47:17 localhost ntfs-3g[2636]: Mount options: rw,nodev,nosuid,uhelper=udisks2,allow_other,nonempty,relatime,fsname=/dev/sdb1,blkdev,blksize=4096,default_permissions
Jun 9 22:47:17 localhost ntfs-3g[2636]: Global ownership and permissions enforced, configuration type 7
Jun 9 22:47:17 localhost udisksd[2110]: Mounted /dev/sdb1 at /run/media/ak5791/kingstonGB on behalf of uid 1000
Jun 9 22:47:28 localhost dbus[739]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
Jun 9 22:47:28 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.UDisks'
Jun 9 22:47:46 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 22:57:59 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 23:01:02 localhost /USR/SBIN/CROND[5529]: (root) CMD (run-parts /etc/cron.hourly)
Jun 9 23:21:02 localhost -- MARK --
All I notice is that my system's time is having a few problems, since you'll notice that events occur at 22:00 and change, then 17:00 and change, then back to 22:00 and change afterwards. Could this be the problem? I've had the CMOS batteries peg out on me suddenly in the last few weeks. I would hope this sytem is not also suffering a similar fate. Nothing else was happening on my system except for the standard processes from /etc/rc.conf and other standard ones, since I've just been rebooting, checking the logs, then posting here.
Maybe you are looking for
-
Variable not found in class - Newbie
public void executeSearch() { try { File startSearchDir = new File(directory); } catch (NullPointerException npe) { System.out.println("The file path entered is not valid."); return; File [] fileArray = startSearchDir.listFiles(); Why is the startSea
-
Prob. exec. print job from RFC which im calling Web Dynpro java in Portal
Hi, Ive got a problem executing a print job from an RFC which im calling in Java web Dynpro Application in Portal. Im using an Acess Method G: for Front End Printing but Order gets stuck with the Status "Waiting" "Front end unavailable". Any help wou
-
Editing from a WYSIWYG Website
I designed a website using Web Page Maker (a WYSIWYG web builder). Each piece of text and graphics is contained within it's own "box" which represents the <div> "container" that the program outputs. Although I can select this div and copy and paste n
-
LOV depending on value of field in report
I have a report on a query. In one of the fields I want to have a Radio Group, Based on query based LOV. The values in the LOV depends on the value in the field in the report. Is this possible, and how do I define the LOV for it? Would it be somethin
-
T43 Freezes only on New Battery Power
HI Gurus, I have a T43 1871 FU1 Model which is working fine so far. Recently my Original Battery is seems to be very weak, i thought to purchase a new battery. First tried with Lenovo, i heard that there are no battery replacements available for thes