Gnome with tint2 panel??

i was trying to figure out how to kill the gnome-panels and replace with tint2 along with trayer for at least one of the panels. i started to incorporate some of openbox into gnome. but any real detail info on how to do
i tried one method thru the gconf but that almost killed my gnome. anyhow ideas would be appreciated.

... but, if you want to get rid of the window manager (replacing it with openbox) and of the panel, perhaps you can consider to drop gnome as a DE, continuing to use all the gnome apps you like and need in an openbox environment

Similar Messages

Gnome 3 striped panel using Catalyst driver

I'm currently using the properietary ati catalyst driver by necessity, not choice. The open source driver does not have good power management and in particular will not control the fan properly. This is a well known bug and has been acknowledged on this and other forums often. Honestly, the only reason I can think of for anybody using the open source ati driver is if they 1) have an old gpu 2) are using a desktop pc and don't notice the sound 3) notice the sound and heat but know no better. After installing gnome 3, the panel ends up looking like this:
which isn't even my screenshot. This was posted on a stackexhange forum and the solution provided was to simply use the open source drivers.
I'm hoping that someone here has found the correct solution, although I'm not even sure if one exists yet. It's just incredibly strange that gnome 3 would have this sort of problem when no other panel I know of, including Unity, does.

I have seen enough of this. Conclusion is, if you have to use Catalyst (properietary), forget about GNOME Shell for a while. Not only that top panel, but also there exists several corruptions here and there with Mutter(?) + Catalyst. Use the fallback mode if you can't get any further, or better use Compiz+Cairo-Dock to completely replace the GNOME window manager in GNOME/GTK3.
Even if you can get the shell working, it's not worth using it at this stage. Check later.

Having issues with BC panel in DW

Hi,
i'm having trouble with the BC panel in DW:
- I'm getting an error message, saying that Configuration:Shared:BC:JS:bc_sites.js is running for a long time. This window pops up from time to time, resolving is possible but annoying. (Deleting configuration folder and rebuilding it). But the error message returns after a few days.
- Loggin in with BC panel from DW always takes two times, as the panel does not react the first time, I also have to login each time I restart DW or change a site. No way of staying logged in. Thats annoying.
- The panel renders the content in a smaller area then the panel is, so if you increase width of panel, content stays narrow. Thats weird.
Would be nice to take care of this BC panel issues, as the BC panel is an important part of BC-DW workflow.
My specs:
iMac with OS X Mavericks
Adobe CC
BC Partner
Regards,
Dennis

Hi,
Sorry you're having problems.
How To get Help Quickly
http://forums.adobe.com/thread/470404
Post a URL to your test page so we can *SEE* what you see.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Problem with Accordion Panels

Hi
I have an issue with Accordion Panels.
http://characteraday.businesscatalyst.com/guided.html
You can see in the link above that I have Accordion Panels on the right side that say open/close tip. The first one open and close and displays the tip. All the others do the same but when they open then push the one under it down. The first one does not do this and I like this a lot better. Any ideas how to make them all work the way the first one "Enter the Character's name" works.
Thanks for your time.

Modify the following line by adding the mark-up coloured red.
<div class="AccordionPanelContent"><span class="CollapsiblePanelContent"><img src="productimages/tinyimages/doorkitseat.jpg" width="50" height="50">The <strong>Door Insert Kit</strong> is a bathtub conversion kit. By removing a portion of the bathtub wall and inserting a door, an existing bathtub becomes accessible, retaining its use a a bathtub. <em><a href="doorkitandseat.html"><strong>More</strong></a></em></span></div>
I hope this helps.
Ben

[svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

Hi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ

Trouble with accordion panel

I'm trying to put an accordion panel in a page of the website i'm creating but i've a weird problem.
First of all, this is the link of the page
http://wwwipiniriolotermeit01.businesscatalyst.com/menù.html
As you can see, when i choose one of the option of the panel, the background begin to shake.
Of course i've tried with other panels, included muse's widget but the results is the same.
Can someone help me to resolve this issue?
Thanks in advance.

Thank you very much again.
Last time i've uncheck only the element of the master page's footer not the
entire "menu" page from the menù.
Now, as you say, the jittering is disappear.
Regards
Luca
2014-03-07 16:18 GMT+01:00 Aishvarya Raj Rastogi <[email protected]>:
Re: Trouble with accordion panel created by Aishvarya Raj Rastogi<http://forums.adobe.com/people/aishvarya+rastogi>in *Help
with using Adobe Muse CC* - View the full discussion<http://forums.adobe.com/message/6188378#6188378

Problem with tabbed panel

I have a problem with tabbed panel...this panel has 3 columns, I copied to each of them a diffrent text (diffrent height)...I expected to obtain diffrent working area of column, for example 1st column-height 7500 px, 2nd-1500 px, 3rd-2500 px, but I received one height 7500 px, each column has been formatted to this size....below a text I have “empty space”- (it is a diffrence between working area and text area)...I put the text to the 1st column for example 7200 px height, empty space below this text is 300 px I received 7500 px of working area in this column, here the problem doesn`t exist but….2nd column i have height of text for example 1300 px, below this text i have 6200 px empty space...It should be height 1300 px of text and maybe 200 px of empty space...so the working area could have at 1500 px not 7500 px of height....I try to change it (to for example 1500 px) but it still return to the basic 7500 px height and can`t do it...The solution is to use another form like. the accordion form..but it is a row form….when you put a diffrent sized text (height) you will receive diffrent size of working area (height), you obtain 7200px text +300 px empty space=7500 working area in 1st row.. 1200 px text + 300 px empty space=1500 workin area px in 2nd row and 2500 working area px in 3rd row…everything is fine in this form…each row has been formatted to the different size of height…but I prefer to use a tabbed panel (column form) instead a accordion form.…I don`t to waste the time to correct the code in html text editor like PSPad…
Best Regards
Kamil

A couple of threads here that should answer your query.
http://forums.adobe.com/message/5080345
http://forums.adobe.com/message/5104253
Thanks,
Vinayak

Vi's with sub panel

hi
i want to run an aplication on fp-2010 which have sub panels(panel embedding)
but i got the following problems
1.vi's with sub panel are not loaded on fp-2010
2.and not supported by Lab VIEW Real Time
can any one help me in this regard or suggest any other method that i run my application with fp-2010
OR can i use any other tecnique which give the same functionality as sub panels and compatible Lab VIEW Real Time
regards
mazhar

duplicate post

Can you use anchors with tabbed panels???

Im trying to use anchors with tabbed panels but they dont seem to work. I need to be able to link to specific tabs and specific areas within those tabs, but I haven't been able to find a way to do this. Does anyone know or have a work around?

Yes, that is an improvement in Muse, check release notes here, http://forums.adobe.com/message/5104247 - Widget Improvements
The selected tab in Design view for the Tabbed panel widget will now be selected/active when previewing, exporting or publishing the site to Business Catalyst.
- Abhishek Maurya

Trouble with Update Panel in Chrome browser

Hi.
I work with update panel.
<asp:UpdatePanel runat="server" ID="someid" >
<ContentTemplate>
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger ControlID="someid2" EventName="somefunction" />
</Triggers>
</asp:UpdatePanel>
In IE all working fine. In Chrome and Firefox after ~30 seconds if i tried to clicked any button the postback is done and page will reset.
How to fix it?

Hi,
Do you want to use the update panel on application page or user control in SharePoint 2013?
If that is the case, here is a similar thread for you to take a look at:
https://social.technet.microsoft.com/Forums/office/en-US/c33d4a46-87d6-4dbc-a24c-cb8e5f9eb1ea/page-refresh-after-postback-from-updatepanel-in-sharepoint-2013
If not, I suggest you post it to ASP.NET Forum, you will get more help and confirmed answers from there.
Best Regards
Dennis Guo
TechNet Community Support

How to open pdf with bookmarks panel showing?

Hi all,
I have searched and had no luck. I found a helpful a post but it did not help in my case. I need my PDF that I created via LiveCycle to open with bookmarks panel showing. I tried (control+D) File > Properties >initial View but the features/options are all disabled.
The file is not passport protected and I created myself.
Any help/tip provided would be very much appreciated,
Adnan

Paul,
Thanks for your quick response. It works; however, it prompts to save changes even to file even if I make no changes to it.
I created a button to save changes (code below) but it still prompts.
app.execMenuItem('Save');Named: Action=SaveAs;
Thank you,
Adnan

Installing Gnome with Fink

I am trying to install the Gnome wm using Fink, I have gotten some of it installed but I am running into a problem with some of the packages. This is the error message:
OMF file [/sw/share/omf/gpl/gpl-pa.omf] does not validate against ScrollKeeper-OMF DTD: /sw/share/xml/scrollkeeper/dtds/scrollkeeper-omf.dtd. I also got a similar OMF error when I tried to install Gnome themes and applets. Any ideas? Thank you.

Post it to the fink users email list. It is very active and you will get advice and/or the package will get fixed quickly.
http://news.gmane.org/gmane.os.apple.fink.general
When you describe your problem, provide them with more context (10.4, 10.5, intel, ppc, etc), what package you are having the error with, if it is happening during installation or when you try to initiate gnome with
gnome-session

I have some problems with element Panel Label and Message.

I have some problems with element Panel Label and Message. When I create form from VO attributes then I have Label for input text element. If I use Panel Label and Message element then I need to copy LABEL from input text element to Panel Label and Message element LABEL PROPERTY. Can I define in View object that I don't need label and want all attributes in Panel Label and Message element?
BEST REGARDS

You can simply remove the label attribute for the input text on the page.
sid

Calling Javascripts with a panel then prevents copy/paste functions in Photoshop CS5

Hi,
I have a simple panel in Photoshop that calls a Javascript when a button is pressed.
I have a simple script that does some Duplication of layers and a bit of simple image manipulation.
I run the script from the Extended Toolkit and eveything works fine.
I run the same script from the Panel and the script runs fine; but then the copy / Paste functionality of Photoshop is broken.
I have to close the Panel window or run the script from the toolkit to get the functionality back.
EDIT: I have not narrowed this down to simple interations with the Panel can casue this issue - clicking on icons, switching `Tabs` etc...
Does anyone know why this is happening?
Cheers,
Pete

Hi,
I created a simple panel that only had a button that calls an external JavaScript.
Even if I simply click on the panel a few times, move it around etc without executing the script, I can get the copy paste error. It happens 90% of the time and interestingly it only happens on the currently active document.
The only way to get the functionality back is to close the panel.
It seems to be a focus issue, but as I'm not calling any script in this case - where could I put the Bridge Talk command?

How to merge the Panel with another Panel to One Panel?

As Title!!

i will give it a shot. by no means do i say it is correct being a beginner myself
Panel aPanel = new Panel();
Panel anotherPanel = new Panel();
Panel mythirdPanel = new Panel();
aPanel.add(anotherPanel);
aPanel.add(myThirdPanel);
this should create one panel called aPanel with two panels inside - another Panel first, followed by mythirdPanel second. This should be in FlowLayout pattern as that is default unless specified.
That is my guess and my shot.
8)

Gnome with tint2 panel??

Similar Messages

Maybe you are looking for