GNOME3 is not working well after install the nvidia driver

I changed my graphic device from intel (integrated in i5 sandy bridge) to nvidia (GTX550 Ti).
When I reboot my PC, an error about GNOME failed something was showned.
I ignored it and installed nvidia package using pacman.
After that, I installed new nvidia driver but GNOME is not working properly.
Terminals which I can see when type ctrl + alt + function key are not working either.
This is part of my desktop screenshot.
http://s18.postimage.org/gew6dx5gp/screenshot.png
How can I restore GNOME?
Moderator edit: The included image is too big. It has therefore been reduced to its URL. Please also have a look at these screenshot posting rules.
Last edited by bernarcher (2012-04-05 09:38:39)

I have no big issues with gnome3 and nvidia, in case you haven't, make sure your xorg.conf is correct or you can let nvidia make it for you, just backup/delete your current one (if any) https://wiki.archlinux.org/index.php/NV … figuration

Similar Messages

All of a sudden, Adobe Flash is not working. Have installed the latest version to no avail. This happened at the same time on four (4) computers! Any suggestions?

Question
All of a sudden, Adobe Flash is not working. Have installed the latest version to no avail. This happened at the same time on four (4) computers! Any suggestions?

Well, I kinda figured that was true, so I disabled it. Firefox does not lock up now. I suspect it might be a Google Finance page graph that is causing the problem, rather that Flash. Thanks for all your help. J

My trackpad is not working properly since installing the upgrade. What should I do?

My trackpad is not working properly since installing the upgrade. The keyboard is also not working right. What should I do?

i am getting the same issues. i have to use an external mouse but i still get moves even without touching the mouse or trackpad. i upgraded to maverick about 2 months ago. how can i fix this fast? am a dj so i really need this problem fix. and now my keyboard is acting up even while i type

Has anyone's screen go blank and not boot up after installing the new yosemite OS

has anyone's screen go blank and not boot up after installing the new yosemite OS

Hi Mofimac,
Thanks for visiting Apple Support Communities.
If your Mac is only starting up to a blank gray or white screen after updating OS X, you can find some useful troubleshooting steps in this article:
Mac OS X: Gray screen appears during startup
I recommend going through these first three sections first:
Disconnect, test peripheral devices and network cables
Perform a Safe Boot
Reset the NVRAM / PRAM
Best Regards,
Jeremy

GUI not working anymore after installing of ABAP preview

Hi,
I have sapgui 6.40 installed on my computer.
Now after installing the Netweaver Preview ABAP stack (the installation worked fine) I cannot start my sapgui anymore.
I get a messagebox with the following message:
"The procedure entry point RfcResetTraceDir could not be located in the dynamic link library LIBRFC32.dll".
The current version of the LIBRFC32.dll in the system32 directory is 7.xx.
I replaced it with an 6.xx version, but it didnt help.
As far as I know the RFC dll is up- and downwards compatible, so I cant explain this error.
Any suggestions ?
Regards,
Elko

Now I deinstalled SAPGUI from my system and reinstalled the 6.40 version.
But I get still the same error. Whats the problem. Why is the Netweaver Preview messing up my GUI installation ??
Elko

Safari 5.1.2 Not working right after install

Hi, after installing the update for Snow Leopard safari is not working right. Some pages don't load, and other don't load correctly.
I have to keep hitting refresh two or three times. Also thunbnails are not displaying. Even the apple page comes up looking buggy.
Please help!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. First, disconnect all wired peripherals except keyboard, mouse, monitor, and Ethernet, if applicable. Boot in safe mode and log in as yourself. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all, perhaps including wireless networking on certain Macs. If you usually connect to the Internet via WiFi, and it doesn’t work in safe mode, connect using an Ethernet cable. If you can’t do that, reboot as usual (i.e., not in safe mode) and perform a safe login, as follows: Enter your credentials at the login screen, then hold down the shift key and click the “Log in” button. Keep holding the key until the menu bar appears. In this mode, your login items, among other things, won’t load.
In safe mode, test again. Same problem(s) now?
After testing, reboot (if you booted in safe mode) or log out/log in (if you performed a safe login) as usual.

Xperia Z: Music app not working well after update to Lollipop

Hi, the music app isn't working well after I update my phone to Lollipop, all the album art are lost and the music info are messed up. I tried to add album art and edit the music info as well, but after a while, the problem comes back again. Can anyone help please?
Solved!
Go to Solution.

- Go to Settings -> Apps -> All -> Music -> Force Stop, Uninstall updates, Clear data and restart your phone.
- Go to Play store and re-update your Music app.
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos

After installing the DR Driver on my Audigy 2 Value, I can no longer access the Equali

Installed the latest driver via the web update for my Audigy 2 value. When I reboot my machine and try to access the equalizer, it gives me a message saying "The audio device supported by this device is not detected etc". It worked fine before I installed this driver.
Any help appreciated.
Gyre

Can you try rolling back to the previous driver (if you have a restore point), or reinstalling this update? Does that have any effect?
If you have any onboard audio make sure that's fully disabled in the BIOS aswell.
Cat

I upgraded to OS X10.9.4 and now my Cannon scanner will not work. I downloaded the new driver and still no luck.

I upgraded to OS X10.9.4 and now my Cannon MX 860 scanner will not work. The printer works. I downloaded the new driver and still no luck. Please help!

Open Print & Scan preferences. Select the printer in the sidebar list and click on the Delete [-] button. CTRL- or RIGHT-click in the sidebar area and select Reset Print System from the context menu. Re-Add the printer by clicking on the Add [+] button, select your printer from the little browser that opens, select the proper driver if it isn't set automatically, then click on the Add button. See if it now works.
Oh, be sure you install the new driver you downloaded.
BTW, you don't have a PowerMac as shown in your profile. PowerMacs were tower machines that ran PPC processors, not Intel processors. You really should correct that information in your profile.

Aperture 3 does not work well since installing Mavericks. Constantly have to repair the library database. Any suggestions?

Aperture 3.5.1 was working well enough for me in Mountain Lion, but it seems that switching to Mavericks has made it slower, made it crash frequently and also given me frequent messages that the database is corrupt and I need to rebuild the database library, which I have done multiple times. I also use Aperture for Photo Stream, and it is especially slow and problematic there. Any ideas? Should I just use iPhoto instead? I'm more familiar with the flow in Aperture and would need to learn how better to use iPhoto, so that would be a last resort for me.

Aperture 3.5.1 was working well enough for me in Mountain Lion
Aperture 3.5.1 is incompatible with Mt. Lion - you must have had an earlier Aperture version running with Mt. Lion.
also given me frequent messages that the database is corrupt and I need to rebuild the database library
That message is prompted by the crashes. After a crash your library may need repairing.
Aperture 3.5.1 was working well enough for me in Mountain Lion, but it seems that switching to Mavericks has made it slower, made it crash frequently
Is all your software compatible with Mavericks? Plug-ins, external editors, preference panes, device drivers, video codecs? Did you install any other software, when you upgraded to Mavericks?
Where is your Aperture library? On your system drive or external drive?
Does Aperture also crash, if you launch it while holding down the Shift key?

PE7 Edit functions Not Working well after Upgrading from Vista to Windows 7

My PE 7 was working very well under Vista Home Premium - 64 Bit. But after I upgraded (not clean install) to Windows 7 Home Premium - 64 Bit, it appears that the PE7 is working OK except for the EDIT functions.
I am talking about the Tool Icons on the left side. When I select any icon, the Mouse Curser does NOT chnage to reflect the proper shape. For example, when I click the Crop Tool, my mouse curser chnages to 3 little (tiny) crop icons in a row, and the crop functions don't work like they should.
Can anyone please help as to waht I need to do to correct this situation.
Thank you.

Over at elements village there are a couple threads about this
on windows 7.
I have never had this problem, but other users say the solution
in these threads works.
So it might be worth a try.
http://www.elementsvillage.com/forums/showthread.php?t=55922
http://www.elementsvillage.com/forums/showthread.php?t=54101
Hope this helps.
MTSTUNER

HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing games

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Macbook freezing and not working well after Lion installation - thoughts?

hey guys,
i have a late 2007 macbook running OS X Lion 10.7.2. It was running absolutely great with snow leopard; seriously i loved it, no complaints or major issues. I recently bought and installed Lion, but now my laptop is not working correct and freezes ALL the time. seriously i have to turn my computer off every 2 or 3 minutes, 5 or 10 if i'm lucky. programs and applications are also not working so well.
WHAT COULD THIS BE?
HOW DO I FIX THIS?
uninstall lion? reinstall snow leopard?
PLEASE HELP
thanks everyone!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find nothing has changed after you complete it.
Boot in safe mode. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.
Test. Same problem now?

Bluetooth does not work well after upgrade to win 8.1 from win 8

System: Dell Inspiron 15R 5520
Bluetooth hardware: Intel(R) Centrino(R) Wireless Bluetooth(R) 4.0 + High Speed Adapter
Microsoft Bluetooth Enumerator
Ever since I upgraded from Win 8 to 8.1, the bluetooth has not been working well.
The option to browse a remote folder or send a file does not work.
I can send a file only by opening the contaning folder, right click, and send to bluetooth, but cannot receive a file unless I go to
run and then open fsquirt.exe .
I have unpaired and uninstalled the devices respectively, and then reinstalled and repaired them. But this does not work .either.
Unfortunately, I am unable to paste screenshots of the device manager and error messages until I am verified.
Can anyone give me a solution to this problem?

Verify that you have the latest drivers for Windows 8.1 installed from the manufacturer's website.
http://www.dell.com/support/drivers/us/en/19/Product/inspiron-15r-5520

Iphoto not working properly after installing snow leopard...

the two main problems are...
1) when editing in full frame, if I zoom in on the photo and try to move around with a two finger scroll, there is a big delay between me moving to where I want to be and the photo actually getting there.
2) when editing with "adjust," there is a delay when changing anything (such as highlights and shadows).
everything was perfect and happened in real time prior to installing snow leopard. when I called apple, I was told it was probably because iphoto is not 64-bit yet (would have been nice to have known that this would be an issue prior to the install). he said that if everything on my computer was added after snow leopard, I would probably be fine.
can anybody give me some advice on what to do here? I wouldn't mind going back to leopard if I can do that without losing everything, but am very open to ideas if anyone here has anything on this.
side note...safari seems to be having issues as well. takes a long time to load pages and sometimes won't be able to open them without closing out and reopening it a time or two. wasn't a problem before either.
thank you,
sean

I am having a similar(?) but perhaps distinct problem. My wife and I have separate user accounts on our MacBook. We were sharing the same photo library under Leopard with no problems whatsoever. Now, after installing SL, there is a strange situation. If I am in my account, and I import images from a camera into iPhoto, I am able to view and edit with no problems. However, when my wife launches iPhoto, she can see the event and the thumbnails in the event, but when she tries to edit the picture or even preview in iPhoto (clicking the space bar), the picture becomes a blank dark screen. If you hit add face while on the blank screen, the program can pick out the faces, but the picture is still blank.
If I try to import photos into the library when she is using her user account, the reverse applies to me. That is, I can only preview and edit pictures added under my account, and not hers.
I never had this problem with Leopard or with iPhoto '09 under Leopard. Any ideas what might be going on? I would think to go the genius bar, but I am not sure what they woudl be able to do about it. Thanks in advance.

GNOME3 is not working well after install the nvidia driver

Similar Messages

Maybe you are looking for