GNU screen loads in shell, but not in X shells...

I have set zsh to start screen when it starts, so immediately as I log in (regular Arch prompt, no DM).
The problem is that if I run startx to get me into GNOME, running the terminal in there doesn't present me with the same screen session. Just a regular prompt.
I guess this is because screen is already running in the background?
This didn't happen when I was using GDM.
Is there a way round this?

Read man screen for how sessions work. There's countless ways to do it with -R -D and -x switches.
And a terminal in gnome that starts bash doesn't necessarily read bashrc, read Invocation in man bash.

Similar Messages

  • I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

    I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

    I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

  • I have deleted my iCloud app from my iPad and cannot get it back.  I've reset the home screen, everything else appears but not that

    Not sure if I had to submit my question:
    I have deleted the iCloud app from my iPad and cannot get it back.  I've reset the home screen, everything else appears but not that

    There isn't an iCloud app, I'm not sure what it is that you have deleted, but it isn't iCloud.

  • E-mail on my iPad is 'frozen'. Other screens respond to touch but not the e-mail

    The e-mail on my iPad is 'frozen'. Other screens respond to 'Touch' but not the e-mail.
    Does anyone have any suggestions?

    Your Users Guide has a whole chapter (at the end) devoted to what you do when things aren't going well, generally following the sequence of
    Restart - red slider, then boot up again
    Force Quit apps - either via Sleep/Wake followed by Home, or via Recents Tray
    Reset - hold Home & Sleep/Wake to force reboot
    Reset iPad Settings - Settings > General >Reset
    Erase All Content -   same as above
    Restore iPad Software - iTunes or iOS 5 equivalent
    You start at #1 and work your way through until the issue you're seeing goes away. If you get through all of the steps and it still doesn't work, you're pretty much out of gas and have to start talking to Apple.

  • Slow web page loads on Mac, but not for PC

    I use a D-Link wireless router (DI-524) for my PowerBook G4 15" and my roommate's Dell PC. Very recently I seem to get very slow web page loads with some pages not even loading at all.
    Airport is consistently connected with no drops at all and when I'm downloading something it never gets interrupted the whole way through.
    My roommate's PC has no problem whatsoever and all of the web pages that he visits load instantly. It seems that my main problem is with web pages.
    I've tried doing a clean install on my Powerbook, I've tried resetting the router (I've tried upgrading the firmware but the router decided it didn't want to work with the new version). And surprisingly, I get the same slow speeds when I hook up my Powerbook to my router via ethernet cable. The only time my speeds are perfectly fine is when I hook up my Powerbook directly to the wall (I dorm in a university so we have a T3 line).
    Can someone please give me some advice on this very frustrating issue?

    In addition to Neds suggestions, empty the Safari cache (which should be empty after a clean install).
    Goto the Safari Get Info screen (in Finder or in Dock if you have Safari there), click the triangle on languages, and disable those you don't use.
    My Safari response time was significantly slowed after the 10.4.5 update, and using the combo updater took care of that. The 10.4.6 combo update is located here.

  • Pdf docs will load on MacBook but not iMac

    I have an iMac and a Macbook Air. Both bought in the past three years.  I am running a proprietary back end database which uses a browser as a front end and is Java dependant..  Both have current versions of OS Mavericks, Java, safari and mozilla.  The database contains pdf docs that are displayed with the standard pdf icon.  When I click on the icon in my MacBook, they load into Word or Adobe on a separate page.  When I click on the icons in my iMac they do not load.  Does anyone have and ideas?

    Hi.  Thanks for the quick reply.  I realized I was not clear.  The docs are resumes.  If they are Word docs, they open in Word.  If they are pdf, they open in Adobe Acrobat Pro.  These open fine on my MacBook Pro, but not the iMac.  When I try opening them on the iMac, I get a Java error message.  Any ideas?

  • Loading from local but not remote HELP??

    Hi
    I've created a flash "app" that works 100% on my local server but not on a remote one, I'm connecting to a MySQL server using flash VIA php.
    Weird part is the fact that I can delete and add to the database but it doesn't want to read from the server and populate a datagrid???
    If I test the php file it gives the correct output in IE and the flash file is in the same directory(and domain obviously) it just doens't read\load it?
    Any help would be MUCH appreciated!!!
    Link to php and flash files:
    http://portable-shade.vacau.com/PSIO/

    Hello,
    This forum is actually for the Adobe Digital Rights Management (DRM) product "Flash Access".  Your question likely belongs in the Flash Player forum @ http://forums.adobe.com/community/webplayers/flash_player
    cheers,
    /Eric.

  • Movie loads on Firefox but not IE (surprise?), but also not in Safari??

    I am a novice, but it's hard to do anything wrong using iWeb. I tried sharing a movie made in iMovie to iWeb on my .mac account. The movie only plays on a Mac (or PC) using Firefox. Both IE (what a surprise! joke...) and Safari will not load the movie. It's 8.2 MB, orig size about 3.2 GB. It's understandable that the movie might not load on IE, but Safari - same Mac used to create the site. Note: it does load in Safari, if I am simultaneously running Firefox and have the page with the movie open and loaded, otherwise it just hangs and shows the big Q for Quicktime, but no movie... Any ideas. PS. When I send the updated site to a folder on my Mac, it works fine, but when I post it to .mac, no go.
    Thanks for any help for this novice.

    I am a novice, but it's hard to do anything wrong using iWeb. I tried sharing a movie made in iMovie to iWeb on my .mac account. The movie only plays on a Mac (or PC) using Firefox. Both IE (what a surprise! joke...) and Safari will not load the movie. It's 8.2 MB, orig size about 3.2 GB. It's understandable that the movie might not load on IE, but Safari - same Mac used to create the site. Note: it does load in Safari, if I am simultaneously running Firefox and have the page with the movie open and loaded, otherwise it just hangs and shows the big Q for Quicktime, but no movie... Any ideas. PS. When I send the updated site to a folder on my Mac, it works fine, but when I post it to .mac, no go.
    Thanks for any help for this novice.

  • Home sharing will load on PC but not Mac

    I'm transferring music from my old computer (PC) to my new one (MacBook Pro) and I can see my Mac's library on my PC but not vice versa. Help?

    Hi Dexterfreak95,
    It sounds like you got a good start to Home Sharing as you have it one direction.
    I would suggest the steps in this article next.
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Best Regards,
    Nubz

  • Page fully loads in IE but not in Firefox

    This page opens fully in IE but not in Firefox 4.

    yeah, some pages are only designed for internet explore. cannot make compatibility with firefox 3.x/4.0 or google chrome 10.x.x.x, for example, zude.com, these kind of websites now are minorities, but they exist.
    so at least, you need 2 internet browser for all you need, an IE browser version upper than 7.0, and a firefox 4.0 or a google chrome 10.x for fast browse.

  • In app purchases payment type - gift card, loaded in itunes but not found in app

    So I just bought two $50 gift cards and loaded successfully. But when trying to purchase in-app, it wont accept payment type (credit card is maxed, hence the gift card in the first place). And so I changed the payment type to "none" in settings, but now it says insufficient funds. How do I spend the gift card monies in the app ?

    Do what it told you to do.
    Contact itunes support
    http://www.apple.com/support/itunes/contact/

  • GDM loaded and active, but not showing login-screen.

    Hello Archers!
    At the very beginning I would like to say "Hello" to all forum users!
    I recently started using Arch Linux, after moving from Win8.1 to Ubuntu and then to Arch. I've went through a struggle of installing proprietary AMD graphic card drivers and finally managed to get it working. Although that was achieved with a little sacrifice - GDM stopped working. I can still run Gnome with "startx", but I can't get login-screen to work. Any ideas what happened and how to get it working?
    I'm using xorg115 and proprietary AMD graphic drivers.
    Output of
    systemctl status gdm
    ● gdm.service - GNOME Display Manager
    Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
    Active: active (running) since pon 2014-10-20 20:37:45 CEST; 1min 8s ago
    Main PID: 277 (gdm)
    CGroup: /system.slice/gdm.service
    └─277 /usr/bin/gdm
    paź 20 20:37:46 ASRock-P67-Pro3 gdm[277]: GLib-GObject: invalid unclassed pointer in cast to 'GdmSimpleSlave'
    paź 20 20:37:46 ASRock-P67-Pro3 gdm[277]: Child process 313 was already dead.
    paź 20 20:37:46 ASRock-P67-Pro3 gdm[277]: GdmDisplay: display lasted 0,057605 seconds
    paź 20 20:37:46 ASRock-P67-Pro3 gdm[277]: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors
    paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[306]: Process 303 (Xorg) of user 0 dumped core.
    paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[308]: Process 307 (Xorg) of user 0 dumped core.
    paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[312]: Process 311 (Xorg) of user 0 dumped core.
    paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[310]: Process 309 (Xorg) of user 0 dumped core.
    paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[300]: Process 282 (Xorg) of user 0 dumped core.
    paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[314]: Process 313 (Xorg) of user 0 dumped core.

    Here you go!
    grep (EE) /var/log/Xorg.0.log
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 21.204] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
    And full log here
    [ 20.732]
    X.Org X Server 1.15.2
    Release Date: 2014-06-27
    [ 20.733] X Protocol Version 11, Revision 0
    [ 20.733] Build Operating System: Linux 3.15.1-1-ARCH x86_64
    [ 20.733] Current Operating System: Linux ASRock-P67-Pro3 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
    [ 20.733] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw nomodeset initrd=../initramfs-linux.img
    [ 20.733] Build Date: 27 June 2014 07:32:26PM
    [ 20.733]
    [ 20.733] Current version of pixman: 0.32.6
    [ 20.734] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 20.734] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 20.735] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 21 07:58:46 2014
    [ 20.735] (==) Using config file: "/etc/X11/xorg.conf"
    [ 20.735] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 20.735] (==) ServerLayout "aticonfig Layout"
    [ 20.735] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 20.735] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 20.735] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 20.735] (==) Automatically adding devices
    [ 20.735] (==) Automatically enabling devices
    [ 20.735] (==) Automatically adding GPU devices
    [ 20.735] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 20.735] Entry deleted from font path.
    [ 20.735] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 20.735] Entry deleted from font path.
    [ 20.735] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 20.735] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 20.735] Entry deleted from font path.
    [ 20.735] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 20.735] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 20.735] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 20.735] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 20.735] (II) Loader magic: 0x811cc0
    [ 20.735] (II) Module ABI versions:
    [ 20.735] X.Org ANSI C Emulation: 0.4
    [ 20.735] X.Org Video Driver: 15.0
    [ 20.735] X.Org XInput driver : 20.0
    [ 20.735] X.Org Server Extension : 8.0
    [ 20.737] (--) PCI:*(0:1:0:0) 1002:6818:174b:e217 rev 0, Mem @ 0xe0000000/268435456, 0xf7e00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
    [ 20.737] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 20.737] Initializing built-in extension Generic Event Extension
    [ 20.737] Initializing built-in extension SHAPE
    [ 20.737] Initializing built-in extension MIT-SHM
    [ 20.737] Initializing built-in extension XInputExtension
    [ 20.737] Initializing built-in extension XTEST
    [ 20.737] Initializing built-in extension BIG-REQUESTS
    [ 20.737] Initializing built-in extension SYNC
    [ 20.737] Initializing built-in extension XKEYBOARD
    [ 20.738] Initializing built-in extension XC-MISC
    [ 20.738] Initializing built-in extension SECURITY
    [ 20.738] Initializing built-in extension XINERAMA
    [ 20.738] Initializing built-in extension XFIXES
    [ 20.738] Initializing built-in extension RENDER
    [ 20.738] Initializing built-in extension RANDR
    [ 20.738] Initializing built-in extension COMPOSITE
    [ 20.738] Initializing built-in extension DAMAGE
    [ 20.738] Initializing built-in extension MIT-SCREEN-SAVER
    [ 20.738] Initializing built-in extension DOUBLE-BUFFER
    [ 20.739] Initializing built-in extension RECORD
    [ 20.739] Initializing built-in extension DPMS
    [ 20.739] Initializing built-in extension Present
    [ 20.739] Initializing built-in extension DRI3
    [ 20.739] Initializing built-in extension X-Resource
    [ 20.739] Initializing built-in extension XVideo
    [ 20.739] Initializing built-in extension XVideo-MotionCompensation
    [ 20.739] Initializing built-in extension XFree86-VidModeExtension
    [ 20.739] Initializing built-in extension XFree86-DGA
    [ 20.739] Initializing built-in extension XFree86-DRI
    [ 20.740] Initializing built-in extension DRI2
    [ 20.740] (II) "glx" will be loaded by default.
    [ 20.740] (II) LoadModule: "glx"
    [ 20.740] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 20.740] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 20.740] compiled for 6.9.0, module version = 1.0.0
    [ 20.740] Loading extension GLX
    [ 20.740] (II) LoadModule: "fglrx"
    [ 20.740] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 20.757] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
    [ 20.757] compiled for 1.4.99.906, module version = 14.30.4
    [ 20.757] Module class: X.Org Video Driver
    [ 20.757] (II) Loading sub module "fglrxdrm"
    [ 20.757] (II) LoadModule: "fglrxdrm"
    [ 20.758] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 20.760] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 20.760] compiled for 1.4.99.906, module version = 14.30.4
    [ 20.760] (II) AMD Proprietary Linux Driver Version Identifier:14.30.4
    [ 20.760] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.301.1001
    [ 20.760] (II) AMD Proprietary Linux Driver Build Date: Sep 15 2014 18:11:36
    [ 20.760] (++) using VT number 2
    [ 20.762] (WW) Falling back to old probe method for fglrx
    [ 20.775] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
    [ 20.776] ukiDynamicMajor: found major device number 250
    [ 20.776] ukiDynamicMajor: found major device number 250
    [ 20.777] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 20.777] ukiOpenDevice: node name is /dev/ati/card0
    [ 20.777] ukiOpenDevice: open result is 9, (OK)
    [ 20.853] ukiOpenByBusid: ukiOpenMinor returns 9
    [ 20.853] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 20.855] (--) Chipset Supported AMD Graphics Processor (0x6818) found
    [ 20.856] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    [ 20.856] (II) fglrx(0): pEnt->device->identifier=0x22ec7f0
    [ 20.856] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
    [ 20.856] (II) fglrx(0): FB driver is not enabled
    [ 20.856] (II) Loading sub module "vgahw"
    [ 20.856] (II) LoadModule: "vgahw"
    [ 20.857] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 20.857] (II) Module vgahw: vendor="X.Org Foundation"
    [ 20.857] compiled for 1.15.2, module version = 0.1.0
    [ 20.857] ABI class: X.Org Video Driver, version 15.0
    [ 20.858] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 20.858] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 20.858] (==) fglrx(0): Default visual is TrueColor
    [ 20.858] (**) fglrx(0): Option "DPMS" "true"
    [ 20.858] (==) fglrx(0): RGB weight 888
    [ 20.858] (II) fglrx(0): Using 8 bits per RGB
    [ 20.858] (==) fglrx(0): Buffer Tiling is ON
    [ 20.858] (II) Loading sub module "fglrxdrm"
    [ 20.858] (II) LoadModule: "fglrxdrm"
    [ 20.858] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 20.858] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 20.858] compiled for 1.4.99.906, module version = 14.30.4
    [ 20.859] ukiDynamicMajor: found major device number 250
    [ 20.859] ukiDynamicMajor: found major device number 250
    [ 20.859] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 20.859] ukiOpenDevice: node name is /dev/ati/card0
    [ 20.859] ukiOpenDevice: open result is 11, (OK)
    [ 20.859] ukiOpenByBusid: ukiOpenMinor returns 11
    [ 20.859] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 20.859] (**) fglrx(0): NoAccel = NO
    [ 20.859] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
    [ 20.859] (--) fglrx(0): Chipset: "AMD Radeon HD 7800 Series" (Chipset = 0x6818)
    [ 20.859] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe217)
    [ 20.859] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
    [ 20.859] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
    [ 20.859] (--) fglrx(0): MMIO registers at 0xf7e00000
    [ 20.859] (--) fglrx(0): I/O port at 0x0000e000
    [ 20.859] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 20.860] (II) fglrx(0): AC Adapter is used
    [ 20.861] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    [ 20.939] (II) Loading sub module "vbe"
    [ 20.939] (II) LoadModule: "vbe"
    [ 20.939] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [ 20.940] (II) Module vbe: vendor="X.Org Foundation"
    [ 20.940] compiled for 1.15.2, module version = 1.1.0
    [ 20.940] ABI class: X.Org Video Driver, version 15.0
    [ 20.940] (II) fglrx(0): VESA BIOS detected
    [ 20.940] (II) fglrx(0): VESA VBE Version 3.0
    [ 20.940] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    [ 20.940] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
    [ 20.940] (II) fglrx(0): VESA VBE OEM Software Rev: 15.17
    [ 20.940] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
    [ 20.940] (II) fglrx(0): VESA VBE OEM Product: PITCAIRN
    [ 20.940] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    [ 20.940] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
    [ 20.940] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
    [ 20.940] (II) fglrx(0): PCIE card detected
    [ 20.940] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [ 20.940] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [ 20.940] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
    [ 20.940] (II) fglrx(0): RandR 1.2 support is enabled!
    [ 20.940] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [ 20.940] (II) Loading sub module "fb"
    [ 20.940] (II) LoadModule: "fb"
    [ 20.941] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 20.942] (II) Module fb: vendor="X.Org Foundation"
    [ 20.942] compiled for 1.15.2, module version = 1.0.0
    [ 20.942] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 20.942] (II) fglrx(0): EDID Management option: EDID Management is enabled
    [ 20.942] (II) Loading sub module "ddc"
    [ 20.942] (II) LoadModule: "ddc"
    [ 20.942] (II) Module "ddc" already built-in
    [ 21.049] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
    [ 21.049] (II) fglrx(0): Output DFP2 has no monitor section
    [ 21.049] (II) fglrx(0): Output DFP3 has no monitor section
    [ 21.049] (II) fglrx(0): Output DFP4 has no monitor section
    [ 21.049] (II) fglrx(0): Output DFP5 has no monitor section
    [ 21.049] (II) fglrx(0): Output DFP6 has no monitor section
    [ 21.049] (II) fglrx(0): Output DFP7 has no monitor section
    [ 21.049] (II) fglrx(0): Output DFP8 has no monitor section
    [ 21.049] (II) fglrx(0): Output DFP9 has no monitor section
    [ 21.049] (II) fglrx(0): Output DFP10 has no monitor section
    [ 21.049] (II) fglrx(0): Output CRT1 has no monitor section
    [ 21.049] (II) Loading sub module "ddc"
    [ 21.049] (II) LoadModule: "ddc"
    [ 21.049] (II) Module "ddc" already built-in
    [ 21.050] (II) fglrx(0): Connected Display0: CRT1
    [ 21.050] (II) fglrx(0): Display0 EDID data ---------------------------
    [ 21.050] (II) fglrx(0): Manufacturer: NEC Model: 6733 Serial#: 16843009
    [ 21.050] (II) fglrx(0): Year: 2008 Week: 36
    [ 21.050] (II) fglrx(0): EDID Version: 1.3
    [ 21.050] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    [ 21.050] (II) fglrx(0): Sync: Separate
    [ 21.050] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
    [ 21.050] (II) fglrx(0): Gamma: 2.20
    [ 21.050] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 21.050] (II) fglrx(0): First detailed timing is preferred mode
    [ 21.050] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 21.050] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 21.050] (II) fglrx(0): Supported established timings:
    [ 21.050] (II) fglrx(0): 720x400@70Hz
    [ 21.050] (II) fglrx(0): 640x480@60Hz
    [ 21.050] (II) fglrx(0): 640x480@67Hz
    [ 21.050] (II) fglrx(0): 640x480@72Hz
    [ 21.050] (II) fglrx(0): 640x480@75Hz
    [ 21.050] (II) fglrx(0): 800x600@56Hz
    [ 21.050] (II) fglrx(0): 800x600@60Hz
    [ 21.050] (II) fglrx(0): 800x600@72Hz
    [ 21.050] (II) fglrx(0): 800x600@75Hz
    [ 21.050] (II) fglrx(0): 832x624@75Hz
    [ 21.050] (II) fglrx(0): 1024x768@60Hz
    [ 21.050] (II) fglrx(0): 1024x768@70Hz
    [ 21.050] (II) fglrx(0): 1024x768@75Hz
    [ 21.050] (II) fglrx(0): 1280x1024@75Hz
    [ 21.050] (II) fglrx(0): 1152x864@75Hz
    [ 21.050] (II) fglrx(0): Manufacturer's mask: 0
    [ 21.050] (II) fglrx(0): Supported standard timings:
    [ 21.050] (II) fglrx(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 21.050] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 21.050] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 21.050] (II) fglrx(0): #3: hsize: 1360 vsize 765 refresh: 60 vid: 49291
    [ 21.050] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 21.050] (II) fglrx(0): #5: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
    [ 21.050] (II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 21.050] (II) fglrx(0): #7: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 21.050] (II) fglrx(0): Supported detailed timing:
    [ 21.050] (II) fglrx(0): clock: 146.2 MHz Image Size: 474 x 296 mm
    [ 21.050] (II) fglrx(0): h_active: 1680 h_sync: 1960 h_sync_end 2136 h_blank_end 2240 h_border: 0
    [ 21.050] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
    [ 21.050] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
    [ 21.050] (II) fglrx(0): Monitor name: LCD224WM
    [ 21.050] (II) fglrx(0): Serial No: 89104229TB
    [ 21.050] (II) fglrx(0): EDID (in hex):
    [ 21.050] (II) fglrx(0): 00ffffffffffff0038a3336701010101
    [ 21.050] (II) fglrx(0): 24120103082f1e78eaee95a3544c9926
    [ 21.050] (II) fglrx(0): 0f5054bfef8081c0814081808bc09500
    [ 21.050] (II) fglrx(0): 9040b300714f21399030621a274018b0
    [ 21.050] (II) fglrx(0): 3640da281100001c000000fd00384b1f
    [ 21.050] (II) fglrx(0): 5311000a202020202020000000fc004c
    [ 21.050] (II) fglrx(0): 4344323234574d0a20202020000000ff
    [ 21.050] (II) fglrx(0): 00383931303432323954420a202000c2
    [ 21.050] (II) fglrx(0): End of Display0 EDID data --------------------
    [ 21.050] (II) fglrx(0): Dynamic Surface Resizing Enabled
    [ 21.050] (II) fglrx(0): EDID for output DFP1
    [ 21.050] (II) fglrx(0): EDID for output DFP2
    [ 21.050] (II) fglrx(0): EDID for output DFP3
    [ 21.050] (II) fglrx(0): EDID for output DFP4
    [ 21.050] (II) fglrx(0): EDID for output DFP5
    [ 21.050] (II) fglrx(0): EDID for output DFP6
    [ 21.050] (II) fglrx(0): EDID for output DFP7
    [ 21.050] (II) fglrx(0): EDID for output DFP8
    [ 21.050] (II) fglrx(0): EDID for output DFP9
    [ 21.050] (II) fglrx(0): EDID for output DFP10
    [ 21.050] (II) fglrx(0): EDID for output CRT1
    [ 21.050] (II) fglrx(0): Manufacturer: NEC Model: 6733 Serial#: 16843009
    [ 21.050] (II) fglrx(0): Year: 2008 Week: 36
    [ 21.050] (II) fglrx(0): EDID Version: 1.3
    [ 21.050] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    [ 21.050] (II) fglrx(0): Sync: Separate
    [ 21.050] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
    [ 21.050] (II) fglrx(0): Gamma: 2.20
    [ 21.050] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 21.050] (II) fglrx(0): First detailed timing is preferred mode
    [ 21.050] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 21.050] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 21.050] (II) fglrx(0): Supported established timings:
    [ 21.050] (II) fglrx(0): 720x400@70Hz
    [ 21.050] (II) fglrx(0): 640x480@60Hz
    [ 21.050] (II) fglrx(0): 640x480@67Hz
    [ 21.050] (II) fglrx(0): 640x480@72Hz
    [ 21.050] (II) fglrx(0): 640x480@75Hz
    [ 21.050] (II) fglrx(0): 800x600@56Hz
    [ 21.050] (II) fglrx(0): 800x600@60Hz
    [ 21.050] (II) fglrx(0): 800x600@72Hz
    [ 21.050] (II) fglrx(0): 800x600@75Hz
    [ 21.050] (II) fglrx(0): 832x624@75Hz
    [ 21.050] (II) fglrx(0): 1024x768@60Hz
    [ 21.050] (II) fglrx(0): 1024x768@70Hz
    [ 21.050] (II) fglrx(0): 1024x768@75Hz
    [ 21.050] (II) fglrx(0): 1280x1024@75Hz
    [ 21.050] (II) fglrx(0): 1152x864@75Hz
    [ 21.050] (II) fglrx(0): Manufacturer's mask: 0
    [ 21.050] (II) fglrx(0): Supported standard timings:
    [ 21.050] (II) fglrx(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 21.050] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 21.050] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 21.050] (II) fglrx(0): #3: hsize: 1360 vsize 765 refresh: 60 vid: 49291
    [ 21.050] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 21.050] (II) fglrx(0): #5: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
    [ 21.050] (II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 21.050] (II) fglrx(0): #7: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 21.050] (II) fglrx(0): Supported detailed timing:
    [ 21.050] (II) fglrx(0): clock: 146.2 MHz Image Size: 474 x 296 mm
    [ 21.050] (II) fglrx(0): h_active: 1680 h_sync: 1960 h_sync_end 2136 h_blank_end 2240 h_border: 0
    [ 21.050] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
    [ 21.050] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
    [ 21.050] (II) fglrx(0): Monitor name: LCD224WM
    [ 21.050] (II) fglrx(0): Serial No: 89104229TB
    [ 21.050] (II) fglrx(0): EDID (in hex):
    [ 21.050] (II) fglrx(0): 00ffffffffffff0038a3336701010101
    [ 21.050] (II) fglrx(0): 24120103082f1e78eaee95a3544c9926
    [ 21.050] (II) fglrx(0): 0f5054bfef8081c0814081808bc09500
    [ 21.050] (II) fglrx(0): 9040b300714f21399030621a274018b0
    [ 21.050] (II) fglrx(0): 3640da281100001c000000fd00384b1f
    [ 21.050] (II) fglrx(0): 5311000a202020202020000000fc004c
    [ 21.050] (II) fglrx(0): 4344323234574d0a20202020000000ff
    [ 21.050] (II) fglrx(0): 00383931303432323954420a202000c2
    [ 21.050] (II) fglrx(0): Printing probed modes for output CRT1
    [ 21.051] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1960 2136 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
    [ 21.051] (II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1376 1488 1800 800 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "1152x864"x60.0 146.25 1152 1960 2136 2240 864 1053 1059 1089 -hsync +vsync (65.3 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
    [ 21.051] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21.051] (II) fglrx(0): Output DFP1 disconnected
    [ 21.051] (II) fglrx(0): Output DFP2 disconnected
    [ 21.051] (II) fglrx(0): Output DFP3 disconnected
    [ 21.051] (II) fglrx(0): Output DFP4 disconnected
    [ 21.051] (II) fglrx(0): Output DFP5 disconnected
    [ 21.051] (II) fglrx(0): Output DFP6 disconnected
    [ 21.051] (II) fglrx(0): Output DFP7 disconnected
    [ 21.051] (II) fglrx(0): Output DFP8 disconnected
    [ 21.051] (II) fglrx(0): Output DFP9 disconnected
    [ 21.051] (II) fglrx(0): Output DFP10 disconnected
    [ 21.051] (II) fglrx(0): Output CRT1 connected
    [ 21.051] (II) fglrx(0): Using exact sizes for initial modes
    [ 21.051] (II) fglrx(0): Output CRT1 using initial mode 1680x1050
    [ 21.051] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 21.051] (II) fglrx(0): DPI set to (96, 96)
    [ 21.051] (II) fglrx(0): Eyefinity capable adapter detected.
    [ 21.051] (II) fglrx(0): Adapter AMD Radeon HD 7800 Series has 6 configurable heads and 1 displays connected.
    [ 21.051] (==) fglrx(0): PseudoColor visuals disabled
    [ 21.051] (II) Loading sub module "ramdac"
    [ 21.051] (II) LoadModule: "ramdac"
    [ 21.051] (II) Module "ramdac" already built-in
    [ 21.051] (==) fglrx(0): NoDRI = NO
    [ 21.051] (==) fglrx(0): Capabilities: 0x00000000
    [ 21.051] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [ 21.051] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [ 21.051] (==) fglrx(0): UseFastTLS=0
    [ 21.051] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
    [ 21.051] (--) Depth 24 pixmap format is 32 bpp
    [ 21.051] Loading extension ATIFGLRXDRI
    [ 21.051] (II) fglrx(0): doing swlDriScreenInit
    [ 21.051] (II) fglrx(0): swlDriScreenInit for fglrx driver
    [ 21.051] ukiDynamicMajor: found major device number 250
    [ 21.051] ukiDynamicMajor: found major device number 250
    [ 21.051] ukiDynamicMajor: found major device number 250
    [ 21.051] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 21.051] ukiOpenDevice: node name is /dev/ati/card0
    [ 21.051] ukiOpenDevice: open result is 12, (OK)
    [ 21.051] ukiOpenByBusid: ukiOpenMinor returns 12
    [ 21.051] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 21.051] (II) fglrx(0): [uki] DRM interface version 1.0
    [ 21.051] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
    [ 21.051] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
    [ 21.051] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7facb602b000
    [ 21.051] (II) fglrx(0): [uki] framebuffer handle = 0x3000
    [ 21.051] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [ 21.051] (II) fglrx(0): swlDriScreenInit done
    [ 21.051] (II) fglrx(0): Kernel Module Version Information:
    [ 21.051] (II) fglrx(0): Name: fglrx
    [ 21.051] (II) fglrx(0): Version: 14.30.4
    [ 21.051] (II) fglrx(0): Date: Sep 15 2014
    [ 21.051] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
    [ 21.051] (II) fglrx(0): Kernel Module version matches driver.
    [ 21.051] (II) fglrx(0): Kernel Module Build Time Information:
    [ 21.051] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.16.4-1-ARCH
    [ 21.051] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
    [ 21.051] (II) fglrx(0): Build-Kernel __SMP__: yes
    [ 21.051] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    [ 21.051] (II) fglrx(0): [uki] register handle = 0x00004000
    [ 21.053] (II) fglrx(0): Display width adjusted to to 1792 due to alignment constraints
    [ 21.053] (II) fglrx(0): DRI initialization successfull
    [ 21.054] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x010a0000
    [ 21.056] (==) fglrx(0): Backing store enabled
    [ 21.056] Loading extension FGLRXEXTENSION
    [ 21.056] (**) fglrx(0): DPMS enabled
    [ 21.056] (II) fglrx(0): Initialized in-driver Xinerama extension
    [ 21.056] (**) fglrx(0): Textured Video is enabled.
    [ 21.056] (II) LoadModule: "glesx"
    [ 21.056] (II) Loading /usr/lib/xorg/modules/glesx.so
    [ 21.069] (II) Module glesx: vendor="X.Org Foundation"
    [ 21.070] compiled for 1.4.99.906, module version = 1.0.0
    [ 21.070] Loading extension GLESX
    [ 21.070] (II) fglrx(0): GLESX enableFlags = 8784
    [ 21.070] (II) fglrx(0): GLESX is enabled
    [ 21.070] (II) LoadModule: "amdxmm"
    [ 21.070] (II) Loading /usr/lib/xorg/modules/amdxmm.so
    [ 21.072] (II) Module amdxmm: vendor="X.Org Foundation"
    [ 21.072] compiled for 1.4.99.906, module version = 2.0.0
    [ 21.082] Loading extension AMDXVOPL
    [ 21.082] Loading extension AMDXVBA
    [ 21.083] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
    [ 21.084] (II) fglrx(0): Enable composite support successfully
    [ 21.084] (WW) fglrx(0): Option "VendorName" is not used
    [ 21.084] (WW) fglrx(0): Option "ModelName" is not used
    [ 21.084] (II) fglrx(0): X context handle = 0x1
    [ 21.084] (II) fglrx(0): [DRI] installation complete
    [ 21.084] (==) fglrx(0): Silken mouse enabled
    [ 21.085] (==) fglrx(0): Using HW cursor of display infrastructure!
    [ 21.085] (II) fglrx(0): LPT is disabled by configure option
    [ 21.085] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 21.199] (--) RandR disabled
    [ 21.202] ukiDynamicMajor: found major device number 250
    [ 21.202] ukiDynamicMajor: found major device number 250
    [ 21.202] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 21.202] ukiOpenDevice: node name is /dev/ati/card0
    [ 21.202] ukiOpenDevice: open result is 13, (OK)
    [ 21.202] ukiOpenByBusid: ukiOpenMinor returns 13
    [ 21.202] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 21.204] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
    [ 21.235] ukiDynamicMajor: found major device number 250
    [ 21.235] ukiDynamicMajor: found major device number 250
    [ 21.235] ukiDynamicMajor: found major device number 250
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card0
    [ 21.235] ukiOpenDevice: open result is 14, (OK)
    [ 21.235] ukiGetBusid returned 'PCI:1:0:0'
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card1
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: Open failed
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card2
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: Open failed
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card3
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: Open failed
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card4
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: Open failed
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card5
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: Open failed
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card6
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: Open failed
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card7
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: Open failed
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card8
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: Open failed
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card9
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: Open failed
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card10
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: Open failed
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card11
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: Open failed
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card12
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: Open failed
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card13
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: Open failed
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card14
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: Open failed
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card15
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: open result is -1, (No such device)
    [ 21.235] ukiOpenDevice: Open failed
    [ 21.235] ukiDynamicMajor: found major device number 250
    [ 21.235] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 21.235] ukiOpenDevice: node name is /dev/ati/card0
    [ 21.235] ukiOpenDevice: open result is 14, (OK)
    [ 21.235] ukiOpenByBusid: ukiOpenMinor returns 14
    [ 21.235] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 21.330] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
    [ 21.331] ukiDynamicMajor: found major device number 250
    [ 21.331] ukiDynamicMajor: found major device number 250
    [ 21.331] ukiDynamicMajor: found major device number 250
    [ 21.331] ukiOpenDevice: node name is /dev/ati/card0
    [ 21.331] ukiOpenDevice: open result is 15, (OK)
    [ 21.331] ukiGetBusid returned 'PCI:1:0:0'
    [ 21.331] ukiOpenDevice: node name is /dev/ati/card1
    [ 21.331] ukiOpenDevice: open result is -1, (No such device)
    [ 21.331] ukiOpenDevice: open result is -1, (No such device)
    [ 21.331] ukiOpenDevice: Open failed
    [ 21.331] ukiOpenDevice: node name is /dev/ati/card2
    [ 21.331] ukiOpenDevice: open result is -1, (No such device)
    [ 21.331] ukiOpenDevice: open result is -1, (No such device)
    [ 21.331] ukiOpenDevice: Open failed
    [ 21.331] ukiOpenDevice: node name is /dev/ati/card3
    [ 21.331] ukiOpenDevice: open result is -1, (No such device)
    [ 21.331] ukiOpenDevice: open result is -1, (No such device)
    [ 21.331] ukiOpenDevice: Open failed
    [ 21.331] ukiOpenDevice: node name is /dev/ati/card4
    [ 21.331] ukiOpenDevice: open result is -1, (No such device)
    [ 21.331] ukiOpenDevice: open result is -1, (No such device)
    [ 21.331] ukiOpenDevice: Open failed
    [ 21.331] ukiOpenDevice: node name is /dev/ati/card5
    [ 21.331] ukiOpenDevice: open result is -1, (No such device)
    [ 21.331] ukiOpenDevice: open result is -1, (No such device)
    [ 21.331] ukiOpenDevice: Open failed
    [ 21.331] ukiOpenDevice: node name is /dev/ati/card6
    [ 21.331] ukiOpenDevice: open result is -1, (No such device)
    [ 21.331] ukiOpenDevice: open result is -1, (No such device)
    [ 21.331] ukiOpenDevice: Open failed
    [ 21.331] ukiOpenDevice: node name is /dev/ati/card7
    [ 21.331] ukiOpenDevice: open result is -1, (No such device)
    [ 21.331] ukiOpenDevice: open result is -1, (No such device)
    [ 21.331] ukiOpenDevice: Open failed
    [ 21.331] ukiOpenDevice: node name is /dev/ati/card8
    [ 21.331] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: Open failed
    [ 21.332] ukiOpenDevice: node name is /dev/ati/card9
    [ 21.332] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: Open failed
    [ 21.332] ukiOpenDevice: node name is /dev/ati/card10
    [ 21.332] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: Open failed
    [ 21.332] ukiOpenDevice: node name is /dev/ati/card11
    [ 21.332] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: Open failed
    [ 21.332] ukiOpenDevice: node name is /dev/ati/card12
    [ 21.332] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: Open failed
    [ 21.332] ukiOpenDevice: node name is /dev/ati/card13
    [ 21.332] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: Open failed
    [ 21.332] ukiOpenDevice: node name is /dev/ati/card14
    [ 21.332] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: Open failed
    [ 21.332] ukiOpenDevice: node name is /dev/ati/card15
    [ 21.332] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: open result is -1, (No such device)
    [ 21.332] ukiOpenDevice: Open failed
    [ 21.332] ukiDynamicMajor: found major device number 250
    [ 21.332] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 21.332] ukiOpenDevice: node name is /dev/ati/card0
    [ 21.332] ukiOpenDevice: open result is 15, (OK)
    [ 21.332] ukiOpenByBusid: ukiOpenMinor returns 15
    [ 21.332] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 21.360] (II) fglrx(0): OverDrive5 Detected!
    [ 21.362] (II) fglrx(0): Setting screen physical size to 444 x 277
    [ 21.420] (II) config/udev: Adding input device Power Button (/dev/input/event5)
    [ 21.420] (**) Power Button: Applying InputClass "system-keyboard"
    [ 21.420] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 21.420] (II) LoadModule: "evdev"
    [ 21.421] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 21.423] (II) Module evdev: vendor="X.Org Foundation"
    [ 21.423] compiled for 1.15.1, module version = 2.9.0
    [ 21.423] Module class: X.Org XInput Driver
    [ 21.423] ABI class: X.Org XInput driver, version 20.0
    [ 21.423] (II) Using input driver 'evdev' for 'Power Button'
    [ 21.423] (**) Power Button: always reports core events
    [ 21.423] (**) evdev: Power Button: Device: "/dev/input/event5"
    [ 21.423] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 21.423] (--) evdev: Power Button: Found keys
    [ 21.423] (II) evdev: Power Button: Configuring as keyboard
    [ 21.423] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
    [ 21.423] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 21.423] (**) Option "xkb_rules" "evdev"
    [ 21.423] (**) Option "xkb_model" "pc104"
    [ 21.423] (**) Option "xkb_layout" "pl"
    [ 21.447] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 21.447] (**) Power Button: Applying InputClass "system-keyboard"
    [ 21.447] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 21.447] (II) Using input driver 'evdev' for 'Power Button'
    [ 21.447] (**) Power Button: always reports core events
    [ 21.447] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 21.447] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 21.447] (--) evdev: Power Button: Found keys
    [ 21.447] (II) evdev: Power Button: Configuring as keyboard
    [ 21.447] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event4"
    [ 21.447] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 21.447] (**) Option "xkb_rules" "evdev"
    [ 21.447] (**) Option "xkb_model" "pc104"
    [ 21.447] (**) Option "xkb_layout" "pl"
    [ 21.448] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event8)
    [ 21.448] (II) No input driver specified, ignoring this device.
    [ 21.448] (II) This device may have been added with another device file.
    [ 21.448] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event9)
    [ 21.448] (II) No input driver specified, ignoring this device.
    [ 21.448] (II) This device may have been added with another device file.
    [ 21.448] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event10)
    [ 21.448] (II) No input driver specified, ignoring this device.
    [ 21.448] (II) This device may have been added with another device file.
    [ 21.448] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event11)
    [ 21.448] (II) No input driver specified, ignoring this device.
    [ 21.448] (II) This device may have been added with another device file.
    [ 21.449] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event12)
    [ 21.449] (II) No input driver specified, ignoring this device.
    [ 21.449] (II) This device may have been added with another device file.
    [ 21.449] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event7)
    [ 21.449] (II) No input driver specified, ignoring this device.
    [ 21.449] (II) This device may have been added with another device file.
    [ 21.449] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event13)
    [ 21.449] (II) No input driver specified, ignoring this device.
    [ 21.449] (II) This device may have been added with another device file.
    [ 21.449] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event14)
    [ 21.449] (II) No input driver specified, ignoring this device.
    [ 21.449] (II) This device may have been added with another device file.
    [ 21.449] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event15)
    [ 21.449] (II) No input driver specified, ignoring this device.
    [ 21.449] (II) This device may have been added with another device file.
    [ 21.450] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event16)
    [ 21.450] (II) No input driver specified, ignoring this device.
    [ 21.450] (II) This device may have been added with another device file.
    [ 21.450] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event17)
    [ 21.450] (II) No input driver specified, ignoring this device.
    [ 21.450] (II) This device may have been added with another device file.
    [ 21.450] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event18)
    [ 21.450] (II) No input driver specified, ignoring this device.
    [ 21.450] (II) This device may have been added with another device file.
    [ 21.450] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event19)
    [ 21.450] (II) No input driver specified, ignoring this device.
    [ 21.450] (II) This device may have been added with another device file.
    [ 21.450] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event20)
    [ 21.450] (II) No input driver specified, ignoring this device.
    [ 21.450] (II) This device may have been added with another device file.
    [ 21.451] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/event0)
    [ 21.451] (**) Logitech Gaming Mouse G502: Applying InputClass "evdev pointer catchall"
    [ 21.451] (II) Using input driver 'evdev' for 'Logitech Gaming Mouse G502'
    [ 21.451] (**) Logitech Gaming Mouse G502: always reports core events
    [ 21.451] (**) evdev: Logitech Gaming Mouse G502: Device: "/dev/input/event0"
    [ 21.451] (--) evdev: Logitech Gaming Mouse G502: Vendor 0x46d Product 0xc07d
    [ 21.451] (--) evdev: Logitech Gaming Mouse G502: Found 20 mouse buttons
    [ 21.451] (--) evdev: Logitech Gaming Mouse G502: Found scroll wheel(s)
    [ 21.451] (--) evdev: Logitech Gaming Mouse G502: Found relative axes
    [ 21.451] (--) evdev: Logitech Gaming Mouse G502: Found x and y relative axes
    [ 21.451] (II) evdev: Logitech Gaming Mouse G502: Configuring as mouse
    [ 21.451] (II) evdev: Logitech Gaming Mouse G502: Adding scrollwheel support
    [ 21.451] (**) evdev: Logitech Gaming Mouse G502: YAxisMapping: buttons 4 and 5
    [ 21.451] (**) evdev: Logitech Gaming Mouse G502: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 21.451] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/0003:046D:C07D.0001/input/input2/event0"
    [ 21.451] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502" (type: MOUSE, id 8)
    [ 21.451] (II) evdev: Logitech Gaming Mouse G502: initialized for relative axes.
    [ 21.451] (**) Logitech Gaming Mouse G502: (accel) keeping acceleration scheme 1
    [ 21.451] (**) Logitech Gaming Mouse G502: (accel) acceleration profile 0
    [ 21.451] (**) Logitech Gaming Mouse G502: (accel) acceleration factor: 2.000
    [ 21.451] (**) Logitech Gaming Mouse G502: (accel) acceleration threshold: 4
    [ 21.451] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/mouse0)
    [ 21.452] (II) No input driver specified, ignoring this device.
    [ 21.452] (II) This device may have been added with another device file.
    [ 21.452] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/event1)
    [ 21.452] (**) Logitech Gaming Mouse G502: Applying InputClass "system-keyboard"
    [ 21.452] (**) Logitech Gaming Mouse G502: Applying InputClass "evdev keyboard catchall"
    [ 21.452] (II) Using input driver 'evdev' for 'Logitech Gaming Mouse G502'
    [ 21.452] (**) Logitech Gaming Mouse G502: always reports core events
    [ 21.452] (**) evdev: Logitech Gaming Mouse G502: Device: "/dev/input/event1"
    [ 21.452] (--) evdev: Logitech Gaming Mouse G502: Vendor 0x46d Product 0xc07d
    [ 21.452] (--) evdev: Logitech Gaming Mouse G502: Found 1 mouse buttons
    [ 21.452] (--) evdev: Logitech Gaming Mouse G502: Found scroll wheel(s)
    [ 21.452] (--) evdev: Logitech Gaming Mouse G502: Found relative axes
    [ 21.452] (II) evdev: Logitech Gaming Mouse G502: Forcing relative x/y axes to exist.
    [ 21.452] (--) evdev: Logitech Gaming Mouse G502: Found absolute axes
    [ 21.452] (II) evdev: Logitech Gaming Mouse G502: Forcing absolute x/y axes to exist.
    [ 21.452] (--) evdev: Logitech Gaming Mouse G502: Found keys
    [ 21.452] (II) evdev: Logitech Gaming Mouse G502: Configuring as mouse
    [ 21.452] (II) evdev: Logitech Gaming Mouse G502: Configuring as keyboard
    [ 21.452] (II) evdev: Logitech Gaming Mouse G502: Adding scrollwheel support
    [ 21.452] (**) evdev: Logitech Gaming Mouse G502: YAxisMapping: buttons 4 and 5
    [ 21.452] (**) evdev: Logitech Gaming Mouse G502: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 21.452] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.1/0003:046D:C07D.0002/input/input3/event1"
    [ 21.452] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502" (type: KEYBOARD, id 9)
    [ 21.452] (**) Option "xkb_rules" "evdev"
    [ 21.452] (**) Option "xkb_model" "pc104"
    [ 21.452] (**) Option "xkb_layout" "pl"
    [ 21.452] (II) evdev: Logitech Gaming Mouse G502: initialized for relative axes.
    [ 21.452] (WW) evdev: Logitech Gaming Mouse G502: ignoring absolute axes.
    [ 21.452] (**) Logitech Gaming Mouse G502: (accel) keeping acceleration scheme 1
    [ 21.452] (**) Logitech Gaming Mouse G502: (accel) acceleration profile 0
    [ 21.452] (**) Logitech Gaming Mouse G502: (accel) acceleration factor: 2.000
    [ 21.452] (**) Logitech Gaming Mouse G502: (accel) acceleration threshold: 4
    [ 21.453] (II) config/udev: Adding input device Microsoft Microsoft® SiderWinderTM X4 Keyboard (/dev/input/event2)
    [ 21.453] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: Applying InputClass "system-keyboard"
    [ 21.453] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 21.453] (II) Using input driver 'evdev' for 'Microsoft Microsoft® SiderWinderTM X4 Keyboard'
    [ 21.453] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: always reports core events
    [ 21.453] (**) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Device: "/dev/input/event2"
    [ 21.453] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Vendor 0x45e Product 0x768
    [ 21.453] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found keys
    [ 21.453] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Configuring as keyboard
    [ 21.453] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/0003:045E:0768.0003/input/input4/event2"
    [ 21.453] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SiderWinderTM X4 Keyboard" (type: KEYBOARD, id 10)
    [ 21.453] (**) Option "xkb_rules" "evdev"
    [ 21.453] (**) Option "xkb_model" "pc104"
    [ 21.453] (**) Option "xkb_layout" "pl"
    [ 21.454] (II) config/udev: Adding input device Microsoft Microsoft® SiderWinderTM X4 Keyboard (/dev/input/event3)
    [ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: Applying InputClass "system-keyboard"
    [ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 21.454] (II) Using input driver 'evdev' for 'Microsoft Microsoft® SiderWinderTM X4 Keyboard'
    [ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: always reports core events
    [ 21.454] (**) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Device: "/dev/input/event3"
    [ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Vendor 0x45e Product 0x768
    [ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found 1 mouse buttons
    [ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found scroll wheel(s)
    [ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found relative axes
    [ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Forcing relative x/y axes to exist.
    [ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found absolute axes
    [ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Forcing absolute x/y axes to exist.
    [ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found keys
    [ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Configuring as mouse
    [ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Configuring as keyboard
    [ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Adding scrollwheel support
    [ 21.454] (**) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: YAxisMapping: buttons 4 and 5
    [ 21.454] (**) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 21.454] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/0003:045E:0768.0004/input/input5/event3"
    [ 21.454] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SiderWinderTM X4 Keyboard" (type: KEYBOARD, id 11)
    [ 21.454] (**) Option "xkb_rules" "evdev"
    [ 21.454] (**) Option "xkb_model" "pc104"
    [ 21.454] (**) Option "xkb_layout" "pl"
    [ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: initialized for relative axes.
    [ 21.454] (WW) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: ignoring absolute axes.
    [ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: (accel) keeping acceleration scheme 1
    [ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: (accel) acceleration profile 0
    [ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: (accel) acceleration factor: 2.000
    [ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: (accel) acceleration threshold: 4
    [ 21.454] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
    [ 21.454] (II) No input driver specified, ignoring this device.
    [ 21.454] (II) This device may have been added with another device file.
    [ 21.458] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
    [ 22.742] (II) fglrx(0): EDID vendor "NEC", prod id 26419
    [ 22.742] (II) fglrx(0): Using EDID range info for horizontal sync
    [ 22.742] (II) fglrx(0): Using EDID range info for vertical refresh
    [ 22.742] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 22.742] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1960 2136 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
    [ 22.742] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "1366x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
    [ 22.742] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
    [ 24.160] (II) fglrx(0): EDID vendor "NEC", prod id 26419
    [ 24.160] (II) fglrx(0): Using hsync ranges from config file
    [ 24.160] (II) fglrx(0): Using vrefresh ranges from config file
    [ 24.160] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 24.160] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1960 2136 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
    [ 24.160] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 24.160] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 24.160] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 24.160] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 24.160] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "1366x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
    [ 24.161] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
    EDIT
    Tried symlinking
    /usr/lib64/dri
    to
    /usr/X11R6/lib64/modules
    And made that error in Xorg log disappear. However, gdm is still not working. I'm getting stuck at
    [ OK ] Reached target Graphical Interface.
    I can still log with other tty and startx manually.
    Output of
    systemctl status gdm
    ● gdm.service - GNOME Display Manager
    Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
    Active: active (running) since wto 2014-10-21 16:10:03 CEST; 6min ago
    Main PID: 276 (gdm)
    CGroup: /system.slice/gdm.service
    └─276 /usr/bin/gdm
    paź 21 16:10:04 ASRock-P67-Pro3 gdm[276]: GLib-GObject: invalid unclassed pointer in cast to 'GdmSimpleSlave'
    paź 21 16:10:04 ASRock-P67-Pro3 gdm[276]: GLib-GObject: invalid unclassed pointer in cast to 'GdmSimpleSlave'
    paź 21 16:10:04 ASRock-P67-Pro3 gdm[276]: GLib-GObject: invalid unclassed pointer in cast to 'GdmSimpleSlave'
    paź 21 16:10:04 ASRock-P67-Pro3 gdm[276]: GLib-GObject: invalid unclassed pointer in cast to 'GdmSimpleSlave'
    paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[313]: Process 312 (Xorg) of user 0 dumped core.
    paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[309]: Process 308 (Xorg) of user 0 dumped core.
    paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[303]: Process 288 (Xorg) of user 0 dumped core.
    paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[311]: Process 310 (Xorg) of user 0 dumped core.
    paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[307]: Process 306 (Xorg) of user 0 dumped core.
    paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[317]: Process 316 (Xorg) of user 0 dumped core.
    and content of
    Xorg.0.log
    [ 62.476]
    X.Org X Server 1.15.2
    Release Date: 2014-06-27
    [ 62.476] X Protocol Version 11, Revision 0
    [ 62.476] Build Operating System: Linux 3.15.1-1-ARCH x86_64
    [ 62.476] Current Operating System: Linux ASRock-P67-Pro3 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
    [ 62.476] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw nomodeset initrd=../initramfs-linux.img
    [ 62.477] Build Date: 27 June 2014 07:32:26PM
    [ 62.477]
    [ 62.477] Current version of pixman: 0.32.6
    [ 62.477] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 62.477] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 62.478] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 21 16:11:00 2014
    [ 62.478] (==) Using config file: "/etc/X11/xorg.conf"
    [ 62.478] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 62.478] (==) ServerLayout "aticonfig Layout"
    [ 62.478] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 62.478] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 62.479] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 62.479] (==) Automatically adding devices
    [ 62.479] (==) Automatically enabling devices
    [ 62.479] (==) Automatically adding GPU devices
    [ 62.479] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 62.479] Entry deleted from font path.
    [ 62.479] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 62.479] Entry deleted from font path.
    [ 62.479] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 62.479] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 62.479] Entry deleted from font path.
    [ 62.479] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 62.479] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 62.479] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 62.479] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 62.479] (II) Loader magic: 0x811cc0
    [ 62.479] (II) Module ABI versions:
    [ 62.479] X.Org ANSI C Emulation: 0.4
    [ 62.479] X.Org Video Driver: 15.0
    [ 62.479] X.Org XInput driver : 20.0
    [ 62.479] X.Org Server Extension : 8.0
    [ 62.480] (--) PCI:*(0:1:0:0) 1002:6818:174b:e217 rev 0, Mem @ 0xe0000000/268435456, 0xf7e00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
    [ 62.480] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 62.480] Initializing built-in extension Generic Event Extension
    [ 62.480] Initializing built-in extension SHAPE
    [ 62.480] Initializing built-in extension MIT-SHM
    [ 62.480] Initializing built-in extension XInputExtension
    [ 62.480] Initializing built-in extension XTEST
    [ 62.481] Initializing built-in extension BIG-REQUESTS
    [ 62.481] Initializing built-in extension SYNC
    [ 62.481] Initializing built-in extension XKEYBOARD
    [ 62.481] Initializing built-in extension XC-MISC
    [ 62.481] Initializing built-in extension SECURITY
    [ 62.481] Initializing built-in extension XINERAMA
    [ 62.481] Initializing built-in extension XFIXES
    [ 62.481] Initializing built-in extension RENDER
    [ 62.481] Initializing built-in extension RANDR
    [ 62.481] Initializing built-in extension COMPOSITE
    [ 62.482] Initializing built-in extension DAMAGE
    [ 62.482] Initializing built-in extension MIT-SCREEN-SAVER
    [ 62.482] Initializing built-in extension DOUBLE-BUFFER
    [ 62.482] Initializing built-in extension RECORD
    [ 62.482] Initializing built-in extension DPMS
    [ 62.482] Initializing built-in extension Present
    [ 62.482] Initializing built-in extension DRI3
    [ 62.482] Initializing built-in extension X-Resource
    [ 62.482] Initializing built-in extension XVideo
    [ 62.482] Initializing built-in extension XVideo-MotionCompensation
    [ 62.483] Initializing built-in extension XFree86-VidModeExtension
    [ 62.483] Initializing built-in extension XFree86-DGA
    [ 62.483] Initializing built-in extension XFree86-DRI
    [ 62.483] Initializing built-in extension DRI2
    [ 62.483] (II) "glx" will be loaded by default.
    [ 62.483] (II) LoadModule: "glx"
    [ 62.483] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 62.483] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 62.483] compiled for 6.9.0, module version = 1.0.0
    [ 62.483] Loading extension GLX
    [ 62.484] (II) LoadModule: "fglrx"
    [ 62.484] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 62.501] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
    [ 62.501] compiled for 1.4.99.906, module version = 14.30.4
    [ 62.501] Module class: X.Org Video Driver
    [ 62.501] (II) Loading sub module "fglrxdrm"
    [ 62.501] (II) LoadModule: "fglrxdrm"
    [ 62.501] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 62.504] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 62.504] compiled for 1.4.99.906, module version = 14.30.4
    [ 62.504] (II) AMD Proprietary Linux Driver Version Identifier:14.30.4
    [ 62.504] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.301.1001
    [ 62.504] (II) AMD Proprietary Linux Driver Build Date: Sep 15 2014 18:11:36
    [ 62.504] (++) using VT number 3
    [ 62.505] (WW) Falling back to old probe method for fglrx
    [ 62.519] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
    [ 62.521] ukiDynamicMajor: found major device number 250
    [ 62.521] ukiDynamicMajor: found major device number 250
    [ 62.521] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 62.521] ukiOpenDevice: node name is /dev/ati/card0
    [ 62.521] ukiOpenDevice: open result is 9, (OK)
    [ 62.605] ukiOpenByBusid: ukiOpenMinor returns 9
    [ 62.605] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 62.607] (--) Chipset Supported AMD Graphics Processor (0x6818) found
    [ 62.607] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    [ 62.608] (II) fglrx(0): pEnt->device->identifier=0x23d17f0
    [ 62.608] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
    [ 6

  • Enhanced chapter titles on iPod seek screen - We do it - but not sure how

    OK, so I am one of a three person team that produces an enhanced podcast. We use the Chapter Tool command line utility on XML that we edit by hand (each chapter has a title, image, and link), then we upload the file to our host (libsyn), and use Pivot front end to create a feed for use in feedburner.
    So, we've noticed that after we download an enhanced episode through the iTunes store and load it on to our ipod, when you press the center button on the iPod to go to the "seek" screen (where you can use the wheel to fast forward through the the file), the chapter title is displayed just above the file location marker.
    You can see an example of this on this page we made showing our listeners what to expeect in an enhanced podcast:
    http://www.tranceportal.org/music/enhancedpodcast.htm
    This is a great feature! And we love it. However, we're not exactly sure what makes it possible. When we load our enhanced podcast onto an iPod before it's uploaded and published on our servers, we don't see this feature at all. It only appears after the file has been downloaded through iTunes.
    Does anybody know where this feature comes from? Is it part of iTunes download process? Feedburner? Pivot? Libsyn? We haven't looked deep into all these parts our podcast files are passing through yet, but thought it was worth a shot to ask here before we wasted our time doing that.
    Much thanks in advance.
    Powerbook   Mac OS X (10.4.7)  

    There's nothing special about listing on iTunes, because you never actually upload anything about your podcast to iTunes. Maybe the iPod has to have subscribed to the file as a podcast episode for it to have the Chapter titles appear. If it's just added as an m4a file, perhaps the iPod won't see that extra bit of metadata. That's one possibility--you could test it by subscribing to the podcast directly via the "Advanced" menu, choosing "Subscribe to podcast", and adding the actual podcast feed:
    http://feeds.feedburner.com/TranceTuesdayPodcast
    -S

  • Table ctrl - no screen-name - hav groupid but not visible in Loop at screen

    Hi...
    In pa30, for a pernr, of infotype 0008, we have a table control.
    In that table control, i hav to hide a field. ex: bet01
    it has value..by default it will appear on the screen...
    Now I want this value not to appear on the screen.
    in loop at screen, i am not able to find the sceen-name(Q0008-bet01 or no Q fields...)
    It loops for all the p fields..and exits the loop.
    How can I hide the q fields..
    I have tried with groupids...but, in loop at screen unable to find the groupids...so no use..
    screen name and groupid are there for this field...
    Any solution???????????

    Hi...thanks for ur reply...
    Not that helpful...
    I hav the groupID..screen-name...
    But the problem is, the loop at screen is not going through this groupid or screen-name...
    And if u have any sample code, plz share it..
    I cant modify the data coming to table control...access problem...
    If u have anyother solution, please give it..Anyways thanks once again for ur reply!
    Experts, no solution??? No alternative???
    Edited by: Veeranji Reddy on Nov 13, 2008 3:22 PM
    Edited by: Veeranji Reddy on Nov 14, 2008 5:49 AM

  • Pogogame only loading the chat but not the game and it is a firefox problem as desltop and pogo say pogo os working right

    when I go into Pogo to play my games many when load only show the chat for that game but no game appears I contacted pogo they went in said loads all the game just fine when I load on my desk top it loads ok and also when use internet explorer it loads just fine so must be a firefox glitch this is on my laptop not desk top comp did not see anything to click was on laptop I even called Dell and they tried there best to fix it and ended up saying is firefox Please can you fix this do not want to deleetfor your help firefox and go back to internet explorer as love firefox but for this problem thanks

    I have just had a confirmation from my bank that '''they''' have a problem with FF8
    They have advised clients to revert to FF3.6 until they adjust their system to run on FF8.

Maybe you are looking for