"go back" on toolbar doesn't work

The "go back" icon on my toolbar had disappeared. So I went to view and added the icon. I can see it but it is shaded and won't work. In order to view the last item I was reading, I have to go to history and choose from there which is annoying. I need to know how to activate this feature.
Thanks for your help.

Click "View" menu in the Safari menu bar and then "Customize Toolbar"
Drag the default set into the toolbar.
Click "Done"
Hope this works.
Best.

Similar Messages

Google toolbar doesn't work with Firefox. How to Fix?

The Google toolbar doesn't work with my current version of Firefox. When I went to update, the Google toolbar was removed and I can't get it back. How do I fix this so I can still use Firefox?

Google needs to update the Google Toolbar program for Firefox 5.0.
The Google Toolbar '''7.1.20110512W''' version does work pretty good in Firefox 5.0 by using the Compatibility Reporter extension. But not every feature works 100%. 
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
http://googlesystem.blogspot.com/2011/06/enable-google-toolbar-in-firefox-5.html

IC WebClient telephony toolbar doesn't work in CRM 7.0 EHP2

Hi,
I've a issue with IC webclient telephony toolbar, I comment:
After upgrading SAP CRM 7.0 to SAP CRM 7.0 EHP2, the IC webclient telephony toolbar doesn't work.
I have seen:
1.- When I use “Dial Pad” to call in CRM 7.0 EHP2 (the current version), the message is sent to another session:
_SEND(CL_SAM_SESSION_QUEUE_SENDER)
After sentence (line 28): r_queue = m_session_queue_receiver->get_queue( ).
“r_queue” is initial, for this reason the message is sent to another session.
And when running http_client->receive (line 101), the system hangs because the request is not completed.
I have seen that the response queue (r_queue) is initial because the instance of CL_SAM_SESSION_QUEUE_CNTRLER=>S_SESSION_QUEUE_RECEIVER is initial. For this reason the object is created, method: CONSTRUCTOR(CL_SAM_SESSION_QUEUE_RECEIVER), but parameter “runtime” is initial; therefore the response queue isn't generated.
2.- But, I have seen that if we have used “Dial Pad” to call in CRM 7.0 (the previous version), the message is sent to the same session:
_SEND(CL_SAM_SESSION_QUEUE_SENDER)
After sentence (line 28): r_queue = m_session_queue_receiver->get_queue( ).
The “r_queue” is equal to “s_queue”, for this reason the message is sent to the same session.
In this last case, the request is ok and the call succeeds.
In both case the request is HTTPS protocol.
Does anyone know what could it be?
Thanks and regards,
Rocio

Hi,
Perhaps SAP Note 1640673 could be applicable in this case.
Regards,
Srikishan

I turned my ipod off, and it won't turn back on. charging doesn't work and it won't be recognised by wi-fi or usb connections. How do i fix it?

i turned my ipod off, and it won't turn back on. charging doesn't work and it won't be recognised by wi-fi or usb connections. how do i fix it?

Check your cable whether it is good. If it is use the wall plug to charge at least half an hour. See how it goes.

The "Go back one page" button on the Navigation toolbar doesn't work on certain web pages.

== Issue
==
Firefox is having problems with certain web sites
== Description
==
The "Go back one page" button on the Navigation toolbar doesn't seem to work on certain pages. On clicking this button, the focus stays on the same page and does not move to the previous page. The previous page does not appear even in the right-click context menu of the Back button. However, I am able to go back one page using Internet Explorer.
== URL of affected sites
==
http://justdial.com/
http://southernrailway.gov.in/sr/indexhome.jsp
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Kaspersky URL Advisor
9.0.0.736
true
[email protected]
Java Console
6.0.14
true
Java Console
6.0.17
true
Java Console
6.0.20
true
McAfee SiteAdvisor
3.1
true
Java Quick Starter
1.0
true
[email protected]
Download Accelerator Plus (DAP) extension
9.4.0.5
true
Adblock Plus
1.2
true
DownloadHelper
4.7.3
true
FEBE
6.3.3.2
true
{4BBDD651-70CF-4821-84F8-2B918CF89CA3}
Flagfox
4.0.6
true
{1018e4d6-728f-4b20-ad56-37578a4de76b}
Lazarus: Form Recovery
2.0.5
true
[email protected]
WeatherBug
2.0.0.4
true
{3EC9C995-8072-4fc0-953E-4F30620D17F3}
WOT
20100503
true
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.importBookmarksHTML
false
browser.places.smartBookmarksVersion
2
browser.startup.homepage
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
network.cookie.prefsMigrated
true
places.last_vacuum
1276949273
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-Office Plugin for Netscape Navigator
*6.0.12.448
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Winamp Application Detector
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*Provides additional functionality on Facebook. See our web site for details.
*Shockwave Flash 10.0 r22
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Picasa plugin
*Yahoo Application State Plugin version 1.0.0.7
*3.0.40818.0
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object

Try to open the right-click context menu of the Back button and see if you can go back further.
The current active entry in that list has a bullet in front of it.
If you hover an entry in that session history list then it shows the direction by adding an arrow at the left.
You can left click an item to open it in the current tab or middle-click or Ctrl left-click an entry in that list to open that link in new tab, just like you can with other links.

Toolbar doesn't work in Browser

Hi,
I have a student on a Windows 7 operating system, with the latest version of Adobe Reader X. When she tries to view a pdf in the browser (latest Firefox or Internet Explorer) with form fields, the majority of icons on the toolbar do not work. Clicking the print icon, nothing happens. Clicking the icons to fit window width do not work. Clicking the down arrow to show next page doesn't work, etc.
Has anyone experienced this and enabled a cure?
David.

To repair do this:
1. Go to START->Control Panel->Uninstall a Program
2. Select Adobe Reader X(10.1.2) -> right-click->change> select the first option which mentions"Repair ...."
Can you make sure in the step 2 that mentions adobe reader X(10.1.2) and no other version?
Are toolbars working if you open PDF directly using Reader X?

Back facing camera doesn't work!

My back facing camera on my ipad2 doesn't work. The shutter will not open to take pics or video. I have tried rebooting iPad and resetting it and nothing works! I was hoping for an at home fix instead of sending it in cause I'm afraid to lose some photos I put on ipad2 from my computer cause I recently lost my hard drive! I can't back those ones up with i cloud or iTunes ( I don't think so anyways). Thanks, any suggestions would be greatly appreciated!

Dian-
You should take care of the photos first, before you worry about the camera. Once you get your computer repaired (or get a new one) you need to get it authorized for your Apple ID, and find a way to back up the iPad without erasing it.
Search for an Apple Authorized Repair Center near you. They should be able to advise you on how to save your photos. (I see that there is Capitol Macintosh in Lansing, MI.)
Fred

Google toolbar doesn't work in v5. Can I rollback to earlier version of firefox?

I'd like to rollback to my previous version of Firefox so I can use my Google toolbar.
It doesn't work in v5 and although Google are working on it, it may take a while.
How do I do that? Indeed, is it possible?
I'm running Windows 7.

Google needs to update the Google Toolbar program for Firefox 5.0.
The Google Toolbar '''7.1.20110512W''' version does work in Firefox 5.0 by using the Compatibility Reporter extension, I tried it myself due to the large number of postings about GTB problems. 
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/

Did you know that Google toolbar doesn't work properly in FF rc1? I have filed a bug report to Google about this

The Google toolbar doesn't recognize a left mouse click when selecting a 'suggestion'. It's OK using the keyboard, however. I have filed a bug report with Google, but as this is an important extension thought you should know.

See also: http://forums.adobe.com/message/4662367#4662367
-Noel

Javascript passing back 'single quote ' doesn't work

Hello;
I have a custom popup search page that work very well. but if I have a single quote value stop working
Example
javascript:passBackSearch('hello','Dog's Home') Doesn't Work
javascript:passBackSearch('hello','Home of the dog') Works
any Ideas how can fix this
Thanks
Mauricio

Hello,
You need to escape the single quote as &#39; in your query.
http://webdesign.about.com/od/charactersets/a/bl_htmlcodes.htm
Carl
Message was edited by:
Carl Backstrom

Flashing question mark on start up -Pram reset worked now it's back and pram doesn't work

So the other half has crashed my mid 2012 macbook pro twice in two days (watching youtube). First time I managed to get passed the flashing question mark folder icon using pram reset now this doesn't work and it just goes to that icon. Hard drive is missing in. utility so can't whipe that either
any suggestions on what has failed, it's only 1.5 years old so I'm really disappointed

A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

The Google Toolbar doesn't work with Firefox 5 and all my bookmarks are saved in the toolbar. How do I go back to version 4?

Unfortunately any enhancements that you've made with FF5 don't outweigh the loss of my bookmarks in the Google Toolbar. How do I go back to FF4?

Install the following Add-on until Google releases a new version of their toolbar that is compatible with Firefox 5. Most Add-ons that worked with Firefox 4 should still work with Firefox 5, but the developers need to update a line in their Add-on's code to indicate with which versions of Firefox the Add-on is compatible. The following Add-on adds a "Compatibility" button in your Add-ons > Extensions that you may need to click after installing it and restarting Firefox.
*Add-on Compatibility Reporter: https://addons.mozilla.org/en-US/firefox/addon/15003
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.

I have just upgraded to Firefox 5 and google toolbar doesn't work anymore. How can I go back?

What details?
''locking - asked & answered multiple time - moderator''

Thats because the old installed version of googletoolbar has a file named install.rdf that declares the max supported version of firefox to be 4.0.
To fix this ,just open the install.rdf file with notepad and change maxVersion from 4.0.* to 6.* (see the image i've also uploaded)
Now, in order to find the correct install.rdf file do the following:
Go to folder : C:\Users\[your user name here]\AppData\Roaming\Mozilla\Firefox\Profiles\[sometext].default and search for the install.rdf file (im using windows 7)
Windows search will find many install.rdf files (one for each addon you have installed on firefox) so make sure that you find the install.rdf that has the line
Google Toolbar for Firefox
in it. For this install.rdf file just rename the max version as stated above , restart firefox..and vuala! Google toolbar is back!

My navigation toolbar doesn't work properly.

Normally, after i write the site i want to navigate (e.g : www.yahoo.com), and press enter, the site start navigate automatically. But now, after i press enter, nothing happens. It's not even loading.
My enter button is working properly. (i've tried it by writing something on notepad, and the enter button really worked). But at navigation toolbar, after i input the site i want to navigate and press enter, nothing happen. I have to click the arrow at the right side on navigation toolbar to start loading the page. Before, i don't have to do that. I only need to press enter. But now, the enter button didn't work. Anyone can help me?

I agree..this stinks..want to get 4.0 off as soon as possible..I want my tool bar back..without a maze of instructions!!!!...why cant they just leave something that works great alone..

Customizing the toolbar doesn't work

I have used "View>Toolbars>Customize" to put a "New Tab" icon on the navigation toolbar. This has worked for weeks and weeks, putting on a new tab when I have clicked on it. Suddenly, for no apparent reason, it no longer works and neither does the '+' at the right of a tab.
Could someone tell me how to get the "New Tab" feature working again, please

Go to the Customize menu you mentioned already again and then in the panel which opens, click the button called '''Restore Default Set'''. Then click "'''Done'''".
You should be able to drag the '''+''' sign back to the toolbar to create a button when you open the Customize menu again afterwards.
If this answers your question, please click the '''Solved it''' button next to this post after you log in into the forum. This will help others searching for a solution to the same subject.
Thanks.

"go back" on toolbar doesn't work

Similar Messages

Maybe you are looking for