Go back to day one. I have no start up disk I do have my copy of Snow Leopard 10.6.3
I have two questions. I want to install Lion. I tried to install more memory I have two 512 MB I try to install a 2 GB stick.that did not work PowerLite flashes. So I'm back to 1 GB. I only have 4 GB left on my 160 GB hard drive. There is nothing on my computer that I want I want to install fresh can I do that and how do I do that?
What do you mean you "have no startup disk?" Does that mean your drive has failed or is unusable? If it's a drive failure, reinstalling from the DVD won't fix anything. With only 4GB free space left, you may have hopelessly corrupted the disk. If the drive hasn't failed, just erase the drive and reinstall from the 10.6.3 DVD.
EDIT: Oops, reading too quickly. Didn't pay enough attention to iMac G5. You can't install Snow Leopard or Lion on an iMac G5. The highest OS will be Leopard.
If you have only 4GB left, you better get busy making some room by removing things from your Home Folder. If you call Apple with the serial #, they will send you, at nominal cost, the original disks that shipped with the Mac. You need to leave at least 10-15% free or you will completely mangle your drive.
Message was edited by: WZZZ
Similar Messages
-
Can I have both Lion and Snow Leopard on One Hard Drive?
My problem is I need to run a PowerPC game on Lion which Lion no longer supports. So i thought i could download Snow Leopard back to my Mac and partiition my hard drive in the process as that is the only way i know of to have both Lion and Snow Leopard. I went through the Boot Camp Asistant process and it seems it will only partition Windows 7 to my Mac when i need Snow Leopard. If anyone has any idea how to help me have both Lion and Snow Leopard at the same time on just one hard drive or figure out how to run the PowerPC programs on my Mac (if there is a way around it). The help will be well appreciated!
How To Run Snow Leopard On A New Mac
This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
What has to be done:
Create a new partition on the hard drive.
Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard system onto the new partition.
Step One: Create a new partition on the hard drive
To resize the drive and create a new partition do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Step Two: Obtain a clone of a Snow Leopard system:
You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
Option One:
Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the new partition on the internal drive. Source means the USB flash drive.
Option Two:
If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external drive. Source means the Snow Leopard Mac's internal drive.
After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
Restore the clone using Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the new partition on the internal drive. Source means the external drive.
If the above seems too daunting then you might consider running Snow Leopard inside an emulator such as Parallels 7. You are permitted to install a single copy of Snow Leopard inside a virtual machine. You will need to first purchase a copy of Parallels 7 and install it on your new Mac. Create a new virtual machine configured for Mac OS X. You may then install Snow Leopard in the virtual machine then download Mac OS X 10.6.8 Update Combo v1.1 and update to 10.6.8. Be sure to include Rosetta in your initial Snow Leopard installation. Rosetta is not installed by default rather it's an optional install. -
iPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it
Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
I have Mac OS X version 10.5.8 and so im wondering what is the next step i need to get. i have tried to get snow leopard and other things and not having any lukck . can any one help me out pls.
If your Mac meets these requirements:
http://support.apple.com/kb/SP575
then you can order a Snow Leopard disk and install it.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao. -
I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy and it is telling me so. Can any one help please?
Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
In fact there's a new one for HP at the top of the list just now.
You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc. -
Computer iMac7,1 has been giving sundry problems for sometime. Within the last six weeks I have reinstalled the OS (Snow Leopard),without affecting the overall contents of the hard drive.
±3 weeks later the problems became more serious and I againreinstalled the OS and installed OS 6.6.7 from the internet.
I used the option to restore from the external backup driveand went back some time as it was my intention to reinstall individualcomponent in an attempt to find out where the problem might lie. This hasintroduced an entirely new problem! If I open Time Machine from the desktop itappears that all backups from late 2009 to June 2011 are intact. But, in thiscase there are none of the restore functions &c on screen. The latter areonly shown if Time Machine is opened from the menu bar or from the dock but, inthis case, available are only backups in late 2009!
I also opened the Apple Hardware Test in an attempt toestablish the nature of the problem. The ‘quick’ version said there’s nothingwrong; the more detailed one reported “Error detected, 4HD/11/40000004.” I haveagain tried to employ this test but nothing I do can induce it to open!!!
What to do? I need help urgently and would appreciate anyadvice that offers solutions to the problem.To check your S.M.A.R.T status open disk utility and click on your drive and then click on the info icon.
-
I don't have the option of installing a clean copy of Snow Leopard
I'm new to Mac and have been exploring different programs that would fulfill the same functions as the programs I had been using on Vista. Unfortunately, my computer got a little wonky somewhere along the way and I want to remedy it by erasing the hard drive and installing a clean copy of Snow Leopard. I've looked in my owner's manual as well as several websites online. They all tell me to select something either from a tab or an Options menu but there isn't one. When I reach the Select Destination window, I have the option to customize what is installed (i.e. Quicktime, Rosetta, etc.), go back and continue. Is it not possible or something???
it's possible but there is likely no need to do this. what exactly is wrong with your computer? a simple reinstall of snow leopard on top of your current system will cure many ills and will preserve your data and applications. and many problems can be solved without reinstalling at all.
but if you insist on doing a wipe and install boot from the SL install DVD and start disk utility from utilities menu at the top. erase your hard drive using the erase tab in disk utility. then quit disk utility and proceed with the install. and if you do reinstall I suggest you back up your data first. otherwise it will be completely wiped when you erase your hard drive. and you should always back up anyway.
Message was edited by: V.K. -
Do I have to get a hard copy of Snow Leopard for my iMac if I already have it for my MacBook?
I have Leopard on my iMac, and Snow Leopard on my MacBook (both with all available updates)~I tried to use the Snow Leopard Install DVD from the MacBook to upgrade the iMac, but it said "Mac OS X 10.6 cannot be installed on this computer." Why??? Do I have to get a hard copy of Snow Leopard for my iMac? Are there different upgrades for the iMac vs. MacBook?
I think I understand that once I have both computers on Snow Leopard, the Lion upgrade would be ONE upgrade for BOTH computers {I'm guessing I would need the client version for at home use}. Also, once Lion was on one computer, would I just go into the Mac App store on the other one and download the upgrade on the other one? But no additional fee would be charged? Lastly, I read about the combo option that includes all updates to Lion since it's release~would that be the main Lion upgrade on the Mac App or would I have to search for it?
Thanks for your help!The disc you used would have been the install disc that came with your Mac. These can only be used on that as they are made for that specific model.
Make sure your machine meets requirements
Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
At least 2GB of RAM
Mac OS X 10.6.6 or later (Mac OS X 10.6.8 is recommended)
7 GB of free hard drive space is recommended
Once you've purchased it would be a good idea to create a bootable DVD or USB
http://www.macworld.com/article/161069/2011/07/make_a_bootable_lion_installer.ht ml
But you can also go into the purchased section and download again -
I bought a new router - Netgear WNR3500L. I had a dlink. The problem is now when I click to open iChat, I don't see any of my Buddies in the window and shortly thereafter, my iChat quits. I have a G5, running Snow Leopard. My firewall is off. I'm not savvy to how the settings should be. Help please!
Try logging on to AIM on port 443 rather than port 5190.
Go to IChat in the menu bar > Preferences > Accounts.
Log out of AIM and then use the Server Settings tab
Set the port to 443(press return/enter(you might have to tick and untick SSL for 443 to stick)).
Log back in again.
And turn your Mac's firewll on and add iChat. -
Rephrase..Have 2009 iMac running snow leopard should I upgrade to Mavericks
Rephrase..Have 2009 iMac running snow leopard should I upgrade to Mavericks
If your machine meets the specs, the latest is Yosemite; make sure you check all the requirements as your machine falls right at the back end of being supported - meaning that it will not run at its maximum speed due to an older processor. You'd also need an absolute minimum opf 4 GB RAM - 8 would be much better.
-
I'm trying to upgrade my daughter's computer for college. She currently has OS 10.5.8. She needs to upgrade to Mountain Lion. I know I have to upgrade to Snow Leopard and Lion first. I can't find the download for either. Please help! I was in the site the other day and thought I saw a link, but now I can't find it.
Thanks.There is no download for Snow Leopard and never was for the general public. Phone the Apple Store and buy it.
Purchasing Lion isn't necessary to get Mountain Lion, but you will need to run the Mac OS X 10.6.8 combo updater.
(68687) -
Will i have problem upgrading from Snow Leopard 10.6.8 to Maverick ?
will i have problem upgrading from Snow Leopard 10.6.8 to Maverick ?
Impossible to know. But I would make a backup before doing so, just in case. I would also do the following:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you wish to save yourself a lot time should you need to reinstall Mavericks at some point in the future then see the following:
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
/Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time. When completed it would be wise to test the installer by checking that it boots the computer and is then ready for installation. -
I have just upgraded to snow leopard and ical now wont open. says it is not compatible and is ical 3.0.2 which seems strange as i have a osx10.6.3 . have looked for update but cant find one, what do i do?
Greetings,
It sounds like you have moved iCal from it's normal location and are opening a second copy which is the older version.
The current version of OS X 10.6 is 10.6.8. As you are running 10.6.3 you need the updates. Go to the Apple Menu > Software update and keep doing this until it says all updates have been installed.
Click anywhere on your desktop (the background).
Go to the top of the computer screen and click on "Go" > "Applications"
In this list look for "iCal".
Double-click iCal in this location (which is the proper home for iCal) and see what version it says.
If it reports the correct version you can drag the iCal from the Applications folder to the dock on your screen to add an button for it (if you already have one in the dock, remove it before you drag this one there). Be sure to leave iCal in the Applications folder.
Hope that helps. -
Do I have to upgrade to Snow Leopard before I can upgrade to Lion?
Chrome will no longer update unless I update my MacBook. I have Leopard. Do I have to upgrade to Snow Leopard first before i can upgrade to Lion or can I go straight to Lion? And should I back up my hard drive first before I do an upgrade?
You need Apple Store to upgrade to Lion (unless you bought a usb with Lion on it).
Snow Leopard will have the App Store once you update.
This is how I did it Leopard --> Snow Leopard --> update to get the App Store --> Lion.
And Yes, you should always back up your hard drive before doing any upgrade : )
Btw, here's the unofficial way of updating Leopard to Lion. I never tried it, can't say it will work, so do it at your own risk.
http://www.macworld.com/article/1161087/install_lion_over_leopard.html -
I have a MacBook with Snow Leopard 10.6.8 and iTunes 11.0.1. When I tether my new iPod Nano, the icon shows up on my desktop, but does not show up under devices in iTunes. The Nano says it is connected and synching, but I cannot download music if it doesn't show up under devices.
Hi,
Have you managed to solve this problem? if yes, please highlight how you solved it...i'm facing same problem with my new Iphone 5S but udner Windows, thanks.
Maybe you are looking for
-
Rebate Conditions issue (Pricing incorrect Order Viz Billing)
Hi Forum, We have an issue with the rebate conditions. User has created a credit memo request (VA01) due to change in the Price. Due to this change rebate accruals have got reduced. The rebate accruals should not be reduced in this case, since there
-
Is there a way to view contacts in backup files? Switched carries and stuck without old contacts.
I just switched carriers from AT&T to Verizon. I had the iPhone4 on AT&T but couldnt get service where we just relocated to. So, we made the switch today. I backed up my old phone one last time early last week, put it on eBay and sent it out the door
-
any ideas how i could resolve this? last time it worked i was restoring it and it wiped all music so i have an empty ipod...
-
Can someone pls Help me: How to create a Fake target table(Dummy) in DAC
Hi There, Can someone pls Help me in creating a Fake target table(Dummy) in DAC? Thanks, Raghu
-
Max number of records to hold in explicit cursor
Hi Everyone, What is the maxmimum number of records that could be holded in an explicit cursor for manipulation. I need to process millions of records. Can I hold it in cursors or use temp table to hold those records and do fixes with volume control.