Go Connect To Server Timeout

I am connecting to a remote computer through a VPN via SMB with Hamachi. It works great on all my folders except one that contains hundreds of folders. Every time I try to connect to it I get a timeout error.
So is there any way to increase the timeout for this? Any other workarounds besides re-organizing the folders?

Sorry. This post is inaccurate. I was using the wrong IP address for this folder.
All works well now. Please delete this topic if possible.
Sorry!
Message was edited by: DjAtwill

Similar Messages

Connections dropped, DNS and server timeouts from new Lenovo with 802.11n

New Airport Extreme, works great with Windows XP machine ethernetted into it, and also with a MacBook with wireless-N.
But my brand new Lenovo T60P with wireless-N is flakey with the Airport. It connects fine with a 100% signal, using the WPA2-PSK / AES setting on the Lenovo (WPA2 Personal security in 802.11n b/g compatibility mode on the Airport). Most of the time it works quite well.
But very frequently (every five minutes?) one of two things will happen: with the signal still registering fine in the taskbar (and in the laptop's wireless "status" utility), it will become unable to locate any website, including google.com, etc., and refreshes of currently-displayed websites yield server timeouts. The browser (firefox) gives a DNS timeout message. The second thing is just your basic dropped wireless connection. It will reconnect by itself after a while.
Any advice is hugely appreciated. It ***** to "upgrade" to headaches! (Ha! the forum software doesn't like a synonym for "vaccuums". Apologies to the nuns at Apple for my potty mouth.)

New Airport Extreme, works great with Windows XP
machine ethernetted into it, and also with a MacBook
with wireless-N.
But my brand new Lenovo T60P with wireless-N is
flakey with the Airport. It connects fine with a
100% signal, using the WPA2-PSK / AES setting on the
Lenovo (WPA2 Personal security in 802.11n b/g
compatibility mode on the Airport). Most of the time
it works quite well.
But very frequently (every five minutes?) one of two
things will happen: with the signal still registering
fine in the taskbar (and in the laptop's wireless
"status" utility), it will become unable to locate
any website, including google.com, etc., and
refreshes of currently-displayed websites yield
server timeouts. The browser (firefox) gives a DNS
timeout message. The second thing is just your basic
dropped wireless connection. It will reconnect by
itself after a while.
Any advice is hugely appreciated. It ***** to
"upgrade" to headaches! (Ha! the forum software
doesn't like a synonym for "vaccuums". Apologies to
the nuns at Apple for my potty mouth.)
What you experienced is not a surprise as 802.11n is not a standard yet and each manufacturer has developed it own "pre-n" version. Right now Apple (base station) will work with Apple (notebooks), Dlink (routers) will work with Dlink (PCMCIA cards), etc.
Lenovo is no different. You can expect 80-90% compatibility, but not 100%. To expect cross-vendor 100% compatibility, you will likely have to wait until 802.11n is "approved" and then the firmware is updated on all devices.

DNS timeout and Name Server timeout between two DC's

Hi All
My clients have a brand new domain built for them, with two domain controllers at separate sites, and one site is having some issues.
At one site (where DC2 is hosted), all users are having 5-10 minute log on delays - once in everything is running without issues. Site where DC1 is has zero issues - they run smoothly, get a nice quick login etc. All users are using redirected folders and
all have the same GPO's applying to them.
DC1 also has periodic issues communicating with DC2 - nslookup using DC2 gives "DNS request timed out. timeout was 2 seconds" on external AND internal queries, but then 5 minutes later will resolve perfectly. During the "DNS time out"
period, trying to resolve DC2 as a Name Server also gives the error "A timeout occurred during validation".
Not sure if these (slow logon and DNS/NameServer time out issues) issues are related but I am at a loss.
Reverse lookup zones are fully created and populated, entries aren't randomly deleting themselves. Replication between both DC's is working fine, no errors and SYSVOL/NETLOGON are sharing fine from both DC's. Occassionally restarting the DNS server services
on both servers will kick them back into talking - but only for around 30sec-1minute, after that they communicate periodically without problems and spend the rest of the time not resolving.
Any ideas floating around, as I am at a loss here. We haven't been able to join more than a few test users to DC2's site for fear of them all calling every day due to long log on periods.

Hi,
Are you pointing each DC/DNS to the other one as primary dns in tcp/ip properties? Can you post a dcdiag /a /f:dcdiag.log from the DC2?
Any warnings/errors in Application log on the client(s) facing issues after they get logged in ? Can you also confirm that users from site with DC2 are having DC at : set | find /I "LOGONSERVER" output?
Hope it helps.
Regards,
Calin
Hi Calin
The DC's were originally pointing at each other for the primary but others prior to posting here suggested that was not best practice anymore and said they should be the other way around - in any case, either direction doesn't resolve the issues.
The only application error the users are getting is :
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
The winlogon notification subscriber <GPClient> took 84 second(s) to handle the notification event (Logon)
DCDIAG of DC2 :
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = CAB1-DC-V01
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: AUS\NDC1-DC-V01
Starting test: Connectivity
......................... NDC1-DC-V01 passed test Connectivity
Testing server: AUS\CAB1-DC-V01
Starting test: Connectivity
......................... CAB1-DC-V01 passed test Connectivity
Doing primary tests
Testing server: AUS\NDC1-DC-V01
Starting test: Advertising
......................... NDC1-DC-V01 passed test Advertising
Starting test: FrsEvent
......................... NDC1-DC-V01 passed test FrsEvent
Starting test: DFSREvent
......................... NDC1-DC-V01 passed test DFSREvent
Starting test: SysVolCheck
......................... NDC1-DC-V01 passed test SysVolCheck
Starting test: KccEvent
......................... NDC1-DC-V01 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... NDC1-DC-V01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... NDC1-DC-V01 passed test MachineAccount
Starting test: NCSecDesc
......................... NDC1-DC-V01 passed test NCSecDesc
Starting test: NetLogons
......................... NDC1-DC-V01 passed test NetLogons
Starting test: ObjectsReplicated
......................... NDC1-DC-V01 passed test ObjectsReplicated
Starting test: Replications
......................... NDC1-DC-V01 passed test Replications
Starting test: RidManager
......................... NDC1-DC-V01 passed test RidManager
Starting test: Services
......................... NDC1-DC-V01 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:25:05
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:25:05
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:25:05
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:25:06
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:25:06
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:25:06
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular logical range.
......................... NDC1-DC-V01 failed test SystemLog
Starting test: VerifyReferences
......................... NDC1-DC-V01 passed test VerifyReferences
Testing server: AUS\CAB1-DC-V01
Starting test: Advertising
......................... CAB1-DC-V01 passed test Advertising
Starting test: FrsEvent
......................... CAB1-DC-V01 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... CAB1-DC-V01 passed test DFSREvent
Starting test: SysVolCheck
......................... CAB1-DC-V01 passed test SysVolCheck
Starting test: KccEvent
......................... CAB1-DC-V01 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... CAB1-DC-V01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... CAB1-DC-V01 passed test MachineAccount
Starting test: NCSecDesc
......................... CAB1-DC-V01 passed test NCSecDesc
Starting test: NetLogons
......................... CAB1-DC-V01 passed test NetLogons
Starting test: ObjectsReplicated
......................... CAB1-DC-V01 passed test ObjectsReplicated
Starting test: Replications
......................... CAB1-DC-V01 passed test Replications
Starting test: RidManager
......................... CAB1-DC-V01 passed test RidManager
Starting test: Services
......................... CAB1-DC-V01 passed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:30:22
Event String:
DCOM was unable to communicate with the computer 139.130.4.4 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:30:43
Event String:
DCOM was unable to communicate with the computer 203.50.2.71 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:31:05
Event String:
DCOM was unable to communicate with the computer 8.8.4.4 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:31:27
Event String:
DCOM was unable to communicate with the computer 8.8.8.8 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
......................... CAB1-DC-V01 failed test SystemLog
Starting test: VerifyReferences
......................... CAB1-DC-V01 passed test VerifyReferences
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : aus
Starting test: CheckSDRefDom
......................... aus passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... aus passed test CrossRefValidation
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running enterprise tests on : swms.com
Starting test: LocatorCheck
......................... swms.com passed test LocatorCheck
Starting test: Intersite
Doing intersite inbound replication test on site AUS:
......................... swms.com passed test Intersite
SYSVOL is sharing OK, these errors are occurring when DC1 is performing backups and comes good a few seconds later)
The DNS failures are not on the NIC of each server they are the forwarders for the server, not sure why they are failing as DNS lookup is running fine and the IP's are resolving correctly within the forwarders.
set | find /I "LOGONSERVER"
C:\Users\Christopher.McCartne>set | find /I "LOGONSERVER"
LOGONSERVER=\\NDC1-DC-V01
NDC1 = DC1
CAB1 = DC2
The users are logging onto NDC1 currently as I did switch around their DNS servers to have DC1 as their primary to test if this resolved the logon times. It didn't so I've switched them back and will re-run the check to see which server is the logonserver.

RFC connection results in "Timeout during connection setup"

Hello Guys,
The RFC ABAP connection to the Solution Manager encounters connection error: "/ CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242#Timeout during connection setup."
The Solution Manager has following details:
SAP Solution Manager (700 15)
ORACLE 10.2.0.2.0
HP-UX
The R/3 QAS Customer 1 system has following details:
SAP R/3 Enterprise (620 54)
ORACLE 9.2.0.8.0
HP-UX
The R/3 QAS Customer 2 system has following details:
SAP R/3 Enterprise (620 59)
ORACLE 9.2.0.8.0
HP-UX
The RFC ABAP connection from <SID Solution Manager> -> <SID R/3 QAS Customer 1> is working correctly.
The RFC ABAP connection from <SID R/3 QAS Customer 2> -> <SID Solution Manager> is working correctly.
The RFC ABAP connection from <SID R/3 QAS Customer 1> -> <SID Solution Manager> encounters connection error:
ERROR                timeout during allocate
LOCATION             SAP-Gateway on host hemisrq.services.retail.tc.services.retail.tc / sapgw01
DETAIL               no connect of TP sapdp02 from host conssmp.servom host <host name Solution Manager> after 22
COMPONENT            SAP-Gateway
COUNTER              1152
MODULE               gwr3cpic.c
LINE                 1820
RETURN CODE          242
SUBRC                    0
RELEASE              640
TIME                 Thu Jun 5 10:55:15 2008
VERSION              2
Here's the dev_rfc0 log file
Trace file opened at 20080605 101956 METDST SAP-REL 640,0,235 RFC-VER 3 985555
======> CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFC_PING
User: SAPBEHEER (Client: 000)
Destination: <SID Solution Manager>CLNT010 (handle: 2, , {4846C6DC-14A2-0F1F-E100-0000AC1B29D8})
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2277
CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
HOST =<host name Solution Manager>
SERV =sapdp02
Checked the error code 242 "GW_TIMEOUT" and found:
Connection setup to the remote gateway has been closed because timeout has been exceeded.
The time limit can be set in parameter gw/timeout.
Changed parameter gw/timeout to value 10000, but still encounter same error message.
From OS level <SID R/3 QAS Customer 1> i can ping the <host name Solution Manager>.
fvb1:/home/stampg$>ping <host name Solution Manager>
PING <host name Solution Manager>: 64 byte packets
64 bytes from 172.27.68.239: icmp_seq=0. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=1. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=2. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=3. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=4. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=5. time=1. ms
conssmp.services.retail.tc PING Statistics----
6 packets transmitted, 6 packets received, 0% packet loss
round-trip (ms) min/avg/max = 1/1/1
Any suggestions where to look ?
Regards,
Gidion

Hello Gidion,
can you please verify the hostnames/FQDN's? Because:
LOCATION SAP-Gateway on host hemisrq.services.retail.tc.services.retail.tc / sapgw01
host hemisrq.services.retail.tc.services.retail.tc
It seems to me that somewhere the domain is double used.
Additionally:
Sometime there is sapgw 01, sometime sapdp 02. Can you please check the correct service numbers / system numbers?
Regards
Holger

Preventing Server Timeout on a Socket

I have been questioning my solution to preventing server timeout and was wondering if anyone knows of a better way to do it. I am using a socket to connect to a ftp server which times out the connection after 3 minutes of inactivity. I have tried using the setKeepAlive(true) method for the Socket, but it does not prevent the server from timing me out after 3 minutes of inactivity. I have no idea why it doesn't or what keep alive even means now. My solution was to create a special Thread once the connection is made and have it send a blank command every minute until the Socket is no longer connected to the server. This works fine, but it seems like a workaround rather then a graceful solution. Does anyone have any ideas or input on this? Thank you.

I think that is a good idea. But just one more
question... What does the Socket method
setKeepAlive(true) do (and saying that, "it turns
keep alive on" is not a valid answer... Sun)?There are number of problems with setKeepAlive.
The basic idea is this. It is not so much keeping the socket connection alive as detecting whether it is dead.
But the problems with this are that it is basically a hack. It's not part of TCP and basically as far as I understand sends fake packets to the other side to fool the otherside into retransmitting the last packet.
But it may not work because as stated it's not an official part of TCP and I think the message may well be viewed from the other side as erroneous junk because your side already acknowleged the reciept of the original packet so a request for retransmission would appear to be a request that was old and got hung up somewhere.
Sometimes it works but not very much so.

Server Timeout Error

I hope someone can help.
When trying to publish to the ME gallery a small album of 7 pictures I get a server timeout error. My computer is also not updating new pictures to already published albums and my son is having trouble uploading youtube videos.
I have contacted mobile-me support and Apple support.
I have repaired disk permissions and keychain. My last conversation it was thought it might be an ISP problem. Cox cable reported that my upload speed was 750,000.
I have my computer connected to an airport extreme by hardwire. I have made a new user account on my computer and was able to upload 7 pictures without problems. I was also able to upload these same 7 pictures using my macbook on the wireless network through the airport extreme without an issue.
The best that I can figure out is that there must be a setting unique to my account that is causing the difficulty.
Any help would be appreacited

Please provide more information about your system.
What version of SAP BPC?
Do you have a configuration with 2 application Servers using an NLB?
Usually this happen in case if you have this kind of configuration and NLB is not using affinity single (in other cases is named pesistency - on).
Regards
Sorin Radulescu

500 server timeout error

Hi
Its urgent!!
Our Production portal was working perfect. Suddenly the iviews is showing 500 server timeout error
Error: -5
Version: 7000
Component: ICM
Module: icxxthr_mt.c
Line: 2698
Error Tag: {-}
Detail: Connection to partner timed out after 60s
The transaction iviews are working fine as of now. ESS iview, identity management are showing timed out error.
please help.
regards,
Sasha.
Edited by: Sasha on Feb 17, 2008 8:35 AM

Hi Sasha,
While i am running the web reports with huge sets of data i am getting the error like below. Could you please help me out on this issue.
Connection timeout(-5)
Error: -5
Version: 6040
Component: ICM
Module: icxxthr_mt.c
Line: 2603
Server:.........
Detail: Connection to partner timed out after 60s
It is very urgent for me, could you please helpme out.
Thanks in advance.
Best Regards,
Hari

Subversion (SVN) checkout could not connect to server. Some default config prevents connections?

Hi there!
I try to use SVN to checkout a project, but command end with error:
svn: OPTIONS of 'http://myserver.com:8081/svn/Project/branches/somedir': could not connect to server (http://myserver.com:8081)
If you use normal port (80) it works. But this is not my SVN server.
In others computers in same LAN, command works fine. So... I think that it is some configuration in my Lion.
ping command show:
$ ping myserver.com
PING myserver.com (200.55.201.69): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
^C
--- myserver.com ping statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss
Need more info? Please ask.
myserver.com IP is already in my /etc/hosts
Specs:
MacBook Air 11" mid 2011
1,6GHz Intel Core i5
128GB/4GB
Fresh install to MacOS X Lion version 10.7.1

Hi there!
I try to use SVN to checkout a project, but command end with error:
svn: OPTIONS of 'http://myserver.com:8081/svn/Project/branches/somedir': could not connect to server (http://myserver.com:8081)
If you use normal port (80) it works. But this is not my SVN server.
In others computers in same LAN, command works fine. So... I think that it is some configuration in my Lion.
ping command show:
$ ping myserver.com
PING myserver.com (200.55.201.69): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
^C
--- myserver.com ping statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss
Need more info? Please ask.
myserver.com IP is already in my /etc/hosts
Specs:
MacBook Air 11" mid 2011
1,6GHz Intel Core i5
128GB/4GB
Fresh install to MacOS X Lion version 10.7.1

MS Sql Server, unable to connect to server after DB table change.

I elected to move some columns from one table to another.
I ran a script to attempt to add the columns to the new table, after deleting the columns, to test the script.
After this, I was unable to do anything with the table involved, I kept getting timeout errors.
I restarted the SQL server instance.
Now, for the whole DB server ( there are multiple DB's hosted on this server ), I get messages like "cannot show requested dialog" additional information: "failed to connect to server devsql01. (Microsoft.SqlServer.ConnectionInfo)" "the
target principal name is incorrect. Cannot generate SSPI context. (Microsoft SQL Server).
How do I fix this?
Thanks in advance,
David

Hi David,
According to your description, you come across the error(the target principal name is incorrect. Cannot generate SSPI context)
Besides Uri's post, this issue could occur when there are duplicate SPNs registered in Active Directory(AD), or the SQL Server service account doesn't have the Read and Write ServicePrincipalName permissions after the change from other users.
To work around the issue, please follow the solutions below.
1.Please check if there are duplicate SPNs registered in AD using LDIFDE tool. If so, please delete them using the setspn tool. For more information about the process, please refer to the article:
http://mssqlwiki.com/2013/12/09/sql-server-connectivity-kerberos-authentication-and-sql-server-spn-service-principal-name-for-sql-server/
2.Please check if SQL Server service account has Read servicePrincipalName and Write servicePrincipalName in the Active Directory service. If it doesn't have, please grant Read and Write ServicePrincipalName permissions.
In addition, there is an article for your reference:
http://support.microsoft.com/kb/811889
Regards,
Michelle Li

Can't connect second Server to Essentials R2 Domain

When I try to connect a Server 2012 R2 (Standard Edition) machine to my essentials box, I get the error message:
"The Server is not available. Try Connecting this computer again or for more information, see Troubleshoot connecting computers to the server."
This despite the fact that I am able to logon to the essentials box from the new server in question with remote web access over the LAN.
The essentials box is named "svressentials"
When I enter "https://svressentials" into my browser on the new server I'm trying to connect, it brings up the remotewebaccess login screen and I can login no problem with a domain admin account.
Then when I enter "https://svressentials/connect" it brings up the Connect screen, prompts me to download the connection software etc. After the standard couple of screens the connection wizard
prompts for user name and password at which point I enter the same domain admin account with which I was able to login through remotewebaccess. It thinks about it for about 30 seconds with an hour glass and then returns the above error "The
Server is not available......"
As another piece of info, I purposely entered an incorrect user name and password into the connection wizard and it gave me the same error rather than "No such user" or "invalid password".
I then tried to connect a Windows 8.1 Machine and it failed with the same message.
I have successfully connected a windows 8.1 machine and a two other servers to this domain previously and they connected with no problems. What could be causing this problem now?

Here they are, ClientDeploy.log followed by Computerconnector.log.
ClientDeploy.log
[2060] 140729.073816.7980: ClientSetup: Start of ClientDeploy
[2060] 140729.073816.8293: General: Initializing...C:\Windows\system32\Essentials\ClientDeploy.exe
[2060] 140729.073816.8293: ClientSetup: Create client deployment registry subkey if necessary
[2060] 140729.073816.8449: ClientSetup: The initial launching way: -LaunchedFrom:installer
[2060] 140729.073816.8449: ClientSetup: The initial state is set
[2060] 140729.073816.8449: ClientSetup: The initial serverName: 192.168.1.10
[2060] 140729.073816.8449: ClientSetup: Loading Wizard Data
[2060] 140729.073816.8605: ClientSetup: Saving Wizard Data
[2060] 140729.073816.8605: ClientSetup: Current DeploymentStatus=Start
[2060] 140729.073817.2668: ClientSetup: Showing the Client Deployment Wizard
[2060] 140729.073817.3762: ClientSetup: Machine name:SVRSTDQ9550, length:11
[2060] 140729.073817.3918: ClientSetup: The input server name is 192.168.1.10
[2172] 140729.073817.4074: ClientSetup: Entering ConnectorWizardForm.RunTasks
[2172] 140729.073817.4074: ClientSetup: Running Task with Id=ClientDeploy.PreConfiguration
[2060] 140729.073817.4074: ClientSetup: InitWizard, The currrent stage is ConnectingToServer
[2060] 140729.073817.4074: ClientSetup: Set the Deployment Sync Event
[2172] 140729.073817.4230: ClientSetup: The configuration cab will be downloaded from 192.168.1.10
[2172] 140729.073817.4387: ClientSetup: Download file Setup.cab from server
[2172] 140729.073817.4543: ClientSetup: Making web request: https://192.168.1.10//connect/default.aspx?Get=Setup.cab&LanguageId=1033&64bit=1
[2172] 140729.073817.5480: ClientSetup: Failed to download Setup.cab from server: System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.WindowsServerSolutions.ClientSetup.CSCommon.DownloadFileFromConnectSite(String outputDirectory, Uri serverUrl, String fileName, Int32 languageId, Boolean is64bit)
[2172] 140729.073817.5480: ClientSetup: Cannot get configuration file with https, will try http...
[2172] 140729.073817.5480: ClientSetup: Download file Setup.cab from server
[2172] 140729.073817.5480: ClientSetup: Making web request: http://192.168.1.10//connect/default.aspx?Get=Setup.cab&LanguageId=1033&64bit=1
[2172] 140729.073817.9387: ClientSetup: Downloaded file C:\Windows\Temp\ClientDeploymentTempFiles\Setup.cab
[2172] 140729.073817.9387: ClientSetup: The configuration cab is downloaded to C:\Windows\Temp\ClientDeploymentTempFiles\Setup.cab
[2172] 140729.073818.0949: ClientSetup: Adding Server Info data in the Product Registry
[2172] 140729.073818.1105: DnsEnvironmentDetector: GetHostAddresses() returned 192.168.1.10, normal environment
[2172] 140729.073818.1105: ClientSetup: Exiting PreConfigTask.Run()
[2172] 140729.073818.1105: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has TaskStatus=Success
[2172] 140729.073818.1105: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has RebootStatus=NoReboot
[2172] 140729.073818.1105: ClientSetup: Exting ConnectorWizardForm.RunTasks
[2872] 140729.073830.9387: ClientSetup: Running InstallRootCert Task at WizardPage DomainUserCred
[2872] 140729.073830.9387: ClientSetup: Entering ConnectorWizardForm.RunTasks
[2872] 140729.073830.9387: ClientSetup: Running Task with Id=ClientDeploy.InstallRootCertTask
[2872] 140729.073830.9387: ClientSetup: Entering InstallRootCertTask.Run
[2872] 140729.073830.9387: ClientSetup: Install root cert to local trusted store
[2872] 140729.073830.9387: ClientSetup: Exiting InstallRootCertTask.Run
[2872] 140729.073830.9387: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has TaskStatus=Success
[2872] 140729.073830.9387: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has RebootStatus=NoReboot
[2872] 140729.073830.9387: ClientSetup: Exting ConnectorWizardForm.RunTasks
[2872] 140729.073830.9387: ClientSetup: Running SetupVPNAndDA Task at WizardPage DomainUserCred
[2872] 140729.073830.9387: ClientSetup: Entering ConnectorWizardForm.RunTasks
[2872] 140729.073830.9387: ClientSetup: Running Task with Id=ClientDeploy.SetupVpnAndDATask
[2872] 140729.073830.9543: ClientSetup: Entering SetupVpnAndDATask.Run
[2872] 140729.073830.9699: ClientSetup: Exting SetupVpnAndDATask.Run
[2872] 140729.073830.9699: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has TaskStatus=Success
[2872] 140729.073830.9699: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has RebootStatus=NoReboot
[2872] 140729.073830.9699: ClientSetup: Exting ConnectorWizardForm.RunTasks
[2872] 140729.073830.9699: ClientSetup: Running ValidateUser Tasks at WizardPage DomainUserCred
[2872] 140729.073830.9699: ClientSetup: Entering ConnectorWizardForm.RunTasks
[2872] 140729.073830.9699: ClientSetup: Running Task with Id=ClientDeploy.ValidateUser
[2872] 140729.073830.9856: ClientSetup: Entering ValidateUserTask.Run
[2872] 140729.073830.9856: ClientSetup: Validating User
[2872] 140729.073830.9856: ClientSetup: Call MachineIdentityManager.GetMachineStatus
[2872] 140729.073832.0637: ClientSetup: MachineIdentityManager.GetMachineStatus had errors: ErrorCatalog:ProviderNotAvailable ErrorCode:-1
BaseException: Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityException: MachineIdentityManager.GetMachineStatus ---> System.ServiceModel.EndpointNotFoundException: There was no endpoint listening at https://svressentials:65500/CertWebservice.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.1.10:65500
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.WindowsServerSolutions.Devices.Identity.CertWebService.ICertService.GetMachineStatus(GetMachineStatusRequest request)
at Microsoft.WindowsServerSolutions.Devices.Identity.CertWebService.CertServiceClient.GetMachineStatus(String userName, String password, String machineName, MachineStatus& status, Boolean& isAdmin, Int32& maxClientNum, Int32& currentClientNum)
at Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
--- End of inner exception stack trace ---
at Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
at Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.ValidateUserTask.Run(WizData data)
[2872] 140729.073832.0637: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\Windows\system32\ipconfig.exe" /all
[2172] 140729.073832.0949: ClientSetup: Standard Ouptput:
[2172] 140729.073832.0949: ClientSetup: Standard Ouptput: Windows IP Configuration
[2172] 140729.073832.0949: ClientSetup: Standard Ouptput:
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput: Host Name . . . . . . . . . . . . : svrStdQ9550
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput: Primary Dns Suffix . . . . . . . :
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput: Node Type . . . . . . . . . . . . : Hybrid
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput: IP Routing Enabled. . . . . . . . : No
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput: WINS Proxy Enabled. . . . . . . . : No
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput: DNS Suffix Search List. . . . . . : ivsDomain.local
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput:
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput: Ethernet adapter Ethernet 3:
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput:
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput: Media State . . . . . . . . . . . : Media disconnected
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput: Connection-specific DNS Suffix . :
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput: Description . . . . . . . . . . . : D-Link DGE-530T Gigabit Ethernet Adapter
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput: Physical Address. . . . . . . . . : C4-A8-1D-F8-FD-85
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput: DHCP Enabled. . . . . . . . . . . : Yes
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput: Autoconfiguration Enabled . . . . : Yes
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput:
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput: Ethernet adapter Ethernet 2:
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput:
[2948] 140729.073832.0949: ClientSetup: Standard Ouptput: Media State . . . . . . . . . . . : Media disconnected
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Connection-specific DNS Suffix . :
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Physical Address. . . . . . . . . : 00-E0-53-15-04-14
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: DHCP Enabled. . . . . . . . . . . : Yes
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Autoconfiguration Enabled . . . . : Yes
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput:
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Ethernet adapter Ethernet:
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput:
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Connection-specific DNS Suffix . : ivsDomain.local
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Description . . . . . . . . . . . : Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Physical Address. . . . . . . . . : E0-CB-4E-0E-18-B0
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: DHCP Enabled. . . . . . . . . . . : Yes
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Autoconfiguration Enabled . . . . : Yes
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Link-local IPv6 Address . . . . . : fe80::a060:f0dc:736f:7f9a%12(Preferred)
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: IPv4 Address. . . . . . . . . . . : 192.168.1.67(Preferred)
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Subnet Mask . . . . . . . . . . . : 255.255.255.0
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Lease Obtained. . . . . . . . . . : July 27, 2014 8:22:33 PM
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Lease Expires . . . . . . . . . . : August 4, 2014 8:22:39 PM
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Default Gateway . . . . . . . . . : 192.168.1.1
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: DHCP Server . . . . . . . . . . . : 192.168.1.10
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: DHCPv6 IAID . . . . . . . . . . . : 316721998
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-42-46-43-E0-CB-4E-0E-18-B0
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: DNS Servers . . . . . . . . . . . : 192.168.1.10
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: 8.8.8.8
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Primary WINS Server . . . . . . . : 192.168.1.10
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: NetBIOS over Tcpip. . . . . . . . : Enabled
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput:
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Tunnel adapter isatap.ivsDomain.local:
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput:
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Media State . . . . . . . . . . . : Media disconnected
[1488] 140729.073832.1106: ClientSetup: Standard Error:
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Connection-specific DNS Suffix . : ivsDomain.local
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Description . . . . . . . . . . . : Microsoft ISATAP Adapter
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: DHCP Enabled. . . . . . . . . . . : No
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput: Autoconfiguration Enabled . . . . : Yes
[2948] 140729.073832.1106: ClientSetup: Standard Ouptput:
[2872] 140729.073832.1106: ClientSetup: The exit code of the process (C:\Windows\system32\ipconfig.exe) is: 0
[2872] 140729.073832.1106: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\Windows\system32\route.exe" print
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: ===========================================================================
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: Interface List
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 15...c4 a8 1d f8 fd 85 ......D-Link DGE-530T Gigabit Ethernet Adapter
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 13...00 e0 53 15 04 14 ......Realtek PCIe GBE Family Controller
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 12...e0 cb 4e 0e 18 b0 ......Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 1...........................Software Loopback Interface 1
[1488] 140729.073832.1418: ClientSetup: Standard Error:
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: ===========================================================================
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput:
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: IPv4 Route Table
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: ===========================================================================
[2872] 140729.073832.1418: ClientSetup: The exit code of the process (C:\Windows\system32\route.exe) is: 0
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: Active Routes:
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: Network Destination Netmask Gateway Interface Metric
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.67 10
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 192.168.1.0 255.255.255.0 On-link 192.168.1.67 266
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 192.168.1.67 255.255.255.255 On-link 192.168.1.67 266
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 192.168.1.255 255.255.255.255 On-link 192.168.1.67 266
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 224.0.0.0 240.0.0.0 On-link 192.168.1.67 266
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 255.255.255.255 255.255.255.255 On-link 192.168.1.67 266
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: ===========================================================================
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: Persistent Routes:
[2872] 140729.073832.1418: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\Windows\system32\nslookup.exe" SVRESSENTIALS
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: None
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput:
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: IPv6 Route Table
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: ===========================================================================
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: Active Routes:
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: If Metric Network Destination Gateway
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 1 306 ::1/128 On-link
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 12 266 fe80::/64 On-link
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 12 266 fe80::a060:f0dc:736f:7f9a/128
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: On-link
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 1 306 ff00::/8 On-link
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: 12 266 ff00::/8 On-link
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: ===========================================================================
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: Persistent Routes:
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput: None
[2948] 140729.073832.1418: ClientSetup: Standard Ouptput:
[2172] 140729.073832.1731: ClientSetup: Standard Ouptput: Server: UnKnown
[2172] 140729.073832.1731: ClientSetup: Standard Ouptput: Address: 192.168.1.10
[2172] 140729.073832.1731: ClientSetup: Standard Ouptput:
[2172] 140729.073832.1731: ClientSetup: Standard Ouptput: Name: SVRESSENTIALS.ivsDomain.local
[2172] 140729.073832.1731: ClientSetup: Standard Ouptput: Address: 192.168.1.10
[2172] 140729.073832.1731: ClientSetup: Standard Ouptput:
[1488] 140729.073832.1731: ClientSetup: Standard Error:
[2948] 140729.073832.1731: ClientSetup: Standard Ouptput:
[2872] 140729.073832.1731: ClientSetup: The exit code of the process (C:\Windows\system32\nslookup.exe) is: 0
[2872] 140729.073832.1731: ClientSetup: Set CD Fail reason 10 for SQM in ClientDeployment.exe
[2872] 140729.073832.1731: ClientSetup: RecordClientDeploymentFailReason: Save registry failed in ClientDeployment.exe : System.UnauthorizedAccessException: Cannot write to the registry key.
at Microsoft.Win32.RegistryKey.EnsureWriteable()
at Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions)
at Microsoft.Win32.RegistryKey.CreateSubKey(String subkey, RegistryKeyPermissionCheck permissionCheck)
at Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.Helper.RecordClientDeploymentFailReason(UInt32 failReason)
[2872] 140729.073832.1731: ClientSetup: Exiting ValidateUserTask.Run
[2872] 140729.073832.1731: ClientSetup: Task with Id=ClientDeploy.ValidateUser has TaskStatus=Failed
[2872] 140729.073832.1731: ClientSetup: Task with Id=ClientDeploy.ValidateUser has RebootStatus=NoReboot
[2872] 140729.073832.1731: ClientSetup: Exting ConnectorWizardForm.RunTasks
[2060] 140729.073839.5950: ClientSetup: Back from the Client Deployment Wizard
[2060] 140729.073839.5950: ServerDiscovery:HostsFileUpdater: Removing hosts file entry: SVRESSENTIALS
[2060] 140729.073839.5950: ClientSetup: Saving Wizard Data
[2060] 140729.073839.5950: ClientSetup: End of ClientDeploy: ErrorCode=1603
Computerconnector.log
[07/29/2014 07:38:11 9a4] --------------------------------------------------------------------------------------------------
[07/29/2014 07:38:11 9a4] wmain: Start of Computerconnector
[07/29/2014 07:38:11 9a4] GlobalData::Initialize (192.168.1.10, C:\Users\Administrator\AppData\Local\Microsoft\Windows\INetCache\IE\CI6X3850\ComputerConnector(192.168.1.10).exe)
[07/29/2014 07:38:11 9a4] =================================
[07/29/2014 07:38:11 9a4] Current Os information:
[07/29/2014 07:38:11 9a4] Suite = [272]
[07/29/2014 07:38:11 9a4] Type = [3]
[07/29/2014 07:38:11 9a4] Architecture = [9]
[07/29/2014 07:38:11 9a4] IsStarterEdition = [0]
[07/29/2014 07:38:11 9a4] IsHomeSku = [0]
[07/29/2014 07:38:11 9a4] Major = [6]
[07/29/2014 07:38:11 9a4] Minor = [3]
[07/29/2014 07:38:11 9a4] Build = [9600]
[07/29/2014 07:38:11 9a4] SPMajor = [0]
[07/29/2014 07:38:11 9a4] SPMinor = [0]
[07/29/2014 07:38:11 9a4] =================================
[07/29/2014 07:38:11 9a4] ExpandEnvironmentStrings return (C:\Windows\Temp\ClientDeploymentTempFiles\)
[07/29/2014 07:38:11 9a4] SetPackageDlcUrl: .NET url is set to http://go.microsoft.com/?linkid=9816306
[07/29/2014 07:38:11 9a4] SetPackageDlcUrl: Connector url is set to http://go.microsoft.com/fwlink/p/?LinkId=275102
[07/29/2014 07:38:11 9a4] wmain: Calling Computerconnector::ShowWizard()
[07/29/2014 07:38:11 9a4] CComputerconnector::ShowWizard: Initializing common controls
[07/29/2014 07:38:11 9a4] CComputerconnector::ShowWizard: Done initializing common controls
[07/29/2014 07:38:11 9a4] Displaying the wizard
[07/29/2014 07:38:11 9a4] CComputerconnector::WelcomeDlgProc: IDD_PROPPAGE_WELCOME Page Initialization
[07/29/2014 07:38:11 9a4] Current user default UI lang setting is 1033
[07/29/2014 07:38:11 95c] CComputerconnector::Run: Installation is ready to run
[07/29/2014 07:38:16 9a4] CComputerconnector::TaskDlgProc: IDD_PROPPAGE_TASKS Page Initialization
[07/29/2014 07:38:16 b10] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Detecting the current system requirements... Index= 0
[07/29/2014 07:38:16 b10] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {21E49794-7C13-4E84-8659-55BD378267D5} returned -1
[07/29/2014 07:38:16 b10] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {46DCED50-3A1D-4EF4-94F0-45F2681E3D70} returned -1
[07/29/2014 07:38:16 b10] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {C1E4D639-4A33-4314-809E-89BD0EF48522} returned -1
[07/29/2014 07:38:16 b10] Connector installation state is 1
[07/29/2014 07:38:16 b10] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Downloading .NET Framework 4.5... Index= 1
[07/29/2014 07:38:16 b10] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Installing .NET Framework 4.5... Index= 2
[07/29/2014 07:38:16 b10] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Downloading the Connector... Index= 3
[07/29/2014 07:38:16 b10] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Installing Windows Server Essentials Connector... Index= 4
[07/29/2014 07:38:16 b10] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Starting the Windows Server Essentials Connector setup... Index= 5
[07/29/2014 07:38:16 b10] RunShellExecute: ShellExecute [C:\Windows\system32\Essentials\ClientDeploy.exe] with parameters [ -Server:192.168.1.10 -LaunchedFrom:installer]
[07/29/2014 07:38:16 9a4] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Running
[07/29/2014 07:38:16 9a4] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Detecting the current system requirements...
[07/29/2014 07:38:16 9a4] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Downloading .NET Framework 4.5...
[07/29/2014 07:38:16 9a4] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Installing .NET Framework 4.5...
[07/29/2014 07:38:16 9a4] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Downloading the Connector...
[07/29/2014 07:38:16 9a4] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Installing Windows Server Essentials Connector...
[07/29/2014 07:38:16 9a4] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Starting the Windows Server Essentials Connector setup...
[07/29/2014 07:38:16 b10] CComputerconnector::Run: Waiting upto 60secs for Sync Event to be signaled
[07/29/2014 07:38:17 b10] CComputerconnector::Run: WaitForSingleObject RetVal = 0
[07/29/2014 07:38:17 9a4] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Success
[07/29/2014 07:38:17 9a4] wmain: End of Computerconnector: hr=0x0

Oracle IRM Desktop connection to server times out

I have installed IRM server on Linux VM and use https to make desktop client to connect to server. The desktop is running on Windows XP. I am getting connection time out very frequently when I refresh context or validate the server, which means the connectivity between desktop to server is not stable. It is very difficult to track down the root cause since there is no log for desktop client I can look at.
Any input?
-J

I have the same problem. Ping works fine(http://irmserver:16100/irm_desktop/ping). There are connections both on server and on the desktop (netstat shows it). In logs on the desktop there are:
"[5840] Сбой синхронизации для http://10.12.248.173:16100/irm_desktop
Сообщение пользователя: "Невозможно установить соединение с сервером IRM"
Код ошибки = 0x80040308 (0x80040E02)
<?xml version="1.0"?><wininet_error>12002</wininet_error>
[IrmBackground.exe]"
On server side there is no information in the server logs.
I am using IRM server - Oracle EL 4 x64, Oracle DB 11G x64, Oracle WL1034, irm server 11.1.1.4.0, irm desktop 11.1.20.86. Desktop on Windows XP Professional.
There is no proxy server between irm server and desktop
Although I found that the syncronization works after 2-3 attempts. It seems that the problem is in the short timeout of the irm desktop waitong for authorization when there are different platforms(Weblogic on linux and AD on MS)
Edited by: tsibir on 11.02.2011 6:04

Any advice as to why I'm getting Email Server Timeouts for my 2 email accounts (ports 993 & 110)?

Email Server Timeouts for my two email accounts:
For the time periods April 12-21, 2012 and April 27-present, 2012 I have been unable to access my email account at ***** through the pop server. The server returns them message "The connection to the server “*****” on port 110 timed out."
I have also had the same problem accessing my gmail account via IMAP, receiving the following message: "The connection to the server “imap.gmail.com” on port 993 timed out."
I used the Connection Doctor program connected to Apple Mail and received the following information:
Mail was able to connect to the internet.
Gmail: Could not connect to this Gmail IMAP server. Check your network connection and that you entered the correct information in the Account preferences. Also verify that the server supports SSL. If it does not, deselect the "Use SSL" checkbox in the Advanced tab of Account preferences.
BayanMail: Could not connect to this POP server. Check your network connection and that you entered the correct information in the Account preferences.
SMTP smtp.gmail.com:*****@gmail.com Connection and login to server succeeded.
*****Mail SMTP server: Connection to server succeeded; login not required.
Can you help me with this problem?
I am running OS 10.6.8
Mail 4.5

The Motorola Droid Razr has a camera that sets up the shot to take a quality picture so its not in an instant. My wife also doesn't like that feature but I believe in the settings you can disable some of those functions. You have to read the owners manual for optimal settings.
Now email sent from the native app that came with the phone is totally useless. If you have a email service like Gmail or Yahoo Mail or Outlook Email go to the google play store and use the stand alone app. I can tell you that when we email photos the best email app is GMail or Microsoft Outlook Mail.
I take a picture and then select Gmail and it attaches and sends with great speed and Outlook works this way also since the attachment size is greater than other email programs. Your local isp or even exchange server will not send such large attachments
And I agree those apps preloaded should be able to be removed. If I buy my phone I should say what I want on it. But alas unless you do some other methods you can find on the web those dumb apps will remain.
Good Luck

Apparent server timeout when running Webi report

Hi,
when running a Webi report in BOXIr2 SP4 we are getting the follwing error which appears to indicate that the reports is hitting the Webi Report Server timeout:
"The Web Intelligence Java Report Panel cannot connect to the server. Close the report panel and try to connect again or see your BusinessObjects administrator. (Error: WIJ 20002)"
However we get the error after approximately 5 minutes, but the Webi Report Server connection timeouts are all set to 60 mniutes.
What other settings could be causing this 5 minute problem? The same report works fine when a shorter period of time (and so a smaller selection of data) is used in the parameters.
thanks
Keith

Hi,
Do you have a Windows Server?
If so, please find the below information, you need to implement this on the server box.:
Swap Timeout
This is the amount of time before a user session WebI document would be removed. In other words, this controls the flushing interval of WebI temporary files. When you are in the Java Report Panel and you leave it idle for more then 5 minutes (Default), you will notice that you will no longer be able to save your
WebI report into the CMS or your report will take longer to generate. This is because every 5 minutes the WebI cache is cleared so those temporary files would have to be regenerated by refreshing the document before you can actually save the document.
The temporary files can be found in
..\BusinessObjects Enterprise 11.5\Data\ServerName\
ServerName.Web_IntelligenceReportServer\sessions\SessionID\
In order to modify this timeout you need to change the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite
11.5\default\WebIntelligence\Server\Admin\SwapTimeOut
Please let me know if this works for you.
Thanks,
Madhu.

Error : connection to server lost

Hi,
After upgrading support pack from PI7.1 EHP1 sp1 to sp8,we are experiencing problem with both ESR and ID timeout,
In 2mins the connection to server is terminated and we need to reconnect to it again with password
Error:
connection interrupted
connection to server lost
What parameters value needs to be changed apart from http_timeout increased to 100000 in sxmb_adm,and i did not timeout/keepalive paramter in configtool or NWA
what changes and where to be done
Thanking you

Hi ,
The Memmory and Heap Memmory seems to be ok,I think some parameter related to timeout should be increased
any idea what it is ? if that is the issue

WEBDB - Connection to server reset...

Fabrizio Guarino (guest) wrote:
: I'm experiencing a network connection error when connecting
and
: querying a database by way the WEBDB.
: I got a pc running Oracle 8i on a RedHat Linux 6,, and on the
: same
: machine it's running webdb.
: When i make a heavy query i got the connection error described
on
: the top (and in the subject).
I'm having the same problem when working from any machine other
than the db server machine. It happens consistently from a
parameter form for a report, or a query form for a table. Any
query that takes more than a half or three quarters of a second
gets interupted with the "Connection to server was reset"
error. Any help would be greatly appreciated.
Thanks...
null

I'm having this problem yet, but i found that using a proxy
server, like Squid, the problem doesn't come out !
What timeout or parameter maybe involved ?
Thanks
Patrick (guest) wrote:
: Fabrizio Guarino (guest) wrote:
: : I'm experiencing a network connection error when connecting
: and
: : querying a database by way the WEBDB.
: : I got a pc running Oracle 8i on a RedHat Linux 6,, and on the
: : same
: : machine it's running webdb.
: : When i make a heavy query i got the connection error
described
: on
: : the top (and in the subject).
: I'm having the same problem when working from any machine other
: than the db server machine. It happens consistently from a
: parameter form for a report, or a query form for a table. Any
: query that takes more than a half or three quarters of a second
: gets interupted with the "Connection to server was reset"
: error. Any help would be greatly appreciated.
: Thanks...
null

Go Connect To Server Timeout

Similar Messages

Maybe you are looking for