Go daddy imap not working for inbox- I have checked ports, help anyone?

Go Daddy and Apple Mail Inbox are not syncing my imap account. Emails appear on server so problem is on Apple end. Outbox is fine. I have checked ports and tried both with SSL and without. Any suggestions?

Same thing happened to me. Looks like the upgrade turns on Location Restriction. To re-enable location:
1) Go to Settings
2) Select "General"
3) Go to "Restrictions"
4) Either Disable Restrictions, or set "Allow/Locations" to "ON".
Location should be re-enabled.

Similar Messages

My apple id is not working for my iPhone activation. Please help me.

my apple id is not working for my iPhone activation. Please help me.
i'll just restore it.

Not working in what way?
Only the Apple ID that was used to enable "Find My iPhone" on the device can be used to bypass Activation Lock.

Sync not working for long time (have tried all the usual suggestions)

Sync stopped working for me months ago and I have not been able to get it to work again.
I'm using Firefox 26 on two different Linux laptops and want to keep the bookmarks and history synced with them. It worked great for a long time. Then around Firefox 25 or so it stopped working. In fact, I logged into an old Linux system I hadn't used in while that still runs Firefox 24 (or maybe it's 23) the other day and it synced great with my laptop I usually use.
I have tried all the suggestsion in the troubleshooting guide (https://support.mozilla.org/en-US/kb/firefox-sync-troubleshooting-and-tips). I tried unlinking all of my devices and linking them again. That worked to sync both laptops once, when I first relinked them, but never again. I tried creating entirely new profiles on both systems and that didn't help.
Is Sync just broken? Why does it continue to work fine in older version of Firefox but none of the last three versions or so? Is there any way to fix this?
Thanks.

Thanks for the replies.
I am not using a proxy server.
Neither system is syncing with the other. It seems like they are both uploading (backing up) the history and bookmarks properly, but then not merging and syncing the changes from the other system. I know things are getting uploaded, because as I said, my third system that I don't use much anymore, with the older version of Firefox, does merge changes in history and bookmarks from the other two systems.
This is what my log looks like:
1390013173379 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok
1390013174376 Sync.Tracker.Addons DEBUG Saving changed IDs to addons
1390013285398 Sync.Tracker.History DEBUG Saving changed IDs to history
1390013418354 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014114789 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014117199 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014130419 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014149015 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014274305 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014316857 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014467343 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014474268 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014539349 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014546079 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014574289 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014600495 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014625762 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014638218 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014665106 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014680655 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014709407 Sync.Tracker.History DEBUG Saving changed IDs to history
1390014783940 Sync.SyncScheduler DEBUG Global Score threshold hit, triggering sync.
1390014783942 Sync.Service DEBUG User-Agent: Firefox/26.0 FxSync/1.28.0.20131212154635.
1390014783942 Sync.Service INFO Starting sync at 2014-01-17 19:13:03
1390014783942 Sync.SyncScheduler DEBUG Clearing sync triggers and the global score.
1390014783942 Sync.Status INFO Resetting Status.
1390014783942 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok
1390014783945 Sync.SyncScheduler DEBUG Next sync in 86400000 ms.
Any other ideas?

Apple Mail search not working for Inbox

In the last few weeks I've notice the Apple Mail (5.2) search feature has stopped working correctly. It used to turn up all relevant results in a mail box, then lately it seems (based on the results) to go back just a few weeks and not the full year of mail that is in the mailbox.
Following the advise of a MacWorld article I removed these files from Mail's library folder… Envelope Index, Envelope Index-shm, and Envelope Index-wal, restarted Mail and followed the prompt to reindex. Following that… Search works worse, I run tests to find a word in the body and get 0 results… and I know it's there. As I type in the last letter of the word into the Seach lozenge I get a list just below the lozenge ) of People and Subjects that contain the word but nada results for the word in the Body of the message. These tests were run on the Inbox, other mailboxes (with List-serve Mail) seem to work ok… but the Inbox Search is what I really care about.
Any ideas about fixing this? Thanks in advance,
Paul

This is very dissapointing.
How can I delete my Mail App and re-install it????????
My mail App on my MacBook Pro 10.8 is working now
But I can not get my Mail App to search anything to display 2013

M177fw wireless not working for scanner only-have same printer in second location

I have this exact same MFP laserjet in another location that works perfectly over the wifi network. I just purchased the same printer for a second physical location and installed it. I gave the new printer a different name when I installed the device. Printing over wifi works perfectly from two laptops. The copy function works perfectly. I cannot get the scanner to work at the new location from either laptop.
When I installed the software on one of the laptops, I got a message that the driver was already present and suggested I use the existing version already installed. So I used the already installed software. For this laptop, I have a shortcut from the start menu called HP Scan. At the original location, this works fine over wifi. For the new printer at the new location, when I start HP Scan from either the HP folder or the shortcut, I get a box titled "Scanner Unreachable. Scanner communication cannot be established..." and suggests updating the IP address. I looked at the printer configuration and the ip address is correct.
I reset the printer to the factory settings, rebooted the modem and configured the printer again, hoping that the correct IP address would populate correctly, but I have the same problem. So my questions are:
-Is it likely that the IP address is the problem for the scanner and how do I fix it?
-If it is the IP address, what can I do to not have to manually change it each time I go to a different location?
-If not, what is the likely problem? What can I do to fix it?

Hi,
As you mention "When I installed the software on one of the laptops, I got a message that the driver was already present and suggested I use the existing version already installed.", such a message is common for adding a printer from the Windows Add a Printer wizard, may you added it by clicking add printer under Devices and Printers?
If so, that may explain the issue as the printer should be added via the HP Software for the HP Scan to operate.
Be sure to remove the newly added device first by right clicking it and selecting Remove Device, then reboot your PC.
From the Start menu select HP and open the printer folder. then select Reconfigure your HP device.
Follow the steps on screen to add the printer on your current location and check if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Edit to Tape not working for me!!! PLEASE HELP!!!!!

Hey everyone,
I've researched this in many forums and have found what could be the answer, only to try and still get NOTHING!!!
When I drag seq. to ETT window I get the pop-up but 'insert', 'assemble', and 'preview' are kind of greyed out, and don't let me drop anything in, i.e sequence from browser, from viewer, clips, etc.
GOAL:
To Output Final Sequence from FCP6 to DVCPRO HD Tape, (Panasonic 1200a Deck). WITH TIMECODE for Broadcast at 29.97/59.94!!
SPECS:
*MAC PRO-*
Quad Core Intel Xeon Processor
3 Ghz
2 Processors
8 cores
L2 Cache per proc. 8MB
Memory-8GB
Bus Speed 1.33 Ghz
Boot Rom Ver. MP21.007F.B06
SMC Ver. 1.15f3
*FCP Ver. 6.0.2*
*AJA KONA 3 Ver. 5.1*
Digital out – 720p 59.94
Control – Playback timing /Genlock - Freerun
Codec – Pattern 2:3:3:2
Timecode - Input ---RP188 LTC
- Output--- Use QT Timecode is UNCHECKED
- 30 FPS DF
*Panasonic DVCPRO HD AJ-HD1200A*
Timecode Settings –
TCG MODE – REGEN
RUN MODE - REC
TC SOURCE - INT
Footage was shot 720P 24PN on Panasonic HVX200. Ingested via P2 Cards/P2 Store, (W/ REMOVE ADVANCED PULLDOWN FRAMES checked).
Project was edited in a 23.98 timeline.
Have tried: Exporting to QT at both 29.97 and 59.94—then re-importing into FCP with a new timeline w/ matching settings.
I have been told that FCP doesn’t produce TC ‘going out’ and that essentially we are looking to 'MATCH-EDIT' to timecode on tape.
I have Black and coded tape to 00:58:50;00
Project In point is 00:59:00;02 --for all intents/purposes this is a test seq. so OUT point is 01:01:00;07
I have complete Deck Control in FCP but, the problem I’m having is not being able to use the “Edit to Tape” func. In FCP. I can Black and Code the beginning of the tape, and the “ETT” window shows the corresponding timecode on the deck, but when I go to drop the sequence in the ‘Insert’ or ‘Assemble’ drop box, I get nothing? I don’t know if it’s the settings in the DECK, KONA CARD or FCP??
PLEASE HELP!!!!!!SHOW AIRING in 2 DAYS!!!!
Thanks
Zack

That deck cannot do insert editing or assemble editing with proper show time to the 1200 deck. That is that decks big weakness. Only the 1400 deck has this ability. You'll have to crash record and then get the tape dubbed at a dub facility with the proper show code.
TRUST ME...I have been down this path.
Shane

I have recently noticed that my MacBook Pro Retina keeps freezing. I first noticed that the track pad would not work for short periods of time. Is anyone else having a problem?

My MacBook Pro Retina keeps freezing up. It seems that it is happening more often as time goes on.
I first noticed that the track pad would freeze then whole computer would completly freeze.
Most annoying.
Is anyone else having a similar problem?

Hey B-bram,
For issues with video resolution not being consistent, I would start with resetting the NVRAM on your MacBook Pro. That will reset the resolution to its default as well as resetting other default settings like sound volume and start up volume. Take a look at the article below for more information about that and how to perform the NVRAM reset.
How to Reset NVRAM on your Mac
http://support.apple.com/en-us/HT204063
Take care,
-Norm G.

New iPad is not working for iMessage and FaceTime ?? Help

Just purchased the new iPad today it will not let me sign on to iMessage and FaceTime but I am connected on wifi .... Help.

Using FaceTime
http://support.apple.com/kb/ht4319
Trouble-shooting FaceTime
http://support.apple.com/kb/TS3367

DBMS_PARALLEL_EXEUCTE is not working for insert query.. Need help !!

Hi All..
I am trying to use the dbms_parallel_execute package to insert into my target table.
But at the end of execution, the rows not getting inserted into the target table.
Could any one please help on this?
Below are the statements....
create table target_table as select * from source_table where 1=0;
--source_table has 100000 rows.
BEGIN
DBMS_PARALLEL_EXECUTE.create_task (task_name => 'test1');
END;
BEGIN
DBMS_PARALLEL_EXECUTE.create_chunks_by_rowid(task_name   => 'test1',
                                               table_owner => 'SYSTEMS',
                                               table_name => 'TARGET_TABLE',
                                               by_row      => TRUE,
                                               chunk_size => 10000);
END;
DECLARE
l_sql_stmt VARCHAR2(32767);
BEGIN
l_sql_stmt := 'insert into PRD_TAB
     select * from dbmntr_prd_tab';
DBMS_PARALLEL_EXECUTE.run_task(task_name      => 'test1',
                                 sql_stmt       => l_sql_stmt,
                                 language_flag => DBMS_SQL.NATIVE,
                                 parallel_level => 10);
END;
After executing the above statement, I can find the targt_table has zero rows.. Could anyone please correct me If I am wrong with any of above statements?

Could anyone please correct me If I am wrong with any of above statements?
As Hoek said you haven't created the SQL statement properly. See the 'RUN_TASK Procedure section of the DBMS_PARALLEL_EXECUTE chapter of the doc
http://docs.oracle.com/cd/E11882_01/appdev.112/e16760/d_parallel_ex.htm#CHDIBHHB
sql_stmt
SQL statement; must have :start_id and :end_id placeholder
That doc has an example in it.

HT2589 i can sign into itunes using my appleID, but my appleID does not work for the app store . . . help??

help

Hello nick,
Thanks for dropping by our Support Community!
The following article would be a great place to start in your efforts to restore the iTunes Store's functionality to your computer.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

Allow Custom Text Entry for Drop down not working For Dynamic form

Dear All,
In drop down field Allow custom text entry is working fine if the form is save as a static pdf form file.But if the form is save as a Dynamic pdf form file it is not working.I can enter custom text in drop down field but after filling it up when I click on next field the text from the drop down is disappearing.
If any body can please help me to solve this problem.
Thanks a lot in advance
Regards
Rakesh

Dear Jimmypham,
Thanks a lot for your quick response.But it's not working for me.I have even tried with a form having only single field and save it as a dynamic pdf file.In that form also it's not working.The text which I have entered is disappearing when I click outside of this field.
Can you please help me to find out the solution for this problem.
Regards
Rakesh

SPSecurity.RunWithElevatedPrivileges Not Working for Read Only Permissions Users

I have the following code in a method that generates tabbed web parts on any page in SharePoint 2010.
The problem is that it will not work for users who have Read access only on a SharePoint site. It will work when those users have Contribute access.
So even though I have elevated permissions in the code it does not actually elevate the permissions at the point where it is needed.
if (panel != null)
try
using (SPLimitedWebPartManager wpManager = SPContext.Current.Web.GetLimitedWebPartManager(HttpContext.Current.Request.Url.ToString(), PersonalizationScope.Shared))
try
// Elevated previleges required for EXPORT and IMPORT. Else Users with normal read access will get errors.
SPSecurity.RunWithElevatedPrivileges(delegate()
// Retrieve the web part titles in the ConfigureTabs XML string for this tab.
var webPartTitles = from t in xDocument.Descendants("webPart")
where (string)t.Parent.Attribute("name") == (string)e.Item.DataItem
select (string)t.Attribute("title");
foreach (string wpTitle in webPartTitles)
foreach (System.Web.UI.WebControls.WebParts.WebPart webPart in wpManager.WebParts)
// Find the matched closed web part in WebParts collection
if (webPart.Title == wpTitle && webPart.IsClosed == true)
string errorMessage;
//ADD EXPORT PROPERTY
webPart.ExportMode = WebPartExportMode.All;
MemoryStream stream = new MemoryStream();
XmlTextWriter writer = new XmlTextWriter(stream, System.Text.Encoding.UTF8);
// Export the closed webpart to a memory stream.
wpManager.ExportWebPart(webPart, writer);
writer.Flush();
stream.Position = 0;
XmlTextReader reader = new XmlTextReader(stream);
// Import the exported webpart.
System.Web.UI.WebControls.WebParts.WebPart newWebPart = wpManager.ImportWebPart(reader, out errorMessage);
reader.Close();
writer.Close();
// Show the imported webpart.
panel.Controls.Add(newWebPart);
break;
catch (Exception ex)
// For debugging use only.
Label label = new Label();
label.Text = "Please check your XML configuration for error. " + Environment.NewLine + ex.Message;
panel.Controls.Add(label);
catch (Exception ex)
// For debugging use only.
Label label = new Label();
label.Text = "Please Check SPContext.Current.Web is not null. " + Environment.NewLine + ex.Message;
panel.Controls.Add(label);
This snippet of code was originally pulled from a microsoft technet article on creating Tabbed web parts "the correct way" but it doesn't work in all scenarios.
Is there a way to get this code working for Read/Visitors to a SharePoint site?

From initial observation what I see is that your SPLimitedWebPartManager is not created from an elevated web. Try like below
SPSecurity.RunWithElevatedPrivileges(delegate()
using(SPSite elevatedSite = new SPSite(SPContext.Current.Site.ID))
using(SPWeb elevatedWeb = elevatedSite.OpenWeb())
using (SPLimitedWebPartManager wpManager = elevatedWeb.GetLimitedWebPartManager(HttpContext.Current.Request.Url.ToString(), PersonalizationScope.Shared))
{ //Rest of your code
Geetanjali Arora | My blogs |

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?, USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ? Anyone can help me plz?

Hi, is this a question" Post?
or are you just offering an insight into your Mouse Issue?
Generally and at times we all have little idiosyncrasies appearing with the running of our Macs.
I use the same Logitech BT with my MBP. MB & iBook..(not at the same time) Only ever had one issue
and the cure was to completely Delete the mouse from BT -> Repair Permissions & Reboot then Re Install the BT mouse..Ihave just put a new set of batteries in the Logitech (only 2nd set ever)...L

CsrAttachmentUploadDiv part attachment is not rendered SP 2013(Attach file in not working for all the list forms)?

csrAttachmentUploadDiv partattachment is not rendered SP 2013(Attach file in not working for all the list forms)?
Ravi
function ShowPartAttachment() {
ULSopi:
    if (document.getElementById("part1") == null || typeof document.getElementById("part1") == "undefined") {
        alert(Strings.STS.L_FormMissingPart1_Text);
        return;
    (document.getElementById("part1")).style.display = "none";
    (document.getElementById("partAttachment")).style.display = "block"; //problem here

Am also facing the similar problem....any iputs are highly appriciated.
Issue..
1) Defined the attachment type in IMG.
2) Added the attachment type "SFREEATTM" by selecting other attributes---> Attachment Types.
3) Attached the excel file in the design.
See the screen shot below:
The Issue is when testing through tcode nwbc in the inbox the attachment tab is not visible after selecting the particular form.
Please see the screen shot below:
Did i miss any Configuration?? Please suggest...
Regards,
Naveen

EP6.0 SP2 to EP 7 upgrade - UWL not working for PCR approvals

Hi there,
Following the EP 7.0 migration, the UWL is not working for PCR approvals. Following the registration of the WebFlowConnector, using the default configuration, clicking a PCR approval item in the Inbox brings up the following error:
HTTP handler for starting an external service cannot be read
In order to rectify this, the following configuration file was uploaded.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd' [ ]>
<UWLConfiguration version="1.0">
<ItemTypes>
    <ItemType name="uwl.task.webflow.TS50000075" connector="WebFlowConnector" defaultView="defaultView" defaultAction="launchIView" executionMode="default">
      <ItemTypeCriteria systemId="D46CLNT080" externalType="TS50000075" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchIView" handler="IViewLauncher">
          <Properties>
            <Property name="iview" value="com.sap.pct.hcm.isrdispatcher.default"/>
            <Property name="openInNewWindow" value="yes"/>
          </Properties>
          <Descriptions default="launchIView"/>
        </Action>
      </Actions>
    </ItemType>
</ItemTypes>
</UWLConfiguration>
Following the new configuration, clicking the item HAS NO EFFECT i.e. no window, no action, nothing. The only available option available is an option to Forward the item.
I have tried the following ItemType names with the same result:
1. uwl.task.webflow.TS50000075.D46CLNT080
2. uwl.task.webflow.D46CLNT080_TS50000075
Has anyone encountered this before?
Cheers
John

FYI. The problem seems to be occuring as a result of the running EP7.0 with a SAP R/3 46C backend.
I did manage to get this working in the end. I had to create an iView say "myISRDispatcher" based on the portal component com.sap.pct.hcm.isrdispatcher.default. Update the UWL configuration to refer tot his PCD location as shown below:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd' [ ]>
<UWLConfiguration version="1.0">
<ItemTypes>
    <ItemType name="uwl.task.webflow.TS50000075" connector="WebFlowConnector" defaultView="defaultView" defaultAction="launchIView" executionMode="default">
      <ItemTypeCriteria systemId="D46CLNT080" externalType="TS50000075" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchIView" handler="IViewLauncher">
          <Properties>
            <Property name="iview" value="pcd:portal_content/myISRDispatcher"/>
            <Property name="openInNewWindow" value="yes"/>
          </Properties>
          <Descriptions default="launchIView"/>
        </Action>
      </Actions>
    </ItemType>
</ItemTypes>
</UWLConfiguration>

Go daddy imap not working for inbox- I have checked ports, help anyone?

Similar Messages

Maybe you are looking for