Go-openoffice and languages

hi to all
i'll trying GO-OO but i don't know how to install IT-language; how i can do it ?

langpacks are seperate, not extensions. only a feu upstream shipped dictionaries are shipped as extensions.
so look out in AUR for a pkg or use one from a different language in AUR and modify it to your needs.

Similar Messages

Problem with set-up: Blackberry ID- country and language

Hello, I am setting up my Playbook tablet for the first time and have hit a snag on the third or fourth screen. I am supposed to enter my country and language for Blackberry ID, but I see only 'No country indicated' and I find no way to enter a country and language, as prompted. According to the tutorial, this screen should show a language option immediately. I went to get a Blackberry ID, through my e-mail address but it is obviously not 'connected' in any way (yet) to my Playbook tablet.
I hope someone might help me with this and I will certainly appreciate said help! Must say the obvious, I am new to this forum, but I am sure I am posting my question in the right forum.
Thanks a lot!
Solved!
Go to Solution.

No worries, It could have been that you lost connection. Doing this will make sure that you are connected. Sometimes you may need to delete the connection and try setting up again and then going further will display what you are looking for.
Regards,
Nick
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Desktop Software does not detack BB 6 System Software and Language

Hi,
I wanted to install other languages back to my phone (currently only English). However, my Desktop Software 6.1.0.36 installed in Vista does not detect and display BB 6.0.0 system software, and so is language option. BI can see other installed software, even the application installed a day ago, but just cannot see the OS and language.
I tried installed the Desktop Software to other PC, but they were not detected and displayed either. I checked with my other friends, they are able to see the System OS and Language. What can i do ? Anybody encounter the same problem ?
Thanks.

Kindly look for the device requirement online and see if your pc met all the needed requirements.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Object Custom Program Name of class RE and language EN does not exist

Hi All,
We are getting this bbelow error while running a custome program ,
Object <Custom Program Name> of class RE and language EN does not exist
Do any one has faced this similar issue earlier.
Regards,
Sen

Hi,
How did you resolve this problem ?
Re: Object <Custom Program Name> of class RE and language EN does not exist.
I am also encountering the same issue when I am executing the report.
Regards,
SSR.

What are the major differences b/w live copy blueprint and Language copy of CQ ?

We are in process of creating a different Language Versions of a Website and trying to figure out the best/recommended approach.
what are the major differences b/w live copy blueprint and Language copy of CQ ? which one is recommended in which ? any pointers on this would be appreciated.

The language copy tool is a one-shot tool to create pages under a certain structure. It has a nice UI for it. But that's it.
The MSM blueprint/livecopy concept is much more powerfull, because it has live connections between the blueprint and the livecopy. It does not only allow you to easily create livecopies, but supports you also in maintaining the relationshop between these. So you can easily detect, that the blueprint page has been updated and needs to be rolled out again. Or that there are conflicts, because both blueprint and livecopy have been updated independently. And so on.
From my perspective the language copy tool should not be used, because with creation of language pages the "fun" has just started and the real work is just ahead.
Jörg

Keep client and language information for login after timeout

Hello experts,
i'm using the url parameters sap-client and sap-language that the user can login without them. The parameters are filled on a mobile device and on different plants these parameters are different. When the user logout with the logout button the method server->logoff( ) will be called in the main controller. Then a logout view will be called that redirect the user to the login page and fill the parameters into the url again.
My problem is when a session timeout occurs or the session will be closed manually the login screen appears again after the next request, but with the default client and language.
I'm looking for a way to fill these parameters when a timeout occurs.
Thanks and best regards,
Tobias

I found a working solution for my problem. With the following code in the do_init method of my main controller, the url will be renewed right after the login:
DATA: lv_url   TYPE string,
      lv_tmp   TYPE string,
      lv_laiso TYPE t002-laiso.
lv_url = me->co_controller_name.
lv_tmp = sy-mandt.
CALL METHOD cl_http_server=>append_field_url
EXPORTING
    name = 'sap-client' ##NO_TEXT
    value = lv_tmp
CHANGING
    url   = lv_url.
CALL FUNCTION 'CONVERT_SAP_LANG_TO_ISO_LANG'
EXPORTING
    input = sy-langu
IMPORTING
    output = lv_laiso.
TRANSLATE lv_laiso TO LOWER CASE.
lv_tmp = lv_laiso.
CALL METHOD cl_http_server=>append_field_url
EXPORTING
    name = 'sap-language' ##NO_TEXT
    value = lv_tmp
CHANGING
    url   = lv_url.
CALL METHOD me->response->redirect
EXPORTING
    url = lv_url.
CALL METHOD me->navigation->response_complete.

Default values for the controlling area and language

Hello
I have a query.
I need to set default values for the controlling area and language in the screen
"find account assignment data 1"
Is it possible to do so?
Thanks.
Jayawant Gokhale

Hello
To clarify,
This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
Could someone throw a light on this.
Thanks.

The tablet didn't accept country and language selection

when I start with my tablet , i have faced to problems:
1- it didnt accept the language and country selection in the ID agreement page. when i select it goes back to none selected
2- the divice is over heated at the back

During the initial setup of the BlackBerry PlayBook tablet setup, the user is prompted to select a country for the BlackBerry ID agreement. When a country is selected the following error is displayed:
Unable to display the BlackBerry ID Agreement. Please select your country and language, then try again.
If attempting to connect the BlackBerry PlayBook to a Wi-Fi Hotspot, the username and password must be entered to obtain internet connectivity.
When the BlackBerry PlayBook tablet has successfully connected to a Wi-Fi HotSpot, the following Hotspot Setup button appears at the bottom left:
Click on the Hotspot Setup button, and this will open a window to enter the username and password.
For additional information on Wi-Fi setup, please refer to the following knowlage base article:
KB26228 - Getting started with BlackBerry PlayBook tablet initial setup
KB26096 - Troubleshooting Wi-Fi and networking on the BlackBerry PlayBook tablet
The BlackBerry PlayBook tablet is running an unsupported software version. Update the BlackBerry Tablet OS using BlackBerry Desktop Manager 6.0.2, only if the BlackBerry PlayBook tablet is running
It might take up to tree hours to update the tablet software. During that time, the BlackBerry PlayBook tablet should not be disconnected from the computer.
1. Confirm the BlackBerry PlayBook tablet is running only 1.0.1.1309
    a. When a succesful Wi-Fi connection is establish, click on the Diagnostic gear icon on the bottom right.
    b. In the Diagnostics screen, select Device Information under Information Type
    c. Confirm the SCM Version is 1.0.1.1309
    d. If it is 1.0.1.1309, proceed to Step 2. Do not continue if it is not version 1.0.1.1309.
2. Connect the BlackBerry PlayBook tablet to a computer running BlackBerry Desktop Manager 6.0.2.
3. On the home screen of the BlackBerry Desktop Software, click Update.
        To download an update, click Get Update.
        To view other available versions of the BlackBerry Ptablet OS, click View other versions. If applicable, click another version. Click Install.
4. Select the Email me when new versions are available check box to receive an email when an updated version of BlackBerry Tablet OS is available.
5. Click Install update.
When a confirmation message that the update is complete is displayed, disconnect the BlackBerry PlayBook Tablet.
A reset of the BlackBerry PlayBook tablet may be required to get the reload to begin.
hope this help!

Get Locale country and language codes

I have checked the documentation, but nothing is jumping out
at me. Is there a function that returns the locale country and
language codes? GetLocale() returns the "locale name as it is
represented in ColdFusion":
ie:
English (US)
Spanish (Standard)
What I am looking for is the
ISO
codes
en US
es ES
I can get the information using getPageContext(), but just
wondered if I was overlooking a built-in CF function.

-==cfSearching==- wrote:
> The problem with the functions I have seen is that they
return
locale name
> as it is represented in ColdFusion (ie English (US)
). But what I am
> looking for the ISO language and country codes.
...hmm this didn't go thru on the 16th. let me try again.
that should only be for the "traditional" cf supported
locales (backwards
compatibility is always foremost in the cf team's minds), the
rest should be in
normal java style locale ID (th_TH, ar_AE, etc).
no, there's nothing built-in in cf for what you want. you'll
have to dip down
into java:
<cfscript>
localeObj=createObject("java","java.util.Locale");
locales=localeObj.getAvailableLocales();
writeOutput("<table border='1'>");
writeOutput("<tr align='center'><td
colspan='2'>Locale</td><td>Language</td><td>Country</td></tr>");
for (i=1; i LTE arrayLen(locales);i=i+1) {
thisLocale=locales
thisLanguage=thisLocale.getLanguage();
thisCountry=thisLocale.getCountry();
writeOutput("<td>#thisLocale.toString()#</td><td>#thisLocale.getDisplayName()#</td><td>#t hisLanguage#</td><td>#thisCountry#</td></tr>");
writeOutput("</table>");
</cfscript>
note that this snippet doesn't show variants (eg. th_TH_TH)
& shows language
only locales (en, fr, etc.), nor is it sorted in any order i
can recognize. also
keep in mind that what this shows depends on the server's JRE
version. if you
want a "better" source of locales, use the icu4j lib's
ULocale class. it's based
on the latest CLDR & contains way more locales (and they
actually tend to fix
locale bugs in your lifetime).

Regional and Language Settings for Window and BEX Style

Hi All,
When I change the Regional and Language Settings for Windows, Standards and Formats value to English (USA) the standard Style for BEX is active. For instance, input-ready cell is bordered with blue. But when I switch to Turkish this style is not active.
Additionally, I have to change Style for each Workbook one by one. How can we adopt a style to every workbook.
Regards,

Lars,
This is a setting on the 'Defaults' tab in the User Profile. This can be set when a new user is set-up in SU01, or it can be changed by each user according to personal preference in SU3. I'm sure there is a system table where these settings are stored that could probably be edited for all users, if that is desired, but I don't know which table that would be off the top of my head.
Hope this helps...
Bob

How to make the Region and Language | Location | Current Location selected by "country or region" selection

Hi,
I have built a Windows Embedded Standard 7 image that includes multiple language packs for the countries that we support. When I sysprep this image and reboot, I am prompted for my language (a screen appears with many selections like "My language
is English"). Once I select my language and select next, I am prompted for "Country or Region", Currency and Keyboard. For some unknown reason the "Country or Region" selection only affects the setting under "Region
and Language" | Administrative | "non-Unicode programs", it does not affect the setting setting under "Region and Language" | Location | "Current Location".
Is there a way to modify my image such that the "Country or Region" selection is used for the location setting?
Thanks,
Brent

Hi,
You can follow the content of these link below to set system location during Windows Deployment:
Configure International Settings in Windows:
https://technet.microsoft.com/en-us/library/hh825705.aspx
Regional settings default to English when deploying a virtual machine using a template on System Center 2012 Virtual Machine Manager:
https://support.microsoft.com/en-us/kb/2709539
Windows Deployment sample OOBE.xml file:
https://technet.microsoft.com/en-us/library/dn621901.aspx
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Locale and language

I am having trouble getting locales and languages to work as I would expect them to. I have created a tiny application (I'm a faces newbie still) and a bunch of localization files:
message.properties
messages_en.properties
message_fr.properties
messages_en_GB.properties
I add all of these languages to the faces-config.xml file setting the en_GB to be the default. When I set my browser to en_GB it picks up the file as I would expect. When I set it to fr I get the french version but I have to restart the server (Tomcat 5.0.18 running under Netbeans) to make it switch over. I would have thought that since the browser is now sending up a different locale faces would just switch automatically to using a different bundle without a restart but it seems to remember some how. This may be due to the incremental redeploy into tomcat but I'm not convinced as the behaviour is unpredictable.
What I am also confused about is the way defaults are dealt with. In the Core JavaServer Faces book it says that the base properties file will be used if a matching language resource can't be found. My observation is that it uses the default specified in the faces-config file. Is this right?
I'm also curious to know what happens when a non-exact match is sent up. For instance which resouce bundle, of the four listed, would be chosen if a browser specified en_US?
Thanks

I had this problem this week. I guess this is a problem with Netbeans and Tomcat. When Netbeans detects your system language (LANG environment variable in Linux, for instance), its bundled Tomcat "sticks" with this locale and can't change it. If you try to run it with an external Tomcat, it may work.

Object Program Name of class RE and language EN does not exist

Hi,
I'm encoutering this problem.
Object <Custom Program Name> of class RE and language EN does not exist
This appears when i am executing the report .
Has anyone encoutered this? How did you resolve this problem?
Any pointers in this regard are appreciated.
Regards,
SSR.

Hi,
This must be coming from the one of the function module exceptions that you are calling in the method. Put break points at all function module calls and find out the reason.
Thanks,
Naveen Inuganti.

What do I convert to if I only have OpenOffice and not Word?

What do I convert my pdf files to if I only have OpenOffice and not Word?

Hi sulezyf,
OpenOffice and Word documents have the same extension i.e .doc
You can convert the pdf to .doc format.

My iphone app store is downloading apps in french but my language is portuguese . I changed country and language even though they were already in portuguese and brazil. Don't konw what to do anymore . I bought some apps and they all are in french .

Hi , my iphone app store is downloading apps in french instead of portuguese . I checked my country and language in settings and they are right . Don't know what to do anymore. I even bought some apps and they are also in french .

Follow this link for the Bionic ICS user guide; if you have issues/questions, you may want to do a search on this forum as there are already several threads/remedies. If a search doesn't answer your question, submit a post.
https://community.verizonwireless.com/message/893011#893011

Go-openoffice and languages

Similar Messages

Maybe you are looking for