"Go to Report" action fails for specific user.

Hi all,
I have Sharepoint 2010 in Integrated Mode with Reporting Services 2008 R2 running in ReportViewer webparts.
In many reports I have a "Go to Report" action that work fine.
Until now all of our users were able to use the "Go to Report" action. However, now for the first time there is a user that is not taken to the target report, but instead is taken to the site default page (the url that is also displayed when I
mouse-over the link). I have tested and in my browser (same version) it works ok.
Is there a setting in IE9 that can prevent or interrupt the Go to Report action?
Many thanks.
Jacco Bloemendaal

Hi Jacco,
Please check if this issue also persist in other browser. It is may be due to compatibility issue. Please refer to the following steps to set browser open all intranet sites with Compatibility View mode automatically.
1. Launch the IE 9, and press Alt+T to select the Tools.
2. Click Compatibility View settings.
3. Check the “Display intranet sites in Compatibility View” option, and click Close.
There is a similar issue, you can refer to it.
https://connect.microsoft.com/SQLServer/feedback/details/671138/ssrs-2008-r2-sharepoint-2010-ie9-no-export-submenus
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Similar Messages

How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR

Hi,
How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
Regards
Anil Kumar

Hello there Anil,
A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
maybe 60 days to so, watch the DB size).
To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
In your search scope you can use the following XPath to play with.
- All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
- All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
You can play with the "RequestStatus".
Hope this helps.
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.]

Tacacs authentication fails for one user account for only one switch

Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
              Socket opens:        157
             Socket closes:        156
             Socket aborts:        303
             Socket errors:          1
           Socket Timeouts:          2
   Failed Connect Attempts:          0
        Total Packets Sent:       1703
        Total Packets Recv:       1243
          Expected Replies:          0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
Prasey

Hi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad

Hide settings icon for specific users

Hi
In share point 2013 we have settings icon at top right corner.
Is there any way, I can hide this icon for specific users.
Please help in this regard.
Thanks,
Anil

Hi Kumar,
Its possible.
1.Open the .master page in some textpad/SP Designer.
2.Look for below tag. This is the holder for SITE ACTIONS
<SharePoint:SiteActions
3.Look for the Menu item templates. These will clearly give you an idea on wht they will hold.
<SharePoint:MenuItemTemplate
4.There will be 2 attributes for each menu item called
PermissionsString & PermissionMode.
In the permission string give the required permission to the user to be shown or hide.
http://sharepoint.stackexchange.com/questions/66628/edit-settings-gear-icon
Please remember to click 'Mark as Answer' on the answer if it helps you

How to apply Software Restriction policy for specific user in local group policy object ?

I am working on implementing user based software restriction policy programmatically for local group policy object.
If i create a policy through Domain Controller,i do have option for software restriction policy in user configuration but in local group policy editor i don't have option for that.
When i look for the changes made by policy applied from Domain Controller in registry, they modifies registry values for specific users on path HKEY_USERS\(SID of User)\Softwares\Policies\Microsoft\Windows\Safer\Codeidentifiers
They also have registry.pol stored in SYSvol folder in Domain Controller. When i make the same changes in registry to block any other application, application is getting blocked.
I achieved what i wanted but is it right to modify registry values ?
PS:- I am using Igrouppolicyobject API

I achieved what I wanted but is it right to modify registry values ?
You also can modify a registry programmatically based policy. Check this:
http://blogs.msdn.com/b/dsadsi/archive/2009/07/23/working-with-group-policy-objects-programmatically-simple-c-example-illustrating-how-to-modify-a-registry-based-policy.aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Find Label Missing in Advanced Search For Specific User

for specifi users FIND label is showing but some of the users in advanced search this find label is missing . top of the applictaion it is there
plz let me know why this is problem is coming
find button should visible to all users......................
give me repaly ASAP

Hi
CRM 5.0
its not related to application,modification ..but my problem is the find label is working for some of the users.but some of the users find label is not there,
plz let me know where i have to make corrections for this problem........

Report server failed service specific error 186

Gurus!
I am using oracle 9iAS enterprise,
Report server failed service specific error 186
Kindly help!

I believe you'll need to edit your tnsnames.ora file located in \ORACLE\806\NET80\ADMIN. The last line of this file should read something like
Rep60_SYSNAME, Rep60_SYSNAME.world = (ADDRESS=(PROTOCOL=tcp) (HOST=SYSNAME) (PORT=1949))
where SYSNAME is the name of the PC Reports is installed on.
I had this same error, and once I modified this file, everything seemd to work fine.
Good Luck
[email protected]

Data Level security for specific Users

Hi,
Can you please suggest some ideas on by-passing the Data Level security for specific users or specific group?
Currently, we have data level security defined on a group permissions for one group and for people belonging to another group, the security should not apply and they should see entire data.
But, key thing here is that, the user belongs to both the groups.
Any ideas helps.
Thanks,
Chandu.

So you are saying you want a user to belong to a group with data-level security filters, but you don't want the filters to apply to that user?
Why are they in the group then?
Are the data filter defined with variables or are the hard-coded?
If variables, you may be able to put logic in initialization block to set the variable appropriately for specific users.
I'd rethink the security model - when I define data level security filters, I tend to force users to only belong to a single group/role.

Hiding P0002-PERID for specific users

Does anyone know how to hide the social security number field field for specific users? We are trying to hide it both at the header level and detail level of IT 0002.
Thanks

Jeff,
Follow this link http://www.*********************/hr_security/hr_security.htm, otherwise request your SAP Security person/team.
Thanks,
Kiran.

Log transactions for specific users

Hi, How can I get the log for specific users, such as SAP_ALL : I want to know which transactions they have accessed in the last month for example or if they have accessed to a specific transaction.
Thks !

Hi,
try tranction ST03N (Workload Monitor)and select "User Profile" in the Analysis View. There, you can see a list of Users. Double click on any of them to see the accessed transactions.
Kind regards
Dirk

Disable sound for specific users

How do I disable sound for specific users?

Theoretically if the user's not in the audio group, he shouldn't have access to sound devices.
$ ll /dev/snd/
total 0
drwxr-xr-x 2 root root 80 Oct 2 19:30 by-path
crw-rw----+ 1 root audio 116, 2 Oct 2 19:30 controlC0
crw-rw----+ 1 root audio 116, 8 Oct 2 19:30 controlC1
crw-rw----+ 1 root audio 116, 7 Oct 2 19:30 hwC0D0
crw-rw----+ 1 root audio 116, 13 Oct 2 19:30 hwC1D0
crw-rw----+ 1 root audio 116, 14 Oct 2 19:30 hwC1D1
crw-rw----+ 1 root audio 116, 15 Oct 2 19:30 hwC1D2
crw-rw----+ 1 root audio 116, 16 Oct 2 19:30 hwC1D3
crw-rw----+ 1 root audio 116, 4 Oct 4 09:12 pcmC0D0c
crw-rw----+ 1 root audio 116, 3 Oct 4 10:13 pcmC0D0p
crw-rw----+ 1 root audio 116, 5 Oct 2 19:30 pcmC0D1p
crw-rw----+ 1 root audio 116, 6 Oct 2 19:30 pcmC0D2c
crw-rw----+ 1 root audio 116, 9 Oct 2 19:30 pcmC1D3p
crw-rw----+ 1 root audio 116, 10 Oct 2 19:30 pcmC1D7p
crw-rw----+ 1 root audio 116, 11 Oct 2 19:30 pcmC1D8p
crw-rw----+ 1 root audio 116, 12 Oct 2 19:30 pcmC1D9p
crw-rw----+ 1 root audio 116, 1 Oct 2 19:30 seq
crw-rw----+ 1 root audio 116, 33 Oct 2 19:30 timer

MIGO - Challan NO : Feild mandatory for specific user

Hi Experts,
I want to make the Callan No in the MIGO as mandatory for specific users.Can any body tell me how to do this ?
Regards,
Lakshmi.

Dear
There is two possibility.
1 - SPRO->Material Management->IM and PI-> Settings for enjoy transactions ->settings for goods Movements (MIGO)->Field selection for MIGO.Then against Field name choose the radio button Req.
This will impact for all the user.
2 - If you would like to restrict for particuar user than use of SHD0.
Create screen/transaction variant of MIGO through SHd0. In this put your req. field compulsory.Revoke the authorization of MIGO from particular user and assing the new transaction code done through SDH0 to this user.
Due to this you can control req. entry in MIGO for particular user.
Regards
Rajan

Need SP_TN for specific user must use specific document series and warehouse in Marketing Documents

Hi experts,
   I need SP_TN for specific user must use specific document series and warehouses in Marketing Documents SAP B1.
   Kindly give solution ASAP.
Thanks in advance

Hi Nagarajan,
   It show (1) Not allowed to add PO.
   I used the following SP
IF @object_type = '22' AND @transaction_type IN (N'A',N'U')
BEGIN
IF Exists
(SELECT T0.DocEntry FROM POR1 T0 INNER JOIN OPOR T1 ON T0.DocEntry = T1.DocEntry
WHERE T1.DocType = 'I' AND T1.Series = '142' OR T1.Series = '145' AND T0.[WhsCode] = 'STEX-01'
or T0.[WhsCode] = 'STNEX-01' and T1.[UserSign] ='1'
and T1.docentry = @list_of_cols_val_tab_del)
BEGIN
SELECT @error = 1
SELECT @error_message = 'Not allowed to add PO'
END
END
warm regards,
Guhan

Disable release flag in service entry sheet for specific users

How can we disable the release flag for specific user/s in Service Entry Sheet(ML81N)?
Can any one suggest?
arjman

Hi dear,
In the ML81N T code, there is an object M_EINK_FRG Release code and code grp.
leave it empty. and assign the Role to the user with whoom you dont want to release the SES.
In this process the system will show you the green flag and also allow you to release the SES but when you will save it the system will give an Error Message about the Authorization.
this will not allow the user to release the SES.
Hope it Helps,
Regards,
Yawar Khan
Edited by: 1234_abcd on Jan 21, 2011 12:40 PM

Lock Transaction for Specifi Users

Dear All,
Good Day,
We are planning to lock the transaction for specific user who doesnot use the transaction more than 3 months.
Please suggest me what will be the procedure.
Thanks in advance,.
Best Regards,
Suresh Kumar K

Hi Suresh,
Your idea of restricting users in using t-code is good practice. But as of now there is nothing like you can restrict user by locking t-code only for tht user/users alone.
1. You can lock the T-code but this will affect entire system.
2, You can remove t-code from the role, but this affect other user and if you wanted to make another role for only this user it will start getting to be tedious job, since you have to delete some roles create some other and alos user may use some t-code once every quarter for some of quarter end results and you have to seperate these t-code from others which was not possible, this will not workout so easily.
The only option could be probably if user doesnot login for more than 3months just lock him.
Regards...

"Go to Report" action fails for specific user.

Similar Messages

Maybe you are looking for