Go to the op of next article

How do I make swipe horizontal to new article go to the top of the article?
I thought it was default, but obviously not.
Nina Storm

Hi Nina, are you talking about swiping to an article that you have already visited. I think it will always end up where you left the article last but by default the first time you enter the page it will always be at the top. Triple tapping the folio name found in the top home/contents bar will reset the article back to default.

Similar Messages

Can't swipe to next article on scrollable frame?

Hi,
I'm not sure what's happening here. I've got a page with a scrolling frame which covers the whole page, frame is set to scrolling, scroll direction is vertical only. I've just updated some of the scrollabe content and now when I view on iPad I can't swipe to the next article, the swipe to next article worked fine yesterday, all content and links work OK I just can't get off the page now... any suggestions?

So Okay,
Excuse the lame design (only 10 minutes of my lunch break left)
So I quickly mocked up a 768x1024 doc (Horizontal)
Made a Scrollable frame 732x952px to sit on the page bleed at the bottom and within left and right margins
Created 4000px Deep worth of fake content (Grouped and pasted into the scrolling frame)
Set to vertical scroll only
Popped a stickly overlay on top and a background image underneath
All in seperate layers.
Imported as a PNG article
and here are the results.
All images are screen grabs and the last demonstrates that even with a scrolling frame this long - if you import as png you can still horizontally swipe off it
All's good!
Tim

How can you prevent that you can swipe to the next article?

Hi,
I'm creating a folio for a fair.
The purpose is that the clients can choose from a menu which "presentation/article" they would like to view. Then when the article is at his end it should go back to the menu at the beginning.
But now when you are at the end of an article and you swipe to the left you automatically go to the next article.
So my question is: Is there a way to put a "stop" at the end of an article so that the people can't swipe further and so they have no other option than to go back or to click on the home button??
Thanks a lot!!

My solution for a simililar scenario was to create a full page, 2-state dumb MSO set to play the slide-show once. Then the home button (or any navigation buttons) was available to tap, while the page itself was resistant to any swipes.

In the vertical page with scrollable content, i can´t swipe to next article. why?

in the vertical version of the page with one scrollable content frame, i can´t swipe to next article. the scrollable content frame has in both versions the exact size of the page. in the horizontal version this works perfectly. Used folio builder v22, pdf and smothscrolling off.
Message was edited by: lost in dps

Thanks for the answer. But i found out, that it was my fault. A status of an object was outside the scrolling content frame. But thank you for the possibilty to ask questions.

How can i remove a name that comes up as the Home user next to the House symbol?

For some reason when the House symbol appears in any incidence on my Mac Pro lap top although it is only me that has ever used it it shows the name Sharon next to the house which isn't mine! I can only presume it has been imported across with other stuff from my old lap top which previously belonged to a Sharon! Does any one know how to change this please? Thanks

Hi BillieBo,
To delete a user folder from your MacBook Pro, follow the directions in this article -
OS X Yosemite: Delete a user
Thanks for using Apple Support Communities.
Best,
Brett L

Swipe to next article in horizontal scroll. frame

Hi,
If the reader reaches the end of an horizontal scrollable frame, the swipe to the next article does not work (neither does two finger swipe work). Instead, swiping to the next page on the end of an vertical scroll. frame works fine (v29 viewer).
One more thing to fix.
Kind regards,
Yves

Yves,
Are you testing in Adobe Content Viewer or a custom viewer? We specifically did work to make swiping to the next article work inside a horizontal scrollable frame.
Neil

Scrollable Content and Swipe to next article Problem.

I have multiple scroll trays on my page that when pulled out take up all the space on the screen. Since interactive content always sits on top of static content how does one workaround not being able to swipe to next article.
At the moment I create dummy buttons that sit on top of the interactive content that have navto properties but my user would not usually figure out to tap instead of swipe to next article.
Thanks for listening to my first post.
Geoff
Paris

This really needs to be fixed especially for vertically scrolling frames when swiping horizontally and vice versa.
With the new choices in the scrollable frame overlay it should be obvious that if you swipe in the other direction you want to go to new page.
Bob

What is the weird symbol next to my battery life meter percentage?

what is the weird symbol next to my battery life meter percentage?

stevejobsfan0123 wrote:
This may be of interest...
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/understand ing-ios-menu-symbols
Can you identify the symbol using the above guide?
(Note that I am a representative of the organization of the above link, which is not endorsed by Apple).
Just a friendly comment that the list described on this link is incomplete. If you are a rep of the site, you should update it to include additional symbols, such as the personal hotspot icon, the LTE icon, and the bluetooth device battery level icon.

I want to do banners ,how can we do when click the same button (next button) it must show differen

i want to do banners ,how can we do when click the same button (next button) it must show different images . cam any one help

Check out my blog with samples on Edgehero.
http://www.edgehero.com/articles/interactivity

Failure of a single article prevents the distribution of all articles in a publication to a subscriber

We have a SQL Server 2012 R2 SP2 environment and Transactional Replication configured with 1 instance publishing all tables in a database via a single publication (circa 150 articles in the one publication). We have a separate distribution instance,
and a third subscription instance. All articles in the publication are configured to copy all data, with no advanced filtering configured. It is also noted that Alerts were not configured in Replication Monitor.
We had an issue whereby, inexplicably, a table on the subscriber vanished (I use this term because I could not find any record in the log file of a DELETE statement being issued against that table - regrettably I wasn't in the position to query the distribution
database for any such commands either).
In Replication monitor we saw that the article for the table in question was failing, but no others.
The issue was that no other articles were being replicated to the subscriber, and this was evident via stalled rowcounts on the subscriber database, but increasing rowcounts on the publishing database.
When we removed the offending article from the publication, all other articles started getting applied to the subscriber database - and we could observe both publication and subscription rowcounts increasing in lockstep.
My questions are:
1) in a single publication with many articles, are the articles applied to the subscription in a single batch - meaning that if a discreet transaction for one article fails, that all other articles will be rolled back with this transaction until it
is cleared.
2) Why would Replication Monitor not start showing widespread warnings for every other table (article) that was not successfully being replicated to the subscriber?
3) Aside from configuring alerts in Replication Monitor (which has happened already) and a bespoke rowcount checking 'monitor', how could Transactional Replication be configured so that the failure of the publication of an obscure article doesn't fail all
articles --> I note that creating multiple publications with smaller number of articles would limit the exposure, but from what I've observed, this would only limit the exposure to those articles in the same publication.
Many thnaks

1) they could be - it all depends on the batch size.
2) I suspect because the distribution agent applies the changes serially, ie one article after another in the order the changes occurred on the publisher. So if it fails on one table it will not continue until this error is leared.
3) use the continue on data consistency error profile, or put your problem article in its own publication.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

I have missing songs that i purchased on my old iphone. they are not in my purchased folder. but in itunes store when i look the song up, it has the purchased logo next to it.... but no way to download it

i have missing songs that i purchased on my old iphone. they are not in my purchased folder. but in itunes store when i look the song up, it has the purchased logo next to it.... but no way to download it

If the songs are still on your ipod, make sure autosync is disabled in iTunes on your computer, connect and right click on it in the device list, then choose "transfer purchases" to copy all bought media and apps from your ipod to your computer.
If the songs are not on your computer and got deleted from your ipod as well, you can't get them back, unless you have a backup of your iTunes library as part of your computer backup.

Getting about $3000 a day in iTunes charges I didn't make can't get history to pull up and can't reach a apple person, scheduled the next available call but it's the 2nd of next year and about 20,000 more dollars from, now went to the iTunes Store no help

My iTunes account is hooked to my debit card and I have thousands of dollars per day coming out of my bank account. I emailed apple several times to get a history so I can find out what the heck is going on and each time I get a generic message followed by a email with a bunch of links telling me how to access my iTunes history. I attempt to do this and I get a message stating iTunes can not be reached. So I go down to my local apple store and am told it's because I did not have wifi, they hook my phone to the apple store wifi and tell me they show no charges. Yet I'm down approximately $12,000 so far and climbing. I call my bank and cancel my debit card and attempt to contact apple again via a link they sent me to schedule a call. When I schedule the call it gives me a message that we are sorry we are unable to schedule a call for you please try again later, I try a future time and date and manage to schedule a telephone call for the second of next year. Is there anyway to access what the **** is going on with my iTunes account in the meantime? Apple doesn't seem to be able to see the charges I just see them on my bank side.
And help is appreciated.

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

Tried purchasing iTunes music. Put in my apple id and password then i was directed to a 'Terms and Conditions' page. I checked the box then clicked the 'accept' button next page read 'your Session has timed out ' try again with a Done button to click on

Tried purchasing music from the iTunes Store. When the window popped up I put in my apple id and password. Then I was directed to a 'Terms and Conditions' page. I checked the box next to the 'Yes I agree to these terms and conditions' - then clicked the 'accept' button next page read 'Your Session has timed out. Try again.' with a 'Done' button to click on. Oh the same thing happens when i try to download free iTunes. Yes I have tried & tried it again I even logged off and singed back in-- no joy
After accessing my iTunes account I was not able to change anything like my credit card number when I tried and was sent right to the 'Your session has timed out. Try again.'
The last time I purchased any anything was on September 25th 2011 and the 'terms & conditions' page was last updated on October 12, 2011
Does anyone have an idea to what is going on with my iTunes version 9.2.1 (5) and I can not upgrade to a higher version my iMac does not have the intel processor chip.Thank you for your time and help with this matter. You are greatly appreciated

I am having the same problem also! I posted on here about it, but no one has responded with ideas. I called technical support and e-mailed them, the only suggestions they gave was for the to turn off my firewall. But I didn't change anything, so it shouldn't suddenly stop working. Maybe this is just an iTunes issue? But it doesn't even recognize my account anymore, and I cannot log in now.
If you happen to get an answer, will you please let me know what works for you?
Thanks!

How to change the header and footer in the Section Breaks Next Page using OpenXML?

I have a word document file in which I added a Section Break of Next Page, now I want to change the header and footer of that page.
Scenario of example, I have a doc file which has four pages with headers and footers and added fifth page in the section break next page, I want to change the header and footer of the fifth page only. This is achievable manually by deselecting the Link to Previous
button in the Word Application but I don't know how to change it using XML?
My code that adds the new page in the section breaks is:
class Program
static void Main(string[] args)
string path = @"C:\Riyaz\sample.docx";
string strtxt = "Hello This is done by programmatically";
OpenAndAddTextToWordDocument(path,strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
using (DocX document = DocX.Load(@"C:\Riyaz\sample.docx"))
document.InsertSectionPageBreak();
Paragraph p1 = document.InsertParagraph();
p1.Append("This is new section");
document.Save();
Please help.

Here is the sample for your reference:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using DocumentFormat.OpenXml;
using DocumentFormat.OpenXml.Packaging;
using DocumentFormat.OpenXml.Wordprocessing;
namespace WordAddNewFooterHeader
class Program
static void Main(string[] args)
string path = @"E:\Document\TestHeaderandfooter-Copy.docx";
string strtxt = "OpenXML SDK";
OpenAndAddTextToWordDocument(path, strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
// Open a WordprocessingDocument for editing using the filepath.
WordprocessingDocument wordprocessingDocument = WordprocessingDocument.Open(filepath, true);
MainDocumentPart part = wordprocessingDocument.MainDocumentPart;
Body body = part.Document.Body;
//create a new footer Id=rIdf2
FooterPart footerPart2 = part.AddNewPart<FooterPart>("rIdf2");
GenerateFooterPartContent(footerPart2);
//create a new header Id=rIdh2
HeaderPart headerPart2 = part.AddNewPart<HeaderPart>("rIdh2");
GenerateHeaderPartContent(headerPart2);
//replace the attribute of SectionProperties to add new footer and header
SectionProperties lxml = body.GetFirstChild<SectionProperties>();
lxml.GetFirstChild<HeaderReference>().Remove();
lxml.GetFirstChild<FooterReference>().Remove();
HeaderReference headerReference1 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = "rIdh2" };
FooterReference footerReference1 = new FooterReference() { Type = HeaderFooterValues.Default, Id = "rIdf2" };
lxml.Append(headerReference1);
lxml.Append(footerReference1);
//add the correlation of last Paragraph
OpenXmlElement oxl = body.ChildElements.GetItem(body.ChildElements.Count - 2);
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
SectionProperties sectionProperties1 = new SectionProperties() { RsidR = oxl.GetAttribute("rsidR", oxl.NamespaceUri).Value };
HeaderReference headerReference2 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.HeaderParts.FirstOrDefault()) };
FooterReference footerReference2 = new FooterReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.FooterParts.FirstOrDefault()) };
PageSize pageSize1 = new PageSize() { Width = (UInt32Value)12240U, Height = (UInt32Value)15840U };
PageMargin pageMargin1 = new PageMargin() { Top = 1440, Right = (UInt32Value)1440U, Bottom = 1440, Left = (UInt32Value)1440U, Header = (UInt32Value)720U, Footer = (UInt32Value)720U, Gutter = (UInt32Value)0U };
Columns columns1 = new Columns() { Space = "720" };
DocGrid docGrid1 = new DocGrid() { LinePitch = 360 };
sectionProperties1.Append(headerReference2);
sectionProperties1.Append(footerReference2);
sectionProperties1.Append(pageSize1);
sectionProperties1.Append(pageMargin1);
sectionProperties1.Append(columns1);
sectionProperties1.Append(docGrid1);
paragraphProperties1.Append(sectionProperties1);
oxl.InsertAt<ParagraphProperties>(paragraphProperties1, 0);
body.InsertBefore<Paragraph>(GenerateParagraph(txt, oxl.GetAttribute("rsidRDefault", oxl.NamespaceUri).Value), body.GetFirstChild<SectionProperties>());
part.Document.Save();
wordprocessingDocument.Close();
//Generate new Paragraph
public static Paragraph GenerateParagraph(string text, string rsidR)
Paragraph paragraph1 = new Paragraph() { RsidParagraphAddition = rsidR };
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
Tabs tabs1 = new Tabs();
TabStop tabStop1 = new TabStop() { Val = TabStopValues.Left, Position = 5583 };
tabs1.Append(tabStop1);
paragraphProperties1.Append(tabs1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = text;
run1.Append(text1);
Run run2 = new Run();
TabChar tabChar1 = new TabChar();
run2.Append(tabChar1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
paragraph1.Append(run2);
return paragraph1;
static void GenerateHeaderPartContent(HeaderPart hpart)
Header header1 = new Header();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Header" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
header1.Append(paragraph1);
hpart.Header = header1;
static void GenerateFooterPartContent(FooterPart fpart)
Footer footer1 = new Footer();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Footer" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
footer1.Append(paragraph1);
fpart.Footer = footer1;
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I accidentally pushed the cloud button next to a song that I didn't want and now I can't delete it... How do I delete it?

I accidentally pushed the cloud button next to a song that I didn't want and now I can't delete it... How do I delete it?

Hello Placencio,
The song can be deleted by swiping the song, then tapping 'Delete.'
iPad User Guide For iOS 7 Software
http://manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
Cheers,
Allen

Go to the op of next article

Similar Messages

Maybe you are looking for