Goa for product category
Hi experts
I am creating a GOA with 2 items, one for product category and one for normal item, but an error occur 'No condition price exist for item 1', someone knows if it's normal?
As a know there is no conditions for product categories.
Thanks in advance
Nilson
Nilson,
I am assuming you are getting that error on Product Category line.
No, you need not provide any conditions for Product Category items.
Do you see any conditions populated for that item? Try deleting the item and adding back.
In IMG, do you have 'Activate Grouping logic for Locations in GOA?'
SG
Similar Messages
-
Search help for Product category in table level
Hi Gurus,
My requirement is to create a Z-table with fields Plant and Product category.
For this Product category I need to create a table level search help. So I need to know the SRM table used for Product category.
Could any suggest me any table name or search help or FM that will display the list Product Category .
Regards
PaulHi Paul,
Use the FM 'BBP_GET_ALL_CATEGORIES_F4' for getting all the list of Product Category .
Thanks
Bidyut -
Define G/L Account for Product Category and Account Assignment Category
Hello Experts,
I got a requirment to make a new entry in below SPRO path.
Define G/L Account for Product Category and Account Assignment Category
*Individual entries cannot be put into the change request*
*Message no. SV141*
*Diagnosis*
*For technical reasons, the entries cannot be fully specified in the change request. There are two possible reasons for this:*
*1. The key of an entry is longer than 120 characters. All entries whose keys match up to character 119, are then copied into the change request, rather than an individual entry.*
*2. The key of an entry contains fields of special data types, for example, packed numbers. The key can only be specified in the change request up to the first such field from the left.*
*all entries whose keys match up to character 26 are copied into the change request, rather than a single entry.*
*System Response*
*The selected entry is copied into the change request correctly, but other entries may be copied as well.*
My question is, If I make one entry and move to Quality and production system will it move only one entry or whole table will move?
Kindly help me.
Thanking you
Regards
SharanI got the same message trying to make an entry in SPRO:
Define Backend System for Product Category
I found the note 305942 describing exactly the issue for my and above mentioned entry, which offers the correction, then the note 326802 which offers the correction of the first notes. However, both notes are for Releases 4.6C and D (from 2000), and we are using EHP2 FOR SAP SRM 7.0.
I see another discussions in SCN regarding this topic, but haven't found real solution yet. Any hints? At least the answer to previous question from Sharan would be appreciated.
Best regards,
Toni -
Defining G/L Account for product category and account assignment category
We are using the standard configuration to default in a G/L account for a given product category and account assignment category combination. This works well for us when it comes to the shopping transactions (i.e. BBPSC01, BBPSC02, etc.), however we have a problem with this logic in the carry out sourcing transction BBPSOCO01. Our users are creating describe requirements which are then delivered to BBPSOCO01, however the user is not assigning the correct product category, so the sourcing department updates the cart with the correct product category. Upon doing so, the G/L account gets changed to whatever the V_BBP_DET_ACCT table determines is correct for that given product category/account assignment combination. We would like to know if their is a way to not fire the "default G/L account determination" when the shopping cart is changed in transaction BBPSOCO01. I already know about the BBP_DETERMINE_ACCT BADI but thought there might be a less expensive alternative. Our business treats the G/L account provided by the configuration as a guideline, therefore when the buyer changes the product category they also want to retain the account assignment information. Any suggesstions on how this might be accomplished outside of creating my own logic in the BADI?
Best regards,
Shawn O'ConnorI got the same message trying to make an entry in SPRO:
Define Backend System for Product Category
I found the note 305942 describing exactly the issue for my and above mentioned entry, which offers the correction, then the note 326802 which offers the correction of the first notes. However, both notes are for Releases 4.6C and D (from 2000), and we are using EHP2 FOR SAP SRM 7.0.
I see another discussions in SCN regarding this topic, but haven't found real solution yet. Any hints? At least the answer to previous question from Sharan would be appreciated.
Best regards,
Toni -
Search help for product category
Hi experts,
Here we are using srm 7.0 ,our requirement is to modify the search help of product category in item details tab of shopping cart . can you please help me in finding the search help for product category .The search help should be modified to include source system in selection criteria.
Thanks in advance.
kamakshiHello,
Kindly check the webdnpro component /SAPSRM/WDC_SH_PRODCAT.
This compoent is called for F4 help of product category.
You can modify the search help by enchancing it.
If you want to change the logic then in method ONACTIONDO_START you can add post exit.
Regards,
Neelima -
Preferred Vendors for Product Category
Hi,
We are using SRM 7.0, Classic Scenario.
My client wants a list of preferred suppliers that need to be maintained for a product category. So that whenever the requester selects the product category, he should get the list of preferred vendors for that product category.
Thanks
RonHi,
How about maintaining "Supplier List" ?
http://help.sap.com/saphelp_srm70/helpdata/EN/46/48e3de2f155d5ee10000000a1553f7/frameset.htm
Search help with "Supplier List" is available in Preferred Supplier selection.
Regards,
Masa -
Multiple GL for product category in SRM 7.0
Hi! I know with SRM 7.0, we can assign multiple GLs. However, on testing it out on a Shop transaction, I still don't see the list of GLs appearing for selection. Also, I can still assign any other GL and the system will allow the shopping cart to be saved. Does anyone know what is the system behaviour regarding this multiple GL assignment in the config?
Cheers!
SFHello all,
This is to correct my posting on Nov 16, 2009 8:20 AM. I have done further research and testing and finally got the multiple GL working. I have to remove the authorisation for object BBP_FUNCT on activity BE_FE_HELP to disable the serach help function. This way, the user will see the allowed list of GLs instead of a search help.
Regards
SF -
Value help for product category.
Hi ,
I need to restrict the values ,i mean should populate the cat id should come from custom table.
How can i create custom serach help
I have generated get v
data : lv_str_index TYPE string.
DATA:
LS_MAP TYPE IF_BSP_WD_VALUEHELP_F4DESCR=>GTYPE_PARAM_MAPPING,
LT_INMAP TYPE IF_BSP_WD_VALUEHELP_F4DESCR=>GTYPE_PARAM_MAPPING_TAB,
LT_OUTMAP TYPE IF_BSP_WD_VALUEHELP_F4DESCR=>GTYPE_PARAM_MAPPING_TAB.
lv_str_index = iv_index.
CONCATENATE 'table[' lv_str_index '].STRUCT.GET_PRODHIERARCHY ' INTO ls_map-context_attr.
ls_map-f4_attr = 'PRODHIERARCHY'.
APPEND ls_map TO: lt_outmap,lt_inmap.
lv_str_index = iv_index.
CREATE OBJECT RV_VALUEHELP_DESCRIPTOR
TYPE
CL_BSP_WD_VALUEHELP_F4DESCR
EXPORTING
IV_HELP_ID = 'ZKARFTCAT' --->search help having cat id and desc
IV_HELP_ID_KIND =
IF_BSP_WD_VALUEHELP_F4DESCR=>HELP_ID_KIND_NAME
IV_INPUT_MAPPING = LT_INMAP
IV_OUTPUT_MAPPING = LT_OUTMAP.
when i select the values i should fill the cat id and cat des respectively.CACS_SHLP_EXIT check this standard Search help in ECC
search help exit name : CACS_SHLP_EXIT its a functional module
RSBGUI_CONVEXIT check this standard Search help in CRM
search help exit name : RSB_GUI_SHLP_EXIT_CONVEXIT
in this search help when you click on the search help exit name it takes you to the function module .
you need to write code there as shown in the standard .
step 1 .
now you need to create a zsearch help and create a search help exit put your code in side that and bring what ever value you want . and use that seach help in the WEB UI .
step2.
in Method GET_V_
DATA:
ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
ls_map-context_attr = 'TYPEID'. give the Context _ATTribute name .
ls_map-f4_attr = 'OBJTYPE'. gve the f4 attribute attribute name .
APPEND ls_map TO: lt_inmap,
lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor
TYPE
cl_bsp_wd_valuehelp_f4descr
EXPORTING
iv_help_id = 'Z_search name ' " Know use the search help name
iv_help_id_kind = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
iv_input_mapping = lt_inmap
iv_output_mapping = lt_outmap.
Edited by: Anbu B on Aug 11, 2011 12:53 PM -
FM for Products releated to a Category
Hi All,
Can anyone of you tell me the Function Module to retrieve the list of Products if a Product Category is specified, like in that what we search in COMMPR01 transaction.
Regards,
JagguHi Jagadish
Here is the FM for Product category assignment:
COM_PRODCAT_SETTYPE_BY_CAT
You will have to pass Category ID and guid which you can get from following table .
This table also has the Product category assignment:
COMM_PRPRDCATR
I hope it helps
Regards
Rupesh -
Hi
We are upgrading from SRM 4.0 to SRM 7.0 system. we are facing some issues in Shopping cart
1. Product category is getting defaulted in SC for all the line items. we have not maintained default in extended attributes and in default settings in SC also we tried to remove Product category but it is mandatory field and system is not allowing us to give blank and when i have given product category at SC Default settings it populates to all line items. Our requirement is product category should be blank at SC level and user will select. How to find the solution for this
2. G/L Account is not populated based on the product category ( we have maintained at config level for product category and G/L Account but it is not populating when SC is created with that product category
Appreciate your help
Regards
Sandeephi
last product category or first product category is showing as default for all your sc. before you order you can change it right .
or create a dummy product category and make it default.
Product category discription in the shoping card
br
muthu -
Product category favorites list
SRM SERVER 550 Level 14.
Hello all,
The users want their product favorites list to have the last 15 categories.
I found out that by manually adding entries to BBP_CATEGORY_FAV I can increase the number of entries shown in the drop down list for product categories.
There's also an option for product category for the users in their own settings.
My question is is there an option for mass changing this for approximately 300 user?
Kind regards, Rob DielemansHi Rob,
There are few ways to achieve this.
all data element like Unit of measure,product category ,currency are populated using favourite function module.
There are two BADI,Read documentation of these two BADI's
BBP_F4_READ_ON_EXIT
BBP_F4_READ_ON_ENTRY
In these BADI,you have a table ET_CATEGORY_FAVOURITES
Populate these tables with favorite list and pass EV_X_FAV_PROCESSED as X.
You will get your favourite list in F4 Help.
This is applicable to all data elements.
To maintain this kind of list you have to pupulate the User favourite list in some table and based on that you have to plan pupulation on internal table.
Another simple way to do that ,which I have not tested and it require SAP core code modification.
You can see in SE38 transaction In include ,LBBP_HELP_ATTRTOP,there is a data declaration and based on this all data element like...product,UOM,Currency etc creats 5 favorite list...
So increase this number to 15 this will solve issue...
This may require access key generation and further maintaience issues while upgrade..
number of favourites per data element
CONSTANTS: GC_MAX_FAVOURITES TYPE I VALUE 5.
Regards,Nishant -
Product category in srm should over write the punch-out catalog category
Hello Gurus,
I have a requirement to overwrite the product category which is coming from the punch-out catalog with the SRM product category.
Exactly saying i am looking for a mapping program.
Because the product category schema in Punch-out Catalog is different from the product category schema in SRM.
Is there any BADI that is available to help and Can anybody has the experience in doing so....??
with regards,
maheshHi Pierre,
Actucally i am using NIGP as the Schema, Can you explain me how we can do with more details how to configure the settings to map the exteranal product category with the internal product category and with out going to BADI.
IMG> SRM> SRM Server --> Master Data --> Content management --> Mapping for schema.
You set your schema for product category (UNSPSC, ..) and then define the mapping for a schema .
Thanks for your response,
Mahesh -
ShoppingCart: product category
Hi to all,
i have to make two questions about Shopping Carts.
I'm working with Extended Classic Scenario, SRM 5.0, SP9 release.
1)I've created a SH with 5 positions, all coming from same catalog, same product category. In customizing, product category is setted "sourcing never carry out". So after approval step, SH and positions are automatically transformed not into a PO(as i was expected) but into 3 POs (i can't understand why!!!). Does anyone know the reasons?
2)I have to recover many SH positions approved but not transformed in a PO causing a IPsec's crash. How can i force them in order to create missing POs?
Thanks in advance,
ChristianHi,
If You don't assign vendor to SC, 3 PO (one PO on one item in SC) will be created.
Please check in SPRO -> SRM -> SRM Server -> Cross-Application Settings -> Define objects in Backend System
Find Your Purchasing group and category ID. Check value entered in Ext. proc. Value should be 'Purchase order if item data complete'.
You also check in SPRO -> SRM -> SRM Server -> Technical Basic Settings -> Define Backend System for Product Category if You have a category ID and corresponding systems (source and target) attached to it.
Regards,
Marcin Gajewski -
User and product category responsible
Is there any way to findout which product category he is responsible. Any Function module?
Input - Product category
Out put- List of Users(ie responsible for product category).
BR
RamanHi,
You will not get the user list from the FM's i mentioned.
You will get the Org ID or the position ID under which the product catgeories have been maintained in the org structure from the tables HRT1222 and HRP1222.
Then using the Org ID/position ID,you can get the users who are assigned under those using the FM's mentioned i.e. BBP_OM_STRUC_GET_USER_FROM_POS/BBP_OM_STRUC_GET_USER_FROM_ORG.
So first query the tables mentioned to get the pos ID/org ID and then pass the OrgID/Pos ID to the FM's to get the user list.
I hope its clear now.
BR,
Disha.
Do reward points and close the thread if your query is answered.
Do reward points for useful answers. -
Product category from CRM_ORDER_READ
Hi,
can anyone tell me how to find out the values for "product category" from FM "CRM_ORDER_READ"?
-GaneshHey Ganesh,
This fm is used to read the order's and lt_products will return produst used in the order.
If you want to get the product category use the FM:CRM_WAP_PRODUCT_GET_CATEGORY
Hope this will help.
Regards,
Arjun
Please do reward points
Maybe you are looking for
-
How to restore an X61s (MBR?) to access ThinkVanta​ge Factory Reset
Hello Community, I read several posts regarding different kind of boot problem scenarios, but nothing fit so far.. I can successful boot into the Windows XP Professional partition; but somehow I messed up all my network drivers during a bluetooth sof
-
Forms Flicker Forms 9.0.2.11.0 Our application currently runs forms 6i using Jinitiator. We are in the process of upgrading our environment to 9i, database and forms. Because of the problems with downloading jinitiator to our user base we are looking
-
Problem in jdk1.6 installation on win NT service pack 6
Hi All, I am trying to install jdk1.6 on windows NT service pack 6. First it ask for windows installer 2.0 or later then i install intaller 2.0. Now when i try to install jdk1.6 it ask for some dll(dll name does not specified). Can anybody tell me wh
-
Unable to install VCTRL_PCAPP_LA_2_01_04.exe
Hi, I just completed downloading VCTRL_PCAPP_LA_2_0_04.exe and after executing the file, I get the error "The program is unable to install your files, probably because of a security setting on your computer. Temporarily disable your Windows or Virus
-
Get result from google by java
after greeting i want to know how to make search and get result from google through jsp and display it in jsp if anyone has answer please send me it as soon as possible thanks