GOA with services
Hi gurus,
How to create a Global Outline Agreemnet with many services associated to a position, so that when transferred to ECC the contract generate one line at EKPO level and several lines for services (table ESLL) ?
We are facing the issue that every service inserted in the GOA lines generates a line in the EKPO table.
Many thanks,
Ezequiel
Hi,
Yes, SRM system behaviour is consistent with ERP,please note that it's service procurement different with material procurement, unlike material procurement we can't enter services directly.
It's standard behaviour,which means, In case of service procurement,single line item with service category should be associated with Services lines(Hiererchies),which are further reflected in ESSL.
Many Thanks,
Venkat
Similar Messages
-
Report issue on Virtual cube with services
Hi,
I'm following a how-to document to report on a virtual cube using a custom function module and everything seems to be OK except it is dumping at the following line which is included in the How To document "How Tou2026Implement a virtual InfoProvider with Services".
Both <l_s_data> and E_T_DATA are of same data types as discussed in the how-to document.
append <l_s_data> to E_T_DATA
These are the declarations which are same as HowTo document
E_T_DATA TYPE STANDARD TABLE
FIELD-SYMBOLS: <l_s_data> TYPE ANY.
Did any one face this issue. Greatly appreciate any insight into this issue. We are on BW 3.0B.
the dump i'm getting is ...
Data objects in a Unicode program are not convertible.
Error analysis
The statement "MOVE src TO dst" requires the operands "dst" and "src" to be comvertible.
Since this statement occurs in a Unicode program, the special convertibility rules for Unicode programs apply.
Thanks,
Hari Immadi
http://immadi.com
SEM BW AnalystHi,
In the debugging this is what I found out.. Any further insight?
Virtual cube has only 1 characteristic Z_CRNUM & only 1 keyfigure Z_SR
Report has only Z_CRNUM & Z_SR
<L_S_DATA> has following record & value
component type length contents
K____504 P 9 1.000
S____504 C 18 16EA4D-R
K____504 is the technical name of Z_SR in virtual provider.
S____504 is the technical name of Z_CRNUM in virtual provider.
E_T_DATA (type standard table) has following structure with a total of 5 fields.
S____504 K____504 &KEYEND 1ROWCOUNT Z_SR
Regards
Hari Immadi
http://immadi.com
SEM BW Analyst -
ORADC problem on Windows 2000 with Service pack 1 and service pack 2
Hi,
I have a VB application running on NT4.0 workstations. It uses
ORADC control to talk to ORACLE 7.3 When I load it on Windows
2000 with service pack 1 or service pack 2, I encounter some
problems.
The ORADC control is used in most of the VB forms and the
Refresh method of the ORADC conrol is used to refresh the APEX
TRUE DBGRID PRO control. When this action is executed, I receive
a run time error
"Method Refresh of object '_DORADC' failed Err#: -2147417848
It works fine when no service pack is applied on Win2K.
Can anyone tell me what's going on?
Thankssatheesh_p wrote:
Thanks for your reply.
When I checked the system requirements. I couldn't find information on windows 2003 service pack 2
link http://www.adobe.com/products/coldfusion/systemreqs/.
Whether your OS is windows 2003 with service pack 2?
Are you sure coldfusion 8 will work on windows 2003 with service pack 2?
Regards,
Satheesh.
Well it was there, if you understand the naming properly:
ColdFusion 8 system requirements
Windows
Intel® Pentium® II or AMD Athlon processor
Microsoft®
Windows® 2000 Professional with Service Pack 3; Windows 2000 Server,
Advanced Server, or Datacenter Server with Service Pack 3; Windows
Server® 2003 Web, Standard, or Enterprise Edition with Service Pack 1
and R2; Windows Server® 2008; Windows XP Professional or Home Edition;
or Windows Vista®
R2 is the "offical" Microsoft name for service pack 2. -
Firefox connects to google-analytics for some sites,when i click on links in websites or emails and then gets stuck, and I can never get onto the site. Or opens a new bower behind the one i'm usind that's blank i don't even know it's there untill i close the one i'm using. How do I prevent Firefox from connecting to google-analytics? Or opening a blank bowser behind the one i'm using. I use XP with service pak 3 in English
== This happened ==
A few times a week
== a couple months agoI got the same issue.
I go on a website and all the sudden another window pops up with "results.google-analytics.com" or "search.google-analytics.com". It has often ads for other sites for example. black single dating site
how can I can I stop that from happening again?
I didn't download or do anything, just visit websites, that I visit on a regular basis.
OS: Windows XP
Firefox Version: 3.6.6 -
Regarding Virtual InfoCube with Services
Hi All,
I have a general doubt regarding two Standard InfoCubes
We have two InfoCubes FIGL_C01, FIGL_C01, based on which we have two Virtual InfoCubes with services. FIGL_VC1, FIGL_VC2.
What is the necessity for maintaining these InfoProviders as we are already having the base InfoCubes on which we can derive the queries.
What is the basic use of Virutal InfoCube with Services.
Regards.Hi,
SAP help says:
<i>At query runtime, the service of the virtual InfoCubes uses the data from the basic InfoCubes to determine the balance-dependent location of the financial statement items (contra items), in the financial statement version and presents the result in the query. From the technical point of view, the service determines the item indicator in the key for the financial statement items depending on the balance in the respective node in the financial statement structure.</i>
To know further infomation about why we need to find the Item indicator in finance statement refer:
http://help.sap.com/saphelp_nw04/helpdata/en/04/7b95fb42b0f94aba334c0890dbbda4/frameset.htm
Note 673564 describes exactly why the virtual Infocubes 0FIGL_VC1 and 0FIGL_VC2 were developed. (because BW cannot handle the FI fin. statement hierarchies)
With rgds,
Anil Kumar Sharma .P -
Administrate virtual info cube with services
hi, all,
if you come across an existing virtual info cube with services, HOW can you find out the name of the function module, that provides the data?
best regards
nevenhi..
according to the below link..from help.sap.com...clicking on 'detail' pushbutton in cube--change screen..should give u the details(FM etc) u need..
http://help.sap.com/saphelp_nw04/helpdata/en/62/d2e26b696b11d5b2f50050da4c74dc/content.htm
Vishvesh -
Virtual infocube with services - division of suppliers in categories
Hello,
Ive a problem and the idea to solve it with a virtual infocube with services. But unfortunately I dont know if its really possible to solve it like this.
The scenario is:
Ive suppliers, turnovers, goods (which have been delivered) and different quality deficiencies. In dependence of the turnover with each supplier, they will be ranked. For the position in the ranking they get points. From this start points one have to subtract points for the different quality deficiencies. In dependence of this end-sum, the suppliers will be divided into categories. And this division should be shown in the query.
But the suppliers can vary in each run of the query in dependence of the selection in the query. And the turnover of each supplier which depends on the selected goods can vary, too. So the division into the different categories depends on the selection and is dynamic. One doesnt know this before. And so it isnt possible to save the category of each supplier in an infoprovider.
Now I want to know, if its possible to solve this with a virtual infocube with services.
I hope theres somebody who can help me. Thank you.
SusanneHello Susanne,
first of all, yes, it can be solved with VirtualProviders. But I wouldn't expect it to have a good performance. It depends on the number of data records we are talking about.
When you create a VirtualProvider you should make sure that the RFC Packing switch is flagged on. You can then get the selections in the tables-parameter selection with the structure bapi6200sl. Now you need to read the raw data for your selection. Either use the function module RSDRI_INFOPROV_READ or write the data into an ODS to simplify the selection.
Based on the raw data you need to do you calculation and write the data back to the table data.
For details of the implementation of the VirtualProvider and the function module you can check the SDN. These topics are also covered in my book ABAP Development in SAP BW - User Exits and BAdIs that was lately translated into English. You can find both the German and English version under <a href="http://www.sap-hefte.de/katalog/hefte/titel/gp/titelID-1256">www.sap-hefte.de</a> or <a href="http://www.sappress.com/product.cfm?account=&product=H1948">www.sappress.com</a>
Best regards -
Virtual InfoCube with Services - function module parameters documentation ?
Hello,
I have been trying to use a Virtual Infocube with Services.
I have seen most of the posts in SDN, and read the documentation in http://help.sap.com/saphelp_nw04/helpdata/en/8d/2b4e3cb7f4d83ee10000000a114084/frameset.htm
I did not manage to find a precise description of the import
parameters of the Variant 2.
In particular, what is the meaning of the
i_tx_rangetab TYPE rsdri_tx_rangetab parameter. I read in the code of RS_BCT_FIGL_DATA_GET that it has to do with query columns. In the tests I did this table is alway empty.
Also, i_th_sfc gives you the list of characteristics used in the query. But it does not inform you on wether these are in the 'rows' 'free characteristics' or 'filter'. Is there a way of knowing that?
Claudio CiardelliHi Claudio,
I never implemented Virtual InfoCube with services with a FM, but I know there is a couple of How To Documents about named:
- How to Reporting from External Data via Virtual InfoProvider
-How to Implement a Virtual InfoCube with Services
both with some code samples: did you read it?
Hope it helps
GFV -
Virtual infoprovider with services - Navigational attributes
Hi all,
I have a basic cube in BI system- X , and created a virtual cube in another BI system Y with services to read data from basic cube of BI system X . In BI system Y we built a report on virtual cube. This report (on virtual cube in BI system Y) is using a characteristics say Product group ( which is a navigational attributes of prodect in BI system X).
DataFlow is as under:
Basic cube in BI system X:
Product
Year
Amount
and Product group is switched on as navigational attributes in this basic cube.
Virtual cube in BI system Y:
Product group
Year
Amount
Report in BI system Y:
Product group in rows
Amount in column
This report is not working.
If I do the the following changes as follows then it works:
1.Use Product instead of product group in report
2. Switch off navigational attributes in basic cube.
We are in BW 3.5 and navigational attributes option is ticked on for virtual cube.
In summary, If I do not use navigational attributes in report and switch off navigational attributes from basic cube then report shows data.
Could you please help me to figure out the issue.
Thanks,
HarryThanks Naga,
Yes, I tried adding product in virtual cube as well but it did not work. Secondly, we do not want to add product in virtual cube because of data aggregation.
Most strange thing is that, once we switch on any navigational attributes on basic cube, function module stop working (paasing any data to virtual cube report). report says no appropriate data found. We are using sap standard function module "RSDRI_INFOPROV_READ_RFC". I debegged this code and no data in internal tables.
If we switch off all navigational attributes from basic/source cube this function module provide data to internal tables in code.
Why function module is behaving like that.
You guys experience/support/any clue will be appreciated highly.
Thanks,
Harry -
Virtual provider with services
Hi experts,
we have the same query on virtual cube(with services) and BW loacal cube.Both local cube and virtual cube contains the same data. But both are showing different query results.
that is virtual provider query is not displaying all the values in master data table.
for example we have 10 brands under one company code, the virtual cube query is only showing 5 among them. I would like to see all the values without any restrictions, so can you please guide me.
when i checked from tcode /listcube it is displaying all the values without any restriction.
Thanks for your time.Hi Anupama,
My question is if u have same data in the both cubes ( virtal&Basic) u can create querry on u r basic cube only. But this not answer.
R u using same conditions on both cubes. Means In querry designer.
When u r using the virtual cube(with services) it is generally create on function module, this module properly maintainning the complete master data or not? Check it.
Hope this will help
HARI GUPTA -
Query on Virtual Provider with Services
Hello everyone,
I created a VirtualProvider and used the HowTo "Implement a VirtualProvider with Services" (Scenario 3: Any Table). Everything works fine and I can see some data with listcube. But when I'm executing a query (Bex) on the VirtualProvider I always get "'No Applicable Data Found."
Any hints?
Thank you very much and regards
JohannesHi Johannes,
please run your query in rsrt in debug mode, set a break-point in your fm and check the contents of the tables related to the characteristics and keyfigures to be read as well as the selections and check if everything here works as expected.
kind regards
Siggi
PS: btw, are you using a hierarchy in your query? -
What is the use of Data packet dim with Virtual cube with services
Hi Friends,
Could anybody tell me what is the use of Packet dimension in Virtual cube with services , It cannot contain data persistently ,Just fetch at runtime,Then there is no Physical load happening,Then why it should be automatically created for this??
Message was edited by: Pradeep choudhariHi Maik,
Unit dimension will not be created automatically until and unless you have keyfigure referning units..
But my question is : Why should we have data pack dimension , which is useless in this case of Virtual cube with services.It should not be created automatically!! What do you say?? -
How to load data from a virtual cube with services
Hello all,
we have set up a virtual cube with service and create a BEx report to get the data from an external database. That works fine. The question is now:
Is it some how possible to "load" the data from this virtual cube with service (I know that there are not really data...) into an other InfoCube?
If that is possible, can you please give my some guidance how to set up this scenario.
Thanks in advance
JürgenHi:
I don't have system before me, so try this.
I know it works for Remote Cube.
Right Click on the Cube and Select Generate Export Data Source.
If you can do this successfully, then go to Source Systems tab and select the BW. Here, Right CLick on select Replicate DataSources.
Next, go to InfoSOurces, click on Refresh. Copy the name of Virtual Cube and add 8 as a prefix and search for the infosource.
If you can see it, that means, you can load data from this cube to anywhere you want, just like you do to ODS.
ELSE.
Try and see if you can create an InfoSpoke in Virtual Cube. Tran - RSBO.
Here, you can load to a database table and then, from this table, you can create datasource, etc.
ELSE.
Create query and save it as CSV file and load it anywhere you want. This is more difficult.
Good luck
Ram Chamarthy -
Error after transport of Virtual Cube with Services
Hi All,
would any body can suggest me how we can change the source system assignment in QA or Production client for virtual Cube with Services.
A virtual cube is created with Services using the settings for RFC and using the logical source system. however after transporting the same to the QA system the Logical Source System has not changed and thus it is giving error " Error occured while determining target system for the logical system" would any body can suggest me how i can change the logical source system assignment in QA system for Virtual Cube with services.
Points would be rewarded appropriately.
Cheers
NoorHi Noor,
Check this link, it may help you.
Re: Transport issue - Source system does not exist
Regards,
Vijay G. -
Query ID in Virtual Cube with services-Function module
Hi,
I am using virtual cube with services linked to a function module.
The function module has fixed parameters(such as infoprovider name). None of these parameters consists of query information such as query ID OR queryname .
Do any one know how to determine query which was executed this function module?
Best Regards,
AnilHi Claudio,
I never implemented Virtual InfoCube with services with a FM, but I know there is a couple of How To Documents about named:
- How to Reporting from External Data via Virtual InfoProvider
-How to Implement a Virtual InfoCube with Services
both with some code samples: did you read it?
Hope it helps
GFV
Maybe you are looking for
-
Itunes 7.1 ipod playlists - problems synching or manually adding
I was hoping 7.1 would solve these two issues, but it hasn't. Does anyone have advice for either of these problems: 1. when the ipod is plugged into the computer, Itunes caps the number of playlists that show up in the 'synch only checked items' play
-
How to add order reason code field to selection screen of VL10
Hi, How to add Order reason code(vbak-augru) to the selection screen of VL10. 1. How to find enhancement for it? 2.I want to display Order reason code field on output list also? 3.Pls give steps i am new to enhancements thanking u advance..
-
WRT54G- Set up Wizard Password Issue
I just got my linksys and am using the setup wizard. On #8 it keeps prompting me for a password. I use the default "admin", the system runs the checking computer function, I get to @ 98% and then just keeps asking me for a password over and over.
-
How can I get calendar appointments sent in Outlook to open properly in Calendar?
When someone sends me an appointment from their PC (Outlook) and I open in Calendar, it brings up an old appointment and I am unable to see the one that was sent to me. Any ideas?
-
Using TIC ASIC Features in the NI GPIB/VXI
Hi, I am trying to utilize a feature detailed in the NI tutorial Triggering With NI-VXI of the TIC ASIC within the NI GPIB/VXI controller in my application. I am trying to generate a simple SYNC trigger (low going pulse) on VXI TTL0, map that trigger