GOAs in MDM catalog

Hi experts
I have an business requirement to send GOA to MDM catalog, but I don't know if it is possible, I am using SRM 5.0 classic scenario.
Someone could help me.
Thanks
Nilson

Solved

Similar Messages

SRM MDM Catalog - Transfer Contracts from SRM - XI - MDM

Hi,
We are implementing SRM MDM Catalog1.0 with SRM 5.0 & ECC 6.0.
We have already configured XI content for MDM Catalog.
We have also done the basic settings for transferring contracts from srm to XI (including Backend System & Check box in Contracts for transfer to catalog).
But when i run the report SRMMDM_CTR_TRANSFER, the log tells me that contracts transfer has been initialized, but I cant see any XML message in SXMB_MONI
Can someone pls help and tell me why is that happening??
Thanks in advance.
Regards,
Jasmeet

Hi Mausam,
yes we have a SRM system from which we want are going to be sending Contracts, Prod Id's, Product Categories, Suppliers List etc from SRM to MDM using XI.
We have the Pre delivered content for XI from which we have set up the Interfaces etc.
This mapping between SRM-XI-MDM works pretty fine if i try to send Products or suppliers from SRM. I can see the IDOCs being generated. But when i run the report for Contracts, I cant see any IDOC in SXMB_MONI in SRM which is my source system.
So hence my question..... Is there some other way by which Contracts are transferred and if so then how and where can I see it.
Regards,
Jasmeet

ECC TO SRM-MDM CATALOG THROUGH SAP PI

We have a scenario where we are sending data from ECC to SRM-MDM Catalog through SAP PI and data is coming from ECC through proxy and sending to SRM u2013MDM catlog through file adapter. In ESR part we have used SAP defined standard service interfaces (CatalogueUpdateNotification as sender interface and MDMInfoRecordDataTransmission as a receiver interface). The mapping used is also standard one.
Now we have got requirement to send the data for vendor mat no, manufacturer field of info records from ECC to SRM-MDM catlog. But we are unable to find out these two fields in standard interfaces/messages. Can anybody guide us how to add these fields in the current data types or is there any other standard interfaces we can use.
Thanks in advance.

Hi Shiv,
Many thanks for your reply.
Since we're not using XI / PI scenario and this is an upgrade from SRM 5.5 to SRM 7, Iu2019m using the same approach that was already used in SRM 5.5 with CCM 2.0.
The idea is that the catalogue and all the records maintained need to be associated to a contract. So, I add the contract ID and the correspondent contract item in the import file, in addition to the supplier name, product ID, price information and so on. I mapped the contract ID with the field contract price.
In relation to the price information fields, as I want it to be visible for any user that accesses the product catalogue, I tried different approaches:
1.Using OCI Price information u2013 amount, currency, price base quantity and price base quantity UoM;
2.Using OCI Price contract u2013 amount, currency, price base quantity and price base quantity UoM;
The first approach didnu2019t work very well, as I was not able to see price information when accessing the catalogue. I could only see it once I transfer the items to the SC. In addition, this approach had one problem. The products were displayed but it was not possible to select the items one by one. To do that I needed to select all the items of the catalogue and after that the detail of the contract ID was displayed in every item, allowing me to choose the items that I want to select to my SC.
The second approach was better as the information was visible when accessing the SC and I was able to select all the items, one by one, as it should be. The main problem of this approach was that Iu2019m getting errors in the SC when the materials have stock u2013 u201CInterface data contains errorsu201D. Or alternatively, if the items didnu2019t have stock, the SC was possible, but when I tried to create a PO from that SC, It simply does not work.
So, can someone help me? Any ideas?
Thanks in advance.
Best regards,
Andreia

SRM-MDM catalog 3.0 - Installation Process

Hi All,
I'm in the process of installing SRM-MDM catalog 3.0 but I'm not sure about the correct installation process.
The SRM-MDM catalog 3.0 installation guide indicates that the following instances are mandatory for SRM-MDM Catalog system:
1- Java system with the central instance, the central services instance, the database instance
2- MDM Server, and MDM Import Server
We have covered the first point by installing an SRM 7.0 JAVA system. Regarding the second requirement, I have some doubts in the way it should be completed. What we did so far was to install the SRM-MDM catalog 3.0 from the MDM 7.1 installation master. So, we now have two MDM server instances: MDS and MDIS.
I'm stuck now. I'm not sure on how to connect my SR-MDM system to the JAVA DB (created in step 1) to create a new MDM schema within it. This makes me wonder if I've followed the correct process. Could you please clarify and explain which steps should be performed to get my SRM-MDM system up and running? Actually my main concern is..Should I first install a MDM system as it's described in MDM IG, and after that perform the installation of the SRM-MDM catalog as I've already done in step 2?
Hope being clear enough I'll wait for your suggestions.
Thanks and regards

Hi Diego.
The Installation Note Number for SRM-MDM Catalog 3.0 is : 1177779. The recommended steps would be to follow how the Installation Guide recommends you to do so.
But still your assumption is correct. MDM landscapes and Java landscapes are both different set of categories to be installed to make the Catalog scenario to be successfull.
Step 1: Make sure you have the back end database server(SQL/Oracle/???) is installed.
Step 2: Make sure all the MDM components(MDS, MDIS, etc) is installed.
Step 3: Make sure Java WebAS is installed correctly.
Step 4: Now deploy the Catalog SCA and MDM Connector deployed in the Java WebAS.
Step 5: You can unarchive and load the repository.
Step 6: Try to launch the catalog using the URL provided to check and make sure if the connection is fine.
Also what Masa has mentioned is the communication path how the whole process is achieved technically and that doesn't mean that it has to be in the same order which he has mentioned. The below sequence is just an path to describe how the communication is achieved technically.
User -> Browser(Search UI deployed on AS Java) -> (Java API on AS Java) -> MDM Server -> MDM Repository -> DB
Relating Masa's path with the above steps
User ->
Browser(Search UI deployed on AS Java) -> Step 3 and 4
(Java API on AS Java) -> Step 3 and 4
MDM Server -> Step 2
MDM Repository -> Step5
DB-> Step 1
Hope this helps.
Regards
Bala
Edited by: chandar_sap on Aug 30, 2010 6:16 PM

SRM-MDM Catalog Installation/Landscape

Hi,
We are currently having the following landscape in place with regards to the SRM, MDM and SRM-MDM Catalog :
Server 1 : SRM 5.0 Running   (HP-UX)
Server 2:   Enterprise Portal running with MDM Content and SRM-MDM Catalog JAVA components (HP-UX)
Server 3:   Standard MDM Server installation (Windows 2K)
We have configured everything according to the notes and guides (including the guide from Sudhendu Pandey), but when we try to configure the Search UI in Webdynrpo, the java components cannot connect to the MDM host and we are getting just the connection failed error.
My questions are :
1)   Can we run with the above landscape or is it necessary to have the SRM-MDM Catalog Java components installed on the same server as MDM.
2)   Do we have problems with versioning of the MDM server and the SRM-MDM java components ? We already replaced the MDM_JAVA_API with the correct one, but I do not have a newer version of the other api.
3)   Do I need to configure anything on the MDM server to get this running ?
Thanks in advance for your help
Regards
Raymond

Hi Foh,
Apologies for my late reply, but I was travelling. Thanks for this tip. We were using the latest versions for the MDM Portal Content, but the API for the SRM-MDM catalog was different.
I have updated this API with the latest version (Patch 3 HF 1) and now I can logon to the MDM server and I see the MDM Repositories. However if I now try to logon to one of the repositories he gives me the same error that the Login has Failed. The user that I am using is the default one coming with the SRM-MDM repository (Admin).
Regards
Raymond

Installation & configuration SRM MDM Catalog 3.0

Hello Everybody
I have SRM 7.0 ABAP & SRM 7.0 Java installed with different SID's.
Can anybody please tell me step by step installation & configuration SRM MDM Catalog 3.0 ?
I have referred note 1177779 & 1177780 .
Thanks,
PR

You can get it here:
https://sapmats-de.sap-ag.de/download/download.cgi?id=TX7G1TDRAETSXTLIICWNYGBHG9751YVJKY3NPP9WL9PEEZIXG5
The password for the file is:
TryMe1st

Installation of SRM MDM Catalog

Hi SAP Mentors,
We are installing SRM MDM Catalog. I needed some clarification regarding the same. The version for SRM MDM Catalog is 7.02. Do I need a SRM 7.02 server with MDM 7.1 installed on it , on which I will be putting SRM MDM Catalog?
Please let me know as we need to start installation Monday. The docs are not very clear.
Thanks,
Asad

Zafar,
Yes. You need to have same release including the patch level. We experienced similar scenario and resolved all issues only after syncing the release and SP level.
hope it helps.
Regards,
Srinivas K.

Is use of flat file in SRM-MDM catalog search UI possible ?

Hello,
When user looks for materials inside SRM-MDM catalog (using search user interface), search is done manually with free form or drill down search.
Then, among the search result, user has to select items he wants to add to his shopping cart and finally transfer those items from his shopping cart overview inside SRM.
Is it possible to automate this user selection using for exemple a flat file uploading (or any other way you could know) ?
This flat file will have material number (or service), supplier code and quantity (no more information).
The aim of the request is to help requester to not have to select each item one by one (in the search result) knowing that :
- SC will have more than a hundred items,
- delivery time and price (for example) must be checked in MDM, being the master data reference
- materials (or service) to order are received by requester via a flat file without any information about prices, so i cannot upload my flat file directly into SRM because file missing data must come from MDM.
With this process, user should have only to transfer items automatically selected.
Could you please share your advises ?
We use SAP MDM 5.5.
Regards.
Laurent.

Hello Masa,
Masayuki Sekihara wrote:
A vendor look at buyer stock information like VMI and fill stock weekly base. So the vendor sends material number and quantity information as flat file to buyer. Buyer should create SC from flat file and price information should fetch from catalog.
Yes, your are correct: example you gave corresponds to process for my SC uploading.
Regards.
Laurent.

Error replicating customizing data to the repository (SRM MDM Catalog)

Hi Folks,
I am currently configuring SRM MDM catalog, and one of the initial steps is to replicate data from SRM to the repository.
After defining repositories and FTP servers, I am running step "start extraction".
Well, the result page prompts me for errors in the 3 different files it is trying to replicate:
Report Statistics
Size of document     33.979 Bytes
Number of records :
Currencies        195
cd /
250 CWD command successful.
cd "/SRM_MDM_Catalog/Inbound/SSD_120/LT_Currencies/Ready/"
250 CWD command successful.
Error while executing ftp command put Currencies_554_SSD120.xml
The otehr 2 errors are the of the same type, just of different XML file.
When I look at the log files in the port structure directory, I find the following messages:
<?xml version="1.0" encoding="utf-8"?>
<?xml-stylesheet type="text/xsl" href="MDM_Log.xsl"?>
<MDM_Log version="1.0" path="F:\usr\sap\SCD\MDIS06\exe\MDIS_Temp\MDIS_TASK1_20091223211459.xml"
>
     <Open ts-long="21:14:59 GMT, Wednesday, December 23, 2009" ts="2009/12/23 21:14:59.998 GMT" pid="3304" host="z001idsd118" compile-type="WIN64_RELEASE">
          <Version ts="2009/12/23 21:14:59.998 GMT" tid="9044" entry-no="0"><Server>7.1.01.78</Server><Build>Built on 2009-May-09</Build></Version>
          <Trace ts="2009/12/23 21:15:00.108 GMT" tid="9044" entry-no="1">[MDS=z001idsd118 Repository=SRM_MDM_Catalog ClientSystem=SRM Port=LT_Currencies]:   Chunk size/parallel[50000/5]: Import Task Started.</Trace>
          <Trace ts="2009/12/23 21:15:02.092 GMT" tid="9044" entry-no="2">Repository Load [SRM_MDM_Catalog]: 2003.483844 milli-seconds.</Trace>
          <Trace ts="2009/12/23 21:15:02.092 GMT" tid="9044" entry-no="3">Source file(s) retrieval + Repository Load: 2159.024536 milli-seconds.<LF/>-- Currencies_554_SSD120.xml</Trace>
          <Trace ts="2009/12/23 21:15:03.999 GMT" tid="3852" entry-no="4">xStructuralTransformer: Thread started.</Trace>
          <Trace ts="2009/12/23 21:15:03.999 GMT" tid="8392" entry-no="5">xValueTransformer: Thread started.</Trace>
          <Trace ts="2009/12/23 21:15:03.999 GMT" tid="9048" entry-no="6">xImporter: Thread started.</Trace>
          <Trace ts="2009/12/23 21:15:05.092 GMT" tid="6288" entry-no="7">xXmlSaxParser: Thread started.</Trace>
          <Error ts="2009/12/23 21:15:05.202 GMT" tid="6288" entry-no="8">Fatal Error at file Currencies_554_SSD120.xml, line 1, char 1, Message: Invalid document structure RC: 0xfffffffa - Invalid external data</Error>
          <Trace ts="2009/12/23 21:15:05.217 GMT" tid="6288" entry-no="9">xXmlSaxParser: Thread finished; Start -> End: 0.000000000 milli-seconds.</Trace>
          <Trace ts="2009/12/23 21:15:05.295 GMT" tid="8392" entry-no="10">xValueTransformer: : Start -> End: 0.000000000 milli-seconds.</Trace>
          <Trace ts="2009/12/23 21:15:05.295 GMT" tid="8392" entry-no="11">xValueTransformer: Thread signalled to stop: RC = 0xffffff</Trace>
          <Trace ts="2009/12/23 21:15:05.295 GMT" tid="9048" entry-no="12">xImporter: : Start -> End: 0.000000000 milli-seconds.</Trace>
          <Trace ts="2009/12/23 21:15:05.295 GMT" tid="9048" entry-no="13">xImporter: Thread signalled to stop: RC = 0xffffff</Trace>
          <Trace ts="2009/12/23 21:15:05.295 GMT" tid="3852" entry-no="14">xStructuralTransformer: : Start -> End: 0.000000000 milli-seconds.</Trace>
          <Trace ts="2009/12/23 21:15:05.295 GMT" tid="3852" entry-no="15">xStructuralTransformer: Thread signalled to stop: RC = 0x0</Trace>
          <Trace ts="2009/12/23 21:15:06.108 GMT" tid="9044" entry-no="16">[MDS=z001idsd118 Repository=SRM_MDM_Catalog ClientSystem=SRM Port=LT_Currencies]:   Chunk size/parallel[50000/5]: Import Task Finished.</Trace>
     </Open>
</MDM_Log>
What am I missing?
thanks a lot a happy holidays!

Hello Priti,
For accessing the catalog, you have to define the external webservice with the config parameters in SRM System under transaction "SPRO"
Please refer the SRM-MDM Catalog configuration guide.
Hope this will help you.
TNR,
Saurabh...

Error while copying MDM catalog to shopping cart

Hi all,
While pulling the MDM catalog to shopping cart, i am getting a error "No logical system for FI is maintained".
i have maintained the org structure..in the attribute i have given the logicla system..but somehow i am getting the error.
Please let me know if you have any solution

hi,
Check with your basis team.
"No logical system for FI is maintained".
1)Check in the PPOSA_BBP --Attritubute for the FI and maintain the Logical Backend system
2)for Backend system -SAP R/3 (or) ECC 6.0 you have not maintained the Logical system.
3) check the product category for which GL account is maintained in the Config
Regards
G.Ganesh Kumar

Pictures not appearing in after upgrade to SRM-MDM Catalog 3.0 SP7 Patch4

Hello,
Due to some issues in Advanced search we performed the service pack upgrade from SRM-MDM Catalog 3.0 SP5 (with MDM 7.1.03.72) to SRM-MDM Catalog 3.0 SP7 Patch4 ( MDM 7.1.04.146). With this new SP, the Pictures are not appearing anymore under the Hyperlink section anwhere in Catalog browser( Compare, Context view, Item details). With earlier SP pictures were appearing perfectly.
We have done like this:( refer earlier thread - Re: SRM MDM Catalog 3.0 Image display) thanks Sudhanshu, Jitesh and Mandeep for suggesting that solution!
Using the hyperlink field
type : rendered
MIME type : image type i.e. .jpg
URL : web URL
We had gone for this option because we dont want to store impages in MDM, and this worked perfoectly until new SP upgrade.
Any clues?
Thanks
Pravin

Hi Bala,
Nothing appears under the Hyperlink section in Catalog browser, though a valid link exists in Data Manager under Hyperlink as type-Rendered, MIME type as JPG and a valid URL.
I have searched Service Market place for this fix of this issue and found that SAP has improved the technology ( from Object Cache to Blob Cache) to display pictures/hyperlinks from SRM-MDM Catalog 3.0 SP06 and MDM 7.1SP04 onwards. We were on SRM-MDM Catalog 3.0 SP05 and MDM 7.1 SP03 before Dev upgrade.
Here are the notes for reference of others who get into same issue.
Note 1450593 - Implementation of BlobCache
This note states "MDM7.1 SP04 offers new image caching functionality called Blob Cache. The old functionality of Object Cache is replaced with the Blocb Cache mechanism in Catalog 3.0 SP06 P1"
Note 1505796 - Images not showing in SRM-MDM catalog (error in BlobCache)
This note talks about the issue in MDM API with Blob Cache. The Fix has been provided in SRM-MDM Catalog SP08 Patch 01.
But upgrade is not something that happens on the drop of a hat, we dont want to do another upgrade, I would like to know if there is a workaround.
Thanks
Pravin

MDM catalog integration with SRM 7.0

Hi all,
We will be upgrading from SRM 5.0 to SRM 7.0
We currently have CCM .....Few questins on catalog enablement for us with SRM 7:
1.With SRM 7,0,can we use CCM oor MDM is the only option???
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
5.What are additional features in SRM MDM 3.0 catalog in contrast to CCM??
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
9. Where can I find some sample catalog files for test upload?
10.What are the lastest SP for MDM available for integration with SRM 7.0??
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
I have gone through the help links but wud like ansers to above ques based on experiences of the forum members...Please provide inputs to my above queries if anybody has worked on MDM catalog integration with SRM 7.0....
Thanks for your time.

HI,
1.With SRM 7,0,can we use CCM oor MDM is the only option???
   You can use any catalogs which support SAP OCI interface.
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
   MDM Server(contents) and AS Java(for UI) are required. Please check the installation guide.
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
   Same as SRM 5.0. Define External Web Services.
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
Yes. You can use Import Manager. No issues.
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
MDM Extractor is available.
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
Mainly for contents mapping.
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
Any. Even for DB interface is also supported. You see all options when you run import manager.
9. Where can I find some sample catalog files for test upload?
Sample repository definition is delivered. You can manually create 1 entry by Data Manager.
10.What are the lastest SP for MDM available for integration with SRM 7.0??
You can find it SAP Service Marketplace. http://service.sap.com/swdc
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
You can use contract and contract items are transfered to Catalog.
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
Yes. Catalog is just Catalog.
Regards,
Masa

MDM catalogs to be used for PM-SRM scenario

Hello All,
We are in a situation where we are using the SRM-MDM scenario for regular shopping carts. And also would like to leverage these MDM catalogs for purchases made in ECC Plant Maintenance "work Orders" for non-stock ECC material numbers maintained in ECC.
These material numbers in ECC will have a Manufacturing Part Nmber (MPN) in the material master data.
Since we had some difficulty connecting these SRM-MDM catalogs directly to the ECC work order we would like to bring these requisitions generated by "Work Orders" and push them to SRM. (Standard SAP)
Once these Requisitions come into SRM as SC.. the system automatically approves this SC (Which is standard SAP) but in this process we would like to know if there is a way the system can automatically make a call to MDM based on the Manufacturing Part Number (MPN) and bring in the price and the vendor details back to the SC automatically.
Currently we are using SRM 6.0 and MDM 2.0 in our landscape..
Any suggestions will be appreciated and rewarded..
Regards
SRM6.0 Ramp-Up-Customer

Hi,
Go with: SAP Application Components"> SAP SRM"> SAP SRM ENHANCE PACKAGE" >EHP1 FOR SAP SRM 7.0>Installation -->based on -->based on SAP NW 7.02 --> 51039147_1 SRM-MDM CATALOG 7.01 1 of 5
Download relevent OS copy as its AXi and DB2. What ever It can be: OS Bit 64 or OS Bit 32.
As it's DVD so it contains all version info in lable.sca file. Read it before you start installation.
Regards,
yaniVy
reward if helps

Decimal places in SRM-MDM Catalog 3.0

Hi experts,
Iu2019m using SRM-MDM Catalog 3.0 and Iu2019ve an issue related to the decimal places configuration.
Our products are defined with 2 decimal places and after importing the records I can see them in Data Manager with the correct price information. However, when I access my catalog in EP, I can see all my records but without any decimal places. For instance, if I define a price 1.25 Eur for one product, in EP I have 1 Eur.
Can someone help me? Itu2019s really important that we can show the product correct price.
Thanks in advance.
Best regards,
Andreia Nascimento

Hi,
My problem was in MDM Data Manager - currencies table. If you choose currencies table, select your currency and check if there are any decimal places defined.
You can also check in MDM Console price table u2013 amount u2013 decimal places.
BR,
Andreia Nascimento

Multiple SRM Systems One SRM-MDM Catalog?

Hi
I'm currently upgrading our SRM 5.0 to SRM 7.01 with SRM-MDM Catalog 7.01. Is it possible to use one SRM-MDM Catalog in our non-production environment and connect multiple SRM systems to it?
For example our sandbox, development and QA SRM 7.01 systems would all connect to the same SRM-MDM Catalog 7.01.
Thanks.
Neil

Hi,
for non-production use and if it is just a catalog without custom coding running I see no problem in using one MDM server for multiple SRM systems (especially sharing one for sandboxes and dev). It is a setup I have seen multiple times and it worked always without problems.
You should set up different repositories for each SRM system so that you don't interfere with each others data (i.e. suppliers or other lookups tied to SRM).
You have to keep in mind that you have to upgrade all systems together. But you can always use separate MDM servers during the upgrade process and then consolidate onto one server when the upgrade is done.
If you are running custom coding with your MDM catalog I would recommend having a separate MDM system for the QA SRM in order to be closer to the production set-up when testing your custom solution.
Regards,
Martin

GOAs in MDM catalog

Similar Messages

Maybe you are looking for