Goes black and when you tilt it comes back on.

Macbook model A1342 goes black and when you tilt it comes back on. Is there a fix?

If your Mac is off then start up. As soon as you hear the boot chime, hold down the Option key until the Mac and Windows Disks show up. Then click on the Mac disk and the arrow below it. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.
If you are in Windows then look for the Boot Camp icon on the taskbar. It will look like a gray box sitting on one corner. One of the options when you click it is to restart in Mac OS. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.

Similar Messages

My I pad one's screen periodically goes black and when I plug it in it makes a noise. It might have a short in it or something. Can anyone help?

Hi, My ipad 1's screen goes black periodically and when I plug it in it makes a noise but does not come back on. I cannot predict when it is going to come back on or why it went out in the first place. Any suggestions? Thanks

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...
Ipad User Guide

When I call someone the screen goes black and when I won't to end the call but I can't use the screen? Help

Someone pleasee help me :)

You can't turn the sensor off or on.
First, try to reset the phone by holding the sleep and home button until the Apple logo comes back again. If thsi does not help, try to reset all settings in Settings/General/Reset -> reset all settings

Re: Can't delete emails and when I do they come back!!

I have been reading all of the online help forums and here's the problem:
I have a bunch of email spam that I want to delete.
I search in the finder and it shows a list of 405 emails that match.
I then drag these to the trash can and click delete.. and about 2 hours later I will go back to see if the files are still on my mac and the saem 405 will appear.
Here's what I have done so far:
Secure Empty Trash Takes a long time and the emails still come back
Deleting the delete.mbox files within the mail library and they still come back
Removign the index files and then waiting about three hours for my mailbox to rebuild and then they still come back.
Please help as this is now drivign me nuts!!!
Thanks in advance!
Spence

I have gone to my mail host every week and have dumped my emails and i also have my preferences set to purge after 1 month...
I went to the envelope index and tossed the file and the mac rebuil tthe enitire mailbox.. three hours.. and like 138,000 emails.. had to be rebuilt..
I have tried the command delete too and to no avail..
Sanjampet.. you are very kind to offer these suggestions.. but these emails are still here..
I have been searching for one specific group of emails and eveyr hour i delete the 405 emaisl and they come right back.. abotu an hour later.. even after a secure empty trash, email quitting and then of course a re-boot of my computer..
they are still here!!!
Spence

Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help

Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help

Hello QuinnDev,
Thank you for posting in the Apple Support Communities. It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on. I found an article that talks about closed clamshell mode. You would have to fulfill the following requirements to use your display this way:
Requirements for closed display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
You can find all the steps and the full article here:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/HT3131
I hope this helps!
All the best,
Sheila M.

When I charge my ipod, the apple symbol comes up as if it was turning on, then it goes black and repeats the process. Sometimes it gets to where I have to put in my 4 digit code to unlock it then goes black, any suggestions on why it does this?

When I charge my ipod, the apple symbol comes up as if it was turning on, then it goes black and repeats the process. Sometimes it gets to where I have to put in my 4 digit code to unlock it then goes black, any suggestions on why it does this?

Does it work OK otherwise?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try another cable and USB port and/or charging source
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Portege M400 freezes, screen goes black and fan speed increase when moved

Can someone please help me?
I recently received the Portege M400 from a friend 4 days ago and reformatted to Windows XP Tablet edition.
All was going well until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically!,
So far I have had no success in fixing this problem and I much appreciated is some one could help me!

Hi there,
I have the same laptop. Bought it from a friend also! That was a year ago. It was working perfectly till 6 months ago when I had it going 100% like yours. Screen freezes, fan speeds up and hangs up once it is moved. Recently, even if it doesnt move it hangs up also. I have tried many things like reinstalling drivers and Windows.....etc.
I dont think it is Windows problem or drivers problem, because if you run BIOS and try to move the laptop, it also hangs up!!
Tried updating the BIOS, also no benefit. I ended up opening the laptop and having a look to the motherboard (thinking that I could see something that I could fix!! But again, did not get any results.
I tried also disconnecting peripherals one by one to see whether I could spot the problem, I disconnected the battery, the hard disk, the optical drive, the wirelss modem (from inside), memory, and even the bluetooth, but could not spot the culprit.
I believe now that the problem is basically the motherboard (sort of wear and tear insulation problem) and it is beyond my humble expertise.
I am sure if I would contact TOSHIBA, they would not be of much benefit as I am a second hand user. And if I try to buy from them a main board, they will charge me hell of money.
I hope that this is helpful for you to avoid you wasting your time like me.
Please if you would come into any progress, let me know. Likewise, I would be happy to update you.

Zen screen goes black and locks up when attempting to dock to compu

When attempting to dock my Zen to my computer, it first starts like it is attempting to dock and then the screen goes black and the player locks up. I have to reset it in order to get it to come back on. This happens when trying to dock with Zen Media Explorer and Media Monkey. I have tried it on another computer and it happens there too. Help!

You are talking about a Creative Zen MP3 2/4/8/6/32 GB (flash) player?
Then check if you have the latest firmware on your Zen?
If you do have the latest firmware e.g. < Latest revision [.2.0] 28Feb08> then
try this:
Recovery Mode - If you experience one or more of the following symptoms, it is recommended that you boot the player into its unique Recovery Mode, and then clean up, format or reload the firmware.
. The player is not detected in Creative MediaSource or Windows Media Player
2. The battery does not last as expected
3. Your computer stops responding during file transfers
4. There is a power outage during file transfers
5. There is an error about firmware
6. LCD displays a "Firmware Problem" message
7. Your player is not responding.
8. The player is performing erratically <---------- - ?
Just clean-up and reboot.

I am having problems transefering contacts to my I pod when syncing the message comes back with contact in use by I pod please close and try again, please could you let me know how to close contacts on the pod or is there a setting that is wrong etc,

I am having problems transfering contacts to my I pod when syncing the message comes back with contacts in use by I pod please close and try again, please could you let me know how to close contacts on the pod or is there a setting that is wrong etc, i have restored the device. if i go to contact via settings the screen comes on for about 2 seconds and then goes off - Help

Single click on the Home button. Then double click on the Home button. In the recently used row, touch and hold the Contact app till they start to wiggle and then tap the minus sing by the contacts app.
Also make sure the Contact program on your computer is closed.

I have a first gen iPad, 64g, and for no apparent reason, the screen goes black and whatever app I am using is closed on me. It seems to be happening more and more frequently, especially when loading a blog, or trying to watch a YouTube video. I try to o

I have a iPad, 32g, and for no apparent reason, the screen goes black and whatever app I am using is closed on me. It seems to be happening more and more frequently, especially when loading apps, or trying to watch a YouTube video. I try to open safari or youtube again and it will often crash several times before it may or may not decide to load for me. It is extremely annoying and getting to the point where I can not use it

Standard troubleshooting steps in order are as follows:
Power the iPad off and on.
An iPad reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPad with iTunes from your iPad's backup.
Restore your iPad with iTunes as a new iPad or not from your iPad's backup.
If no change after the last step, your iPad has a hardware problem.

HT3964 my iMac won't boot up. I hear the chime and the Apple symbol appears but there is no whirling indicator that appears and after a while the computer screen goes black and the whole cycle starts again. There have been occasions when it has actually s

my iMac won't boot up. I hear the chime and the Apple symbol appears but there is no whirling indicator that appears and after a while the computer screen goes black and the whole cycle starts again. There have been occasions when it has actually started and I have the dashboard appear but then the screen freezes

Since you have Lion v10.7.4 installed, use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.

I just downloaded ios 7 and when I'm recording video the camera screen goes black and doesn't record anything. Also in control centre music control doesn't work sometimes. It's been three days.

I just downloaded ios 7 and when I'm recording video the camera screen goes black and doesn't record anything. Also in control centre music control doesn't work sometimes. It's been three days.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Screen Goes Black and Hangs when browsing by Artist, Album, Song, etc.

I'm having a fairly huge issue with Front Row:
I can play video files (although their is a moment of hangtime between selecting a video and the video actually playing) and music files (if I choose the "Shuffle Songs" option), however, when I choose to browse my music by artists, albums, songs, genres, etc. my screen goes black and stays that way until I hit CMD+Q over and over until it finally quits. Furthermore, when I do play music via "Shuffle Songs" and quit out of Front Row, the music continues to play in the background and cannot be stopped, paused, etc.
Is there anyone out there who can help me fix this? I love Front Row and use it all the time and it would be a shame not to be able to anymore..
Thanks in advance,
Corey

I have a similar problem. When browsing music the screen goes to black or just freezes on whatever was beeing displayed for maybe 30 seconds to a minute before continuing. It happens quite often. I am running the latest version of Front Row on a brand new Mac Mini. I have a very large iTunes music folder (about 830 gigabytes of uncompressed AIFF files) running on an external FW800 drive. I tried repairing permissions and a number of Front Row and a few iTunes files appear in the list. However, when I run repair permissions again, the same files are still listed so obviously if they need to be repaired, it's not happening. I tried repairing the volume (no problems found) and repairing permissions from the Install disc but the result was identical.

I can not get my iPad to mirror with Apple TV. When I toggle to mirror the tv screen goes black and the iPad freezes. The iPad iso is up to date

I can not get my iPad to mirror on Apple TV. When I toggle the tv screen goes black and the iPad freezes. Have updated the iOS to latest settings and also updated the settings on the Apple TV

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks :)

When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks

Let's first try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

Goes black and when you tilt it comes back on.

Similar Messages

Maybe you are looking for