Going back in iBooks after clicking link in PDF ?

In a PDF (*not* eBook!), how can I go back to where I was if I click some link? Say, that I'm browsing the ToC and accidentaly click a link going to that page: how can I quickly go back to where I was? I've seen some mentions of "Back to page xxx" but it looks as if that's only for eBooks.
(Note: using iPad 1, iOS 5.0.1 and iBooks 2.0.1)

Yes, your solution works. I changed the "Access outside webs" option from
"Custom Setup" to "Allow Adobe Reader access outside webs". (something
likes that, not exact in wording.)
But, another issue comes up:
In the web page: http://bulk.resource.org/codes.gov/
when I right-click a PDF name in the left side of this web page and select
the option "Open web page in a new Tab", then one empty new Tab comes up,
but, the PDF file is downloaded into the Firefox "Download Window", the PDF
file is NOT opened in the new Tab.
I can open the downloaded PDF file from the "Download Window" using Adobe
Reader (not inside the Firefox Browser.)
At least, I could access and get PDF files now.
Thanks for your help.
- Yan Ming

Similar Messages

IOS 7 problem after going to dodgy website after clicking link

Hi. I need to totally reset my iPhone 4 (iOS 7) after clicking link to dodgy website. Not something I normally do. Now having problems with phone. Thinking reset may help. How is this done?
Thanks

Tunes froze when I upgraded to 10.2.1.1 after recently acquiring a 3rd generation Nano to replace my 1st generation that wouldn't reset. It's all working now after uninstalling 10.2.1.1 and then installing 10.1.2. I had to delete "iTunes Library.itl" for iTunes to load. I then had add my folder to get back all my Poscasts and then re-subscribe to my relevant podcasts. After this I upgraded back to 10.2.1.1 and everything is sweet . So effectively I rebuilt my "iTunes Library.itl" file - I suspect that this file became corrupted either during the iTunes upgrade and/or introducing mt new iPod Nano and/or something else.

FF 6.0 doesn't open pdf-links, after clicking on "open pdf" error message says file not supported or damaged. IE opens file all right. Please advice.

Firefox 6.0 doesn't open pdf-links after clicking on "open pdf". I frequently need to do literature searches and I need to view pdf files in the browser. After clicking on the pdf - link of a file the main options are to open or download the pdf. Every time I try to open a pdf-file a blank page and an error message appears saying the file would not be supported or is damaged. IE, however, opens the file all right. I tried various changes in the security and cookie settings without success. Please advice.

Hi SGckc,
This document is almost certainly a dynamic XFA form. Unfortunately, our mobile Reader does not support displaying or filling such forms. The application that produces this form embeds this message into the document so that non-supportive viewers (like ours) will display this "error" page when the document opens. I do realize that this is confusing and I would like to add some additional detection to our Reader for this case. However, we've avoided doing this for fear of confusing users even further. Your feedback helps though. Hopefully we'll find a way to detect this case and present a better message to the user like: This form is not supported by the mobile version of the Adobe Reader. Please open and fill it on the non-mobile version of the Adobe Reader for Windows, Linux or Mac OSX.
Thank you for contacting us!
Pat

I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

Each camera needs a specific camera raw version (ACR). And each ACR is tied to a specific version of PS. See this list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Firefox is playing mp3/wav after clicking links to it instead of showing dialog for play/download

Firefox trying to play wavs/mp3s after clicking link to it instead of showing dialog to open/download. In preferences in applications tab I've selected "always ask" in wav and mp3 file types, but it didn't solve this problem.
== This happened ==
Every time Firefox opened
== I am unsure

Go to about:config (click "I'll be careful, I promise")
Find plugin.disable_full_page_plugin_for_types
Right click on the line of text and click Modify
If there is no value in there then enter audio/mpeg
If there are already values add ,audio/mpeg at the end (comma is important)
Click OK
Restart Firefox
Now clicking on an mp3 will ask where to download

Using DVD Player, the show goes back to menu after every chapter, even though I selected "Play Entire Episode".

It only does this on Reading Rainbow DVDs so far: Using DVD Player, the show goes back to menu after every chapter, even though I selected "Play Entire Episode". It does this whether the laptop is plugged in or is using battery power. How do I get it to play all?? Thanks.

Turns out it was NOT the software or the Mac. I bought a portable DVD player and this problem happens with it, too.

After I set a repeating alarm clock to off, it goes back to on after a few seconds.

After I set a repeating alarm clock to off, it goes back to on after a few seconds. What is happening and how do I fix it? I have an iPod touch, 4th generation, iOS 5, no jailbreak whatsoever.

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.

Does iBook support internal links in PDF eBooks?

Hello,
I am creating an eBook in Adobe InDesign. After exporting to the PDF format I create internal hyperlinks in Adobe Acrobat that allow for better usability in the digital format.
When I open the PDF eBook on the iTouch or iPad, these links do not even show up, let alone even work.
Does iBooks even support links in PDF documents?
These links work when opening in Adobe Reader and Adobe's Digital Editions eBook reader.
Thanks,
-Matt-

This appears to suggest that it does, but with issues
http://www.ipadprojectsbook.com/2010/06/22/ibooks-1-1-disoriented-pdf-links/

When on ebay or craigslist after clicking link then returning to site last link should be highlighted to save your place

saving your place after clicking a link should be highlighted

That is dependent upon how the webpage is coded - when you "go back" content is from the cache or "no-cache" content. IMO, a better way of handling that is to get in the habit of opening hyperlinks in a new tab, and when you are done viewing the content in the tab close the tab, and the page where you started will be as you left it. Once again, whether the hyperlinks show a "visited" will depend upon how the page is coded - many webpages need to be refreshed to display "visited" hyperlinks. The big advantage to opening hyperlinks in a tab is that your position on the page won't change, because you aren't "going back".

Lion goes back to sleep after 40 seconds.

If I wake up Lion with a keystroke - and then do nothing - Lion goes to sleep again after about 40 seconds. I have settings at 10 minutes.
Ok - I can live with that. BUT - if Lion wakes up with timer (alarm) - you can do automatic wake up settings in SystemSettings - it also goes to sleep again after 40 seconds. This means that my sceduled backup 4 in the morning never executes - 'cause my backup program (Personal Backup) is just about to start when Lion goes to sleep again.
So - the possibility to set automatic wake-ups in SystemSettings is not useful - if no one is at the computer and start to write or move the mouse Lion will go to sleep in 40 seconds again. Do anyone else here experienced the same? I would like to figure out if it is MY LIon or if it is a general bug in Lion. Thanks.

This happens rarely but consistently! I't seems to happen about 5% of the time waking from sleep. It MAY be more prone to happen if I had been moving with it in my bag, but it can happen at any waking time after any duration of sleep.

Laptop goes back to sleep after closing and opening lid

When I close the lid to put the computer to sleep and then reopen the lid, the computer comes back on briefly and then goes back to sleep. It will come back on if I unplug the SafMag. I've reset the SMC following the on-line instructions; I currently have SMC firmware 1.41f2.

Any advice?
Sounds like you need to take it in to an Apple Store.

Disable application switch to browser after clicking link in Mail

When I click a link in an email message, my Mac automatically switches to my browser (Firefox) to view the linked page. How can I have the link open in the background but stay in Mail?
I would like to be able to click links in email messages but keep reading email and then later switch to my browser to view all the links in my web browser.
Any hints?

This will work most of the time. I don't know how it's done, but it is possible for the link, or the message containing it, to force it to open in front of Mail even with the command key held down.

Can't download or open PDFs via links on web pages? Clicking links to PDFs in web pages only results in blank "new" tabs opening in Firefox...WHY?

Links to PDFs on webpages only opens a "new" tab which is blank. I cannot download or open PDFs. This started a couple of weeks ago.

See this support article. <br />
https://support.mozilla.org/en-US/kb/firefox-repeatedly-opens-empty-tabs-or-windows
Then view - '''Change-the-action-for-a-content-type'''

Auto-select field after clicking link inside Appearance panel

Before Illustrator CC 2014, when I clicked on a link inside the appearance window, the corresponding field would auto select. This made for a more efficient workflow. But now for some reason this has disappeared and I miss it! Hey Illustrator team, can you guys add it back in the next release?
How to reproduce:
Click on Opacity in the Appearance panel > "mini" opacity panel opens.
Opacity field should be selected so all the user has to do is click up or down arrows on their keyboard.
Just something small I noticed after I upgraded to CC 2014. Not a big deal honestly, but a small regression.

You might try the steps in this Knowledge Base article;
http://docs.info.apple.com/article.html?artnum=304482
Dah•veed

Going back to mirrored after booting unmirrored - Solaris 10 x86

Folks,
On one of my Solaris 10 x86 servers at the last reboot it failed to come up. I put back the versions of /etc/vfstab and /etc/system from before the boot drive was mirrored. "metastat" still reports the md versions of the slices are still in sync but I'm not convinced that's accurate since the failed reboot.
How do I go back to mirrored again at the next boot?
I've been reading doc 819-2789 "x86: How to Create a RAID-1 Volume From the root ..." and it looks like I need to go through most of the steps.
My best guess goes something like this -
Loop for each mounted slice - Use metadetach to remove the one not mounted. Use metaattach to add it back. Use metasync to confirm the mirror synced up again.
Once that loop has completed assume that any MBR stuff is broken. A bit like I've done with "mkboot" on SPARC but following the steps in the doc. Look at menu.lst, fdisk, installgrub, metaroot, have with and without mirror copies of /etc/vfstab and /etc/system ready just in case, reboot.
Basically all of the steps from the doc only instead of using metainit use metadetach, metaattach, metasync.
Does this make sense? It parallels stuff I've done on SPARC but I have a lot more experience on SPARC than on X86.
Thanks in advance, Doug Freyburger

freyburgerd wrote:
Folks,
On one of my Solaris 10 x86 servers at the last reboot it failed to come up. I put back the versions of /etc/vfstab and /etc/system from before the boot drive was mirrored. Exactly how you did that may matter.
"metastat" still reports the md versions of the slices are still in sync but I'm not convinced that's accurate since the failed reboot.You're absolutely correct. As soon as you write (or mount read/write) to one of the raw slices or to one of the sides of the mirror, the mirror will be out of sync, and SVM will not realize it.
How do I go back to mirrored again at the next boot?Detach the side you're not booted from. Redo the metaroot and come up on the (now one-way) mirror. Once booted from the mirror, reattach the other side.
My best guess goes something like this -
Loop for each mounted slice - Use metadetach to remove the one not mounted. Use metaattach to add it back. Use metasync to confirm the mirror synced up again.You'll want to detach before using the mirror again, but you can't attach until you stop using the raw slice. So you can't just detach/attach in one step. You'll need to reboot between them.
Once that loop has completed assume that any MBR stuff is broken. A bit like I've done with "mkboot" on SPARC but following the steps in the doc. Look at menu.lst, fdisk, installgrub, metaroot, have with and without mirror copies of /etc/vfstab and /etc/system ready just in case, reboot.
Not sure why any MBR stuff would have been affected unless you did so explicitly.
Basically all of the steps from the doc only instead of using metainit use metadetach, metaattach, metasync.
Does this make sense? It parallels stuff I've done on SPARC but I have a lot more experience on SPARC than on X86.Should be the same on both. If you're adding a new disk, you need to make sure boot support is added. But in this case I doubt any of the boot support was damaged (depending on the details of what led up to your changes).
Darren

Going back in iBooks after clicking link in PDF ?

Similar Messages

Maybe you are looking for