Going back to FCP from Color...use original format or ProRes422?

OK, so I've color graded all 5 reels for my feature film and am finally ready to send back to FCP and reassemble! I'm hoping Shane Ross can jump in here too since he's been SO helpful up to this point :-) So I have two different formats which I've graded seperately...720p DVCPROHD stuff (99%) of film and two scenes which were HDV 1080p24. So far when I've sent back my DVCPROHD clips I've rendered out of Color using ProRes422..but my Resolution Presets: and Width & Height settings are what I'm most concerned with. What I've done when sending back to FCP is use Apple ProRes 422 with Width 1280 and Height 720 and changing my Resolution Preset from 720 x 576 DV PAL to 1280 x 720 HD to match the Width and Height settings (not sure if I should leave this at 720 x 576 DV PAL??). However, the clips show up in FCP as 133%..so obviously upscaled. So now I'm going to export the DVCPRO stuff to Compressor to upscale to ProRes422 1920x1080 to bring back and match with the HDV 1080p24 footage before FINAL export to compressor again. Should I not be sending the Color clips back to FCP upscaled to 133% with my Color settings...since I will then again be upscaling in Compressor? Or will it really make that much of a difference? And also, should I check the Broadcast Safe circle in Color when sending back to FCP? I didn't color correct with the Broadcast Safe on so should I now to be on the safe side?
Thanks!
David

Ok Shane, So actually just went over my Color outputs and I did render everything as ProRes 422 at 1280x720 ...and the clips back in FCP are scaled at 100% so that's good...for some reason I remember having some that came back at 133%...maybe that was just a couple clips somewhere that were wrong...I'll figure that out...but I didn't check Broadcast Safe on the renders so I guess I can go back and re-render with broadcast safe on...so we did shoot 720p HD and I AM going back still in HD from Color.
Now I'm having another issue with the HDV 1080p24 stuff...which is actually only 20 shots of the entire film. But for some reason I'm noticing that they are interlaced when viewing on my FCP timeline, which my settings are HDTV 1080i 1920x1080...now when I export the scene out to Compressor as a ProRes 422 1920x1080 .mov it actually looks great on my computer monitor...no interlacing that I can tell, looks great. However, if I drop it onto my FCP 1080i timeline then there is interlacing again...and worse, when I make a SD DVD it is also interlaced...most noticable an actor's shirt, there is a bit of Moire effect going on...this must be because I'm downconverting to 720x486?? So I've been killing myself trying to figure this one out. Doesn't appear that deinterlacing in Compressor helps any either. Is my only option to blur it out with a gaussian blur of around 2? (the HDV clips do show as 1080p24 in FCP) Not sure if the interlacing would be gone if I were to burn a bluray since it's a higher resolution?? My settings in FCP are 1920x1080 HDTV 1080i (16:9) Pixel Aspect: Square, Apple ProRes 422 BTW.
There's also quite a bit of color blurring when watching from a burnt DVD from DVD Studio Pro...wish it looked as good as it does on my LG LED 32" screen with Matrox mini...man, do DVD's really look this bad? REALLY considering going and buying an external BluRay burner today
So if I could just get this interlacing problem resolved somehow...

Similar Messages

Sending back to FCP from Color

I have been going nuts all day about this, I have a sequence with about 20 dissolves. It is about 1 minute 30 seconds long. I applied a very simple color fx called dream.cold.cfx. I got the clips to render, that was no problem. But when I "Send to Final Cut" it comes back correctly as a "Sequence_name (from color)" but the sequence is empty is is blank. The clips are in folders labeled 1,2 ,3, 4, etc. But it dosen't come back as a sequence in FC. help me, I read the manual, I look at the discussions. I looked at my render folder settings, etc.
I need help.... it's 11:00pm here in NY and I am tired and getting ready to hit the machine with a sledge hammer.

I am running latest version Mac OS 10.53, FCP 6, I have all the latest evrything. I tried exporting XML out of color. What I hav done is just pieced together the rendered clips from the color render folders and put the dissolves back on. But this shpouldn't happen. To tell you the truth I had it right the first time I did it, but I failed to apply the effect to a very small clip in the color sequence. So when I went back to the original FCP sequence that's when it hit the fan. I had the "send to FCP" corerct, but now it is just blank when I do it. I've done it hundreds of times, changing render folders etc. I have now just rerendered as a quicktime movie and did it that way.

Sending back to FCP from Color no clips no sequence

So I am sure i am missing the blindingly obvious but would appreciate some help.
I am new ish to color but have read the manual and taken the Macpro video 1.5 training DVD to try and get up to speed.... Here is my problem:
I am sending a multiclip sequence to color (1080i pro res render). The clips appear in color and i am able to grade and render all OK.
When i send back to FCP i get a new sequence and new bin labeled with the clips.
however the sequence is empty and the bin contains a bunch of off line media. I can locate the new clips using finder but they are roughly 4 times the size of the original....
Any help appreciated

What version COLOR? Multiclip is advertised to be functionally supported by COLOR 1.5, but it is not supported in any previous version. I am not familiar with the MacPro training DVDs, so I'm not assuming that it is tied to the current version.
When you say that they "render all OK"... are you sure about that? Why are the new clips about 4x the size of the original? That doesn't register as "OK" with me....
It could be a codec issue (doubt it) and it could be a speed remap issue (why not compound a known problem with another one?) and then it could be a renderqueue misdirection...
jPo

Only one angle is playing in multi clip sent back to FCP from Color

2 camera Multiclip edited and rendered in FCP 6, sent to color, played ok after color adjustment.
Rendered in color, and sent back to FCP; second angle in the clip is blank (black).
tried different settings in color prior to sending, same result.
The multi clip plays ok in FCP prior to sending to color, and plays ok in color prior to sending to FCP.
Any idea what is being missed here to make second camera show?

The fix you can try is to Media Manage the project exporting the active Multiclip selection as independent. With that, you might even be able to create a new COLOR prj and import color corrections, so not much repeated labour.
jPo

I was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its not on

hey please help!
i was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its made no differnce its been like 3 hours ive tried to do that reset thing holding lock button and home button for 10 seconds at the same time. WHAT DO I DO?

Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Any way of going back to io7 from io8, nothing works anymore. £500 plus worth of music apps not functioning anymore, is it really worth investing any more time or money into this product? what a joke it is.

Is there any way of going back to io7 from io8?
Nothing works anymore. £500 plus worth of music apps and hardware not functioning, Apps that I have paid for disappearing from the store after a reset. is it really worth investing any more time or money into this product? what a joke it is becoming. This is worse than windows vista.
Can anyone from Apple help me with this? thought not. You don't allow reverting back to earlier io versions for some strange reason. Have you forgot that we are the customer?

Sorry, Apple does not support downgrading.
As to apps disappearing, it's not uncommon for apps to be removed from the app store. I have a couple of games that I play that are no longer available.
Did you install 8 'over the air'? If so, research into doing a restore. Use a computer to back up your device and then reinstall iOS8 via a computer, and then restore your data from the backup. Sometimes a clean install clears away glitches caused by over the air installs.
If you just wish to express your frustration to apple, on the lower right corner of this page is a 'contact us' link. Send them feedback and let them know.

After having installed Mavericks I have problems with PSCS5 and the RAW converter. The glider for Exposure goes back to zero, when I use the fill in glider.

When I use PSCS5 after having upgraded to Mavericks I have problems when I use the RAW converter. The glider for exposure goes back to sero, hven I use the glider for fill in light, that means that my PSCS5 program not can be used. What do I do?

Single click on the Home button. Then double click on the Home button. In the recently used row, touch and hold the Contact app till they start to wiggle and then tap the minus sing by the contacts app.
Also make sure the Contact program on your computer is closed.

FireFox is the best internet navigator so far, but starting from this date of July 16th 2011, I'm going back to IE and stop using FF as long as I'm still getting 20 to 25 plugin containers in my Windows Task Manager. Goodbye FF.

I have been using FF for the last 8 years. Starting from today of July the 16th 2011, I'm going back to IE and say goodbye to FF as long as I'm still getting 20 to 25 plugin containers in my Windows task manager.

I have the "techie" answer for all of you. According to the tier 2 support at Norton Help Desk, the latest live update from Norton "utilizes Visual Studio 2012 which enables SSE2 instructions" and my processor can not handle that.
He said they are "working on a solution" and offered to reply back on Wednesday / Thursday this week if a solution could be found...

Media Offline when Exporting back to FCP from STP. Lesson 10 in APTS book.

Hello, I am going through the Apple Pro Training Series Book by Martin Sitter found a road block in Lesson 10. The topic is conforming at that seems to work decently (except for garbled text in the right side of the Conform tab). My issue is when trying to export back to FCP. I choose to Send Files to FCP sequence. A new sequence is created in the selected project as expected. The audio is fine, but instead of using the video from the correct sequence, it seems to be trying to use clips from the older sequence. Additionally, all the video clips show up as Media Offline. I can reconnect media, but the problem is that it is the wrong video sequence. Oddly, in STP the video looks perfect. Is there an error in the metadata? can this be fixed or prevented? Thank you

Barreltone,
I am exporting back into Final Cut Pro via Send to Sequence. I have been exporting from the browser of FCP (sequence), and not the timeline (clips). I'm going to try that tactic, and see if that works.
DG

No Color Correction to FCP from Color

I have project that I graded in Color, I rendered it and send it back to FCP, when I viewed to clips in the FCP timeline from Color, no color correction was applied to the clips, did I do something wrong?
How do I make work properly?
Any advice would be appreciated.
Thanks
Sigi

Sigi
I am new to Color but had the same problem, I was rendering out to an external harddrive. Re-render or move your files to 'Documents Folder' > 'Color Documents' > 'Renders'.
Then re-send your color project to FCP.
I'm no expert but this might work.
Chris

How can I back up photos from iPhoto using terminal?

Can I backup my photos from iPhoto using terminal or any other way(to a portable hard drive) as I have turned my laptop on and it has came to a screen giving me the option to back up from time machine, reinstall IOS or clean my drives, but neither are working so I believe I am going to have to erase my whole hard drive and potentially get a new one, but my only problem is that I haven't backed up my iPhoto images before so is there anyway I can do this?

You are booted from Recovery Drive. Have you tried restarting so you boot normally?
See these articles for using terminal to move
http://apple.stackexchange.com/questions/80316/how-can-i-use-terminal-to-copy-al l-files-of-a-certain-type-from-a-failing-hard-d
http://macmost.com/using-terminal-to-copy-files.html
How do I move my Home folder to a separate hard drive using terminal.ff

Going back to leopard from snow leopard Can I restore from Time machine

My Imac continues to lock up about three times a day since I went to Snow Leopard.
I want to go back to Leopard where I did not have these problems.
Can I reformat and do a clean install and then restore everything from time machine even though the back up is from Snow Leopard?

You can restore the system to any previous dated state shown in your Time Machine backups. However, this will not preserve anything you created after that date. You can also restore individual files & folders from later backups but you may or may not be able to use files you created using Snow Leopard while running Leopard, depending on the parent application & if it was updated to use a new file format with Snow Leopard.
It is generally much better to resolve the issues you have with Snow Leopard & continue using it than to try to do this. Most issues are fairly easy to resolve. If you want help with that, let us know.

Ipad keeps going back to homescreen when im using an app

Whenever im playing with my games, it keep going back to homescreen and I don't know what to, please help me fix it,

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
What model iPad and what iOS is it running? You may need to update the iOS.
Is this app the only one that does this? If so, it's probably a problem with the app software. Contact the app developer.
 Cheers, Tom

When saving an image in PS CS 6, and going back to Lightroom 5. The original image and the edited image are at the end of the line up.

I'm using a Mac, Lightroom 5 and Photoshop CS 6. I've started having an issue with the line up in Lightroom 5 after saving an image from PS CS 6. For some reason when I save the edited image form CS 6 it's taking the edited image and the original image and putting it at the end of the line up in Lightroom. If I take the edited image and move it to the right of the original it will put both of them back in the line up where they should be. How do I fix this. I've been looking in the menu for some kind of setting with no luck.

Change the sort order. View->Sort

Send to FCP from color crashes

OK, I did the latest OS update and now when I have finished grading and hit send to FCP Color crashes, and generates a huge report.... Anyone having the same issue or is there a work-around?

Well, "they" killed my last reply.
In the spirit of troubleshooting, however, I have to go back to the OS, as that appears to be the last thing that was changed before you started having difficulties. We see these types of problems every time there is an OS change, whether there is a problem with the operating system or not, and widely reported on other support forums across the web. This particular release of a new OS caused a number of problems for me, similar to yours and the usual advice on almost any and every forum will be to start from scratch with fresh installs of everything. This is not always a very attractive option since many of us have downloaded software, some of which is "piracy-phobic" to the point of being nearly impossible to re-install, almost especially if you own a legitimate license. However, very often what happens with a new OS install is that a number of paths, registrations, preferences and linkages between the core system and the other applications gets broken. This may the case in your instance.
I reinstalled both the OS (Snow Leopard) and the application FCS, twice in order to attempt to stabilize my system, which now only occasionally either fails to launch or crashes/shuts down unexpectedly. I had to refresh nearly all my Utilities and will probably have to re-load SHAKE, which doesn't respond at all.
So there are a few things to look into or double-check if you suspect a system corruption as a result of an OS update. You mention that not only COLOR is affected, so it would be a good idea to look at other relatively simple applications, like Disk Utility, as a confidence booster.
jPo

Going back to FCP from Color...use original format or ProRes422?

Similar Messages

Maybe you are looking for