Going back to previous screen by clicking on back button in IE

Hi All,
We have an webdynpro application where in there are many screens and the user can move from one screen to the other by click of buttons.
I have a requirement by which the end user should be able to come back to the previous screen by clicking on "Back" button of the Internet explorer rather than from clicking of button in the application.
Can we retrieve the event handler of the back action of IE.
Is this scenario possible.If yes,the please let me know the solution.
Thanks and Regards,
Pradeep

Hi PRADEEP !!!
What you are requesting might work in some applications, but it is generally not recommended to use the explorer back button to go back. Its better to use the WD UI Button to go back.
I hope this helps, if you need some thing else, please revert back, I'll be happy to help you.
Cheers!!!
Umang

Similar Messages

Problem in BDC while going back to previous screen in FB60

Dear All,
    I have a problem in BDC my BDc stops when it tries to go back to previous screen then manually i have to click on the back button then it gets posted. the previous screen recording for FB60 is
SAPMSSY0     0120     X
BDC_CURSOR     16/32
                                                            BDC_OKCODE     =&IC1
When we do back by clicking on the screen is not getting recorded. Kindly suggest a suitable Solution for the same.
Reagrds

FB60 is an EnjoySAP transaction and not well suited to batch input (look for notes). Better to use a BAPI or batch input on FB01.
Rob

Back to previous screen

I am trying to go back to a starting point on Google Earth where I can type in a new city to search.

Thanks all for your support,
I think for this particular Tcode : MB1B and badi : MB_DOCUMENT_BADI,
we can only process it once in one go.
even if we come back to previous screen by
SET SCREEN sy-dynnr.
LEAVE SCREEN.
the data will be lost and if u put material data again and SAVE,
it will go in DUMP.
Because standard code is allowing mb1b in one go only.
FORM buchen_ausfuehren.
   DATA:
      ls_dm07m            TYPE dm07m,                        "N_763381
      ls_vm07m            TYPE vm07m.
   STATICS: statics_lock TYPE char1.                        "note 446057
   def_break 'BUCHEN_AUSFUEHREN'.                            "#EC *
statics_lock secures that BUCHEN_AUSFUEHREN is only processed once!
   IF statics_lock = x.                                     "note 446057
     MESSAGE x372(m7).                                      "note 446057
   ENDIF.                                                   "note 446057
   statics_lock = x.                                        "note 446057
But i ll try to get its general solution,
That if we want to break the flow at particular point and agin to start from the same point.
Help me if you get any such scenario.
Thanks.

My macbook turns off randomly but not completely because when I tap the touchpad it goes to the password screen and I am back to it in seconds. It's really annoying. HELP!!!

My macbook turns off randomly but not completely because when I tap the touchpad it goes to the password screen and I am back to it in seconds. It's really annoying. HELP!!!

1. Non volatile random access memory (NVRAM) is where the computer stores user's settings, like time and date, speaker volume, energy saver settings etc.
2. Reseting NVRAM has no impact on anything on your hard drive, or anything else on the computer.
See this note from Apple: http://support.apple.com/kb/ht1379

I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur

I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur

Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

New page unexpectedly loses ability to go BACK to previous page after clicking on a link in page (not consistent), why?

Firefox 4.0 Vista 32 bit
I will have a tab open, and click on a link, new page loads. The Back and Forward buttons do not work. Usually it shows in history (unless I opened too many pages before clicking on link). This has happened several times.
It is not consistent - one time I used search bar and opened a Yahoo search page - clicked on search link and when I wanted to go back to look at another search link from the previous page- page would not load (BACK button dead). I clinked search again, clicked on another link and that time it allowed me to return to the previous page???
I am about ready to go back to previous version.
Thank you.

It's a good idea to try disabling Flash completely and see whether the problem continues. If it does, then my guess is incorrect. To test that, open this tab:
orange Firefox button (or Tools menu) > Add-ons > Plugins category
Here you can locate Shockwave Flash and use the Disable button. Keep this tab open for easy access when doing your test.
''If your test confirms that Flash is causing the problem,'' then the other thread has two suggested workarounds. The first is simple to understand (keep some Flash running at all times) but may be inconvenient to do all the time. The second is trickier because it requires editing a file in (or creating and then dragging a file into) a system folder. Fortunately you only need to do it once.

Internet jumps back to previous screen without warning

Hi,
Within the last week I've noticed my internet is jumping back to the previous screen without warning. I will be on firefox looking at one screen and then all the sudden I am looking at the previous screen. It does it maybe every 10 minutes. I have a MacBook Pro that I only just got December 2011. Does anyone have a clue what's wrong?
Thanks!

Are you using the TrackPad or a Mouse? If TrackPad there is a gesture feature, Swipe left/right with 2 fingers, that causes you to go Back or Forward in most web browsers. Make sure that is not what is happening. I do it myself sometime just be accident. Annoying, yes.

How do i close the welcome to iMovie screen? Clicking on red button in upper left does nothing. SOS! Thanks!

How do I close the "Welcome to iMovie" screen? Clicking on the red button in the upper left does nothing. SOS! Thanks!

"Continue" was hidden at the bottom of the welcome screen because my display was changed. Some days I'm smarter than others. Or.... :-)

Log off screen on click of UI Button

Hello Friends,
We have a WD ABAP application which we are going to use with the application URL. Currently I have created the Log off button with the help of below mention Blog. and the button is working fine for closing the window.
How to close parent window in Webdynpro applications?.
But this blog is useful for closing the parent window , I want the functionality when users run the application URL it should always ask for Login and when click on Log off button it should log off the user and again Login screen should appear.
Currently because of browser cache or I don't know why its directly showing the application screen .
Please suggest some solution .
Thanks in advance
Himani Saxena

Hi,
Application logoff will log off and close the window. check this help http://help.sap.com/saphelp_nw04s/helpdata/en/fc/04a5421935c511e10000000a1550b0/content.htm
If you want to display login screen again you can use exit plug and pass your web dynpro application url again.
Or you can design with outbound and inbound plugs accordingly.
check this help docu for exit plug reference: http://help.sap.com/saphelp_nw04s/helpdata/en/45/1bc575ba064574e10000000a114a6b/content.htm
If you dont want to close window. pass space to close_window parameter.
Also check this article for ref: [Exit Plug in WDA|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0018077-f0c9-2b10-87af-eb9bb40776d4?QuickLink=index&overridelayout=true]
Hope this helps u.,
Thanks & Regards,
Kiran.

Just got an imac and am trying to transfer itunes library from Dell pc via home share method. All goes well but directions say to click the import button. I don't see an import button anywhere. If I close itunes on pc it also disappears from imac.

Just got an imac and am trying to transfer itunes library from dell pc using home share method. All goes well until the end when directions say to click import button. I don't see one anywhere. If I shut down itunes in the pc the library also disappears from the imac. Am I doing something wrong?

ronaldfromoaklyn wrote:
All goes well until the end when directions say to click import button. I don't see one anywhere.
check the lower right corner of the iTunes window
if you don't see this while the homeshared library is loaded, home sharing hasn't been set up properly.
If I shut down itunes in the pc the library also disappears from the imac. Am I doing something wrong?
no.
that's expected behavior.

How far back is the screen supposed to push back?

I feel like it never used to be this far back at this angle. Is anyone else having this problem or is it supposed to go back this far? it's like at an 160 degree angle.. as far back as I can push it.

Hi Insomnia: It's kind of difficult to see exactly from the picture, but I would say it is going back further than my MacBook Pro. Looks pretty much the same as all MacBooks or Pros I've seen.
Stedman

Backing up oracle database by click of a button

Hi guys, Is there any script I can attach to a button in oracle forms 6i or a script I can attach to desktop shortcut so that when a user clicks on it, it starts database backup.
Thanks
Jideofor

ol**** wrote:
Hi guys, Is there any script I can attach to a button in oracle forms 6i or a script I can attach to desktop shortcut so that when a user clicks on it, it starts database backup.
Thanks
JideoforHere you can do one things, create a form make a text file and two button write code on first button for selection the file and second button write the following code
make a 2nd button
1st button
:CONTROL.file_name     := GET_FILE_NAME(directory_name => '', select_file => FALSE);2nd button
DECLARE
     un                    VARCHAR2(30);
     pw                    VARCHAR2(30);
     db                    VARCHAR2(30);
     con_str          VARCHAR2(100);
     data_file     VARCHAR2(100);
     log_file     VARCHAR2(100);
     cmd_line     VARCHAR2(200);
     ALT NUMBER;
BEGIN
     IF :CONTROL.file_name IS NULL THEN
          IF SHOW_ALERT('FILE_NAME') = ALERT_BUTTON1 THEN
               RAISE FORM_TRIGGER_FAILURE;
          END IF;
     END IF;
     un     := GET_APPLICATION_PROPERTY(USERNAME);
     pw     := GET_APPLICATION_PROPERTY(PASSWORD);
     db     := GET_APPLICATION_PROPERTY(CONNECT_STRING);
     con_str     := un||'/'||pw||'@'||db;
     data_file     := :CONTROL.file_name||'\'||un||
                                    TO_CHAR(SYSDATE, 'DDMMYYYY')||'.dmp';---control.fine_name is a location selected by button
     cmd_line     := 'c:\oracle\ora92\bin\exp userid='||con_str||' file='||data_file;
     HOST(cmd_line);
     ALT:=SHOW_ALERT('MULTI_BACKUP');
     IF ALT=ALERT_BUTTON1 THEN
          RAISE FORM_TRIGGER_FAILURE;
     ELSE
          EXIT_FORM;
     END IF;
END;Edited by: HamidHelal on Mar 4, 2012 9:30 PM

Going back to earlier screen (navigation) in ALV interactive screen

Hi all,
I have requirement of going to 4th alv screen on clicking back on screen 5.(all 5 screens are ALV).But it comes out to selection screen instea going to screen 4(ALV).Please guide me for the same.
Thank you.
Edited by: sanu debu on Mar 29, 2009 10:51 AM
Edited by: sanu debu on Mar 29, 2009 10:53 AM

Hi ,
use it this way....
firstly set flag for each screen when you dislpay them say for the first screen you set the flag = 1 and for second u set it to 2 and so on.... then in the call function use as used below... important user_command to be passed
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
i_callback_user_command = 'USER_COMMAND'        " this is the subroutine of your program where you control the navigations....
i_callback_pf_status_set = 'PF_STATUS'
it_fieldcat = it_field
TABLES
t_outtab = i_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
FORM USER_command using rs_ucomm type sy-ucomm rs_selfield type slis-selfield.
   case rs_ucomm.
     when 'BACK' or 'RW' or '%EX'.
           if flag = 5.
               flag = 4.
"               call the subroutine which displays the fourth ALV screen or call the FM reuse with the table used in fourth screen.
          elseif flag = 4.
             flag = 3.
"               call the subroutine which displays the third ALV screen or call the FM reuse with the table used in third screen.
          elseif flag = 3.
             flag = 2.
"               call the subroutine which displays the second ALV screen or call the FM reuse with the table used in second screen.
          elseif flag = 2.
             flag = 1.
"               call the subroutine which displays the first ALV screen or call the FM reuse with the table used in first screen.
          elseif flag = 1.
leave to screen 0.
   endcase.
endform.
Hope this resolves the issue
Regards,
Siddarth

Going back to selection screen from ALV

Hi there,
I have scenario: program -> selection screen -> ALV
In the 'BACK' button I have put: LEAVE TO SCREEN 0. It should go back to selection screen. But it does not and exits the program. I also tried to call the selection screen like CALL SELECTION-SCREEN 1000. But in this case if I hit BACK on selection screen, it goes back to previous screen, the ALV not the program. Can you please assist any other way to use the back button from
ALV -> Selection screen. Thanks.
Regards,

Hi Johnny
Previously i got the same requirement according to that i had developed a report just go through this hope it may helpfull very much
*& Report ZALVDEMO *
REPORT ZALVDEMO.
TABLES : J_1IEXCHDR, " header table
J_1IEXCDTL, " item table
J_1IPART2, " Excise Part II details
LFA1, " vendor master table
J_1IMOVEND, " vendor excise details table
MSEG, " Document Segment: Material
MKPF, " Header: Material Document
DD07T, " domain text table
T001W. " Plant and Branch Details
DATA : BEGIN OF IT_CHDR OCCURS 100,
DOCNO LIKE J_1IEXCHDR-DOCNO,
DOCYR LIKE J_1IEXCHDR-DOCYR,
EXNUM LIKE J_1IEXCHDR-EXNUM,
EXDAT LIKE J_1IEXCHDR-EXDAT,
WERKS LIKE J_1IEXCHDR-WERKS,
EXBED LIKE J_1IEXCHDR-EXBED,
EXCCD LIKE J_1IEXCHDR-EXCCD,
ECS LIKE J_1IEXCHDR-ECS,
END OF IT_CHDR.
DATA : BEGIN OF IT_CDTL OCCURS 100,
DOCYR LIKE J_1IEXCDTL-DOCYR,
DOCNO LIKE J_1IEXCDTL-DOCNO,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
LIFNR LIKE J_1IEXCDTL-LIFNR,
MATNR LIKE J_1IEXCDTL-MATNR,
MAKTX LIKE J_1IEXCDTL-MAKTX,
CHAPID LIKE J_1IEXCDTL-CHAPID,
EXBAS LIKE J_1IEXCDTL-EXBAS,
EXBED LIKE J_1IEXCDTL-EXBED,
ECS LIKE J_1IEXCDTL-ECS,
MENGE LIKE J_1IEXCDTL-MENGE,
MEINS LIKE J_1IEXCDTL-MEINS,
RDOC2 LIKE J_1IEXCDTL-RDOC2,
END OF IT_CDTL.
DATA TEXT(10).
DATA : BEGIN OF IT_OUT OCCURS 0,
SERIALNO LIKE J_1IPART2-SERIALNO,
TEXT1 LIKE TEXT,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
NAME LIKE LFA1-NAME1,
DDTEXT LIKE DD07T-DDTEXT,
EXCCD LIKE J_1IEXCHDR-EXCCD,
BUDAT LIKE MKPF-BUDAT,
EXBAS LIKE IT_CDTL-EXBAS,
EXBED LIKE IT_CDTL-EXBED,
ECS LIKE IT_CDTL-ECS,
MATNR LIKE IT_CDTL-MATNR,
MAKTX LIKE IT_CDTL-MAKTX,
CHAPID LIKE IT_CDTL-CHAPID,
MENGE LIKE IT_CDTL-MENGE,
MEINS LIKE IT_CDTL-MEINS,
DEL_IND(1),
END OF IT_OUT.
DATA IT_PART2 LIKE J_1IPART2 OCCURS 0 WITH HEADER LINE.
DATA S_NO(4) .
DATA DB_CNT LIKE SY-TABIX.
DATA EBELN_T LIKE MSEG-EBELN .
TYPE-POOLS : SLIS.
DATA : AFIELD TYPE SLIS_FIELDCAT_ALV.
DATA : LIST_HEADER TYPE SLIS_T_LISTHEADER,
FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
LS_FTCAT TYPE LVC_S_FCAT,
SORTCAT TYPE SLIS_T_SORTINFO_ALV,
SORTCAT_LN LIKE LINE OF SORTCAT,
G_REPID LIKE SY-REPID,
G_BACK_GROUND(70), "like bapibds01-objkey,
GS_VARIANT LIKE DISVARIANT,
G_SAVE ,
GT_EVENTS TYPE SLIS_T_EVENT,
ALV_EVENT TYPE SLIS_ALV_EVENT,
EVENTCAT TYPE SLIS_T_EVENT,
EVENTCAT_LN LIKE LINE OF EVENTCAT,
LAYOUT_IN TYPE SLIS_LAYOUT_ALV,
LAYOUT_IN1 TYPE SLIS_LAYOUT_ALV.
CONSTANTS : GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE
'TOP_OF_PAGE',
GC_FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE
'USER_COMMAND',
GC_FORMNAME_BEFORE_OUTPUT TYPE SLIS_FORMNAME VALUE
'BEFORE_OUTPUT'.
* ALV_EVENT TYPE SLIS_ALV_EVENT,
DATA EX_NO LIKE IT_CHDR-EXNUM VALUE 0.
DATA REGTYP_1 LIKE J_1IPART2-REGTYP.
SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME.
PARAMETERS WERKS TYPE J_1IEXCHDR-WERKS.
SELECT-OPTIONS : BUDAT FOR J_1IEXCHDR-EXDAT.
PARAMETERS : R1 RADIOBUTTON GROUP GRP DEFAULT 'X',
R2 RADIOBUTTON GROUP GRP.
SELECTION-SCREEN END OF BLOCK B.
INITIALIZATION.
G_REPID = SY-REPID.
G_SAVE = 'A'.
* PERFORM BUILD_EVENT USING GT_EVENTS[].
PERFORM ALV_EVENT_INIT.
AT SELECTION-SCREEN.
REFRESH LIST_HEADER.
PERFORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER.
START-OF-SELECTION.
* PERFORM ALV_EVENT_INIT.
G_REPID = SY-REPID.
G_BACK_GROUND = ' ' .
IF R1 = 'X'.
CLEAR R2. CLEAR : REGTYP_1.
REGTYP_1 = 'A'.
* set titlebar 'BALAJI' with DB_CNT.
ELSEIF R2 = 'X'.
CLEAR R1.CLEAR : REGTYP_1.
REGTYP_1 = 'C'.
* set titlebar 'BALAJI1' with DB_CNT.
ENDIF.
SELECT * FROM J_1IPART2
INTO CORRESPONDING FIELDS OF TABLE IT_PART2
WHERE REGTYP = REGTYP_1 AND
TRNTYP = 'GRPO' AND
BUDAT IN BUDAT.
* DOCYR = IT_CDTL-DOCYR AND
* DOCNO = IT_CDTL-DOCNO.
LOOP AT IT_PART2.
SELECT SINGLE * FROM J_1IEXCHDR
INTO CORRESPONDING FIELDS OF IT_CHDR
WHERE TRNTYP = 'GRPO' AND
DOCYR = IT_PART2-DOCYR AND
DOCNO = IT_PART2-DOCNO AND
WERKS = WERKS AND
exdat IN BUDAT.
* ORDER BY EXDAT.
IF SY-SUBRC = 0.
APPEND IT_CHDR.
ELSE.
CONTINUE.
ENDIF.
* IF SY-SUBRC <> 0.
* MESSAGE E084.
* ENDIF.
ENDLOOP.
LOOP AT IT_CHDR.
SELECT * FROM J_1IEXCDTL
INTO CORRESPONDING FIELDS OF IT_CDTL
* FOR ALL ENTRIES IN IT_CHDR
WHERE
TRNTYP = 'GRPO' AND
DOCNO = IT_CHDR-DOCNO AND
DOCYR = IT_CHDR-DOCYR AND
EXNUM = IT_CHDR-EXNUM AND
EXDAT = IT_CHDR-EXDAT AND
WERKS = IT_CHDR-WERKS.
IF SY-SUBRC = 0.
APPEND IT_CDTL.
ELSE.
CONTINUE.
ENDIF.
ENDSELECT.
ENDLOOP.
LOOP AT IT_CDTL.
CLEAR TEXT.
DB_CNT = DB_CNT + 1.
READ TABLE IT_CHDR WITH KEY EXNUM = IT_CDTL-EXNUM.
READ TABLE IT_PART2 WITH KEY DOCNO = IT_CDTL-DOCNO .
IT_OUT-SERIALNO = IT_PART2-SERIALNO.
SELECT SINGLE NAME1 FROM LFA1
INTO IT_OUT-NAME
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM LFA1
WHERE LIFNR = IT_CDTL-LIFNR.
IF LFA1-LAND1 EQ 'IN'.
TEXT = 'INVOICE'.
IT_OUT-TEXT1 = TEXT.
ELSE.
TEXT = 'BOE'.
IT_OUT-TEXT1 = TEXT.
ENDIF.
SELECT SINGLE * FROM J_1IMOVEND
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM DD07T
* INTO IT_OUT-DDTEXT
WHERE DOMNAME = 'J_1IVTYP' AND
DDLANGUAGE = 'EN' AND
DOMVALUE_L = J_1IMOVEND-J_1IVTYP.
IF DD07T-DDTEXT = 'First Stage Dealer of indigenous excisable goods'
OR
DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisablegoods'.
DD07T-DDTEXT = 'Dealer'.
ENDIF.
IT_OUT-DDTEXT = DD07T-DDTEXT.
* ELSEIF DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisable
*goods'.
* DD07T-DDTEXT =
CLEAR EBELN_T.
SELECT SINGLE LFBNR FROM MSEG
INTO EBELN_T
WHERE MBLNR = IT_CDTL-RDOC2 .
SELECT SINGLE * FROM MSEG
WHERE BWART = '106' AND
LFBNR = EBELN_T ."and
* ebeln = ebeln_t.
IF SY-SUBRC = 0.
IT_OUT-DEL_IND = 'X'.
ELSE.
IT_OUT-DEL_IND = ' '.
ENDIF.
SELECT SINGLE BUDAT FROM MKPF
INTO IT_OUT-BUDAT
WHERE MBLNR = EBELN_T ."MSEG-LFBNR.
IT_OUT-EXNUM = IT_CDTL-EXNUM.
IT_OUT-EXDAT = IT_CDTL-EXDAT.
IT_OUT-EXCCD = IT_CHDR-EXCCD.
IT_OUT-EXBAS = IT_CDTL-EXBAS.
IT_OUT-EXBED = IT_CDTL-EXBED.
IT_OUT-ECS = IT_CDTL-ECS.
IT_OUT-MATNR = IT_CDTL-MATNR.
IT_OUT-MAKTX = IT_CDTL-MAKTX.
IT_OUT-CHAPID = IT_CDTL-CHAPID.
IT_OUT-MENGE = IT_CDTL-MENGE.
IT_OUT-MEINS = IT_CDTL-MEINS.
APPEND IT_OUT.
* EX_NO = IT_CDTL-EXNUM.
ENDLOOP.
* Title Portion
IF REGTYP_1 = 'A'.
SET TITLEBAR 'BALAJI' WITH DB_CNT.
ELSEIF REGTYP_1 = 'C'.
SET TITLEBAR 'BALAJI1' WITH DB_CNT.
ENDIF.
AFIELD-COL_POS = 1.
AFIELD-FIELDNAME = 'SERIALNO'.
AFIELD-SELTEXT_L = 'INPUTS'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 2.
AFIELD-FIELDNAME = 'TEXT1'.
AFIELD-SELTEXT_L = 'TYPE OF DOC'.
AFIELD-JUST = 'L'.
AFIELD-DECIMALS_OUT = '0'.
AFIELD-NO_ZERO = 'X'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 3.
AFIELD-FIELDNAME = 'EXNUM'.
AFIELD-SELTEXT_L = 'DOC.NO'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 4.
AFIELD-FIELDNAME = 'EXDAT'.
AFIELD-SELTEXT_L = 'DOC.DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 5.
AFIELD-FIELDNAME = 'NAME'.
AFIELD-SELTEXT_L = 'NAME OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 6.
AFIELD-FIELDNAME = 'DDTEXT'.
AFIELD-SELTEXT_L = 'TYPE-OF-SUPPLIER'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 7.
AFIELD-FIELDNAME = 'EXCCD'.
AFIELD-SELTEXT_L = 'ECC OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 8.
AFIELD-FIELDNAME = 'BUDAT'.
AFIELD-SELTEXT_L = 'INPUT RECV DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 9.
AFIELD-FIELDNAME = 'EXBAS'.
AFIELD-SELTEXT_L = 'ASSESSABLE-VALUE'.
AFIELD-DO_SUM = 'X'.
AFIELD-JUST = 'R'.
AFIELD-DECIMALS_OUT = '2'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 10.
AFIELD-FIELDNAME = 'EXBED'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN CENVAT'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 11.
AFIELD-FIELDNAME = 'ECS'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN E-CESS'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 12.
AFIELD-FIELDNAME = 'MATNR'.
AFIELD-SELTEXT_L = 'MATERIAL-CODE'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 13.
AFIELD-FIELDNAME = 'MAKTX'.
AFIELD-SELTEXT_L = 'DESCRIPTION'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 14.
AFIELD-FIELDNAME = 'CHAPID'.
AFIELD-SELTEXT_L = 'TARIFF-ID'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 15.
AFIELD-FIELDNAME = 'MENGE'.
AFIELD-SELTEXT_L = 'QUANTITY'.
AFIELD-JUST = 'R'.
AFIELD-DO_SUM = ' '.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 16.
AFIELD-FIELDNAME = 'MEINS'.
AFIELD-SELTEXT_L = 'UOM'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 17.
AFIELD-FIELDNAME = 'DEL_IND'.
AFIELD-SELTEXT_L = 'Deleted'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
* * LAYOUT FOR ZEBRA CATLOG
LAYOUT_IN-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT_IN-ZEBRA = 'X'.
LAYOUT_IN-GET_SELINFOS = 'X'.
LAYOUT_IN-CONFIRMATION_PROMPT = 'X'.
LAYOUT_IN-DETAIL_POPUP = 'X' .
* SORTCAT-decimals = '0'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_SAVE = G_SAVE
IS_VARIANT = GS_VARIANT
IT_FIELDCAT = FIELDCAT
IT_SORT = SORTCAT
IS_LAYOUT = LAYOUT_IN
IT_EVENTS = EVENTCAT
* I_BACKGROUND_ID = g_back_ground
TABLES
T_OUTTAB = IT_OUT.
*& Form TOP_OF_PAGE_LIST_HEADER
* text
* -->LIST_HEADERtext
FORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER TYPE SLIS_T_LISTHEADER.
DATA : HLINE TYPE SLIS_LISTHEADER,
TEXT(60) TYPE C.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
* WRITE 'ROOTS INDUSTRIES LTD' TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
SELECT SINGLE * FROM T001W WHERE WERKS = WERKS.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'PLANT :' TO TEXT.
WRITE WERKS TO TEXT+8.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-NAME1 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-STRAS TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-ORT01 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'DATE :' TO TEXT.
WRITE BUDAT-LOW TO TEXT+7.
IF BUDAT-HIGH NE ''.
WRITE 'TO' TO TEXT+18.
WRITE BUDAT-HIGH TO TEXT+22.
ENDIF.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
ENDFORM. "TOP_OF_PAGE_LIST_HEADER
*& Form ALV_EVENT_INIT
* text
FORM ALV_EVENT_INIT .
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
ALV_EVENT-FORM = 'ALV_TOP_OF_PAGE'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_LIST.
ALV_EVENT-FORM = 'ALV_TOP_OF_LIST'.
APPEND ALV_EVENT TO EVENTCAT.
* CLEAR ALV_EVENT.
* ALV_EVENT-NAME = SLIS_EV_END_OF_LIST.
* ALV_EVENT-FORM = 'ALV_END_OF_LIST'.
* APPEND ALV_EVENT TO GT_EVENTS.
* CLEAR ALV_EVENT.
* ALV_EVENT-NAME = SLIS_EV_END_OF_PAGE.
* ALV_EVENT-FORM = 'ALV_END_OF_PAGE'.
* APPEND ALV_EVENT TO GT_EVENTS.
ENDFORM. "ALV_EVENT_INIT
*& Form ALV_TOP_OF_PAGE
* text
FORM ALV_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LIST_HEADER
I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "ALV_TOP_OF_PAGE
*& Form BUILD_EVENT
* text
* -->P_GT_EVENTS[] text
FORM BUILD_EVENT USING P_EVENTS TYPE SLIS_T_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = P_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_USER_COMMAND TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_BEFORE_OUTPUT TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
ENDFORM. " BUILD_EVENT
Reward if helpfull
Regards
Pavan

Everytime i click on my ipad contact app it goes to the main screen

Hi,
Everytime iclick on my contact app it goes back to my screen help please
Cheers
Paulbrookes4

Try toggling Settings > iCould > Contacts off and on and see if it then works.
If it doesn't then try closing Settings completely and then re-open it : from the home screen (i.e. not with Settings 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Settings app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Going back to previous screen by clicking on back button in IE

Similar Messages

Maybe you are looking for