Going black and white

I have 2 questions.
1: how can I make part of my video black and white?
2: a little more advanced than the first question, how can I make most of a scene black and white whilst keeping one or two characters/objects in color?

http://www.proapptips.com/proapptipsvideotutorials/879F6B61-CFF9-4FD1-8D43-FDF89 605611A/5FB37E30-CA68-42CF-9492-E8E89FAFE83F.html

Similar Messages

How come my ipad keeps on going black and white with the lago

hi
i was just on my ipad trying to get music off my ipad to my laptop than a note came up and said do u want to update your ipad i than press update 30 mins later my ipad keep going black and white with the lago
pleases help me or tell me what i can do with this/fix

The update does take time and 30 minutes is not unusual. Is there anything else happening on your screen such as a long bar that fills in very slowly?

How do i change my screen back to color it is black and white?

My husbands iphone 5 is acting up. First screen is black and white-tried switching toggle in Accessibility but didn't do anything. Second his contacts keep disappearing and third the battery is dying frequently. Any ideas?

Can you go into detail about the screen going black and white? What do you mean by this?

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Printing in black and white from an ipad on a deskjet 2540 without going through a router

My wife purchased a HP Deskjet 2540 all in one so that she can print directly from her ipad. She is going directly to the printer not through our router. It works great except that everything is printed in color? And unable to adjust the size such as fit to page etc.
How do we get it to print directly from the ipad in black and white and is there a way to set the size eg: Fit to page etc.???

noknowledge wrote:
My wife purchased a HP Deskjet 2540 all in one so that she can print directly from her ipad. She is going directly to the printer not through our router. It works great except that everything is printed in color? And unable to adjust the size such as fit to page etc.
How do we get it to print directly from the ipad in black and white and is there a way to set the size eg: Fit to page etc.???
You most likely need to download the HP app for your iPad to do the correct print settings to properly print - this might be the case here. If you still download and install the HP app and it doesn't work then there might be a limit to what your iPad can do for prints.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

When I import my photos into lightroom 4 they all turn to black and white...what is going on?

When importing the photos are color...but when I go to the develop module the all start going to black and white...before my eyes!

sounds like you either got a black and white preset selected in the 'Apply During Import' section of the Import Dialog (over on the right), or you've created a default setting in Develop. For the first, make sure no Develop preset is selected. For the second hold down your Alt key on PC, or Option key on Mac in the Develop Module. The Reset button will turn into 'Set Default...' on the bottom of the right panel. This will open a dialog box. Choose the left button that says 'Restore Adobe Default Settings'.

Trying to update and my nano screen goes from color to black and white...

Last time this happened I lost all of the information on my ipod.
I was trying to get my newly purchased music from itunes to my nano. I couldn't. The help sections told me to update my ipod. I'm currently trying to update with 2006-03-23 and the screen still says "initializing" and actually as I type this the screen that says initializing appears frozen (although I've learned apple stuff is weird because it appears frozen but it's not). How long should this take? Is there something I'm doing wrong? Why does my ipod screen go from color to black and white? Do I need to redo anything? Do I need to reset my nano?
Please help with the ******** mac user (I've always used Windows and I am lost in the mac world apparently when it comes to ipods)

Can you get the exact wording for that error? Is it can't mount iPod?
Also, make sure iTunes is up to date...
iTunes
Finally, make sure your iPod's battery is charged up.
btabz

Black and White conversion issues going from LR to PS

When I take a black and white image directly from Lightroom to Photoshop using "Edit in Photoshop", the black and white conversion doesn't stay true. My image, once opened in PS, is mostly black and white, but has green and magenta casts running throughout. Anyone know how to resolve this without just gray scaling the image again once in PS?
Screen grab from LR on the left, and PS on the right.
Thanks.

Geoff the kiwi wrote:
How does the OP's green/magenta colouring equate to your stated red/cyan?
Well, it looks cyan to me. Here it is with saturation boost - assuming the OP made the screenshot correctly, assigning the display profile:
In any case, the Photoshop bug is well known and well documented, showing up as cyan shadow banding in ProPhoto files, when GPU is set to "Normal" or "Advanced" mode.
I'm not saying the display profile isn't involved, it most certainly is. The whole issue is the conversion into the display profile. And it also shows to varying degree with different display profiles - sometimes just subtle cyan bands, easily missed until you look for it, other times more pronounced and with secondary red banding (like here).
It also happens with sRGB as display profile. So the bug is real, no question about that.
What's different here is that there's cyan also in the highlights. But that could be the screenshot - or it could be "just" a bad display profile. I'm not ruling that out, just pointing out that there is a more likely explanation in this case.

FF windows go black and white and everything seems to stop when it is a bit busy. Why is this? Why on a fast quad machine, can FF not keep going? Do I need to adjust settings?

From time to time FF seems to freeze temporarily and the windows all go black and white. FF will not then respond. After a while (many seconds) the colour comes back to the windows and it responds again.
I have a fast quad machine so it seems odd that everything needs to stop because something somewhere is not responding as wished.
It has behaved like this for many versions but I have never found an explanation.

It's in warranty. Take it in for service to be sure this isn't a hardware problem.

My Imac has black and white vertical lines

Riddle me this Apple...
A few months ago, my 2008 Aluminium 24inch Imac locked up and exhibited space invader style pixels all over the screen.
After rebooting, it was fine for a while and then it would freeze again and I'd get the same Atari style pixels appearing, and everything would be frozen.
Then, most reboots after that, I would get vertical lines in groups of three, alternating black and white squares as in the photo.
I called Apple here in South Australia, and they said "it's your graphics card, and it will cost $400 to fix and we need it for a week".
Not wanting to do that, I bought a $15 firewire cable, booted the Imac in T mode and used my PC laptop running macdrivepro to save all my files onto a 500gig backup drive, and then proceeded to fix the corrupted kext files and most importantly delete the recent flash player update which I believe was causing the problem.
Booted her back up, and she ran perfectly. For a few weeks, until it started again.
So I re-installed the Leopard operating system from the original disks, and that fixed it. $15 is better than $400.
Now, a few months have passed, and the problem had come back again, now that I have added more stuff on my computer.
This time however, I chose to wipe the drive completely and do a fresh install of Leopard, and then upgrade to Snow Leopard.
The problem is that it won't boot from the CD drive anymore, won't boot from a thumb drive, won't boot in any mode except T mode, but then it has these lines on the screen again and eventually I get the kernel panic happenning and it wants to be shut down.
Every time I start the computer, these lines IMMEDIATELY appear. I've tried resetting the Pram, tried changing memory and have now resorted to surgery.
I've taken apart the Imac, yes I hear you Apple...you guys thought that we mortals wouldn't delve into the depths of your finely machined systems, however, some of us do own micro torx head tools to remove those pesky screws, and yes, a razor blade does lift up the magnetically attached screen glass without having to use suction pads.
So once inside the temple of doom, I removed the hard drive, and dropped it into a hard drive dock.
After days of messing around with it via four other MAC computers, running Tiger, Leopard and Lion, we have still not been able to install an operating system back onto this drive.
Does anyone have any insight into what these lines actually are? Every one I speak to says a different thing...
"It's the graphics card", "It's the hard drive", "It's the cable that connects the LCD screen", "It's the motherboard", It's the screen itself", "It's a corrupted bios" etc etc..
But if it's any of those things...then why did it run perfectly after I fixed it the first time?
Any and all help is greatly appreciated.

Hi BDAqua,
I appreciate you taking the time to reply, and for the suggestions.
My spider sense was tingling, as were my eager fingers to login and read your reply, in fact I was almost salivating at the thought of crushing those Apple reps with a swift blow from one of my megalithic old 4gig internal drives, or better still, perhaps shooting my old DX266 sporting a massive 256k HD and 4mb of ram, fully loaded with Encarta and Windows 3.11 out of a cannon and straight into Steve Jobs bedroom window, with a note saying..."How'd ya like them apples..".
But alas, my Aquatic friend, I am in need of a functioning operating system to be able to do any of those magical tricks you suggested (insert frown face here)..and yes, when I finally opened up the Imac and peered inside, a moment not unlike Indiana Jones peering down into the depths of the Well of Souls, I suddenly realised that an Imac might look impervious to heat vision and thermonuclear devices on the outside, but inside they can still gather as much dust as my infinately useless ZIP drive that I bought back in the late 90's, thinking it was the best thing since the invention of microsoft paint...awesome program by the way guys..
Getting back to the problem at hand, the issue really is that I have, perhaps stupedly, reformatted the 500gig WD drive via a hard drive dock, which is really a lot like one of those early 1950's cassette drives you find in vintage cars..
And upon returning the drive to the Imac and re-assembling it WITH REAL SCREWS, not titanium-alloy fingerprint encoded ones like you would expect to find in Iron Man's suit, I could only boot the poor thing into T mode. No other modes were available, and believe me, I tried all of the alphabet...even the "C" button, which if you ever watched an episode of Knight Rider called Knight of the Juggernaught, did not turn my computer into a convertable..
By now you're probably sensing that the irony of all of this is that I am typing this message on my Windows 7 upgraded HP laptop, which sounds not unlike a jumbo jet taking off at times, the fans are so loud, and among other things, it keeps telling me it is not genuine, even though I paid good money for a proper copy to free me from the painful experience which was Vista, and so in a sense, microsoft is playing a small part in the desperate rescue of it's far superior, yet broken down and busted arch enemy...I bet somewhere in it's RAM, it is smiling in little ones and zeroes, while it hides behind a free copy of AVAST, hoping one of a billion nasty viruses don't come knocking on the kernel door..
The next round of drinks goes to the man, woman, child or droid that has any other suggestions that could allow me to participate in some of the ideas put forward by our very knowledgable watery friend..as alas, I do not have any of those options available to me.
Today's assignment is.. how do we install an operating system on a formatted external drive. Sounds easy doesn't it...I've read many articles, but in practice it's proved as elusive as Bigfoot.
I just cannot make this hard drive understand that there is no spoon...
EdStraker

Black and White Tv Pictures with Qosmio G10-106

Grey hairs and going bald from pulling hair out. Bought Toshiba G10-106 in Jan 05,living in Ireland using ordinary Tv cable for laptop and cannot get Tv to work properly.B&w images are the best ive got so far.
Is there compatability issues with Toshiba driver and Windows MCE?Also if i launch Tv without booting windows i get one channel(E4) in colour but totally fuzzy. Would love to have this cracked as spent lot of dosh on the laptop and am relatively new to computers and would like some feel good factor rather than depression.
Thanks all.

Sorry,i should have clarified. My hopes were to watch TV on the laptop itself using the built in TV tuner and the Antenna adapter supplied with the Qosmio,using no other equipment.
I have launch media centre/settings/current region=Ireland/cable or digital selected/analogue terrestrial pal/secam selected/No selected to "Do i have a set top box?",then i return to Tv settings as there is no Guide listings for Ireland.
I then scan for services. Thirty seven services found all in Black and White and some quite fuzzy. Hope this will narrow things down,i cant figure it.
Thanks for help.

I cant get the black and white apple screen off

every time its not being used or chraged, it goes to a black and white screen with an apple on it.
its not at hold and it is responding but how do i get it off of the screen?
its not working for me at all.
oh... and when ever i try to update my ipod, it never works.
only when i have the cd in there, and i redownload it.
is there any way to skip around any of these steps?
because i really dont want to go through the complicated prosses of downloading the softwear every time the softwear refuses to work.
if you can contact me at my screen name
aim = aheaheahe X core
thanks.
-christan
nano

Welcome to Apple Discussions!
Try these...
iPod Only Shows An Apple Logo and Will Not Start Up
iPod Only Shows An Apple Logo
Or, is something else happening?
btabz

I can not print black and white only documents and I have a full black ink cartridge

I have been an loyal HP customer since the orginal laserjet in the early 90s and then many inkjets from HP after that.
I bought an HP 6600 All in one for the house and have only ever printed in black and white.
For some reason one of the color ink carts is empty after a few months of black and white only printing.   No problem - I only print in black and white - or so I thought.
Nothing I have been able to do (aside from buying a color cart I don't need) is able to tell the printer to not worry about color and only use the black and white cart. Past inkjets from HP didn't have a problem with this.
Please tell me HP didn't do this on purpose and is going to trying and justify the need for me to buy any color carts if I never print in color. HP - if you did and you are going to try and tell me you neeeded to do this for any reason then someone please sign me up for the class action lawsuit if you are an attorney looking for plaintiffs.
However, I am sure I am overlooking some simple setting on the 6600 to move past this annoyance.
Thanks!

Hi Atlanta90210,
We appreciate your brand loyalty, and I'm very sorry for the frustration this has caused.
There is a lot of good information in Cannot Print When One of the HP Ink Cartridges is Empty. It explains how your printer works and how it is designed. Another good resource is posted here.
In the first link I mentioned, there are steps to print with black ink only. I have a similar printer to this at home (with the same print mech), and I have found that the steps to print with black ink only have saved me lots of ink.
There needs to be ink in all the cartridges for this printer to continue printing (after the cartridge's reserve mode is depleted). Once you have replaced the empty cartridges, you can change the print settings to print with only black ink so the printer doesn't use color ink. Until then, there is not a way to bypass this.
I know this is not the answer you were hoping to receive, but I do hope it was helpful.
I'd be happy to help you with any other questions or concerns.
-- ReverseTalk
I work on behalf of HP.
Click the thumbs up + button if I have helped you. Mark Accepted Solution if I solved your inquiry.

RGB Only Prints in Black and White

My Illustrator CS3 seems to have developed a strange problem. If I create a new RGB based document, a 'Web Document' or a 'Basic RGB Document' for example, and the print it, I only get a black and white print. If I create a CMYK based document it prints just fine. I have also tried creating a CMYK document and converting it to RGB and that prints fine too, but if I create an RGB document and convert to CMYK again I get a black and white print.
I have checked each of the colour profile and print dialog boxes to see if there are any differences bewteen a RGB sourced document and a CMYK sourced document but can't see anything obvious. This problem seems to have developed over the past couple of weeks as it used to print RGB without a problem.
Any help would be much appreciated as I've been going round in circles with this for hours. I should perhaps add that I'm no Illustrator expert!
Thanks.

I have found a solution to the problem by installing and using the PCL 6.0 driver instead of the PostScript driver (interestingly the PostScript driver is recommended by Xerox).
I am guessing that there must be a small error/discrepancy in the Xerox PostScript driver as it works fine in all other applications and indeed even in Illustrator with everything but RGB colour mode.
This also stacks up against the way the problem materialised as it seems that the error is only apparent in the latest driver, the previous driver (as shipped on CD with the printer) works correctly (it was updated by a Microsoft Update Patch originally).
It would be nice to raise this problem with Adobe and Xerox, but I wouldn't know where to start, so I'll stick with the PCL driver.

Print black and white only, on Hp photosmart 5514.

Hi,
I dont like it at all that i have to contact support forums for something like this.
it use to be so easy to choose color or black and white printing.
Why have you made it so difficult ? Totally pisses me off but i leave that for the feedback section.
I have seen others with the same problem so it is not only me. now it has taken more than 20 minutes and i have to get to work soon.
So, how do I print black and white (or greyscale) using my newly bought hp photosmart 5514 ? ( is it smart ???)
I have been wasting a lot of ink now, very unsmooth not having it available in the ordinary printing window.
Like it matters, i use win 7 blablabla

I also hate that there is NO WHERE to find a simple answer. I have a "HUGE" XL cartridge of black only. Then I have to buy all the stupid little tiny color cartridges AND another little black cartridge.
Here I suppose: when I print in color, I use the color + small black cartridge.
When I want to print BLACK ONLY or GRAYSCALE, I choose that and it only prints using the XL big black cartridge.
WRONG. And no one can seem to answer this correctly, t but I know it does not work.
Remove 1 empty color cartridge whole printer won't work, even if I want black print only.
If all the small "color" cartridges + small blk cartridge is low but the BIG BLACK cartridge is showing full, still won't print BLACK ONLY.
I cannot PRINT with this stupid printer unless all cartridges have ink and are inserted. STUPID
I am now late to work simply because I cannot print a document PERIOD unless I have full color sitting there.
I just tried it multiple ways, grayscale, black only blah blah and it ALWAYS came out too- light, ie the sm blk cartridge was being used and it is admittedly LOW ON INK. WHAT is the big black cartridge doing there, saying it is full and not printing "black only" or "grayscale"?
The only article I could find that halfway enlioghtened me to the problem was HP page stating that "black" is never really black, to improve quality (thanks for making the decision for me) HP adds just a bit of color here and there to make black really black for paper quality paper.
SO SNARLING. Going to *bay to get refilled cartridges so I can print in a week. SNARL

Going black and white

Similar Messages

Maybe you are looking for