Going from 30GB to 80GB

Folks, I'm thinking of going from my 30GB Video to one of the new 80GB. Not worried about the cost, but more concerned about how easy and upgrade would be ... is it as simply as plugging the new one into the computer and having my tunes library sent to the new device? Thanks in advance for any/all advice!
Greg
Dell XPS 600   Windows XP  

Follow the instructions in this article if you want to erase everything from the iPod; plugging the iPod into a new computer and then changing the computer it is linked to will erase music, photos, and videos from it, but won't affect other content, such as notes and data.
(21027)

Similar Messages

  • I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb.  The problem I'm having is that it will not more than about 5.4gb worth of songs.  The iPod begins to freeze mid sync and the (-69) error message haults the sync.

    I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb.  The problem I'm having is that it will not sync more than about 5.4gb worth of songs.  The iPod begins to freeze mid sync and the (-69) error message haults the sync process.  The hard drive has been upgraded, it has a new logicboard (with 128mb RAM), new housing, battery, hold / headphone jack.  Basically the only original parts are the bezel, click wheel, screen, and data ribbons. Have attempted the 3Rs and have also tried to isolate potentially corrupt audio files and remove them, but this did not seem to be the primary cause.  The sync failure consistently happens at just under a 1000 songs (5.4gb) and then it starts to error (-69) any song after that.  Your advise would be enthusiastically received.

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Going from 256GB to 80GB SSD

    Hello,
    I'm going from my 256GB to an 80GB SSD, and I'll use an external for my file store. When I restore using time machine, do I have the option to pick and choose what I want to restore?

    Hi, and welcome to the forums.
    That depends on what you want to do. You have 4 options:
    Restore your entire system to the exact state it was in at the time of any backup. See #14 in the Frequently Asked Questions *User Tip,* also at the top of this forum.
    Install OSX, then restore your settings, apps, users, and/or data via +Setup Assistant.+ See #19 in the FAQ Tip. Then download and install the "combo" update to get back to 10.5.8. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.
    Install OSX, set up one user and install the "combo" as above. Then use +Migration Assistant,+ per this Apple article: http://support.apple.com/kb/HT3322
    Install OSX, set up one user and install the "combo" as above, then restore selected items from Time Machine. See #15 in the FAQ tip.
    Without knowing just what you want to do, we can only advise that usually your best bet is to do the full system restore, then delete anything you don't want, rather than trying to pick and choose what you do want, especially with applications.

  • Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  What's wrong and how do I fix it?  Help!

    Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  Tried it 10 times with the same result.  What's wrong and how do I fix it?  Help!

        Oh no Mr.Ected!
    I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
    AmberF_VZW
    Follow us on Twitter @VZWSupport

  • Going from iphone 4s to 6 want to know if i can save and or tran my voicemails and voice memos to put on my new phone

    going from 4s to 6 can I save my favorite voice mails and voice memos to put on my new phone via pc or cloud

    If you are planning to set up your iPhone 6 by restoring the iCloud backup from the iPhone 4s, your Visual Voice Mails and Voice Memos will be restored.

  • IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

    After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
    Does anyone have a solution or suggestion?
    Thanks

    After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
    Does anyone have a solution or suggestion?
    Thanks

  • Data not going from active data table to new data table -DSO activation iss

    Hi Experts,
    Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
    There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
    Apart from that..to  DSO 2 there are 4 other DSO sending data.
    I tried to send single record and saw that data is going

    Hi Experts,
    Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
    There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
    Apart from that..to  DSO 2 there are 4 other DSO sending data.
    I tried to send single record and saw that data is going to New data table and upon activation it does not go to Active data table.
    Please suggest.
    Regards
    Sudha

  • My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?

    My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?
    Please help me out as this is very irritating. This has been happening for the last 20-30 minutes. It had roughly half battery left.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Blue screen of death, and continous reboot.  Phone never actually boots up, just keeps going from reboot to blue screen and back again.  Any suggestion?

    Blue screen of death, and continous reboot.  Phone never actually boots up, just keeps going from reboot to blue screen and back again.  Any suggestion?

    Hello jared1915
    If you are stuck in that loop, the next step would be to restore your iPhone. Check out the article below to get your iPhone into recovery-mode and restore it in iTunes.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • HT4623 The software update option is not on my phone.  It just goes from "about" to "usage".  I have an iPhone 3G.  Every time I try to update it on iTunes, nothing changes.  I have version 4.2.1, no matter what I do.  Any suggestions?

    I have an iPhone 3G, and cannot update my iOS.  In the General tab, "Upadate Software" is not even there.  It just goes from "About" to "Usage".  When I try to update on iTunes, it always remains the same.  iOS 4.2.1.  Any suggestions?  (My PC uses Windows XP).   Also, my WiFi has completely quit working.  Works fine on the other iPhones in the house, as well as the XBox 360, so I am sure it's my phone.  I tried everything I could think of, including restoring the iphone to factory settings & then updating, but no luck.  Thank you! for any help you can give!  I plan to get an iPhone 5, but wasn't ready to do it quite yet.  Hopefully my phone can be rescued until I'm ready.

    That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed).  Version 4.2.1 marks the end of your updates for that device.

  • Which hard drives can I put in my 120gb ipod classic? 30gb, 60gb, 80gb or only a 120gb?

    which hard drives can I put in my 120gb ipod classic? 30gb, 60gb, 80gb or only a 120gb?

    Physically, the small capacity hardisk (60,80) are thicker at 8mm,
    while the 120gb is thinner at 5mm,
    there are some thin hardrive 30 GB (MK3006GAL), 60GB (MK6015GAL) and 80GB (MK8022GAA).
    The firmware 2.0 should be able to handle upto 160GB.hardrive.
    However the difficulty, is opening the iPod case, and getting the thin hardrive or else your iPod case wont close, better stick to 120GB.

  • I had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes.  when i connect my c even if i'm going from a 4 to a 5s?

    i had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes.  when i connect to itunes, does it automatically sync / backup even if i'm going from a 4 w/IOS 6 to a 5S w/IOS 7?

    Welcome to the Apple Community.
    Yes you can probably delete the 2 incomplete back ups they are unlikely to work.
    However, I'd be inclined to back up to a computer as well and restore from there, if you are changing your phone.

  • How do I transfer all my Firefox saved passwords to my new hard drive and operating system? Going from xp to windows 7.

    How do I transfer all my Firefox saved passwords to my new hard drive and operating system? Going from xp to windows 7. I have the old hard drive hooked up as drive f. Can I copy and paste from old drive directory to new drive directory?

    You need to copy 2 files, key3.db and signons.sqlite, from the old [[profiles|profile folder]] to the profile folder on the new computer.

  • I just jazzed up my 2 Ghz iMac with 10.6.8, and 4 gigs of memory. I'm VERY happy with the results (fast!), but now I have a thin yellow line way over on the right side of the screen, which goes from top to bottom. This is really strange! Any input?

    I'm VERY happy with the results (fast!). However, the really strange thing is this - there is now a thin yellow line, way over on the right side of the screen, which goes from top to bottom, and stays there no matter where I go or what I do. I've never seen anything like this! It was not there before I did the upgrades. Anyone out there ever heard of such a preposterous thing ~ or have any ideas on how to get rid of it?

    Hello Mark,
    It's going to mean a lot of reading but you should study the 'More like this' legend to your post's immediate right.  >>>>>>>>   plus some of the links within each.
    The problem is well explored with much guidance on what to do and where to go.

  • My apple tv keeps losing internet connection. I'm going from modem to airport and from airport to apple tv. I've replaced the modem and the apple tv and it still does it. Internet to my laptop via the airport wifi is fine and never drops out.

    I keep having to restart it every time I want to use it. Sometimes I have to restart it multiple times. The cord goes from the cable modem to the airport and then from the airport to the apple tv. I've replaced the apple TV and I've replaced the modem and the problem persists. I assume it has to be the aiport? But the wifi from the airport works fine.
    I tried bypassing the airport and going straight from the modem to the apple tv and it wouldn't work. That makes no sense to me.
    I had a friend over to try and figure it out and he couldn't. Any idea what could be the problem??

    The Ethernet cable from the modem should be connected to the AirPort's WAN (circle of dots) port and a second Ethernet cable should be connected between the AirPort's LAN (opposing arrows) port and the Ethernet port on the Apple TV. Is this the case?
    If so, what is the make & model of the modem that the AirPort is connected to. Also what is the exact model of both the AirPort and the Apple TV?

Maybe you are looking for

  • Usage of exists in if-then-else statements

    please correct the mistakes in this procedure regarding exists in the use of if then else statement .as i am new to oracle i am unable to do it. errors are statement ignored exists should be inside the statement; CREATE or replace FUNCTION CHECK_FG_I

  • Lost Boot Drive

    Dual G5 locked up with 2 or 3 apps open and runniing. I turned off the power via the switch on the front and booted back up. The chime goes, the grey screen comes up and the osx window loads and then goes to plain blue screen (not Aqua which is defau

  • Help regarding Actionable Email in SOA Suite 11g

    Hi, I am working on a requirement wherein there are 2 approver's in a serial flow. These 2 approver's need to approve or reject the payload by accessing their emails instead of going to the BPM Worklist. My problem is that the 1st approver gets the p

  • HT1420 troubleshout with authorizing

    I have problem with authorization of de itune store, i get constantly a message that i hav to authorize my PC but after filling the acount information it does not work. Is there any other solution?

  • How to clear non-stateless incident ?

    Any option I may clear those incidents 'not' stateless incident or purging policy I may use for 'OPEN' incident ? For example, I would like to clear the incident already marked 'resolved' like '/u01 available space less than 7%'. ' listener response