Going from Configurator to MDM

My school just purchased a MDM to help manage our iPads. For the past year I was using configurator to manage and add apps. Am I going to be able to still use those already redeemed codes when comes to pushing apps or am I still going to have to "touch" each iPad to add already redeemed codes?  

Perhaps this can help answer your questions.....
http://www.apple.com/education/it/

Similar Messages

  • SRM MDM Catalog - Transfer Contracts from SRM - XI - MDM

    Hi,
    We are implementing SRM MDM Catalog1.0 with SRM 5.0 & ECC 6.0.
    We have already configured XI content for MDM Catalog.
    We have also done the basic settings for transferring contracts from srm to XI (including Backend System & Check box in Contracts for transfer to catalog).
    But when i run the report SRMMDM_CTR_TRANSFER, the log tells me that contracts transfer has been initialized, but I cant see any XML message in SXMB_MONI
    Can someone pls help and tell me why is that happening??
    Thanks in advance.
    Regards,
    Jasmeet

    Hi Mausam,
    yes we have a SRM system from which we want are going to be sending Contracts, Prod Id's, Product Categories, Suppliers List etc from SRM to MDM using XI.
    We have the Pre delivered content for XI from which we have set up the Interfaces etc.
    This mapping between SRM-XI-MDM works pretty fine if i try to send Products or suppliers from SRM. I can see the IDOCs being generated. But when i run the report for Contracts, I cant see any IDOC in SXMB_MONI in SRM which is my source system.
    So hence my question..... Is there some other way by which Contracts are transferred and if so then how and where can I see it.
    Regards,
    Jasmeet

  • SMD Configuration on MDM 7.1 with Solution Manager 7.01 SP19

    Hi,
    Kindly let me know if someone has faced issue with configuring SMD on SMD 7.1 with Solution Manager 7.01 SP19. Presently I have configured that and System is being shown in Wily Introscope Webview but Saposcol is greyed out in that.
    Also system is not showing any data in Introscope Dashboard. Any guess for this?
    Earlier while I was configuring SMD, error related to null installation directory (...Invalid root directory: /usr/sap/SID/null ) were occuring. After that when I created a softlink for saposcol service from /usr/sap/hostctrl/exe/saposcol to /usr/sap/SMD/SMDA97/exe.
    Still no data and still in SMD Agent logs saposcol service warning is there.
    Thanks & Regards,
    Manish Singh

    Hi Jansi,
    Thanks for the reply..
    Here is our scenario. SAPOSCOL was not there in /usr/sap/SMD/SMDA97/exe first place. So I made the softlink from /usr/sap/hostctrl/exe/saposcol to /usr/sap/SMD/SMDA97/exe and than re-ran setup again but still of no use.
    Our Soltuion Manager saposcol version and MDM saposcol version is same. Below is the SMD Agent log of MDM server:
    Apr 20, 2011 2:36:19 PM [Thread[Thread-22,5,main]] Error      com.sap.smd.wily.hostagent.config.AgentConfigVO - finalizeDestination(): Initialization failed
    [EXCEPTION]
    com.sap.smd.wily.hostagent.PermanentException: Error: cannot connect to destination SapHostControl_Default. Probably saphostctrl is not installed. This error can be ignored if saposcol is available.
    at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:98)
    at com.sap.smd.wily.hostagent.config.AgentConfigVO.finalizeDestination(AgentConfigVO.java:85)
    at com.sap.smd.wily.hostagent.config.AgentConfigXmlHandler.endElement(AgentConfigXmlHandler.java:174)
    at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:156)
    at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1953)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1846)
    at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2442)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1843)
    at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2845)
    at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:165)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
    at com.sap.engine.lib.xml.parser.Parser.parse_DTDValidation(Parser.java:260)
    at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:271)
    at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
    at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
    at com.sap.smd.wily.hostagent.config.AgentConfigParser.parseXml(AgentConfigParser.java:59)
    at com.sap.smd.wily.hostagent.SapAgent.loadConfiguration(SapAgent.java:430)
    at com.sap.smd.wily.hostagent.SapAgent.start(SapAgent.java:93)
    at com.sap.smd.wily.hostagent.WilyHostService.startAgent(WilyHostService.java:118)
    at com.sap.smd.wily.hostagent.WilyHostServicep4_Skel.dispatch(WilyHostServicep4_Skel.java:168)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
    at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:721)
    at java.lang.Thread.run(Thread.java:664)
    Caused by: javax.xml.rpc.soap.SOAPFaultException: Method 'SOAP-ENV:Envelope' not implemented: method name or namespace not recognized
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.buildFaultException(MimeHttpBinding.java:747)
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.processDocumentFault(MimeHttpBinding.java:870)
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1451)
    at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:142)
    at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:157)
    at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:94)
    ... 25 more
    Apr 20, 2011 2:36:19 PM [Thread[Thread-22,5,main]] Warning    com.sap.smd.wily.hostagent.SapAgent - startActions(): Action SAPOsColWs
    [EXCEPTION]
    com.sap.smd.wily.hostagent.TransientException: Destination not available:SapHostControl_Default
    at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlAction.init(SapHostControlAction.java:74)
    at com.sap.smd.wily.hostagent.SapAgent.startActions(SapAgent.java:396)
    at com.sap.smd.wily.hostagent.SapAgent.start(SapAgent.java:94)
    at com.sap.smd.wily.hostagent.WilyHostService.startAgent(WilyHostService.java:118)
    at com.sap.smd.wily.hostagent.WilyHostServicep4_Skel.dispatch(WilyHostServicep4_Skel.java:168)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
    at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:721)
    at java.lang.Thread.run(Thread.java:664)
    Apr 20, 2011 2:36:20 PM [Thread[Thread-22,5,main]] Warning    com.sap.smd.wily.hostagent.action.SapOsColAction - launchDaemon(): saposcol exited with 255***********************************************************************
    This is Saposcol Version COLL 21.01 711 - AIX v12.01 5L-64 bit 090324
    Usage:  saposcol -l: Start OS Collector
            saposcol -k: Stop  OS Collector
            saposcol -d: OS Collector Dialog Mode
            saposcol -s: OS Collector Status
    The OS Collector (PID 1552388) is already running .....
    Apr 20, 2011 2:36:23 PM [Thread[SAPOsCol,5,main]] Error      com.sap.smd.wily.hostagent.action.AbstractAction - run(): Action throws exception, will be terminated: SAPOsCol
    [EXCEPTION]
    java.lang.NullPointerException:
    at com.sap.smd.wily.hostagent.action.SapOsColAction.reportProperty(SapOsColAction.java:293)
    at com.sap.smd.wily.hostagent.action.SapOsColAction.dumpSection(SapOsColAction.java:239)
    at com.sap.smd.wily.hostagent.action.SapOsColAction.processXml(SapOsColAction.java:164)
    at com.sap.smd.wily.hostagent.action.SapOsColAction.doRun(SapOsColAction.java:417)
    at com.sap.smd.wily.hostagent.action.AbstractAction.run(AbstractAction.java:53)
    at com.wily.EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:728)
    at java.lang.Thread.run(Thread.java:664)
    Our MDM is 7.1 version and Solution Manager is 7.01 (EHP1) with SP19 so we should configure our MDM system as 7.1 version which we did but still data is not coming in Wily properly. Its not showing SID name under the hostname in Wily Introscope and neither is MDM Servers (Master Data Import Server, Master Data Server & Master Data Syndication Server under SID).
    Now the interesting thing is that if we configure our MDM server as 5.5 version with Solution Manager and do the configuration than its showing in Wily but in that case MDM Cockpit doesn't work.
    We want both to work Wily as welll as MDM Cockpit since our MDM and Solman version matches for both configuration.
    Any ides or help steps to do that?
    Thanks,
    Manish Singh

  • Extraction of Business Partner data from CRM to MDM

    Does MDM provide standard extractors that can be installed in CRM so that BP data can be extracted and sent to XI via IDOC.
    If it does where can I find this information ?

    have a look at the MDM IT scenario Configuration Guide: https://websmp110.sap-ag.de/~sapidb/011000358700004656452006E
    This document describes how you setup bupa data extraction from CRM to MDM, which is actually done via Proxies and not via IDocs.
    Regards
    Christine

  • Replicating Products/Catalog from SRM to MDM

    I am implimenting SRM and MDM on 7.1 and SRM-MDM Catalog 3.0
    I wanted to replicate catalog data from SRM. As we know each catalog record in MDM contains Product, Supplier, Info record data. I am not sure if we have to map all these in MDM or It will be mapped by SAP delivered content for replication.
    I am using BBP_CCM_TRANSFER transaction in SRM to transfer data to MDM. In the selection screen I am using 'Category Hierarchy', Category ID and Language fields. I did unchek/check Force Intial Transport and P_debug. There was not much difference.
    However I am getting following info messages, but unable to see any data in MDM
    16.06.2010 09:27:41: Initial transfer for catalog SRM_EXTRACTED_CTLG
    16.06.2010 09:27:42: Determine category TELEPHONE (5 products)
    16.06.2010 09:27:42: Start of catalog transfer for 1
    16.06.2010 09:27:42: catalog transfer ended
    I am now stuck here. Can any one share details of the replication process and steps involved.

    Hi Sudha,
    Please explain your business scenario. What data you want to replicate from SRM to MDM. We can replicate Suppliers, Contracts and Product Master from SRM to MDM through XI. Make sure you hae configured XI settings for that. You have to download the pre-delivered XI content from SAP Markeplace. Please check Note # 1177779 & 1177780 regarding that.
    We can use following reports in SRM to replicate following data in MDM
    BBP_CCM_Transfer_Catalog-----Product master
    ROS_SUPPLIER_SEND_TO_CATALOG-----Supplier data
    SRMMDM_CTR_Transfer----Contract data from SRM
    In your case, you are running BBP_CCM_TRANSFER. Please check the SXMB_MONI t-code to monitor the XML messages whether XML files are processing correctly or getting stuck.
    Thanks,
    Anshuk Saxena

  • Replicate Non-standard lookup data from R3 to MDM

    Hi MDM Experts,
    I am having a scenario like i want to replicate the reference data(Lookup table data) from R3 System to MDM System.
    For that i can use the transaction "MDMGX" but in this we can replicate for standard lookup table data which has been shipped by SAP in R3 on the basis of object types like article, product, catalog etc....
    I want to replicate the look up table data which is not standard one.
    I just want to know that what all the possible ways so that I can customize the same and would be able to replicate the lookup table data from R3 to MDM.
    Any help would be highly appriciated.
    Thanks,
    Saurabh..

    Hi Deepankar,
    I'm sorry to correct you, but MDMGX does not send IDocs to MDM. MDMGX provides the customizing data in XML format. You can configure MDMGX either to send the XMLs directly to MDM's port folders via FTP or to download those files locally on your PC. MDMGX is only capable to extract customizing data for master data objects but not the object itsself.
    The output of MDM_CLNT_EXTR depends on the system it is running in. R/3 (ERP) systems use IDocs for message distribution via the systems ALE layer. These can be DEMDM, CREMDM, MATMAS, and so on if you use the standard SAP content, or any other customer defined IDoc type. These IDocs have usually an XML format, but they are not really XML documents. The transformation from IDoc to XML usually happens on XI.
    It' a bit different if you extract data from CRM or SRM systems. Those systems use an integrated Proxy implementation for message distribution. The messages sent to XI (or MDM) are already real XMLs.
    Additionally pleas enote that MDM_CLNT_EXTR is intended to be used for the extraction of Master Data Objects and not the related customizing data!
    BR Michael

  • How to Export Materials from ERP to MDM 7.1 via MDMGX?

    Hello MDM-Experts,
    as described in the Scenario Configuration Guide for MDM 7.1, we want to initialize our MDM repository with reference data (material) using XML-Files. Therefore, we have imported the fiel "71110_MATERIAL.a2a" in our repository. Now we want to fill it with the materials from out ERP-System without using PI/Xi.
    We tested the transaction MDMGX in our ERP-System and are able to extract products and articles, but not materials (table mara). We also checked the document "How to configure MDM Reference Data Extraction", but found no solution for material. Could anyoune help?
    Thanks & best regards
    Matthias

    Hi Matthias,
    we recommend using PI as we have some XSLT mappings running on PI that you cannot use (easily) w/o PI. Additionally PI takes care of the correct routing from ERP to MDM.
    Nevertheless a possible (but not recommended) way w/o PI would be via ALE and XML files. You can configure an ALE port in a way that it creates an XML file using the IDoc structure (see [SAP Help|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/3f/faa288bb7911d2897f0000e8216438/content.htm]. ALE then places the file in the file directory of the application server instead of sending it via the IDoc Adapter to PI.
    Best regards
    Michael

  • Going From G4s to Duo 2 Core Questions

    I'm going from 2 G4's to Duo 2 Cores (shipment to arrive early next week). Three questions to those who have already done it, to avoid problems:
    1) I will import my data from the G4s to the new Macs via Target Disk Mode (no Migration to avoid bringing something over that might muck up the works).
    Which computer should I boot into Target Disk Mode - the source (G4) or destination (Duo 2 Core)?
    Should I boot into Target Disk Mode and then firewire connect, or firewire connect and then boot into TDM?
    2) I currently use Office X (Word and Entourage) as my data staple; am upgrading with the purchase of the Duo 2 Cores to Office 2004.
    How do I get my Office X Word and Entourage preferences (Normal Template; Address Book, etc) into Office 2004 once 2004 is loaded? Should I install the 2004 appliication onto the Duo 2 Cores, then copy over my Microsoft User Date from Office X (from the G4's to the new computers), then launch Office 2004 on the new computers and somehow import my prefernces; if so, how? If not, what's the best procedure?
    3) I use Firefox as my main browser. I do a lot of public records research. Most public records are in PDF format. I currently use the PDF Browser Plug-in (private edition) for viewing. Is that a safe option for Intel Macs? If not, any alternatives suggested?
    Lots of questions, but thanks in advance for any input and assistance!
    Any other suggestions on a smooth transition will also be most appreciated!
    Again - Thanks and Cheers!
    iMac Flat Panel Mac OS X (10.4.8)
    iMac CDRW

    1) I connected my new MacBook to my turned of PowerBook while the MacBook was on. Then I turned on the PowerBook booting into FireWire Target Disk Mode. BTW, I copied Library folder from my PowerBook onto the MacBook's desktop. The rest I just copied directly into my new MacBook personal directory. IOW I opened up both Document folders and copied from PowerBook to MacBook. I was more careful about what I copied from the old Library folder and I did just a little at a time so if trouble developed I could remember what I'd just copied in and remove it. This minimized the number of programs I had to reserialize and configure.
    2) This is a good question - I bought MacOffice and used it with the PowerBook. I don't remember the process of moving in - whether it was done automatically or whether I was prompted for where to import files from. I just remember it being pretty painless. Perhaps the safest method would be to install Office on the old G4 first and get it all sorted out there first.
    3) There's an Intel updated version of the plug-in available - I'm using it.

  • ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs

    ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs. Setting up the connection has been a hit and miss. Have tried both x86 and x64. Any ideas?  Use ODBC from the control panel and C:\Windows\SysWOW64 same results. Using
    SQLexpress 2008r2
    Thanks

    Hello,
    Please consider to configure Windows Firewall or disable it. Not only Windows Firewall but any security software.
    https://msdn.microsoft.com/en-us/library/cc646023(v=sql.120).aspx
    Windows Firewall is enabled by default.  
    Make sure you are using SQL Server Native Client to create the ODBC DSN. Not all Windows versions have it, so you may need to download and install it.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Can I export unused VPP codes from Configurator?

    We have "unsupervised" many iPads that had previously had Pages and Keynote loaded (we imported the VPP codes to Configurator)
    Can I "remove" the codes from Configurator to distribute them differently? When I sign in to VPP the codes are all "redeemed".

    To the best of my knowledge, once you import an Excel spreadsheet of VPP codes into Configurator those codes can only be used on that computer. You can install or remove apps from iPads and reallocate apps on that computer but can't take the codes out of Configurator to use them in another instance of Configurator or in an MDM for redistribution.
    The exception would be if you wanted to migrate from redemption codes to managed distribution in which case unredeemed codes or codes redeemed through Apple Configurator could be changed to managed distribution licenses. See http://support.apple.com/kb/HT6015 for details on this process.
    Hope this helps!
    ~Joe

  • Time Capsule Intermittently goes from full bar strength to none

    Hello!
    My question is similar to this thread: http://tinyurl.com/5qk7uk
    I have noticed that when I power on and logon to my Mac, my wifi connection goes from full bar strength to none. I turn off airport, then back on, to restore my full speed. It will also sometimes do this throughout the day but it seems very sporadic and I can't link it to any event. Any advice?
    Thanks

    I have set-up a dual band network, with a TC at "2.4 ghz n" and an old Airport "g" connected by eNet to the TC. The two devices are next to each other on the top bookshelf of my office. In the family room, approximately 40' away and slightly lower (5 steps) I have an Express configured to extend the "g" network. We use our MacBook Pros in the family room, hers at "g" mine at "n". There is also an TV in the family room. Here are the questions:
    1. Will proximity of the "n" TC and the Airport "g" affect transmission speed?
    2. Should the AX (extender) and the Airport be set to operate on the same channel, or different, or does it matter.
    Thanks.

  • Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  What's wrong and how do I fix it?  Help!

    Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  Tried it 10 times with the same result.  What's wrong and how do I fix it?  Help!

        Oh no Mr.Ected!
    I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
    AmberF_VZW
    Follow us on Twitter @VZWSupport

  • Going from iphone 4s to 6 want to know if i can save and or tran my voicemails and voice memos to put on my new phone

    going from 4s to 6 can I save my favorite voice mails and voice memos to put on my new phone via pc or cloud

    If you are planning to set up your iPhone 6 by restoring the iCloud backup from the iPhone 4s, your Visual Voice Mails and Voice Memos will be restored.

  • IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

    After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
    Does anyone have a solution or suggestion?
    Thanks

    After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
    Does anyone have a solution or suggestion?
    Thanks

  • Data not going from active data table to new data table -DSO activation iss

    Hi Experts,
    Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
    There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
    Apart from that..to  DSO 2 there are 4 other DSO sending data.
    I tried to send single record and saw that data is going

    Hi Experts,
    Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
    There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
    Apart from that..to  DSO 2 there are 4 other DSO sending data.
    I tried to send single record and saw that data is going to New data table and upon activation it does not go to Active data table.
    Please suggest.
    Regards
    Sudha

Maybe you are looking for

  • COPA - Value Field - Assignment to a G/L account

    Dear All, Could anyone kindly let us know what the relationship between the COPA value fields and G/L.??? (We do not use Sales and Distrubution module in our company) Thank you Very much Gayani Moderator: Please, search SDN

  • [svn:cairngorm3:] 16825: * upgrade to flexmojos 3.7.1

    Revision: 16825 Revision: 16825 Author:   [email protected] Date:     2010-07-07 01:05:58 -0700 (Wed, 07 Jul 2010) Log Message: upgrade to flexmojos 3.7.1 ignore snapshot checksum from springas repository Modified Paths:     cairngorm3/trunk/build-pa

  • Problems in Windows 10 Technical Preview build 10049

    Start menu not working Cortana not working can not use apps What are the solution for these problems? M I the only one who is facing these problems??

  • Siri can't find places in canada

    When I ask Siri to find places, for example restaurants,it tells me it can't find places in Canada- is this just a setting issue?

  • IPod skips songs for no reason

    My ipod skips songs and I do not know why or how to stop it. I have several playlists and it does it on all of them. I've deleted all the songs and re-installed them and have reset the ipod several times and this has not helped. Can anyone help me?