Going from LR2 to CS3 editing

Hi.
I can't seem to find any logic in the following: sometimes, when I want to go from Lightroom to Photoshop/CS3 for further editing, I'm being asked if I want to work on the original or on a copy. Sometimes I'm not. Most of the time I DO want to work on a copy, but I'm not promted to begin with. Why is this so?
rgds,
olek

If you are working on a TIFF, PSD or JPEG, you get the dlog to allow you to decide what option you want. If you open raw files, you DON'T get the dlog because since the raw file is considered a read only file, all you CAN to is open a copy.

Similar Messages

Going from CS4 to CS3

Greetings,
Once you've created a composition in a CS4 version of a program such as After Effects, are you able to open the comp in the CS3 version?
I know this problem arises with Adobe Audition when going from Audition 3 to any prior version, and I'm looking to go back to CS3 from CS4 (far too many bugs and I'm finding it far too unstable)
Thanks,
Sarah

You can copy keyframes manually if you have both versions installed on the same computer:
i http://generalspecialist.com/2007/10/opening-after-effects-projects-in.asp
- Jonas Hummelstrand
http://generalspecialist.com/

Loosing page setup going from V10 to CS3.

When I try to open pages created in Illustrator 10 into CS3 they not only loose their page size and orientation but the page set up dialog box is not even available to change it. I have tried restarting both the printer, re-selecting the printer.
It's a HP 2500n color laser with the latest driver software.
Thanks.

When you have a dhcp address, use ifconfig to identify the address, broadcast address, and subnet mask, and use route to identify your default gateway. All these should be added to the rc.conf NETWORKING section - an example is provided. Make a note of the nameserver address that was automatically added to /etc/resolv.conf under dhcp - it should remain there.
Before you do all that, you may have the option of using a dhcp fixed lease instead i.e. continue to use dhcp, but configure it to provide the same address to your arch box every time. That would depend on the capabilities of the system that provides the dhcp service.

Upgrading from cs1 to cs3

Hi, I'm currently using cs1 on my imac (running Tiger). Should I upgrade to cs2 then to cs3 or do I have to buy the full version of cs3? If so, will I have problems opening files going from cs1 to cs3?? I'm confused! Thanks!

Dov,
When upgrading from CS to CS3, I would like to add the Web editing tools. Which upgrade package is best to get? I especially need Flash & Dreamweaver. I noticed that there is no InDesign in that package. I do print and Web design so I need it all.
Thanks,
CK

Acrobat X Pro no longer edits pdf's after doing clean install going from 10.9 to 10.10 on mac.

all other suite programs seem to work just fine. Just not Acrobat X. Was install from upgrade serials numbers. Acrobat X does not work well using Yosemite for me.....

I am not able to edit scanned documents that once could. They were scanned in as PDF files. The files that I once could edit in Acrobat x Pro are no longer editable. Past PDF's that I used change dates and resend no work. I did a clean install going from maverick 10.9 to yosemite 10.10 due to an issue with third party program. Since the clean install I have not been able to see or work on older adobe files that I once could. Everything that had a adobe icon attach to it has disappeared and been replaced with an apple pdf icon. It will not let me select areas as I once could to even copy and paste.
Thanks-

Printing from CS3 after export from LR2 (Mac OS X) blurry / undersaturated

Hi all,
New to the forum and it might be with a question which already has been answered but I really could not find it, so here's my try.
Recently bought a Canon 50D and Pixma 4600 and started shooting pics (RAW) of my newborn kid. After importing and basic processing (WB, exposure, noise) in LR I exported pics to CS3 in various ways (TIFF 16 bit, DNG, Original file, different DPI, up to 500 etc.) and did some detail work over there.
After printing from CS3 all pictures look slightly blurry, undersaturated and underlit. Did a lot of trying on all settings (IP4600 profile from CS3, saturated, relative. etc. etc.) and when finally comparing identical pics printed from LR and CS3, the detail and overall quality of the LR pics is much better.
Any help would be greatly welcome as I cannot imagine being the first one with this problem and because I am convinced that it should be possible to print very accurate and brilliant images from CS3.
Overview of equipment :
Canon 50D
Imac 20", 2.4 GHz 4 Gig memory
Pixma IP4600
LR 2.1
CS3
Thank you all for your help, understanding and kindness,
Michiel

I'm just going to say "wow", because this worked for me. I was ready to chuck the printer out the window since I've tried virtually everything in every other single thread here, and nothing has worked. I had my doubts about d/ling the European driver, but it completely worked.Thank you!!
Link that worked for me: http://esupport.epson-europe.com/ProductHome.aspx?lng=en-GB&data=zbff+oTjl0HU002FfEVcqCDa8 Tb+0FXpIU002FFritF2NBao5eIU003D&tc=6#35

Upgrade from CS2 to CS3? (for Windows XP)

Hi, guys. I'm new here. And I only signed up for the forums so I could ask someone for help!! Haha! So, here goes......
I recently started using Adobe CS2.
I signed up for the 30 day trial of RadLab by Totally Rad. It worked fine, but my trial expired before I could finish the photos I had been editing. So I uninstalled the RadLab trial, signed up for a new trial with a different e-mail address, and re-installed it. Only, this time, RadLab wouldn't work. So I contacted Totally Rad and the guy told me that RadLab won't work on CS2. It has to be CS3 or higher. (I'm still confused as to how RadLab worked for 30 days on my CS2 if it supposedly only works on CS3 or higher)...
So, now, I am looking to upgrade from CS2 to CS3... but I don't know where to look. I tried Google, but nothing seems to match what I'm looking for. I would hate to upgrade all the way up to CS5, because I don't think my PC could handle it. (I've been told that CS5 takes up a lot of room, and I don't think my computer is strong enough to hold it all. My memory capabilities are very limited. Even with CS2, I couldn't open/edit much all at once.)
I say all that, to ask this...
How do I go about upgrading from CS2 to CS3, and it not cost me an arm and a leg? I'm on a super-tight budget ($150 is the absolute highest I'm willing to go). I'm unemployed and money is extremely tight.
Thank you in advance for your help!!

Countrydust73 wrote:
I signed up for the 30 day trial of RadLab by Totally Rad. It worked fine, but my trial expired before I could finish the photos I had been editing. So I uninstalled the RadLab trial, signed up for a new trial with a different e-mail address, and re-installed it.
I don't want to burst your bubble about using Photoshop CS3, but I would expect any software with good trialware security to not work twice on the same system no matter whether you sign up with a different eMail address. They'd be stupid not to have it work that way.
If you need the software to get your project done, why not actually buy it?
You're no doubt expecting to derive value from your project... Shouldn't the people who worked to create the software you're using derive some value from their work as well?
I can appreciate your being on a budget, but the old saying "if you want to play you have to pay" comes to mind. I'm sorry to be blunt.
-Noel

Going from MacBook Pro to MacBook Air

I'm debating going from a 2006 15" MacBook Pro to the new 13" MacBook Air. (I watch a lot of tv and do some photo editing).
The screen size difference is the biggest thing that's holding me back. Has anyone else made this transition, and have opinions?
Thanks!

I too had an older 15" macbook pro, .....youll love the transition, forgetting all the improvements the AIR will have over your older PRO, it also has a sharper more contrasted LCD led backlit screen than your/my old Pro.
Most all agree that a sharper nicer slightly smaller screen is greeted better by users than a larger low contrast older screen.
To mention also.. fasters read / write speeds, better battery life by far than your old pro...etc etc.

Going from Pages to EPUB using InDesign?

Is there a guide for going from a Pages document to EPUB using InDesign? The target is a book that is over 105K words for 425 pages.
I am an absolute beginner with InDesign and I was hoping to more finely control the outcome of EPUB generation by using InDesign rather than outputting from Pages using Export to EPUB. Unfortunately, ID isn't quite as intuitive as I had hoped it would be and I've run up against the wall.
Do I load each chapter as a separate document and then collect them as a book file? Or can the book be loaded as one document? I've been trying as one document, but I can't it to appear in the main editing window. (It shows up fine in the story editing, but that gets tedious very quickly.)
Last, while ID creates EPUB files, can it generate a MOBI or AZW file for the Amazon Kindle? I found no references for in concerning ID in the documentation, but thought I'd ask anyway.

Thanks, Steve!
I've already been hand-building the CSS & EPUB files. I was just hoping that InDesign would make it easier. Clearly, that's not the case.
Apple's Pages does a very good job generating an EPUB which only requires a minimal amount of tweaking to the CSS to give it a final polish and further adjustments for e-readers other than an iOS device. Generating the MOBI/AZW for Kindle requires a bunch of jumping through hoops to prepare, which was what I was hoping to avoid.
A few days to release, I have plenty of time get get the ebooks ready.
A good heads up for any competent programmers out there—of which I am not—there is a huge market of self-publishing authors in need of a program that can take a RTF, Word or Pages formatted document and smoothly turn it into an EPUB or AZW file.

Conversion from Ai10 to CS3/4 resulting in text alignment differences

We are converting about 25,000 graphics from Ai10 to CS3. In doing so a small percentage, but still a significant number, are converting incorrectly. Some of the graphics that include text labels are converting with the text labels appearinglower on the new graphic than they do on the original. We can't find anything about the graphics that convert incorrectly that is different from the ones that convert ok.
Attached is an Ai10 file that converts incorrectly to CS3. If anyone can give me a clue why the text labels appear lower and give me a suggestion on how to avoid it it would be great.
Thanks in advance
Steve

Quickest, way I know is to open the .ai 10 file in CS3 or CS4 without updating, and Select All, Command shift O to outline all text. This may not be ideal if you still want to be able to edit the text, but because Adobe updated the text engine the text from older legacy files tends to jump in strange ways. The only other way is to open without updating and convert each text box by double clicking on the text box and in the dialog box stating "editing text may cause layout changes" click copy text object. Then the fun part is manually realigning all live text and reformatting the text to match the copy. When this is done you can go Type>Legacy text>Delete copies. This is what I have been doing to tiptoe through the conversion of legacy text. If there are any better methods I would love to hear them.

How do I Import footage from Premier Pro CS3 to After Effects?

Hi
As the subject says, how do I import footage from premier pro cs3 into after effects. I'm getting rather frustrated trying to figure this out.
Via copy & paste I can copy into after effects but this copys the whole of the track on the timeline, where as I just want 10 seconds copied. The 10 seconds I want to copy is a segment & was highlighted when I clicked copy.
Also when the full track gets copied, all my edits aren't copied & I get the raw track copied???
I've googled this, tried the "Add Dynamic Link" but all I want is to copy 10 seconds of footage from premier into after effects, add my effect & then copy it back, and I can't figure out how to do this simple thing
Any help
Thanks.

I am still not getting this.
I highlight the selection I want to copy into after effects. I copy & paste it & it pastes my entire footage without any off the edits I have made.
Having searched loads for this I can find no other answer than copy & paste.
Please please could you guy be more specific with your answers as I just can't figure this one?

Color balance looks different going from lightroom to photoshop which is correct?

color balance looks different going from lightroom to photoshop which is correct?

Besides calibrating you rmonitor:
Make sure that in PS you have selected ProPhoto RGB as Working Space.
Go > Edit > Color Settings.
LR uses ProPhoto RGB and tht cannot be changed. So you have to make sure that PS uses the same Working Space.
WW

Big problems exporting from Premiere Pro CS3

Hey all.
Would be massively grateful if anyone here could help me out. I'm in the process of trying to export a 23 and a half minute project from Premiere Pro CS3. I've tried exporting to different formats, (Quicktime, MPEG2, etc..) but keep arriving at the same conclusion. The process will freeze midway through, and I'm greeted by the following error messages:
"premiere pro debug event
premiere pro has encountered an error
[..\..\Src\PPixHandleUtilities.cpp-114]"
When I close that, another window pops up saying;
"export error
application failed to return a video frame.
cancelling the operation."
I'm not really sure where to go from here. Previously during the process of editing this project, I would occasionally get a message telling me that premiere pro was "running low on system memory". Fearing this to be the problem I was having while exporting, I attempted to export an extremely low quality version of the project, but arrived at the same conclusion. I also wondered if there was a corrupt frame or clip somewhere that was causing the issue, so I overlayed one whole transparent clip over the whole sequence and tried to export, but again, the same result.
I now have to put all my faith in you Adobe Wizards! Please ask me any questions that might help you to arrive at what may be causing the problem, I'll answer them the best I can
Many thanks!
Andy

>13.4GB free
FAR too small !!!
The program itself uses more than that for temporary working files
Also, unless you already have a 2nd hard drive or eSata external, you are below specification
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
Partition = Crash http://forums.adobe.com/thread/957286
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Going between CS4 and CS3

Greetings,
Once you've created a composition in a CS4 version of a program such as After Effects, are you able to open the comp in the CS3 version?
I know this problem arises with Adobe Audition when going from Audition 3 to any prior version, and I'm looking to go back to CS3 from CS4 (far too many bugs and I'm finding it far too unstable)
Thanks,
Sarah

I work for a production company in Denver. I have CS4 at work and CS3 at home, and I was unable to bring my AE comp from 4 to 3. It said that AE comp was unable to open on 3 due to it being from a newer version. FYI, I had bugs and terrible preview playback and some bugs, Today I updated my NVidia driver, switched the playback quality to draft quality (by right clicking on the preview window), and put the Quality/Performance marker a step closer to performance on my NVidia Control panel, which was under the regular control panel. CS4 seems to be working great now.

Problems exporting Animation codec from After Effects CS3 to FCP

Hi,
I wonder if anybody can help: I am having troubles with video transfer from After effects CS3 to FCP 6
my workflow is to edit and export in FCP as quicktime movie - work on the clip in AE and then export as Animation/best quality/Millions of colors+. The footage is SD Pal 1024 x 576.
the problem is that the files don't seem to play back properly in quicktime - very jagged and lots of ghosting. I assume this is due to the memory heavy features of the codec.
However any file over 10 seconds will not be imported into FCP natively and a message reads final cut pro does not support this file type.
I overcame this by opening the clip in quicktime and then exporting again with exactly the same settings - this then reads in FCP - although this seems over the top
I now want to work with a 10 min finished comp in FCP but when I try to do this it picks up the ghosting that had appeared when playback in quicktime. However when rendered/ exported from the FCP timeline it retains the ghosting
in short I can burn a successful DVD of the footage as is from AE but it is not suitable to FCP.
I have tried exporting the clip in quicktime as quicktime DV pal but this retains the ghosting. Is this a hard ware problem or is my work flow wrong?
thanks
Paul

Converting from A to B means either a lossy conversion or a significant increase in storage requirements (up to 5x with DV as the starting point). You are best served with keeping conversions to a minimum.
> cause this compressor doesn't like images
What is that based on?
> in several forums I have red that "automatik" inside of encore does often not work properly
This is in contradiction with the general feelings on this forum.

Going from LR2 to CS3 editing

Similar Messages

Maybe you are looking for