Going from Tiger OS to Snow Leopard OS - Will it work?
If this has been previously discussed I apologize. RIght now I'm running Tiger & want to bypass Leopard (too expensive) & go directly to Snow Leopard. Will I be able to do this? I just want to make sure before I order the software from Apple.
Thanks in advance!
Short answer ... yes, very doable
SL needs Intel processor, 1 GB memory minimum (some would argue 2 GB is a better fit, if possible).
Make a very good backup (preferably a clone) of your current drive before yo upgrade in case the unthinkable happens.
Some would say that is too big a jump for upgrade and you just use the full-install SL disk (Apple Store Online $29) for a "new install", and use Migration assistant to pull certain items from the clone.
Similar Messages
-
Can't play long voice memo after upgrading from Tiger OS to Snow Leopard OS
I have a voice memo that's 1.5 hrs long saved on my computer that I used to be able to play in iTunes & Quicktime, but ever since I upgraded from Tiger OS to Snow Leopard OS, the file will not play anymore. I tried installing quicktime 7 from the snow leopard optional installs but the file still didn't play. I also installed the VLC player which opened the file, but only played 7 minutes of it. When I try to open the file in quicktime it says that it can't play the file and that it is not a movie file, but my file is saved as a ".mov" file. Does anyone know how I can get the file to play again?
I have a voice memo that's 1.5 hrs long saved on my computer that I used to be able to play in iTunes & Quicktime, but ever since I upgraded from Tiger OS to Snow Leopard OS, the file will not play anymore. I tried installing quicktime 7 from the snow leopard optional installs but the file still didn't play. I also installed the VLC player which opened the file, but only played 7 minutes of it. When I try to open the file in quicktime it says that it can't play the file and that it is not a movie file, but my file is saved as a ".mov" file. Does anyone know how I can get the file to play again?
-
Can't print from Intel Mac w/Snow Leopard to HP 2600
Can't print from Intel Mac w/Snow Leopard to HP 2600. Upgraded from OS 10.4 and printer showed on printer list along with an Epson scanner. but continually shows printer as offline. I finally deleted the HP Color Laserjet 2600n from the printer list. When I attempted to re-install it, it doesn't find the printer at all. I haven't attempted to use the scanner. I also went to HP and downloaded the driver, no luck. I've restarted the computer multiple times, tried it with the printer on, and printer off, as well as pulled the usb cable in and out both ends. No error message on the printer display and it gpes through normal warmup until it shows the green light. I run software update and it shows no updates needed. Help!
Go down a few more posts to the question about the C7180. Answer:
"Re: iPhoto 08 + HP Photosmart C7180
Posted: Aug 19, 2007 1:26 PM in response to: Daniel_D
When you press print the first window is pretty basic.
When you select print on that the next window should have an advanced option.
Click that and see if any of the options in the 3rd dropdown box allow you to specify the 'paper tray'.
AC "
In this new windaow, click "advanced", go to "paper type/quality" and choose " best" and a photo paper. Then you will be able to choose a paper source (photo tray).
Once you have these settings, under presets do "save as", and you can choose the preset instead of going to advanced.
If you have the latest software and drivers downloaded from HP, this will work.
Scott -
How do I go from Mavericks back to Snow Leopard
I updated my late 2009 MacBook Pro to Mavericks as I thought the system efficiency upgrades the new OS tauted would be good, but alas my computer is super slow for ALL functions. I won't give details, because now after the fact, I'm learning others have had this problems. I don't have time to hope it will improve, I want to go straight back to Snow Leopard and will wait for Mavericks to have more updates, improvements and better reviews on speed.
Technical question on how to go back/ reinstall Snow Leopard?
First my stats:
I have 2 partitions on my MacBook Pro: 1. my usual use 400gb partition, which was on snow leopard and went up to Mavericks, and 2. 100gb "test" partition running 10.6.8.
I have an external backup hard drive with Time Machine backup of the 400GB partition.
There was an apple support article - http://support.apple.com/kb/PH14176 - that said to revert to previous OS you simply:
Choose Apple menu > Restart. Once your Mac restarts (and the gray screen appears), hold down the Command (⌘) and R keys.
Select “Restore from a Time Machine Backup,” then click Continue.
Is this indeed going to work for me? Or will it delete the 2 partitions?
Or do I pull out the Snow Leopard install disc and launch Disk Utility and erase the partition drive and install snow leopard that way?
Would like some confirmation on the best way to go before proceeding, but hoping to tackle this right away.
Thanks!Here is teh entrecheck report. Can you advise on any issues or items that defeinitely and easily can be addressed? Is there anything here that could be causing the tremendously slow, nearly not function computer with Mavericks (I feel like I'm back in the days of OS9), which was FINE on Snow Leopard?
Hardware Information:
MacBook Pro (15-inch, Mid 2009)
MacBook Pro - model: MacBookPro5,3
1 2.8 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
NVIDIA GeForce 9600M GT - VRAM: 512 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:9:51
Disk Information:
Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 397.17 GB (92.91 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
Macintosh HD 2 (disk0s4) /Volumes/Macintosh HD 2: 101.94 GB (68.08 GB free)
MATSHITADVD-R UJ-868
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
ALCOR Generic USB Hub
HP Deskjet 6940 series
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
[System] com.google.keystone.agent.plist 3rd-Party support link
User Launch Agents:
[not loaded] openlaunch.plist 3rd-Party support link
User Login Items:
Dropbox
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 2.4.4.2 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
Google Earth Web Plug-in: Version: 7.0 3rd-Party support link
googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
iPhotoPhotocast: Version: 7.0
Safari Extensions:
Evernote Web Clipper: Version: 6.1
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
Picasa: Version: 1.0 3rd-Party support link
Unity Player: Version: UnityPlayer version 1.6.2 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Growl 3rd-Party support link
handyPrint 3rd-Party support link
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
Audacity: Version: 2.0.5.0 - SDK 10.4 3rd-Party support link
/Applications/Audacity/Audacity.app
/Applications/Microsoft Office 2011/Office
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Setup Assistant: Version: 14.2.0 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Smilebox: Version: 1.0.0.21770 - SDK 10.4 3rd-Party support link
Picasa: Version: 3.9.16 - SDK 10.4 3rd-Party support link
MultiMode Cocoa: Version: 6.3.1 - SDK 10.5 3rd-Party support link
Time Machine:
Skip System Files: NO
Auto backup: YES
Time Machine not configured!
Top Processes by CPU:
4% OverDrive Media Console
3% WindowServer
1% EtreCheck
1% mds_stores
1% mds
Top Processes by Memory:
336 MB mds_stores
143 MB com.apple.IconServicesAgent
123 MB Dropbox
106 MB com.apple.WebKit.WebContent
70 MB Safari
Virtual Memory Information:
1.17 GB Free RAM
1.47 GB Active RAM
619 MB Inactive RAM
520 MB Wired RAM
371 MB Page-ins
0 B Page-outs
One other issue that concerns me. I launched Activity Monitor because the computer was so slow and it shows the "memory used: 3.99GB" out of "Physical Memory: 4:00GB" seems like it is being used up (though Entrcheck may be giving different information), which doesn't make sense as I wasn't running too many, and not energy/memory hogging programs (i.e. just Mail, Contact, Safari, & OverDrive).
Any thoughts on this? -
Problems deleting pdf's generated from files off of Snow Leopard Server
The small design studio I work at has just upgraded from G5's running 10.4 Tiger, working off Tiger Server, to new iMacs running 10.6 Snow Leopard and a Mac Mini Server, on Snow Leopard Server.
Normal working practice is to open files off the server across the network, making changes and saving them back down. Most of the time, a pdf will be generated from the file to send to the client when copy changes have been made, then saving down the pdf file to the iMac to email to the client.
The issue is now that when the pdf has been emailed, attempting to delete it brings up a warning window that 'You do not have sufficient accesses privileges to delete the file' and this then has to be done by selecting secure empty trash.
We are all registered users on the Mac Mini Server and this was not an issue we had when using Tiger.
Could anyone suggest any setting changes that would be required to get around this issue?
As a note, all the work files were originally on a older G4 being used as a sever and were copied to the new Mac Mini Server, that was set up as a new machine and was not done via transfer files.
Thanks
BenHello Ben,
I'm very sorry, but this is not the correct forum in which to post your question! Universal Access is the facility for ensuring that all Mac users can benefit fully from their machines, regardless of disability.
Try Snow Leopard Server—Installation, Setup and Migration instead!
Cheers,
Archie -
I have been using Tiger's Mail program as my main mail application. Now I need to get my mail on my Macbook Pro.
Problem is: Mail in Tiger has an option under "Edit", of "Paste as HTML". This works beautifully.
In Snow Leopard this option has been removed, and although "Paste" does sort of work (with adding attachments for images), I get my quoted message mangled in replies from recipients of my html mails.
Question: Can I instal and use Tiger Mail on Snow Leopard, and how should I go about it?You had me very excited for a moment there, Tom, when I saw how elegantly Safari does this, but...
I do my html in Pagespinner, then preview in Safari. Safari > File > Mail Contents of this Page, does not deliver my images. (I suppose I could link to image files on a web server...)
On the other hand, in Tiger, I select all, and copy in Safari, then Edit > Paste as html, in Mail. And my friends receive a perfect html email, with images and formatting.
I just got my little G4 iBook back, and Tiger with it, so once again, I can do my thing , but I would dearly love a similarly elegant solution in Snow Leopard. -
I have a Mac Pro with four hard drives. I currently have Lion installed on one hard drive. I want to have the option to boot from either Lion or Snow Leopard. How can I do this?
It's best to install Snow Leopard on one of the three remain drives without an Operating System.
You can then install the applications you need from the original media. Create a User Account using Setup Assistant.
Do you want to migrate User Accounts from the OSX LIon boot drive, or are you keeping the User Accounts separate?
Dual-booting just requires holding the option key during startup and selecting either Lion or Snow Leopard. -
i reformatted my mac pro from lion back to snow leopard how do i get my music back. i have it on my iphone and when i sync up i still do not have my music on my mac how do i transfer it back to my mac.
Wow, you didn't make a backup of your files first?
You shoudl have come here first for help before doing that.
https://discussions.apple.com/message/16276201#16276201
All I can say is make sure you have the same account name on the computer like before, even if you have to create a new user under System Preferences>accounts, then log into your itunes account with that and try to reverse sync from the iPhone like you would normally.
Apple doesn't expect one to go backwards, so they are not all that friendly, you may have to ask around on MacRumors for third party software that can reverse sync from iOS devices.
Good luck -
Exporting OS X Mail from Mountain Lion to Snow Leopard
After upgrading to Mountain Lion, I partitioned my iMac HD to have two partitions: Macintosh HD has Mountain Lion; I reinstalled Snow Leopard on Macintosh HD 2. Best part: you can access your user-created files from EITHER disk partition. But not so OS X Mail. I wanted to revert to Snow Leopard, since I don't like the iOS-like Mountain Lion (swipe THIS!), but Mail was a problem since all my Snow Leopard Mail was successfully migrated over to Mountain Lion during upgrade. But I think I found a way to Export Mail from ML to (a clean install of) SL.
Try this:
1. Open Mail in ML. For each folder you wish to have back in SL, Export it to your ML Desktop as an .mbox file. Depending on the folder size, this can take from a few seconds to several minutes. You'll see an .mbox icon for the particular folder on your Desktop. If the word "partial" appears between the folder name and the .mbox suffix, wait a few moments for the Export to complete, at which time the word "partial" will disappear. E.g., for a folder named "Mary", if it's a huge one, the icon will first appear as "Mary.partial.mbox"; when the Export is done, you'll see "Mary.mbox".
2. When you've Exported all your desired folders as above, you can exit ML and re-start your Mac in SL. Open Mail in Snow Leopard, and once again, for each file you just Exported in ML to the Desktop there, select "Import Data From Apple Mail" and choose the folder from the Desktop in ML to which your mboxes were Exported. When the Import starts, you can see via a progress bar how far along it is. When done, you'll see a new folder in your SL Mail called "Import"; click on it to reveal the folder you just Imported!
3. Then drag the folder you just Imported out of the Import folder to "On My Mac" in SL Mail; you can then delete the Import folder.
4. Repeat until all your folders are where you want them (in SL).
5. When you have time, go back into ML and clear all those .mbox files from your Desktop.
There MAY be an easier way, but this is what worked for me.The iOS view vs classic view in Mail is not the problem; I've already configured for classic view.
Mountain Lion itself is.
My short list (to date) of crappy Mountain Lion behavior; items marked with a double asterisk (**)represent the worst of Mountain Lion for me.
** No up/down arrows in scroll bar slider;
Expose` not as easy to navigate as in Snow Leopard;
Mail does not request passwords for either receive or send;
No "Save Draft" icon in Mail compose window (workaround: use command-s);
"Save As" selection missing in most app menus;
No separate Search window in Safari (workaround: use Firefox or Opera);
** Can't export Mail from Mountain Lion into Snow Leopard if downgrading (I compiled this list before I stumbled on the method in this thread, but I'd prefer to effect this with Unix symbolic links);
iWork 09 seems to have "circled the wagons" re compatibility with MS Office or LibreOffice (workaround: just use Libreoffice); -
My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What is the problem? What should I do?
Thanks !!
AlainCould that read " . . . could not access . . ."? If so, try repairing your backups, per #A5 in Time Machine - Troubleshooting.
If not, or if that doesn't help, see #A1 there. Use the TM Buddy widget it details to copy and post the messages here. -
If my computer is still running on Tiger, do i have to get the mac box set in order to run snow leopard on my computer? I guess my question is can i just buy the snow leopard, and have that work fine, without having to buy the mac box set?
Welcome to Apple Discussions!
Here are the short answers: Legally -NO, Technically -YES.
The Snow Leopard license agreement says that you must be running Leopard in order to install the regular version. Technically, the regular version will install fine. -
I recently updated? to Lion from 10.6.8(snow leopard), and things seem to be running slower. Has anyone had similar problems? I have Feb 2011 Macbook pro 13" 2.3 Ghz.
As Shootist pointed out, the system uses more power.
However, initially it will reindex the hard drive for spotlight, which will slow things down temporarily.
It also must rebuild caches that eventually will speed things up.
If it has completed indexing the hard drive (no dot pulsing in the spyglass), then there might be something wrong.
Start by booting into the Recovery HD (a partition created with Lion that has Disk Utility and reinstallation options) by holding down cmd-r when you restart. You can let go when the gray screen appears.
When it boots, select Disk Utility and Repair the drive.
If that doesn't speed things up, try re-installing the OS from the same Recovery HD. It won't delete any of your files, but it has helped some people whose Macs ran slow after installing Lion.
Also, how much memory do you have? Lion needs RAM so maxing your Mac out might also help. -
I'm thinking of upgrading from v10.6.8 Snow Leopard to OS X Yosemite. I know, I'm years behind, but it has become a necessity. My Mac is becoming slow and is incompatible with many softwares and websites. Does anyone know of any problems associated with this upgrade? What are the implications and/or consequences of installing Yosemite? Does it effect functionality of v10.6.8 software or hardware? Are there any precautions I should take before the installation? I have read some posts about Macs slowing right down after installing Yosemite. Any insights and information (in layman's terms please!) would be very useful. Thanks.
Huge thanks for your response Michel. I apologise for the delay in getting back to you. I have done as you suggested, the details are pasted below. Clearly there are some applications I need to remove and no doubt my HD could do with a 'spring clean'. My Mac 'Safe Booted' when I turned it on this morning.
I use many different softwares, some web-based. The decision to upgrade to OSX Yosemite is because I was unable to attend a Webinar this week using GoToMeeting downloadable software. GoToMeeting have upgraded their system and my OS is no longer supported. Other websites like VImeo no longer support my version of Safari. I tend to use Chrome if Safari isn't compatible.
Problem description:
I'm thinking of upgrading from v10.6.8 Snow Leopard to OS X Yosemite. However I have noticed that my MacBook Pro becoming ‘slow’ over the last 3 weeks and therefore might have some issues that need to be resolved before I even consider installing OSX Yosemite. Over the last week my Mac has Safe Booted on three occasions, so clearly there’s a ‘glitch’ occurring.
EtreCheck version: 2.1.1 (104)
Report generated 6 December 2014 10:21:01 GMT
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6490M - VRAM: 256 MB
Color LCD 1440 x 900
Intel HD Graphics 3000 - VRAM: 384 MB
System Software: ℹ️
Mac OS X 10.6.8 (10K549) - Uptime: 0:35:42
Disk Information: ℹ️
Hitachi HTS545050B9A302 disk0 : (465.76 GB)
S.M.A.R.T. Status: Verified
- (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.76 GB (236.21 GB free)
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Microsoft Microsoft® Nano Transceiver v2.0
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple, Inc. MacBook Pro
Configuration files: ℹ️
/etc/launchd.conf - Exists
Adware: ℹ️
Geneio [Remove]
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.1) [Support]
[loaded] com.microsoft.driver.MicrosoftMouse (8.2) [Support]
/System/Library/Extensions/MicrosoftMouse.kext/Contents/PlugIns
[not loaded] com.microsoft.driver.MicrosoftMouseBluetooth (8.2) [Support]
[loaded] com.microsoft.driver.MicrosoftMouseUSB (8.2) [Support]
Startup Items: ℹ️
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
[not loaded] org.samba.winbindd.plist [Support]
Launch Agents: ℹ️
[running] com.flipvideo.FlipShare.AutoRun.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[running] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.flipvideo.FlipShareServer.launchd.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[failed] [email protected] [Details]
[invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]
[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.update.plist Adware! [Remove]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Google Earth Web Plug-in: Version: 7.1 [Support]
OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
RealPlayer Plugin: Version: Unknown
AdobePDFViewerNPAPI: Version: 10.1.12 [Support]
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
QuickTime Plugin: Version: 7.6.6
AdobePDFViewer: Version: 10.1.12 [Support]
CANONiMAGEGATEWAYDL: Version: 2.1.0.1 [Support]
CANONiMAGEGATEWAYLI: Version: 2.1.0.1 [Support]
EPPEX Plugin: Version: 3.0.5.0 [Support]
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
User internet Plug-ins: ℹ️
BrowserPlus_2.9.8: Version: 2.9.8 [Support]
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
Safari Extensions: ℹ️
Omnibar Adware! [Remove]
My eBay Manager
Add To Amazon Wish List
Audio Plug-ins: ℹ️
iSightAudio: Version: 7.6.6
3rd Party Preference Panes: ℹ️
3ivx MPEG-4 [Support]
BrowserPlus [Support]
Flash Player [Support]
Microsoft Mouse [Support]
Perian [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ℹ️
26% Safari
2% WindowServer
2% activitymonitord
1% PluginProcess
0% WebProcess
Top Processes by Memory: ℹ️
405 MB WebProcess
301 MB Safari
125 MB Mail
116 MB rapportd
116 MB mds
Virtual Memory Information: ℹ️
1.02 GB Free RAM
1.78 GB Active RAM
429 MB Inactive RAM
1.07 GB Wired RAM
422 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 6, 2014, 09:45:53 AM Self test - passed
Dec 5, 2014, 11:49:18 PM QTKitServer_2014-12-05-234918_[redacted].crash -
I just puchased a used 2008 MacPro 2.8 ghz 8 core and it has Mountain Lion installed on it. I want to go back to Snow Leopard because it is a better stable OS for using Final Cut Pro 7. I just bought the Snow Leopard Discs to install. I need to erase the hard drive and install Snow Leopard. Any help on how
to do this? Thank you.Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the
Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status
of the drive in DU's status area. If it does not say "Verified" then
the drive is failing or has failed and will need replacing. SMART
info will not be reported on external drives. Otherwise, click on
the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
from the drop down menu to one. Set the format type to Mac OS
Extended (Journaled.) Click on the Options button, set the
partition scheme to GUID then click on the OK button. Click on
the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files. -
Mail has gone crazy. Header's and messages are mixed up. New Mac Book Pro. Migrated files from Time machine running snow leopard. Reinstall or new computer needed?
Ok; I'm not sure what you're doing. 36 hours is rather long. Seems like a new migration. Not what I intended.
Here's what I intended: from the newly-migrated and apparently-corrupt environment, create a new user, not related to any existing user, nor any migration-created user, or any other user for that matter. That is, use > System Preferences > Users and Groups, authenticate yourself by clicking on the padlock, and then click the + and create a wholly new user. Then log in under that user and establish the mail access.
36 hours? I'm wondering if there's an error or an exceedingly slow network here? Or a really, really slow disk? Or a sick backup? (WiFi isn't the path I'd usually choose, either.)
Failing the attempted second migration, I'd try a different tactic. Does your existing (old) system work? If so, I'd bypass the backup and connect an external (scratch) USB disk drive to the (old) sstem and then boot and use Disk Utility booted from the installer DVD disk or boot and use Disk Utility from the recovery partition or booted from a recovery partition created on some other external storage (details here vary by the OS X version and what hardware you have), and perform a full-disk backup of your original internal disk to (scratch) external storage. (Make sure you get the source and target disks chosen correctly here; copying the wrong way — from the scratch disk to your existing disk — will clobber your data!) In esssence, this will clone your existing boot disk. Then dismount the (formerly-scratch) external disk, transfer it over to the new system, and use it as the source of the migration, by performing a fresh OS X installation on the new system.
Target Disk Mode is also sometimes an option for accessing the disk for a migration, but that requires the right cable, and requires systems that have the same external connection; newer MacBook Pro systems use Thunderbolt for this, and older systems tend to use FireWire. And I'm guessing you don't have compatible hardware.
The details here can and do vary by your OS X versions and your particular Mac systems — if you'll identify the specific models and hardware, somebody might be able to better tailor the above (fairly generic) sequence to your particular configuration.
Maybe you are looking for
-
I tried to set up my wi fi but i typed in the wrong password, how can i change it?
My ipad prompted me to enter the password for my wifi network but of course i typed in the wrong one... now it is not giving me an option to retype it in for this wifi network it just opens pop up screen that says "unable to connect" my other ipad
-
Keep getting error message when trying to publish imovie '08
I keep getting the error code -34 when trying to publish a medium size movie to itunes. Any ideas on what to do now? thanks,
-
When printing a front panel the default page size is letter. My windows printer has A4 as default page size. LabView always overrides my printer's default page size to letter. The problem: I want to print programmatically the front panel. With the pa
-
Auto-Mapping with Full Access Mailboxes-not working in exchange 2010 clients outlook 2013
hello, I have exchange server 2010, the clients are running outlook 2013, I set an mailbox for automapping (full access) but when i restart client it does not appear in the client. i also did the command in the exchange shell, no errors. how can i fi
-
I am trying to dual boot Arch Linux and Ubuntu. When I try to boot there is no option for Arch. I have added it to the menu.lst file in ubuntu. Arch is installed on sdb1 according to sudo fdisk -l I need help!